Sklarz Abwasser- und Umwelttechnik GmbH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1803007, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.000 obr/min, skupna masa: 1.500 kg, Brez izklicne cene – zagotovljena prodaja najboljšemu ponudniku! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Pomik X-osi: 400 mm Pomik Y-osi: 400 mm Pomik Z-osi: 400 mm Število vrtljajev vretena: 40 – 2.000 min⁻¹ Vpenjalni sistem orodja: SK 40 Dimenzije mize: 800 x 400 mm Število utorov v mizi: 8 Klodsym A Ngopfx Adksp PODROBNOSTI O STROJU Obratovalna napetost: 400 V Frekvenca: 50 Hz Nazivni tok: 16 A Priključna moč: 3 kW Dimenzije & Teža Dimenzije (D x Š x V): 2,100 x 1,300 x 200 mm Teža: 1,500 kg OPREMA Trosmerni digitalni prikazovalnik (SINO) Zunanja referenca: Light Mobility

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, X = 400 mm, Y = 300 mm Brezstopenjsko nastavljivi pomiki, Stopnjevite hitrosti od 35 do 2200 obr/min Vpenjanje ISO 40 Ksdpfoyl T Spox Adkelp • Glava za rezkanje z vrtalno pinolo • Univerzalna vrtljiva in nagibna miza

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain ND780 Digital Readout, Special Finish in Light Grey! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Drawbar system: M16 >> Weight approx. 1500 kg Klsdpfx Adeylmh Dokjp Accessories and Equipment: >> 3-axis digital readout system Heidenhain ND780 >> Coolant system >> Chip tray >> Centralized lubrication About the machine: Offered here is a Deckel FP4M universal milling machine in very good condition. The machine is partially overhauled, with minimal backlash and all slides/spindles move smoothly and evenly. Even at maximum spindle speed, the milling machine runs quietly. Rapid traverse is available on all axes, with all bellows replaced. The fixed angle table has been newly planed. A reliable and user-friendly machine. An oil change has been carried out. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power on site. For an additional charge, the machine can be supplied in CE-compliant configuration.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2836-0192, Stroj v dobrem rabljenem stanju, Krmiljenje Dialog 11 Do pred kratkim je bil redko v uporabi v lastni delavnici. Dokumentacija/priročniki itd. so na voljo. Kljdpjylawxofx Adkop Dodatna oprema, rezkarji, ničelne sonde itd. se lahko dokupi opcijsko.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1968, Funkcionalnost: nepreverjeno, številka stroja/vozila: 70013, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 1.600 obr/min, hitrost vretena (min.): 32 obr/min, proizvajalec krmilnikov: HEIDENHAIN, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe pomeni obveznost pravočasnega prevzema med 08.04.26 in 16.04.26! TEHNIČNI PODATKI Pomik osi X: 400 mm Pomik osi Y: 300 mm Pomik osi Z: 300 mm Kodoyk Ufnepfx Adkjlp Območje vrtljajev vretena: 32 do 1600 min⁻¹ Dimenzije mize: 590 x 430 mm Širina čeljusti: 160 mm PODROBNOSTI O STROJU Proizvajalec krmiljenja: HEIDENHAIN Dimenzije in teža Dimenzije (D x Š x V): 2500 x 2000 x 1800 mm Teža stroja: 1500 kg OPREMA Trioosni digitalni prikazovalnik Delavniška omara s pripadajočo opremo

Stanje: zelo dobro (rabljeno), Deckel FP2 rezkalni stroj Vrsta stroja: univerzalni konvencionalni orodjarski rezkalni stroj Proizvajalec: Deckel Tip: FP2 Kledpsyk S R Ujfx Adkjp Leto izdelave: neznano Način upravljanja: konvencionalno Izvor: Nemčija Lokacija zaloge: Albstadt Dobavni rok: po dogovoru

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP2 FPS posodobljena orodjarska rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju, prihaja iz izobraževalnega oddelka. Fiksna miza, dolg pomični rezkalni agregat, SK 40 vpenjalni vretenasti nastavki. Dodatki: različne vpenjalne puše in držala rezk. Dobra, delujoča kondicija. Po dogovoru je možen prikaz v obratovanju. Kljdeyhbn Ropfx Adkop

