Hidravlične giljotinske škarje

ADIRA GH000640

Stanje: novo, Leto izdelave: 2025, Protec welding turntable, 5000 kg load capacity Continuously variable speed control: 0.05 - 0.5 rpm Hand-held remote control Height: 600 mm Diameter: 1500 mm Nwsdpsid Szcefx Abrjh Foot pedal remote control available at extra cost

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, Električna upogibna stiskalnica v dobrem stanju z avtomatsko zadnjo oporo. Specifikacija Model: SCHRÖDER MAKU Leto: 2022 Izdelano v Nemčiji Delovna dolžina: 3.200 mm Debelina upogiba: 1,5 mm Orodje za upogibno gred: 10 in 25 mm Krmilnik: Classic Bend Motor: 2,5 kVA Teža: 2,7 t. Nodpfx Abey Ucycsrswh Če imate dodatna vprašanja, vam z veseljem odgovorimo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 87.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 775 kg, skupna dolžina: 1.770 mm, skupna širina: 900 mm, skupna višina: 1.530 mm, vrsta goriva: električni, volumenski pretok: 190 m³/h, obratovalni tlak: 8 letvica, tlak (maks.): 10 letvica, raven hrupa: 68 dB, vrsta hlajenja: zrak, Oprema: hladilni sušilnik, Manufacturer: Kaeser ASD 32T Screw Compressor + Refrigeration Dryer Regularly serviced!!! Complete documentation Nsdpfx Aei E H Ikebrowh Year of manufacture: 2008 Nominal pressure: 8 bar Air flow rate: 3.16 m³/min Air output: 189.6 m³/hour Operating hours: 87,000 Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400 V / 3 Ph, 36 A Power: 18.5 kW Motor speed: 2,945 rpm Ambient temperature: 3 / 45°C Machine weight: 745 kg Machine dimensions: 1,770 x 900 x 1,530 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 31.411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine This punch-laser combination machine allows the flexibility of laser cutting to be combined with the advantages of punching. The simultaneous application of these two cutting technologies opens up numerous new possibilities: even complex sheet metal components can be produced. Technical Data - Punching force: 165 kN - Maximum sheet size (X, Y): 2500 mm x 1250 mm - Maximum sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 to M8 - Laser power: 2000 W - Number of tool stations: 18 Nwedpfx Aboycuypjreh - Tool change time (per tool): 3.9 s - Tool change time (for MultiTool): 2.2 s - Positional accuracy: ± 0.1 mm - Repeat accuracy: ±0.03 mm For optimum surface quality of the sheet metal components, the machine is equipped with a brush table and rollers around the forming tools. The MultiTool tool holders can accommodate up to 180 different forming tools. Thanks to shorter production cycles and lower energy consumption, the laser-punch combination machine enables lower part costs compared to flatbed laser cutting systems, ensuring greater economic efficiency. This equipment is ideal for the efficient, high-volume production of complex sheet metal parts. The laser cutting head allows for the cutting of intricate shapes, creates high-quality edges, and can be used when the required profile punching tool is not available.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Table longitudinal travel: 1,530 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg incl. clamping Maximum traverse: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, modern, and future-proof control system. Nwodpfx Asuxftrsbrjh Photo shows machine already delivered with special options. - Operation via touch panel is exceptionally simple. - Symbols on the control panel are virtually identical to the original control, thus no retraining required. - Diagnostic function showing PLC messages and digital I/O. - Dressing function can be expanded or adapted as per customer request. - Spindle-oriented stop for the workpiece spindle available on request. - New maximum infeed of 40 mm, extendable on demand. - Digital readout on 2 axes. Resolution x-axis: 0.5 μm Options: - Encoder with digital display on workpiece headstock - Encoder with digital display on grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the x-axis. Hydraulic table longitudinal movement and rapid traverse. Flexible application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum protection target must be determined via a risk assessment in accordance with BetrSichV.

Stanje: novo, Leto izdelave: 2025, najv. debelina jeklene pločevine: 6 mm, dolžina rezanja (maks.): 3.050 mm, Guillotine Shear: Immediately Available! General Performance Features: - Cutting length: 3100 mm - Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) - Side frame throat depth: 50 mm - Strokes per minute: 15 - Cutting angle: 1° - Number of hold-downs: 16 - Hold-down pressure: 14 tons - Backgauge range: Up to 1000 mm - Backgauge speed: 200 mm/s - Motor power: 15 kW - Oil tank capacity: 200 liters - Support arms: 2 units - Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and Weight: - Length: 4110 mm - Width: 2200 mm - Total width (with support arm and rear safety guard): 3700 mm - Height: 2100 mm - Weight: 7650 kg This guillotine shear is the perfect addition to your workshop, taking both efficiency and precision to the next level. Secure this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized offer! Nsdpforx Sydex Abrewh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Brand: Oerlikon / SAF Model: LP100 Year: 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm Rotational speed: 100-1200 mm/min Wheel width: 235 mm Wheel diameter: 450 mm Distance between travel wheels: 1930 mm (between flanges) Travel speed: 4 m/min Equipped with wired remote control with buttons for rotation direction, variable speed control, and travel of the turning device. Power supply: Three-phase 380V Nedpfx Abolffdyorowh Supplied with manual and CE documentation.

Stanje: novo, Leto izdelave: 2024, Protec KT 10000 varilna obračalna miza Komplet s ročnim daljinskim upravljalnikom Nosilnost 10.000 kg Premer vpenjalne plošče 2000 mm Višina pri nagibu do sredine 1600 mm Višina v vodoravnem položaju 1920 mm Nwsdpfxjid Szve Abrjh Hitrost neprekinjeno nastavljiva od 0,01 do pribl. 0,35 obr/min (možne tudi višje hitrosti) Nagib do 120° Dolžina 2800 mm Širina 1920 mm Nožno upravljanje za doplačilo 390 €

Stanje: rabljeno, Leto izdelave: 2017, Grinding length 1500 mm Centre height 180 mm Machine weight approx. 3.9 t Nwodpowm Rqgsfx Abrjh Space requirement approx. L: 4900 x 1650 x 1800 mm

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece spindle head. Photo shows a previously delivered machine in standard configuration. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control system, eliminating the need for retraining. - Diagnostic function with display of PLC notifications and the digital I/O - Dressing function can be expanded or modified according to customer requirements. - Optionally, workpiece spindle can be stopped in a defined orientation. - New maximum infeed of 40 mm, expandable upon request. - Digital readout in 2 axes. Resolution in X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece spindle head - Encoder with digital display in the grinding spindle head (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increase in centre height to a maximum of 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available upon request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic longitudinal table movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or combined external, face, and internal grinding in a single setup for individual parts. Available options: Nodpfx Aeuwv Idebrowh - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control Please note: The machine tool currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. The required minimum safety level must be determined by means of a risk assessment according to BetrSichV.