Elektromotor 3/3,6 kW 950/1140 vrt/min

ADDA AE132S-5

Leto izdelave: 2022, Stanje: novo, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, tiltable, Extension table, Mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Tilting range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Maximum cutting height: 87 mm, Maximum saw blade diameter: 315 mm, Mitre fence tilting range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction port diameter: each 1 x 100 / 50 mm, Weight: 450 kg Large extraction hood Gjdpfx Afjihahmjqett Location: Available from stock 54634 Bitburg - immediately available - Location: Available from stock 54634 Bitburg - free loaded - - immediately available -

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Gtjdevuuaiepfx Afqjt Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: novo, Panel Saw ALTENDORF WA 6 Gtsdpfx Afju R Sx Eeqst - Exhibition Machine - manual height adjustment, double roller carriage, scoring unit, tiltable, outrigger table, angle-mitre fence, automatic brake, can be lowered below table height ----- Technical Specifications ----- tilt range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade diameter: 315 mm, mitre fence tilt range: up to 49°, speeds: 4,200 rpm, main motor power: 5.5 HP / 4.0 kW, scoring motor power: 0.5 HP / 0.37 kW, table height: 910 mm, dust extraction port Ø: 1 x 100 / 50 mm each, weight: 450 kg - new exhibition machine -

Leto izdelave: 1964, Stanje: rabljeno, številka stroja/vozila: 38792, Milling machine, universal milling machine, tool milling machine, drilling and milling machine - Clamping table: 705 x 310 mm - Clamping table: rotatable/tiltable/swiveling - Travel X/Y/Z: 550/340/420 mm - Spindle taper: SK40 - Speeds: from 46 to 2110 rpm - Feed: 12 to 254 mm/min - Quill stroke: 80 mm - Rapid traverse: mm/min - Coolant system: Gtodpfx Afefgrpnoqst - Dimensions: 1620/1700/H1810 mm - Weight: 1768 kg

Stanje: novo, The machine is supplied without a base. The BF3 Deluxe base is available separately under item number 56-1017. Technical data: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill cutter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT4 Gtsdpev N Uyrsfx Afqet Quill travel: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head swivels: -60° to +60° Spindle to table distance: 95 - 485 mm Milling head vertical adjustment: 390 mm T-slot size: 14 mm Power feed motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Weight approx.: 322 kg Scope of delivery: - 3-axis digital display ES-12 V with LCD display - Quick-action drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT4 / B 16 - Drawbar M 16 - Reducing sleeve MT4 / 3 - Combination shell end mill arbor MT4 / 27 mm - Height-adjustable safety guard - Automatic quill feed - Power feed motor for milling head - LED machine lamp - Digital quill travel display - Thread cutting device - Laminated protective cover - Longitudinal measuring scale - Operating tools Base not included

Stanje: rabljeno, Single Column Eccentric Press WEINGARTEN Type ERV 40 Machine No. 537 / 65 Year of manufacture: 1965 Pressing force: 40 tons Throat depth: 230 mm Table size: 570 x 470 mm Ram area: 250 x 200 mm Clamping pin bore: Ø 40 mm Max. installation height: approx. 520 mm Stroke adjustment: 8 – 88 mm Ram adjustment travel: 63 mm Number of strokes: 70 strokes per minute Drive power: 3 kW Mains connection: 380 Volt, 50 Hz - Table height adjustment - Overload protection via shear plate - Clutch-brake combination using WEINGARTEN friction screw clutch - Electric two-hand control and foot switch - Central lubrication via hand pump Space requirement (L x W x H): 1600 x 1150 x 2300 mm Gedpfx Asffm Hhsfqjtt Weight: approx. 2.6 tons

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, For sale is a DMC 65V linear machining center with gantry design. Special attention should be given to the high-speed spindle with 18,000 rpm. The machine is in good condition and fully functional. Technical data: - Year of commissioning: 2001 - Control: Heidenhain TNC 430 i - Table size: 850x600 mm - Tool holder: SK 40 - Tool changer: 30 positions - Travel X/Y/Z: 650x500x500 mm - Max. spindle speed: 18,000 rpm - Max. feed rate: 60 m/min - Dimensions (LxWxH): 2650x2700x2500 mm - Weight: 10,500 kg On request and at extra cost, disassembly, loading, and transport can be organized for you throughout Europe. Gtsdpfx Ajt I Tplefqjt Prices are subject to VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or ways to contact us, please visit our website.

Stanje: novo, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 t Piston stroke: 185 mm Table width: 170 mm Gtedpfxjd Du T Re Afqot Clearance (E): 510 mm Clearance (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Lateral cylinder travel (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Features • Supplied as standard with left and right traversable pressure cylinder • Suitable for aligning, pressing, bending, assembling gears, discs, etc. • Standard equipment includes foot pedal and hydraulic hand pump for piston feed • Supplied with V-block for aligning shafts • Automatic piston return via integrated return spring as standard • Height-adjustable press table with locking pin • Large, easy-to-read pressure gauge • Includes two-stage hydraulic pump • Robust design thanks to welded steel frame

Leto izdelave: 2003, Stanje: rabljeno, 4-axis machining center with 8-position automatic tool changer for aluminum or PVC profiles Maximum machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm A-axis swivel angle: 0° - 180° max. Spindle speed: 21,000 rpm Windows operating system Minimum quantity lubrication system Clamp detection and automatic repositioning Gtsdpfx Asuwq S Djfqst Chip conveyor integrated in the bed Chip extraction system Pendulum operation via two light barrier zones Loading included in the price Weight: approx. 4,500 kg

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3.2kW), laser type: Trumpf Trumatic TC L 3020, max. sheet thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10,500kg, laser hours: 56,738h, beam hours: 26,243h. Includes Riedel cooling circuit filter unit and pallet changer. The machine door has an acknowledgement error which can be easily resolved by pressing the acknowledgement and cancel buttons. Documentation available. On-site inspection possible. Gedpfov Daf Nox Afqstt