Stanje: zelo dobro (rabljeno), Rezkalni stroj DECKEL FP 2 iz izobraževalne ustanove -Dobro vzdrževano originalno stanje -Pomiki X/Y/Z 400x200x400 mm -3-osni digitalni prikazovalnik "NOVO" -Kotni stroj – vpenjalna površina mize 700x350 mm -Območje vrtljajev 40–2000 obr/min -Avtomatski pomiki / hitri pomiki po vseh treh oseh -Orodni vpenjalni sistem ISO 40 -Vertikalna / horizontalna frezalna enota -Nagibna vertikalna glava z vrtalno tulejo -Hladilna naprava -Matica vretena osi X "NOVO" -Noge stroja Kljdpfx Adjx Hyuhjkop -Strojni primež "RÖHM" -Razni nosilci za orodje -Pločevina za ostružke – podstavek stroja -Dokumentacija Dimenzije: D x Š x V 1,5 x 1,7 x 1,8 metra / Teža: 1500 kg Pridržujemo si pravico do napak in sprememb.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, Dear Sir or Madam, Kodpfxox Hr Dze Adkolp We are offering for sale a Deckel FP2. This newer model stands out especially for its infinitely variable spindle speed control, while still featuring a very straightforward design. Operation is extremely simple as well. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to verify on site. --- Currently, we have 3 units available --- Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool mounting: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed control on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced prior to sale - On request, we can fully or partially overhaul your selected machine - On request, you can order additional accessories such as tools, etc. directly - On request, we can fit additional equipment such as safety features directly - We are also happy to take care of shipping and/or installation

Stanje: rabljeno, Univerzalna orodjarska rezkalna stroj WEMAS - MAKOSON tip WM 2 Leto izdelave 1992 Pomiki X: 480 mm, Y: 350 mm, Z: 250 mm Velikost mize 800 x 400 mm Vretensko ISO 40 Kledpjx Hkd Tefx Adkjp Vertikalni pomik pinole 80 mm Obrati vretena 35 do 4000 min⁻¹, 3 stopnje Pomiki X, Y in Z 1 do 850 mm/min, brezstopenjsko Hitri pomik X, Y in Z 1 m/min Pogon vretena približno 3 kW ?? Priključek 400 V, 50 Hz - Zasukljiva upravljalna konzola z HEIDENHAIN digitalnim prikazovalnikom, tip Positip 850 - Hitrost vretena preko 3 prestav in brezstopenjsko preko frekvenčnega pretvornika - Klasična ročna kolesa za X, Y, Z - Navpična rezkalna glava z vrtalno pinolo pomična +/- 90° - Ročno vpenjanje orodja z navojem M16 - Ročno centralno mazanje - Hladilna naprava v podstavku stroja - Krmilna omarica fiksno na stroju - Fiksna kotna miza Tlorisne mere D x Š x V 1900 x 1700 x 1820 mm Teža cca 2000 kg Dobro stanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 580 mm, pomik osi Y: 400 mm, pomik po osi Z: 450 mm, največja hitrost vrtenja: 4.000 obr/min, model krmilnika: Contour 1, NC milling machine Deckel FP4A We are selling a perfectly preserved Deckel FP4A milling machine (very few working hours and in perfect condition like new)! Details x-way 580mm y-way 400mm z-way 450 (390*) mm Table size 460x800mm Spindle speed range 40 - 4000 rpm feed range 2 - 3600 mm/min feed 4.0 m/min Spindle mount SK 40 Space requirement approx. 3.0 x 2.10 x 2.10 m Spindle drive 4.0kW steering Contour 1 Description CNC-controlled tool milling machine with Contour 2 control, vertical head rotatable +/- 90° with quill stroke 80mm, horizontal spindle, feeds & rapid feeds in 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant device, safety emergency stop, chip tray, separate Switch cabinet. The machine is in good condition. this extra information is standard for this model. Please always double-check the details during a visit Klsdpfx Adoxzpwfekjp The DECKEL FP 4 A Universal Tool Milling Machine, originating from 1985, is a classic and versatile metalworking machine celebrated for its precision and adaptability. This model is a testament to Deckel's commitment to quality engineering. The FP 4 A features a sturdy bed-type structure, providing the essential stability for precision milling operations. The universal tool milling head is a standout feature, allowing operators to perform a wide range of tasks, from basic drilling to intricate contouring and profiling. This adaptability makes it invaluable in industries like tool and die manufacturing and mold production. Key technical specifications of the 1985 DECKEL FP 4 A include a spacious worktable, variable spindle speed control, and an intuitive interface for efficient programming and operation. The machine is also known for its advanced control technology, which enhances precision and user-friendliness. Despite its age, the DECKEL FP 4 A remains a trusted choice for industries requiring versatile tool milling capabilities. Its reputation for durability and precision endures, making it an essential tool in modern metalworking and manufacturing facilities, demonstrating Deckel's enduring commitment to quality and innovation in the field of metal machining.

