Prijemalo

AJCE AS600H GREIFER GRAPPLE PINCE DE TRI

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 44.000 kg, dolžina rotorja: 2.800 mm, moč: 315 kW (428,28 KM), največja hitrost vrtenja: 87 obr/min, - MERAK 2800-2 with 315 kW - 116PR cutting system - PG190 screen (can be changed according to customer requirements) - Feed hopper - Dust suppression - Electric central lubrication - Hydraulic circuit protection - Overband neodymium magnetic separator – HP Gjdpfx Afjugf Dweqoil - Rubberized, bolted track pads on crawler chassis

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): approx. 1.9 x 2.6 x 1.0 m Machine transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 pcs. Bending angles: 40°, 60°, 75° Bar diameter: angle form = Ø 12 - 50 mm, double angle = Ø 12 - 35 mm Operation via control panel with touch screen Bending plate: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Pin holes: Ø 48 mm (16 pcs.) - Center pin: Ø 50 x 94 mm Stop bars: - 2 pcs., length: 840 mm - Manual adjustment: 100 mm - 13 holes, Ø 48 mm Gijdpou Ibu Rjfx Afqjl Accessories: Bending formers: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for bending plate 8x counterholders (various forms) 1x bending tray

Leto izdelave: 2018, Stanje: rabljeno, Novo: Da Namen uporabe: Gradbeništvo Gsdpfx Ajg Uqp Iefqjil Za več informacij se obrnite na prodajo pri KEY-TEC.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling Gedpfju Nw Ezox Afqoil with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Stanje: novo, ELMAG Stone Band Saw STBS-500 STBS for Dry Cutting (Bricks, Aerated Concrete, Insulation Material) The stone band saws of the STBS series are specifically designed for use on construction sites. When used for dry cutting, they are suitable for precise processing of materials such as aerated concrete, bricks, lightweight clay blocks, expanded clay, and wood, but also for insulation boards like Styropor and Styrodur. ADVANTAGES • Extraction port for dust extraction available • Saw band tension easily and optimally adjustable with handwheel • Includes forklift pockets and lifting eye • Constant saw band tension and 440 mm running wheels for reduced risk of band breakage and precise cuts • Direct drive with geared motor on separate motor console • Automatic saw band shutdown at end of cut • Machine stops when doors are opened Gedpfxjt Egfzj Afqoil • Short band change times • Straight, mitre, and manual contour cuts possible • Precise blade guide, adjustable to stone height • Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height: 500 mm Cutting length: 660 mm Angle: 0 - 45° Saw band dimensions: 3850x27 mm Table size: 710x1060 mm Nominal power: 1.85 kW Power supply: 230/50 V/Hz Dimensions: 1050x900x1840 mm Weight: 203 kg

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Godjq I Rkdopfx Afqsil Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Premer rotorja: cca 500 mm Elektromotor: 250 kW

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 4.826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connections: 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank: 950 liters Discharge conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally positioned wear strips 24 V electric control system Additional electric pump for operating the following functions when the engine is off: Raise/lower/fold discharge conveyor, open/close comb flap, open/close comb, lift/lower optional permanent magnet belt, lift/lower optional folding hopper Complete radio remote control Large side GRP maintenance doors Easy-access engine compartment with LED lighting Hydraulically reversible fan Loading protection on both sides Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special equipment: 500 mm track undercarriage unit Track undercarriage 500 mm flat Shredding system Size "L" – VARIOMAT Gedpfevnmldsx Afqsil Size "L" – "Limiter" (20 pieces) Discharge conveyor: 7 m length, 1,200 mm wide LED lighting package for engine compartment and rear Watering system with hopper extension H = 300 mm Frame for overband magnet 2 t permanent overband magnet

Leto izdelave: 2021, Stanje: novo, Complete solution for the transport of bulk materials as well as demetallization of magnetic metal contaminants. Aluminum incline conveyor belt including substructure Incline start area at ground level (adjustable) Discharge height: 1800 mm (adjustable) Construction: height-adjustable Structure includes suspension for overhead magnetic separator DMPM1200 Conveyor belt width: 500 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt including carriers and wave edge Drive: 0.25 kW motor (adjustable), speed 0.3 m/s Power supply: 220/240V, 50Hz, protection class IP54 Drive and components ready for connection, motor control optional 6x height-adjustable machine feet for alignment Wave edge: 40x35 mm T-20 cleats - 400 mm spacing 2-ply construction for exceptional transverse stability Our core competence lies in supplying customers exactly what they need. We work hand in hand with our clients to develop customer-specific, individual solutions and provide tailored systems from our own production. Gsdshh A Iyjpfx Afqoil Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overhead magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overhead magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnet, filtration systems.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 17.526 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 29.900 kg, število rezil: 112, dolžina elektro omare: 1.500 mm, dolžina rotorja: 2.800 mm, moč: 2 kW (2,72 KM), največja hitrost vrtenja: 112 obr/min, LINDNER POLARIS 2800 je zmogljiv, visoko zmogljiv enogredni drobilec, ki se uporablja predvsem za drobljenje odpadkov s tujimi deli – na primer predhodno obdelanih komunalnih, komercialnih in industrijskih odpadkov ter kosovnih odpadkov itd. Končni izhodni material je definirana granulatna frakcija, ki jo je mogoče neposredno uporabiti za sežig. POLARIS 2800 je mogoče optimalno prilagoditi različnim aplikacijam z individualno konfiguracijo in opremo. Gedpfx Afewhyygoqsil

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, skupna masa: 4.000 kg, vhodna napetost: 380 V, moč: 26 kW (35,35 KM), višina izmeta: 1.000 mm, širina odpiranja: 600 mm, dolžina rotorja: 1.000 mm,