AF-P Gazdasági Tanácsadó és Vagyonkezelő Gmbh.
AF-P Gazdasági Tanácsadó és Vagyonkezelő Gmbh. iz Budapest
Ta trgovec še ni dodal opisa podjetja.
gospod Sándor Lakatos
Pasaréti str. 83
1026 Budapest
Madžarska
Trenutne ponudbe podobnih prodajalcev
Mali oglas
Żukówka
787 km
Balairka
HSMHL 4809i
HSMHL 4809i
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, teža bale: 480 kg, Prodam stiskalnico HSM HL 4809I
Lhodoy T Iqdspfx Adljg
Mali oglas
Żukówka
787 km
Balairka
HSMHL 7009ST
HSMHL 7009ST
Pokliči
Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Prodajam stiskalnico HSM 7009st z tračnim transporterjem.
Lhodpfx Aey T Inpjdljg
Mali oglas
Stuhr
887 km
Balairka
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 423 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021
Technical data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 423
Pressing force: 60 t
Drive power: 4 kW
Feed opening: 1195 x 645 mm
Feed height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Tying: manual
Theoretical cycle time (idle): 25 s
Theoretical press capacity: 12 m³/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Materials: film, paper, cardboard
Note: The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel.
Please note:
Lhedpey T E I Hefx Adlog
All technical data refer to information provided by the manufacturer. We do not assume liability for the given information or any possible errors.
Offers are subject to change, prior sale reserved, and can be withdrawn at any time.
Inspections are possible by arrangement.
The sale is ex location, without warranty or guarantee.
Our payment condition is 100% prepayment.
Mali oglas
Stuhr
887 km
Balairka
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 7 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021
Technical data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 7
Pressing force: 60 t
Drive power: 4 kW
Feed opening: 1195 x 645 mm
Feed height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Strapping: manual
Theoretical idle cycle time: 25 s
Theoretical throughput: 12 cbm/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Materials: Film, paper, cardboard
Note: The press is in good condition. It has been inspected and tested by us. A video is available on our website or our YouTube channel.
Please note:
All technical data is based on information provided by the manufacturer. We assume no liability for the information provided or for any possible errors.
Offers are subject to change without notice; prior sale reserved; offers may be revoked at any time.
Lhjdoy T E Iajpfx Adlog
Viewings can be arranged by appointment.
Sale is ex works, without warranty or guarantee.
Our payment terms: 100% advance payment.
Mali oglas
Żukówka
787 km
Balairka
HSMHL3521S
HSMHL3521S
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.200 mm, teža bale: 500 kg, Oprema: varnostna svetlobna zapora, Prodajam stroj HSM 3521s, letnik 2015-2023.
Lhedpfx Adjy T Empsleg
Mali oglas
Stuhr
887 km
Balairka
PaalKonti 325 G
PaalKonti 325 G
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 12.110 h, Gerade eingetroffen
Ballenpresse Paal Konti 325 G, Baujahr 2013
Technische Daten:
Hersteller Paal
Typ Konti 325 G
Baujahr 2013
Betriebsstunden 12110
Presskraft 100 t
Antriebsleistung 2 x 55 kW
Einfüllöffnung 1020 x 1750 mm
Ballenmaße 750 x 1100 mm, Länge variabel
Abbindung 5-fach automatisch
Durchsatz bei
35 kg/m³ ca. 13,5 t/h
60 kg/m³ ca. 21,5 t/h
100 kg/m³ ca. 33 t/h
Ballengewicht bis 800 kg
Transportabmessung ca. 12216 x 2530 x 2800 mm (LxBxH)
Maschinengewicht ca. 28.000 kg
Lhodpfjy Twt Uox Adlog
Materialien: Papier, Pappe, Leichtmüll, Kunststoffabfälle
Bitte beachten Sie:
Alle technischen Daten beziehen sich auf Angaben des Herstellers. Für die gemachten Angaben sowie eventuelle Irrtümer übernehmen wir keine Haftung.
Das Angebot ist freibleibend, Zwischenverkauf vorbehalten und jederzeit widerrufbar.
Besichtigungen sind nach Absprache möglich.
Der Verkauf gegen Vorkasse erfolgt ab Werk, ohne Gewähr und Garantie.