Stanje: dober (rabljeno), Leto izdelave: 1979, Deckel FP2 s brezstopenjsko regulacijo, orodna rezkalna stroja. Stroj je v dobrem stanju, tog namizje, SK 40 vpenjalni vreteno, pribor: razne napenjalne tule in držala rezk. V dobrem, delujočem stanju. Po dogovoru je možen prikaz pod napetostjo. Kledpfx Asxzn Hledksp

Stanje: rabljeno, Pomik X 400 mm Pomik Y 400 mm Pomik Z 300 mm Hitri pomik 1,2 m/min Območje pomika 5 - 500 mm/min Počasni pomik 1:100 Vpenjalo za orodje ISO 40 Hod v60 h70 mm Univerzalna miza ca. 620 x 320 mm Višinsko nastavljiva miza 350 mm Teža stroja ca. 1200 kg Kljdpfxexv D Uzo Adkjp Stroj je bil uporabljen v javni ustanovi in je v dobrem stanju. Stroj si je mogoče ogledati v obratovanju po predhodnem dogovoru.

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Kledpjxu Uvtsfx Adksp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: Kljdpoxghtvefx Adkjp >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: novo, Leto izdelave: 2026, x-travel 420 mm y-travel 220 mm z-travel 380 mm horizontal table 840x390 mm vertical table 950x250 mm spindle speeds 65–2600 rpm Ksdpexfb H Tefx Adkolp spindle taper DIN 2080 ISO 40 - New machine - - horizontal table size 840x390 mm - - vertical table size 950x250 mm - - spindle speed 65–2600 rpm - with 3-axis digital readout FAGOR INNOVA 400i, automatic table feeds, telescopic way covers, 1 horizontal milling arbor, folding table enclosure, and pneumatic tool clamping system DIN 2080 * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: rabljeno, Leto izdelave: 2006, x-pomik 560 mm y-pomik 300 mm z-pomik 420 mm dimenzija mize 1055 x 240 mm pritrditev vretena ISO SK 40 Klsdpfxsxfb Hte Adksp vrtljaji vretena 40 - 1550 vrt/min glavna zahtevana moč 5,5 kW teža stroja pribl. 1,3 t dimenzije D x Š x V 1,6 x 1,5 x 1,85 m Univerzalni rezkalni stroj - Digitalni prikaz - Zaščita pred ostružki - Sistem za hlajenje - Strojna svetilka - Posoda za ostružke

Stanje: rabljeno, x-hod 390 mm y-hod 200 mm z-hod 390 mm Velikost mize 775 x 330 mm Vpenjalno vreteno ISO SK 40 Območje vrtljajev vretena 40 - 2000 min⁻¹ Hod pinole 40 mm Skupna moč 2,2 kW Teža stroja cca 1,4 t Dimenzije D x Š x V 1,75 x 1,5 x 1,8 m Univerzalni rezkalni stroj - Digitalni prikaz - Zaščita proti ostružkom - Hladilni sistem Kledpfx Aoxfb Hgjdkjp - Strojna svetilka - Posoda za ostružke - Noge stroja - Navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP3 orodjarska rezkalna stroj z 3-osnim Heidenhain digitalnim prikazovalnikom, togim mizo, vretenom SK 40, dodatki: različne napenjalne tule in držala rezk, nasprotni nosilec. V dobrem, takoj uporabnem stanju. Po dogovoru možno predstavitev pod napetostjo. Kedexdr Uxopfx Adkolp

