ABB robotika

ABB ABB IRC5 Controller Drive 09 NEW

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: • Hopper. • Support frame. • Heating chamber. Dsdpevhb S Sofx Apljut • Connection lines. • Air control valves.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: nepreverjeno, številka stroja/vozila: 10021711, skupna masa: 1.400 kg, nosilnost: 210 kg, proizvajalec krmilnikov: KUKA, model krmilnika: KRC 4, 1. Robotic Arm • Manufacturer: KUKA Deutschland GmbH • Model: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Article Number: 10021711 • Serial Number: 1239324 Dujdpfxjv Tyw Ds Aplet • Year of Manufacture: 04/2019 • Net Weight: 1,154 kg • Payload: 210 kg • Reach: 3,096 mm • Country of Origin: Germany 2. Robot Controller • Model: VKR C4 • Article Number: 1106074 • Serial Number: 3007941 • Year of Manufacture: 10/2019 • Weight: 168 kg • Supply Voltage: 3x400V • Mains Frequency: 50/60 Hz • Full Load Current: 22 A • Mains Fuse: 25 A • Country of Origin: Hungary 3. Extraction Unit • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Model: Kleinentstauber OM-8 • Serial Number: 19002523 • Year of Manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current Draw: 1.4 A • Noise Level: 10A [dBA] • Max. Airflow: 600 m³/h • Weight: 60 kg • Protection Class: IP44 • Max. Negative Pressure: 1,600 Pa • Country of Origin: Germany 4. Equipment & Features • Teach pendant with connection cable (visible in control cabinet) • External electrical/control cabinet installation with Ethernet and safety connections (KUKA standard) • Additional attachment mounted on robot flange for special applications (e.g. grinding or deburring) • Pedestal for stationary floor mounting • Control and power cables already terminated and integrated • System stored on pallets and ready for transport

Stanje: zelo dobro (rabljeno), KUKA Model: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Data: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Axes: 6 Mounting Options: Floor, ceiling, wall, or inclined installation possible Controller: KUKA KR C4 (Standard) Typical Applications: - Handling & assembly Dedpfx Aswb Ef Uopleut - Arc welding - Machine tending - Packaging & palletizing - Pick-and-place tasks Special Features: - Flexible use in many industrial areas - High precision and reliability - Compact design with large reach Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, številka stroja/vozila: PM_1000, Used polishing machine for manual operation. Duedefiuguopfx Aplot Drive power: 5.5 kW Polishing wheel diameter: 1000 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, For sale is a welding robot system with the following components: - Elite Robot CS620 (1750 mm reach) with programming flange and software - Fronius TPSi 500 Dujdsv Dvlljpfx Aplet - rotateZERO 500 positioner with 1800 mm x 800 mm sub-frame - Machine frame The unit is immediately ready to weld.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, skupna dolžina: 3.000 mm, skupna višina: 2.000 mm, trajanje garancije: 12 meseci, I am offering a robotic 3D printer equipped with a CEAD extruder and Siemens Sinumerik One CNC control – a solution for large-format printing of molds, design elements, boats, laminating tools, and much more. The machine is manufactured in the Czech Republic and comes with on-site integration and training for the customer. Key features: - Printing system: CEAD E25 extruder (up to 12 kg/h) or S25 (up to 24 kg/h) – selectable according to customer requirements Djdpfxewgkqtj Aplout - Robot arm: COMAU N-170 with 3 meters reach and 160 kg payload capacity - Control system: Siemens SINUMERIK ONE – full CNC control, technology optimization via override possible. Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: Brand new Optional accessories: Heated print bed for optimal adhesion and print quality Note: Software and print bed are not included in the standard scope of supply, but are available as optional accessories. The stated price includes the basic CEAD E25 extruder.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 87.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 775 kg, skupna dolžina: 1.770 mm, skupna širina: 900 mm, skupna višina: 1.530 mm, vrsta goriva: električni, volumenski pretok: 190 m³/h, obratovalni tlak: 8 letvica, tlak (maks.): 10 letvica, raven hrupa: 68 dB, vrsta hlajenja: zrak, Oprema: hladilni sušilnik, Manufacturer: Kaeser ASD 32T Screw Compressor + Refrigeration Dryer Regularly serviced!!! Complete documentation Dujdji E H Ikopfx Aplot Year of manufacture: 2008 Nominal pressure: 8 bar Air flow rate: 3.16 m³/min Air output: 189.6 m³/hour Operating hours: 87,000 Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400 V / 3 Ph, 36 A Power: 18.5 kW Motor speed: 2,945 rpm Ambient temperature: 3 / 45°C Machine weight: 745 kg Machine dimensions: 1,770 x 900 x 1,530 mm

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: Dusdswbknbjpfx Aplot ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: novo, Leto izdelave: 2026, The ATC plotter series has been designed for professional applications in large industrial plants and factories, used for the production of complex, large-format components. Owing to its special construction, the machine is suited for manufacturing foundry models and yachts, significantly reducing processing times. To meet the demands of heavy-duty machining, ATC machines are equipped with a reinforced frame and more powerful AC servo drives on each axis. The presence of five axes supports the machining of even the most demanding components. Standard equipment for this series includes automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials processed: - wood - wood-based materials (chipboard, MDF, OSB, etc.) - plastics Duodpoiq U Tqefx Apljt - composites - PVC - non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The machine’s frame is made of steel and cast iron, ensuring high rigidity and resistance to heavy loads associated with machining processes. WORKING AREA: The working area of our machine is 3000 x 6000 [mm]. Z AXIS RANGE AND GANTRY CLEARANCE: Parameters tailored to the client’s individual requirements. DRIVES: The machines are powered by SERVO motors, providing appropriate acceleration and speed in all directions. The X and Y axes feature classic, proven helical racks for durability and precision, while the Z axis is driven by a high-grade ball screw. All axes move along linear guide rails. SPINDLE: A powerful, brushless high-end spindle drives the cutting tool. The spindle speed ranges from 6,000 to 24,000 rpm. It is powered by a frequency inverter of higher power than the spindle itself, which prevents speed drops under heavy load. TOOL MAGAZINE: As standard, the machine is fitted with a linear tool magazine with 6 HSK holders. Additional tool magazine positions are available on request. SOFTWARE: The machine comes with dedicated CAD/CAM software, enabling fast and easy design of components, which the software then converts into G-code. Importing ready-made files from other programs is also possible. CONTROL SYSTEM: The machine is operated via a controller equipped with its own processor and RAM, ensuring stable and reliable operation.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: MA0139_1335, Exhibition unit available immediately: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and air receiver tank Sigma Control 2 controller Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Dsdpfxshwwyre Aplsut Air receiver tank volume: 350 litres Refrigeration dryer pressure dew point: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Attractive lease financing for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!