Mali oglas
Stuhr
887 km
Balairka
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 245 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021
Technical data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 245
Pressing force: 60 t
Drive power: 4 kW
Feed opening: 1195 x 645 mm
Feed height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Tying: manual
Theoretical cycle time (idle): 25 s
Theoretical pressing capacity: 12 cbm/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Lhedpfxey Tvzde Adlog
Materials: Foil, paper, cardboard
Note: The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel.
Please note:
All technical data is based on the manufacturer's information. We accept no liability for the information provided or for possible errors.
Offers are subject to change, prior sale reserved, and may be withdrawn at any time.
Viewings can be arranged by appointment.
The sale is ex location, without warranty or guarantee.
Our terms of payment are 100% advance payment.
Mali oglas
Bergisch Gladbach
787 km
Balairka
BramidanBS W
BramidanBS W
Pokliči
Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodni tok: 10 A, skupna masa: 550 kg, raven hrupa: 67 dB, moč: 1,1 kW (1,50 KM), vhodna frekvenca: 50 Hz, Ponujamo rabljeno stiskalnico za bale Bramidan BS W, letnik 2017.
Serijska številka: PVB384139
Model: BS W
Letnik: 2017
Nazivna napetost: 1 x 230 V
Lsdpey Tvczjfx Adljhg
Frekvenca: 50/60 Hz
Tok: 10 A
Moč: 1,1 kW
Raven hrupa: 67 dB
Teža: 550 kg
Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.
Mali oglas
Nysa
513 km
Horizontalna stiskalnica HSM HL 7009
HSMHL 7009
HSMHL 7009
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, Oprema: dokumentacija / priročnik, Horizontalna balirna stiskalnica HSM HL 7009 Re/Li. Stroj je v zelo dobrem stanju in ga redno vzdržuje pooblaščen servisni center.
Ta balirna stiskalnica je zasnovana za večje projekte odstranjevanja odpadkov v maloprodaji ter v manjših in srednje velikih centralnih skladiščih. Stiski modela HL 7009 imajo prečni prerez 1100 x 1100 mm in lahko pri dolžini baleta 1200 mm tehtajo do 600 kg. To zagotavlja optimalno izkoriščenost nosilnosti tovornjaka.
Pritisna sila: 700 kN
Specifična pritisna sila: 58 N/cm²
Pogonska moč: 10,5 kW
Napetost / frekvenca: 400 V / 50 Hz
Lhedpoy Tt Riofx Adljg
Nazivna prostorninska zmogljivost (teoretično): 42,97 m³/h
Odprtina za polnjenje – širina x dolžina: 890 x 1020 mm
Dimenzije baleta – širina x višina x dolžina: 1100 x 1100 x 1200 mm
Skupne dimenzije – dolžina x širina x višina: 5366 x 2525 x 2559 mm
Teža baleta: 600 kg
Mali oglas
Goor
913 km
Balairka
BOAD130 B 5V 5H 110
BOAD130 B 5V 5H 110
Pokliči
Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V302591-20, stiskalna sila: 130 t, širina odprtine za polnjenje: 1.620 mm, dolžina polnilne odprtine: 972 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, skupna masa: 41.000 kg, pritisk: 280 letvica, kapaciteta rezervoarja za olje: 2.450 l, moč: 150 kW (203,94 KM), BOA Impress D130 B 110 with side tying – used baler, professionally maintained
Are you looking for a powerful, reliable, and immediately available baler? Then this BOA Impress D130 B 110 with side tying is an excellent opportunity.
We have acquired this press as a trade-in machine. The previous owner, a client in England, has worked with this BOA baler for years and has now once again opted for a new BOA installation. That says a lot about the trust in the machine, the brand, and the service behind it.
The press has been maintained throughout its entire operational period by our own BOA service team in England. This maintenance has always been carried out with great care, resulting in a well-documented maintenance history. The machine was dismantled in working condition and is currently in storage with us, where it is also available for inspection.
Prior to delivery, the machine undergoes a technical check-up. Any components that require replacement will be replaced by us, ensuring that the baler is offered in good condition.
Why this BOA D130 B is interesting
The BOA Impress D130 B 110 is a heavy-duty industrial baler with high pressing force, suitable for intensive use and high capacities. Thanks to the side tying and robust construction, this is a strong solution for companies that want to process large volumes of material efficiently.
