Industrijski robot

ABB IRB6400RM2000

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, skupna masa: 350 kg, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Ponujamo ta nepreverjen industrijski robot ABB IRB6400RM2000, letnik 2002. Tip: IRB6400RM2000 Različica robota: IRB6400R/2.5-120 Napetost: 3×400 V Frekvenca: 50-60 Hz Moč: 8,3 kVA Številka naročila: 198354 Referenčna številka: RP200370001 Serijska številka: 64-23056 Datum izdelave: 2002-02-15 Neto teža: 350 kg Prekinilna zmogljivost: 3 kA Vključuje: robot, krmilna omara, ročna upravljalna enota in povezovalni kabel. Nsdpjzf Hxzefx Aqqjwh Robot ni bil preizkušen, prodaja se kot nosilec rezervnih delov, brez garancije. Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali pokličite.

Stanje: novo, Leto izdelave: 2025, višina struženja: 2.000 mm, teža obdelovanca (maks.): 12.000 kg, premer čelne plošče: 2.000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Max. swing diameter: Ø 3,000 mm Max. turning height: 2,000 mm Table speed: Max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-axis (ram vertical traverse): 1,200 mm Main spindle speed: Max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm, 250 x 4 steps (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting speed: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min) Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holder: New 240 TCR-01 (2 units) Nedpsxqb D Nsfx Aqqewh Splash guard: Table version (R-Type, standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinged type 4-jaw independent manual chuck Foundation anchor bolts / leveling plates Maintenance tools and toolbox Hydraulic unit Work area lighting Signal light: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc instructions and 2 books with mechanical/electrical manuals Power supply: 220 V, 60 Hz, 3-phase Machine color: Manufacturer's standard OPTIONAL ACCESSORIES (#1): Automatic tool changer ATC 24 positions – on request Automatic power-off for N.C. – on request Turning tool holder Type 240TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3-phase – on request Linear scales X-, Z-axis – on request Rigid tapping – on request Automatic tool changer ATC 24 positions – on request Miscellaneous: INSTALLATION, COMMISSIONING, TRIAL OPERATION, AND TRAINING – not included in the price INSURANCE AND FREIGHT – not included in the price Subject to technical modifications/errors. The scope of equipment/accessories is determined solely by the textual item description. Any additional equipment shown – e.g., for illustration purposes – is expressly not included. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, VTL BERTHIEZ (Francija) TM 500 SP Model: TM500 8P Njdpfx Aqex Dbydsqowh Leto izdelave: 1979 Premer vpenjalne glave: 6300 mm Maks. struženje: 15000 mm Maksimalna višina obdelovanca: 4000 mm Pomik roke: 3600 mm Moč glavnega motorja: 100 kW Največja masa obdelovanca: 80 t Prerez bočnega nosilca orodja: 360x360 mm Pomik bočnega nosilca orodja: 2500 mm Teža stroja cca 230 ton Na voljo je video Na voljo so glave za rezkanje in zobčenje

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 9.363 h, Rabljen, 9.363 delovnih ur, letnik 2021. Kot novo. Nwsdpfxeyli Exs Aqqjh

Stanje: rabljeno, Nosilnost: 0/7 kg Doseg roke: 1.800 mm Število osi: 6 Ponovljivost: 0,03 mm Nedpfx Aoh Au I Isqqowh Teža robota: 380 kg Način montaže: talna

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, ABB 2600-12/1.85 Tip B Robot z mnogo opcijami RAZVOJ GSG ROBOTICS Nedpfx Aqexq Ttioqowh GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl, kjer ima veliko servisno območje za vzdrževanje in popravilo robotov. Skozi leta smo se razvili v celovitega partnerja za vsa vprašanja v zvezi z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov: ABB in Fanuc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, nosilnost: 1 kg, Cell ABB IRB 340 M2004 Type B Robot – 34-51225 Country of manufacture: Sweden Year of manufacture: 2008 Controller: ABB M2004 Number of axes: 4 Njdpfxjqffhhj Aqqjwh Payload: 1 kg Robot weight: 140 kg Working envelope: Diameter – 1130 mm Height – 250 mm Rotation – unlimited Cell dimensions: Length – 150 cm Width – 145 cm Height – 240 cm The cell is equipped with two belt conveyors, each with a length of 65 cm and a width of 100 cm.

