2x industrijski robot

ABB IRB 4600-20/2.50 a IRB 4600-40/2.55

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 26.920 h, IRB 6640-235/2.55 Year of manufacture: 2011 We are also happy to offer this robot fully refurbished! Gbedpfx Asim Si Ajfqog For further information, please do not hesitate to contact us!

Leto izdelave: 1990, Stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2.75-0.85 H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Gbedpjhcnxrofx Afqog Tischmaße (X-Y/mm): 3000×1800 Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls verfügbar

Stanje: pripravljen za uporabo (rabljen), Lastnost Specifikacija Velikost rotorja φ ≈ 370 mm × 1500 mm Hitrost rotorja 80–125 obr/min Gsdpfxow A I Tdo Afqebg Število nožev Do 123 (V-rotor) Moč 75–90 kW (elektromehanika); do 110 kW Vhodna odprtina 1500 × 1890 mm Teža ~6400 kg Velikost izhodnih delcev 15–100 mm (menljivo sito) Pogon in ležaji WAP menjalnik, zatesnjeni ležaji Krmiljenje Siemens PLC Izpust Na voljo trak / polž / sesanje Uporaba Plastika, embalaža, les, vlakna itd.

Stanje: rabljeno, številka stroja/vozila: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Rotor knives: 82 Stator knives: 1 row Gedpfx Afowmg Sgeqjbg Drive motor: 90 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new condition * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional fieldbus interface and IIO3 card available Godpfxoqfguae Afqsbg * 2 units available

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, največja višina reza: 250 mm, delovna višina: 850 mm, moč: 7,5 kW (10,20 KM), We are selling 1 x JRIMAC under-table crosscut saw UKS 1,000 Crosscut capacities: 60x940mm – 140x820mm – 180x720mm – 220x520mm – 240x340mm Maximum cutting height: 260mm Saw blade: 700mm Working height: 850mm Extraction ports (top and bottom): 160mm - Infinitely adjustable, pneumatic feed rate - Hydraulic brake cylinder for uniform stroke speed - Pneumatically controlled workpiece clamping device - Cutting operation triggered via two-hand control with safety guard Gbodsrfudropfx Afqjg - Roller conveyors and stop systems available on request

Stanje: rabljeno, Leto izdelave: 2004, Presskraft: 630 t Hub: 800 mm Ständerweite: 2.600 mm Abstand Tisch/Stößel (bei oberem, verstelltem Hubanschlag): 1.500 mm Tischfläche: 2.500 x 1.300 mm Ziehkissendruck (im Tisch): 300 t Ziehkissenhub (im Tisch): 300 mm Stößelfläche: 2.500 x 1.300 mm Seitlicher Ständerdurchgang: 1.040 mm Abwärtsgeschwindigkeit: ab 600 mm/sec Gjdpfx Afov Svaroqobg Aufwärtshub-Geschwindigkeit: 360 mm/sec Arbeitsgeschwindigkeit: 14 – 42 mm/sec Antriebsleistung: 145,0 kW Maschinengewicht: 85,0 t Platzbedarf (BxTxH): 4,2 x 4,0 x 7,8 m Bauhöhe über Flur: 6,80 m Bauhöhe unter Flur: 1,0 m Vorführmaschine aus einer technischen Hochschule mit ca. 920 Betriebsstunden – neuwertiger Zustand! Für Handbeschickung gemäß CE-Norm zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, oberer und unterer Hubbegrenzung, Lichtschranke (Sick) vorder- und rückseitig, hydraulischem Ziehkissen im Tisch inkl. Auswerferfunktion, hydraulischer Schnittschlagdämpfung, mechanischem Tiefenanschlag über 4 motorisch verstellbare Spindeln, hydraulischer Stößelverriegelung, Zweihandbedienung, 2 Werkzeugwechselkonsolen, 4 hydraulische Kugelrollenleisten im Tisch, 4 Schwingelemente. English translation: Press force: 630 t Stroke: 800 mm Upright clearance: 2,600 mm Distance table/ram, max. stroke up (adjusted): 1,500 mm Table size: 2,500 x 1,300 mm Cushion force in table: 300 t Cushion stroke in table: 300 mm Ram area: 2,500 x 1,300 mm Side frame pass opening: 1,040 mm Downward speed: from 600 mm/sec Upward speed: 360 mm/sec Working speed: 14 – 42 mm/sec Drive motor power: 145.0 kW Machine weight: 85.0 t Space requirements (W x D x H): 4.2 x 4.0 x 7.8 m Overall height above floor: 6.80 m Foundation pit depth below floor: 1.0 m Demonstration machine from a technical university with approx. 920 operating hours – as new condition! Approved for manual loading/unloading according to CE standards. Equipped with electro-hydraulic drive, pressure/time/position-dependent controls, upper and lower stroke limit, light barriers (Sick) front and rear, hydraulic die cushion in table incl. ejector function, hydraulic cutting shock absorber, mechanical depth stop via 4 motorised spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulic ball roller strips in the table, 4 vibration-damping elements.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This degreasing system operates under vacuum (pressure swing process) using modified alcohol or hydrocarbon. (New system) 12 months warranty Immediately available from St. Gallen Featuring vacuum pressure swing process Plant process: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Gsdoqy H H Dopfx Afqjbg Technical Data: - Ultrasonic: 2 × 1000 W – 25 kHz - Double fine filter - Chamber door made of armored glass - 2-tank system, filling volume 400L - Dual distillation, residual distillation - Automatic oil discharge - 3-stage water separation - Electropolished chamber for fine cleaning - Screw vacuum pump (latest generation) - Loading trolley - 2 washing baskets, mesh width 7mm and 12mm - 12" touch panel - Prepared for automatic loading Maximum basket size (480 x 320 x 200 h mm) Maximum loading weight 100 kg Plant dimensions 2400 x 2400 x 3300 h mm Plant weight (basic configuration) 2500 kg Color scheme RAL 9003 (white) RAL 7021 (black)

Stanje: novo, Leto izdelave: 2025, The Multiblade or Single-shaft Multiblade Circular Saw SQUALO 515 in the LM version features an advanced system of movable blades. The machine is equipped with powered feed rollers on the worktable and powered top pressure rollers, ensuring effective all-wheel drive traction for precise and continuous transport of wood materials. Gbodohpbxispfx Afqog In the LM (Movable Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three movable blades. These can be dynamically positioned to accommodate various edging and multiple cutting requirements. A distinguishing feature of this model is its expandable cutting capacity: by utilizing special arbors, the number of blades used simultaneously can be increased to up to six. It is important to note that blades mounted on these special arbors operate at a predetermined fixed distance, enabling the efficient production of components with standardized widths. This versatility allows the machine to easily switch from tasks requiring flexible blade positioning to series production with fixed cutting intervals.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Godpfogwbbqox Afqebg No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)