Technical specifications
Type: BOA Impress D130 B-5V-1.6
Version: D130 B 110 with side tying
Hydraulic power: 110 kW
Main pumps: 2 × 55 kW
Counterpressure pump: 5.5 kW
Filter pump: 5.5 kW
Oil cooler: 4 kW
Operating voltage: 400 V / 50 Hz
Insulation class: IP55
Hydraulic working pressure: 280 bar
Oil tank capacity: 2,450 litres
Press force: 1266 kN / 126 tons
Specific pressing pressure: 10.5 kg/cm²
Press stroke: 2900 mm
Lhjdpfx Adey Tnzcoleg
Channel dimensions: 1100 × 1100 mm
Press chamber volume: 3.51 m³
Bale length: adjustable, approx. 1400 mm
Bale weight: up to approx. 1200 kg, depending on material
Number of tying wires: 5 vertical / 5 horizontal
Filling hopper: 1620 × 972 mm
Machine weight: approx. 45 tons
Noise level: < 85 dB(A)
Average loaded cycle time: 20 seconds
Availability:
The machine is currently stored at our facility and can be viewed by appointment. Since the press comes from our own trade-in stock, was dismantled in operational condition, and maintained by our own service team, we can provide a thorough overview of its technical condition and history.
A robust used BOA baler with a known background, professional service history, and a check-up before delivery.
Mali oglas
Goor
913 km
Balairka
BOAD130 A 110KW
BOAD130 A 110KW
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 130 t, širina odprtine za polnjenje: 1.620 mm, dolžina polnilne odprtine: 972 mm, širina bale: 1.100 mm, višina bale: 720 mm, skupna masa: 43.000 kg, trajanje garancije: 6 meseci, pritisk: 280 letvica, kapaciteta rezervoarja za olje: 2.450 l, moč: 110 kW (149,56 KM), leto zadnje generalne obnove: 2026, This Impress D130-A-110 kW is in like-new condition and has been fully refurbished. The press has been completely rebuilt, with almost all parts replaced by new components. Only the frame and several mechanical parts remain from the original assembly.
The main cylinder has been completely overhauled. In addition, all electrical components and the entire hydraulic system have been replaced with new parts. The control cabinet is also entirely new, ensuring maximum reliability, safety, and operational security.
The standard configuration of this machine features horizontal tying. Thanks to the prepared frame, this press can also be delivered, upon request, with both horizontal and vertical tying, making the machine highly adaptable for processing a wide range of materials.
Lhjdoy Tm H Rspfx Adljg
Applications
Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more.
As you have come to expect from BOA, this used machine can also be delivered with technical support, spare parts supply, and expert advice.
Mali oglas
Oudehorne
993 km
Baler, stiskalnica za papir, stiskalnica za odpadke, odpadki
HSMV-Press 860 plus 2015
HSMV-Press 860 plus 2015
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Znamka: HSM
Tip: V-press 860 plus
Letnik: 2015
Tlačna sila: 418 kN
Napetost: 400 V
Največja teža bala: 480 kg (odvisno od materiala)
Dimenzije bale: 120 x 120 x 78 cm
Teža stroja: 2083 kg
Lhsdsy Tlvdepfx Adlsg
Dimenzije stroja: 180 cm x 125 cm x 298,5 cm
Velikost odprtine za polnjenje: 120 cm x 65 cm
Video delujočega stroja je na voljo na zahtevo.
Mali oglas
Stuhr
887 km
Balairka
PrestoHPK 50 BS
PrestoHPK 50 BS
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Available from June 2026
Baler Presto HPK 50 BS, year of manufacture 2011, with whirlulator and optional Horstmann chain belt conveyor
Manufacturer: Presto
Model: HPK 50 BS
Year of manufacture: 2011
Drive: 30 kW
Pressing force: 50 t
Feed opening: 1600 x 1050 mm (LxW)
Channel cross-section: 700 x 1100 mm
Max. feed volume: 1.23 m³
Cycle time: 19 s
Binding: 4-fold
Throughput at
35 kg/m³: 6 t/h
60 kg/m³: 9.6 t/h
100 kg/m³: 13.9 t/h
Lhjdpfx Aoy Ticzedleg
Bale weight: up to 500 kg
Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH)
Machine weight: approx. 12,000 kg
Chain Belt Conveyor Data
Manufacturer: Horstmann
Model: PK 1100/11
Year of manufacture: 2011
Belt width: 1100 mm
Speed: approx. 0.2 m/s (max. 0.3 m/s)
Feed section: approx. 3000 mm
Inclined section: approx. 5000 mm
Gooseneck: approx. 1000 mm
The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026.