Stanje: rabljeno, Leto izdelave: 2021, Maximum turning diameter: 2,800 mm Spindle flange diameter: 1,100 mm Maximum swing diameter: 3,000 mm Control: 840 D sl Siemens Speed range – main spindle: max. 230 rpm Main spindle drive power: 206 kW Max. torque: 53,000 Nm Tool holder: Capto C8, swiveling B axis: 0 – 270° Speed range – driven tool positions: max. 6,000 rpm Max. torque: 120 Nm Nsdpfx Aeyrhlwoqqswh Tool holder: Capto C8 Number of tool positions: 41 Max. tool weight: 20 kg Max. tool length: 400 mm Tool diameter at full capacity: 150 mm Tool holder: Capto C8 Number of tool positions: 25 Tool diameter at full capacity: 150 mm Max. tool weight: 20 kg Max. tool length: 400 mm Tool holder: Capto C8 X-axis 1: 2,700 mm X-axis 2: 2,700 mm Z-axis (2 x 1,000) mm Rapid traverse X: 40 m/min / Z: 24 m/min Feed force X/Z: 22 kN Total power requirement: 200 kVA Machine weight: approx. 120 t Space requirements: approx. 10.4 x 6.3 x 5.7 m CNC Vertical Lathe PITTLER - PV 2500 - Control software upgrade SINUMERIK 828D/840D SL ProgramSYNC software option - 12-jaw compensating chuck RÖHM - Retractable step grates - Coolant circulation - Coolant climate control - Oil hose skimmer - SIEMENS Safety Integrated - Network interface / data transmission DNC option - Variable speed range to avoid vibrations - Air cleaner, electrostatic separation - Measuring probe for in-process workpiece measurement - Walk-in work area

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, višina struženja: 2.500 mm, premer struženja: 5.000 mm, obremenitev mize: 127.000 kg, premer mize: 4.500 mm, Karuselni stružnica KOLOMNA 1550 Na prodaj je karuselni stružnica KOLOMNA 1550 za obdelavo velikih in težkih obdelovancev. Stroj je znan po svoji robustni zasnovi in je idealen za uporabo v težki industriji, energetskem sektorju ter pri izdelavi velikih komponent. Stroj si je možno ogledati po predhodnem dogovoru. Tehnični podatki: Premer mize: 4.500 mm Maks. stružni premer: 5.000 mm Maks. višina struženja: 2.500 mm Maks. obremenitev mize: 127 t Teža stroja: 140 t Nwodpoywvciofx Aqqeh Dodatne informacije: Organiziramo prevoz Na voljo so tehnična podpora in svetovanje

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, višina struženja: 1.600 mm, premer struženja: 2.000 mm, CNC Vertical Turning Center Model: VTC-16/20R with Fanuc 31i-B Table diameter: Ø1,600 mm Max. swing diameter: Ø 2,000 mm Max. turning height: 1,600 mm Table speed: max. 250 rpm Table load capacity: 8,000 kg Table indexing speed: 720 degrees/min Nedpexp Nb Tjfx Aqqswh Table indexing: 0.001° X-axis (ram horizontal): -100 mm to 1,170 mm Z-axis (ram vertical): 900 mm Spindle speed: max. 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 250 mm x 3 steps (hydraulic) Table drive motor: AC 37/45 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 15/18.5 kW (continuous / 30 min.) CNC Control: Fanuc 31i-B Display unit: 15-inch TFT LCD Memory: 1 MB Automatic tool changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools) Standard tool holders: New 240 TCR-01 (2 units) Splash guard: Table version (R-Type standard) External coolant system: 3 bar (80 l/min) Chip conveyor: Hinge type Table bearing cooling unit 4-jaw independent manual chuck Foundation anchor bolts / leveling pads Maintenance tools and toolbox Hydraulic unit Work area lighting Signal light: 3 colors (green, red, yellow) Operating manuals (English): 1 CD with Fanuc documentation and 3 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: Manufacturer's standard OPTIONAL ACCESSORIES (No. 1) Turning tool holder: Type 240TCR, 4x included Rigid tapping: 1x included OPTIONAL ACCESSORIES (#2) Automatic shut-off for N.C – on request Turning tool holder type 240TCR – on request Through-spindle coolant supply: 30 bar (pump pressure) – on request Transformer 415 V, 50 Hz, 3 phase – on request Linear scales X-, Z-axis (Fagor, Spain) – on request Workpiece measuring device – on request Tool measurement TS27R, Renishaw – on request Other information: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING – are not included in the price INSURANCE AND FREIGHT – are not included in the price The image shows machine with pallet changer. The offered machine does NOT have a pallet changer! Errors in technical data excepted. The scope of accessories applies exclusively and as specified in the textual item description. There is expressly no entitlement to any additionally depicted accessories that are shown for demonstration purposes, etc. The General Terms and Conditions of JS-Werkzeugmaschinen GmbH apply.