Stanje: rabljeno, Leto izdelave: 1986, X-hod 400 mm Y-hod 375 mm Z-hod 250 mm Velikost mize 600 x 300 mm Hod pinole 50 mm Vretena ISO 40 Obrati vretena 50-400, 400-3150 min⁻¹ CNC krmilnik TNC 135 Kedsxc Nwnspfx Adkslp Obratovalna napetost 380 V / 50 Hz Pomiki X+Z = 5 - 1000 mm/min Hitri pomiki X+Z = 2,4 m/min Pomiki Y = 5 - 670 mm/min Hitri pomik Y = 1,6 m/min Ločljivost merilnega sistema 0,005 mm Skupna priključna moč 3,7 kW Teža stroja pribl. 0,9 t Prostorska zahteva pribl. 1,9 x 1,8 x 1,70 m z Heidenhain TNC 135 (sledilno krmiljenje)

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP3, orodna rezkalna naprava s 3-osnim digitalnim prikazovalnikom Heidenhain. Stroj je v dobrem stanju. Fiksna miza, vpenjalni stožec SK 40. Oprema: različne napenjalne puše in nosilci rezkalnikov, nasprotni nosilec. V dobrem, takoj pripravenem obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Ksdpfxjxbx R Ue Adkslp

Stanje: rabljeno, Leto izdelave: 2002, X-hod 400 mm Y-hod 320 mm Z-hod 440 mm Velikost mize 80 x 325 mm Vretenasta glava ISO SK 40 Vrtljaji vretena 63 - 3150 min⁻¹ Hod pinole 60 mm Teža stroja cca. 1,5 t Dimenzije D x Š x V 1,8 x 1,8 x 1,9 m Univerzalni rezkalni stroj - Digitalni prikazovalnik - Hidravlični vpenjalnik orodij - Centralno mazanje Kledew Tdxispfx Adksp - Hladilni sistem - Strojna svetilka - Noge stroja - Protipodpora - Posoda za ostružke

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Digital Readout, Light Grey, Excellent Condition, CE Compliant!!! Technical Data: >> Year of construction: 1992 Machine no. 2203-8489 >> Fixed angular table Kjdpfx Adow Evq Ajkslp >> Speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel (X/Y/Z): 500/400/400 mm >> Vertical milling head traversable on spindle carrier >> Vertical and horizontal quill – SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Electric central lubrication >> Operating manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Aktiv universal milling machine in excellent condition and CE compliant. The machine has minimal backlash and all spindles move smoothly. The milling machine runs quietly even at maximum speeds. This model features hydraulic clamping. On this newer version of the FP4, the feed can be continuously adjusted in all three axes, and each axis is equipped with rapid traverse. A significant advantage is the active 3-axis Heidenhain digital readout, allowing input of dimensions for the machine to move to automatically. Oil has been changed, and the machine has been mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test this machine under power at our location.

Stanje: dober (rabljeno), Universal Milling Machine Stock no.: 3008 Manufacturer: Deckel Machine no.: 46445 Type / Model: FP 2 Travel (x-y-z): 400 - 200 - 400 mm Table size: 700 x 285 mm Speed range: 40 to 2,000 rpm Spindle taper: SK 40 Feeds: 8 to 400 mm/min Power connection: 2.2 kW Accessories/Equipment: Elesta digital readout Ksdpfxjwy Dl Ds Adkslp Condition: good Weight: 1.2 t Dimensions: 1,000 x 1,200 x 1,800 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Emco C40 Linear with Digital Readout and Contour Control – Excellent Condition, CE-Compliant! Technical Data: >> Year of Manufacture: 2008 Machine No.: BA1DW2501 >> Milling Table Clamping Surface: 800 x 400 mm Clamping Slots: 8 Slot Width: 14 H8 Slot Spacing: 50 mm Max. Table Load: 300 kg >> Infinitely Variable Spindle Speeds: 10–5,000 rpm >> Infinitely Variable Feed Rate: 10–2,000 mm/min Rapid Traverse X-axis: 5,000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and Horizontal Quill – SK40 >> Hydraulic Tool Clamping System >> Quill Stroke: 80 mm >> Weight: approx. 2,000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main Drive Motor: 7 kW >> Spindle Brake >> Technical Documentation, Spare Parts Diagrams, Operating Manual >> Swiveling Enclosure >> Coolant System >> Machine Lamp >> Indexing Head with Tailstock >> Steady Rest >> Röhm Machine Vise Kedpfx Adowxxdfekslp About the machine: For sale is a Universal Milling Machine Emco C40 Linear with contour control. This universal milling machine is in almost new condition. It comes from a government facility where it saw very little use. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal axes. Converting from vertical to horizontal milling is straightforward thanks to the pivotable vertical head. The Emco has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power on our premises.