Please note:
All technical data is based on information provided by the manufacturer. We do not assume any liability for the information provided or for possible errors.
This offer is subject to prior sale, is non-binding and can be revoked at any time.
Viewings are possible by appointment.
Sale is ex works, subject to prior payment, and without warranty or guarantee.
Mali oglas
Οινόφυτα
1.125 km
Balairka
StrautmannMK 700
StrautmannMK 700
Pokliči
Stanje: rabljeno, Prodajamo rabljeno balirko za odpadke. Uporablja se lahko za papir, karton in plastično folijo. Balirka je popolnoma funkcionalna. Na voljo je video delovanja.
Lhjdpfx Aey S Tf Djdlsg
Mali oglas
Nizozemska
974 km
Balirni stroj 80 t z 8-kratnim križnim vezanjem
Presona ABLP 80 VHK 1
Presona ABLP 80 VHK 1
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2026, volumenski pretok: 930 m³/h, Technical Data – Baler:
Manufacturer: Presona AB
Model: LP 80 VHK 1
Year of manufacture: 2012
Total machine operating hours: 25,895 hours (as of July 2025)
Pump effective operating hours: 14,135 hours (as of July 2025)
Total number of bales pressed: 235,597 pcs (as of July 2025)
Lsdsy S Ru Aopfx Adljhg
Main press force: 78.5 t
Specific pressing force: 95 N/cm²
Pre-press force: 28 t
Press chamber volume: 2.7 m³
Feed hopper dimensions: 1,500 x 1,100 mm
Theoretical throughput: 930 m³/h
Throughput under operating conditions: 410 m³/h
Bale dimensions: 750 x 1,100 mm
Drive power: 55 kW
Tying system: 5-fold vertical, 3-fold horizontal, fully automatic
Throughput at bulk density of:
- 30 kg/m³: approx. 9 to 12 t/h, depending on material
- 50 kg/m³: approx. 14 to 17 t/h, depending on material
- 100 kg/m³: approx. 16 to 25 t/h, depending on material
Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material
Bale weights: 450 to 600 kg, depending on material and bale length
Hydraulic oil tank volume: 1,000 L
Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H)
Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm
Machine weight (press): approx. 24 t
Condition of the baler:
The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation.
The following refurbishment works were carried out:
- Machine cleaned, partially derusted and partially repainted
- Hydraulic oil tank drained completely and cleaned
- Oil and air filters replaced, new hydraulic oil filled
- Press ram dismantled and cleaned
- All four running rollers on the press ram dismantled and replaced
- Wire station with deflection rollers for the lower wire cleaned and made operational
- Side guides removed from press ram, smoothed, mounted, and readjusted
- Main hydraulic cylinder dismantled and stripped for inspection
- Piston rod replaced, cylinder tube honed
- Complete set of seals replaced, pressure test performed
- Hydraulic hose for main hydraulic cylinder replaced
- Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced
- Chain cleaned, greased, and chain tension readjusted
- Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control
- Door contact switches checked and partially replaced
- Emergency stop switch checked
- Complete electrical wiring checked and partially renewed
- Bearings of wire guide rollers under the press replaced
- New safety guards for vertical and horizontal binding fabricated and installed
- Machine checked, general maintenance performed, and baler tested in both manual and automatic operation
Scope of delivery:
Only the baler itself is being offered for sale.
Remarks:
Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.
Mali oglas
Nizozemska
974 km
Balinirni stiskalnica 60 t
Presona ABLP 60 VH1
Presona ABLP 60 VH1
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, obratovalne ure: 30.143 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 570 kg, skupna masa: 20.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2026, volumenski pretok: 800 m³/h, Technical Data for Baler:
Manufacturer: Presona AB, Sweden
Model: LP 60 VH1
Year of manufacture: 2015
Total operating hours: 30,143 hours (as of July 2025)
Effective pump runtime: 6,527 hours (as of July 2025)
Number of bales pressed: 115,193 (as of July 2025)
Pre-press force: 25 t
Main press force: 60 t
Specific pressing force: 73 N/cm²
Feed hopper dimensions: 1,500 x 1,100 mm
Filling volume per press cycle: 2.7 m³
Theoretical throughput: 800 m³/h
Throughput under operating conditions: 350 m³/h
Bale dimensions: 1,100 x 750 mm
Drive power: 37 kW
Binding: 5-fold vertical, fully automatic
Throughput at bulk density of 50 kg/m³: 11 to 14 t/h
Bale weights: 420 to 570 kg (material dependent)
Hydraulic oil tank volume: 600 L
Baler dimensions (assembled with hopper): 10,100 x 3,750 x 4,310 mm (L x W x H)
Transport dimensions (baler only): 10,100 x 2,400 x 3,000 mm (L x W x H)
Machine weight (baler): approx. 20 t
Condition of the baler:
The baler was partially overhauled in our workshop and subsequently tested in both manual and automatic modes.
