Stroj za površinsko brušenje

aba Abawerk FFK 504

Stanje: novo, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Tapping capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Hsdpfsb Eldnox Af Tong Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor, frequency-controlled: 1.1 kW With full-featured tapping device and programmable digital display Machine in stock and immediately available

Leto izdelave: 2006, obratovalne ure: 15.000 h, Stanje: dober (rabljeno), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250–350 kg/h Hjdoumubyepfx Af Tsng The plant is currently processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February.

Leto izdelave: 1960, Stanje: rabljeno, Surface grinding machine with 250 x 135 mm magnetic chuck 400 Volt, power: 1.8 kW Hedpfoiuz Tgex Af Tjng

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Hnodpfx Ajurw Uyef Teg Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Hnjdpfjt Hwziex Af Tjg Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Grinding length 1000 mm Hnedpek Abxxsfx Af Tsg Grinding diameter ø 350 mm In very good condition.

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t Hnodpscxxtmjfx Af Tog with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Hodpfxew Dvkaj Af Tjng Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Hsdpfx Aeiyyf Isf Teng Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: rabljeno, max. grinding length: 300 mm gmax. grinding width: 150 mm table movement - longitudinal feed: 2 - 20 m/min grinding wheel speed: 3000 rpm electric connection: 380 V, 1.1 kW Hedpfx Afer Nyatj Tong required space: 1500 x 1100 x 1750 mm weight: 920 kg