Batni kompresor

Aircraft Hoku BK 119-270-10-V-Palette

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. Hodpfefxyhfex Ag Toi In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, Pec za pizzu s dvije etaže, napom i komorom za fermentaciju GMG Komora za pečenje u potpunosti izrađena od vatrostalnog kamena Raspon temperature: 50 do 400 °C Prednja strana od nehrđajućeg čelika Digitalno upravljanje Hedpfx Agjuu H Alo Tji Zasebno podešavanje gornje i donje topline Digitalno nadgledanje postavki gornje i donje topline Digitalni sustav za kodove grešaka Vrata otporna na visoke temperature, ojačana oprugom Dvostruko ostakljena vrata za poboljšanu izolaciju i cirkulaciju zraka Vanjske dimenzije: 149x110x194 cm Unutarnje dimenzije: 105x70x15 cm Električna snaga: 2 x 8 kW - 3NAC I 400 V Fermentacijska komora: 149 x 93 x 90 cm - 3 kW i 230 V Težina: 500 kg

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Hjdpfsd Du T Iex Ag Toi Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Leto izdelave: 2017, Stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) Hedpod H Dr Sefx Ag Tji The compressor is used, built in 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Dimensions (L x W x H): 810 x 460 x 830 mm Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.

Stanje: novo, Swing diameter: 400 mm Turning length: 1,000 mm Speed range: 70 – 2,000 rpm Weight approx.: 500 kg Description: - Lead- and feed-screw lathe features a robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing achieved through heavily ribbed GG cast iron - Hardened and ground face spindle ensures high accuracy and durability - High material removal rates during rough machining enable production of fine surfaces and tight tolerances - Wide range of threads and feeds without requiring a gear change in the change gear compartment - Bed guideways hardened and precision-ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic brake for the main spindle - All controls (electrical) are centrally accessible - 4-position longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA 21 - User-friendly membrane keypad, splash-proof, sealed, and anti-glare - Increased working accuracy - Reduced error rate - X, Y, Z0, and Z-axes each with 8-digit display - Glass scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground - Shafts run on needle bearings - All components lubricated in an oil bath Apron – Housing fully sealed - Safety feature to prevent simultaneous operation of threading and feed mechanism Tailstock – Hardened and ground quill, generously dimensioned, quill with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Full illumination of the work area Main spindle – Perfectly concentric running, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Hodpod Eaukofx Ag Tji Operator panel – User-friendly membrane keypad - Machine lamp - Coolant pump - Direct drive - Two-speed motor control - Emergency stop button Coolant tank – Removable, level indicator, easy and complete draining/cleaning Control cabinet – Clearly arranged, 24V DC power supply, all contactors and relays from Schneider or Siemens Chip tray – Hinged, easy chip cleaning Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6 to MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phase(s): 3-phase Current type: AC Network frequency: 50 Hz Spindle mounting: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Distance between centres: 1,000 mm Swing over bed: 400 mm

Stanje: rabljeno, Leto izdelave: 1988, Plate width: 2000 mm Plate depth: 3500 mm Plate height: 270 mm Hjdpfxjiiii Sj Ag Tsi Weight: 5.5 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the creation of a video is not possible. Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, sending additional pictures is not possible. +++++

Stanje: novo, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connected load: 230 V Machine weight: approx. 8.6 kg Hjdpfxoupxkwj Ag Tji Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Weight: 8.6 kg

Stanje: rabljeno, Leto izdelave: 1999, Sammelhefter / Saddle Stitcher Heidelberg ST 100.1, Baujahr 1999 - 8 Anleger DVA (davon 4 Doppelanleger) / 8 Feeder DVA (4x Double Feeder) - 1 Umschlagfalzanleger UFA / 1 Cover Feeder UFA Hsdpoqpplwjfx Ag Toi - Heftstation / Stitching Unit Heidelberg 100.1 - Dreischneider / Three-Knife Trimmer - Bandauslage / Band Delivery - Inkl. Kompressor / Includes Compressor - 2x Hohner Heftköpfe / 2x Hohner Stitching Heads - Format min. (unbeschnitten) / Size min. (uncut): 89 x 120 mm - Format max. (unbeschnitten) / Size max. (uncut): 305 x 349 mm Online-Video-Inspektion per Skype-Video möglich. Wir freuen uns über Ihren Besuch – weitere Maschinen auf Lager. Sofort verfügbar – Besichtigung möglich. Lagerort: Emskirchen / Nürnberg – Testlauf möglich.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Enosmerni tok, skupna širina: 370 mm, skupna dolžina: 180 mm, skupna višina: 190 mm, vhodna napetost: 230 V, največja hitrost vrtenja: 5.300 obr/min, skupna masa: 10 kg, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, moč: 0,18 kW (0,24 KM), premer brušenja: 13 mm, Grinding of drills with a diameter from 2 mm to 13 mm Adjustable angle ----- 90° and 135° Grinding speed ----- 5300 rpm Grinding wheel ----- CBN 200 Motor ----- 230V/1Ph/180W Hsdpfx Asga T D Tjg Tei Weight ----- 10 kg

Stanje: novo, Holzkraft VPS 2241 VR Vertical Panel Saw 5600241 Precision Vertical Panel Saw - Smooth and ergonomic operation - Scoring unit for tear-free cutting quality - Manual slat rack retraction via lever - Continuous central workpiece support - Two cutting guides/stops - Transport rollers lifted via foot pedal for easy moving of heavy panels without damage - Fixed material support for stable workpiece positioning - Modular welded machine frame, torsion-resistant and self-supporting - Saw unit with chain guide and two operating levers - Large opening for easy saw blade changes TECHNICAL DATA: Hedpekktcfsfx Ag Tsi General Information - Cutting Height: 2200 mm - Cutting Length: 4100 mm - Cutting Depth: 60 mm - Saw Blade Diameter: 250 mm - Saw Blade Speed: 4800 rpm - Scoring Blade Diameter: 80 mm - Scoring Blade Speed: 8500 rpm - Stops: 2 pcs - Sound Pressure Level: 89.2 dB(A) Dimensions and Weights - Height (max): 3100 mm - Length (approx.): 5300 mm - Width/Depth (approx.): 1800 mm - Height (approx.): 3000 mm - Weight (net, approx.): 600 kg Extraction Connection - Extraction Port Diameter: 1 x 100 mm - Minimum Air Volume for Extraction: 1000 m³/h - Minimum Air Velocity: 20 m/s Electrical Data - Main Drive Power: 3 kW - Rated Voltage: 400 V - Mains Frequency: 50 Hz SCOPE OF DELIVERY: - Saw Blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal - Scoring Blade Ø 80 x 2.8-3.6 mm Z20 Holzkraft Authorized Dealer – Accessories available on request!