The following maintenance work was performed:
- Machine cleaned, partially derusted and partially repainted
- Hydraulic oil tank fully emptied and cleaned
- Oil and air filters replaced; new hydraulic oil filled
- Press ram disassembled and cleaned
- All four running rollers of the press ram removed and replaced
- Grease cartridges of the automatic roller lubrication system replaced
- Slide rails at the press floor in the pressing chamber cut out
- Undercarriage reinforced with welded plates
- New HARDOX slide rails welded in
- Wire station with guide pulleys for lower wire cleaned and made operational
- Slide rails on press channel floor cut out
- New HARDOX slide rails welded in
- Both side walls of the press channel removed and derusted
- Worn side wall plates cut out
- Complete side walls fitted with new wear plates and welded
- Main hydraulic cylinder disassembled and inspected
- Piston rod replaced, cylinder barrel honed
Lsdpjy S Rtlefx Adlohg
- Complete seal kit renewed; pressure test performed
- Vertical needle system for binding disassembled, cleaned, wire guide pulleys serviced
- Chain cleaned and lubricated; chain tension reset
- Drillomat cleaned; wire cutter, drill shafts and twisting fingers checked, retightened to specified torque and serviced
- Machine inspected, general maintenance performed, and press tested in both manual and automatic modes
Notes:
The baler is sold without conveyor belt and without wire stations. Inspection by arrangement possible. We assume no liability for technical data or any errors.
Mali oglas
Nizozemska
974 km
Balinirni stroj 200 t z vodoravno vezavo
MACPRESSE EUROPA S.R.L.112
MACPRESSE EUROPA S.R.L.112
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.000 kg, kapaciteta rezervoarja za olje: 3.100 l, lastna masa: 50.800 kg, leto zadnje generalne obnove: 2025, volumenski pretok: 795 m³/h, Technical Data – Baler:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of manufacture: 2002, partially overhauled in December 2025
Operating hours: 44,590 hours, as of December 2025
Main press force: 200 t
Specific press force: 16.5 kg/cm²
Feed hopper dimensions: 2,000 x 1,020 mm
Filling volume: 2.65 m³
Theoretical throughput: 795 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput for MSW: approx. 48 to 54 t/hour, depending on material
Hydraulic oil tank volume: 3,100 L
Machine weight (baler): approx. 50.8 t
Scope of delivery:
1 unit MACPRESSE baler, type 111A
1 set Operating manual with CE Declaration of Conformity, electrical and hydraulic schematic
Lhsdpfxoy S Rruo Adlsg
Notes:
The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced:
• Hydraulic oil tank drained and cleaned
• Oil and air filters replaced
• Filled with new hydraulic oil
• All hydraulic hoses replaced
• Dismantling of press ram, complete disassembly, mechanical parts freed and serviced
• Front two main running rollers replaced
• Blades on press ram replaced
• Main hydraulic cylinder disassembled and inspected, cylinder tube and piston rod checked, complete seal kit replaced
• Counter blade in frame replaced
• Blade gap set to approx. 3 mm
• Upper steel guide rails in frame (left and right) replaced
• Worn press floor cut out, base plate replaced with wear-resistant HARDOX steel
• Tying and twisting unit dismantled and serviced, all twisting shafts and ball bearings replaced
• All wire rolls in needle heads replaced
• Wire cutters cleaned and adjusted, chains lubricated and tensioned
• All wire guide rollers serviced
• All door limit switches replaced
• Air separator dismantled, disassembled and serviced
• General maintenance performed
Finally, the baler was subjected to a machine test in manual and automatic mode. See video for machine function test.
The documentation (Operating manual, CE, electrical/hydraulic diagrams) is complete. Inspection by appointment is possible. We assume no liability for the technical information or possible errors.
Mali oglas
Nizozemska
974 km
Balinirni stroj s pritisno silo 170 t in s transportno tehnologijo
MACPRESSE EUROPA S.R.L.111
MACPRESSE EUROPA S.R.L.111
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 900 kg, skupna masa: 40.000 kg, kapaciteta rezervoarja za olje: 3.000 l, leto zadnje generalne obnove: 2025, volumenski pretok: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for under-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baling press, two complete wire tying racks each with 5 wire spool holders (wire not included).
Technical data - Press:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 111A
Lhsdpfjy S Rqwox Adljg
Year of manufacture: 1996, overhauled in 10/2024
Main press force: 170 t
Specific press force: 14 kg/cm²
Feed chute dimensions: 1,800 x 1,020 mm
Filling volume: 2.5 m³
Theoretical throughput: 750 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 55 kW
Tying: 5-fold horizontal, fully automatic
Throughput rates: approx. 30 to 35 t/hour, depending on material
Hydraulic tank volume: 3,000 l
Transport dimensions (press with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H)
Machine weight (press): approx. 40 t
Remarks:
The baling press was partially overhauled in our workshop and fully tested after completion—see our function video for reference. Previously, paper and cardboard from municipal collection were pressed with the system. The operation was reassigned after the contract period ended, so the entire plant is for sale.
Details of the overhaul and replaced spare parts can be found in the detailed photo documentation and our offer.
The full documentation (manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. No liability assumed for technical data or possible errors.
Technical data - Conveyor belt:
Manufacturer: Wagensfeld B.V.
Model: Chain belt conveyor 1700 mm
Year of manufacture: 2017
Drive power: 7.5 kW
Belt speed: 14 m/minute
Feed belt length: 6,900 mm
Inclined belt length: 12,885 mm
Gooseneck length: 1,747 mm
Total length: 21,271 mm
Incline: 32°
Usable width: 1,644 mm
Drive axle height above ground: 5,777 mm
Feed belt wall height: 500 mm
Inclined belt wall height: 880 mm
Steel cleat height: 40 mm
Cleat spacing: 1,200 mm
Transport dimensions (disassembled): 15,005 x 2,503 x 2,435 mm (L x W x H)
Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D)
Remarks:
The chain belt conveyor, built in 2017, was custom-built and installed to fit the press at its last installation in the Netherlands. The conveyor is in good, ready-to-use condition and has therefore not been overhauled. A layout drawing with pit dimensions is available.
Scope of delivery:
1 x Chain belt conveyor, Wagensveld B.V.
1 x Feed hopper with pre-compactor flaps
1 x Agitator
1 x MACPRESSE baling press, type 111A
2 x Wire tying racks with wire spool holders, without wire
1 x Operating manual with CE declaration, electrical and hydraulic wiring diagrams
Mali oglas
Nysa
513 km
Balairka
HSMVK 4812
HSMVK 4812
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 1.950 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 750 mm, višina bale: 1.100 mm, teža bale: 550 kg, Oprema: dokumentacija / priročnik, Automatic baler HSM VK 4812
The machine is in perfect condition. It has only 1,950 operating hours and has processed just 1,314 bales of material. The baler has been regularly serviced and has operated indoors since new. It has worked with very low-contaminant material—mainly textile offcuts.
Key advantages of the machine:
- Actual throughput: 6–13 t/h
- Optimal continuous operation: 6–10 t/h
- Very fast cycle → ideal for integration with conveyor lines
- Significantly better performance than the 15–22 kW version with high material flow
Technical data:
Pressing force: 480 kN (approx. 48 tons)
Motor power: 30 kW
Ljdpfxey Sm Sqs Adljhg
Connection load: approx. 32 kW
Power supply: 3 × 400 V / 50 Hz
Specific pressure: 58.2 N/cm²
Volume throughput: up to 332 m³/h
Weight throughput (practical):
approx. 6 t/h (20 kg/m³)
approx. 13 t/h (50 kg/m³)
Theoretical max. throughput:
up to 16.6 t/h at 50 kg/m³
Idle cycle time: approx. 11.2 s
Bale dimensions: 1100 × 750 × 600–1200 mm
Bale weight: up to approx. 550 kg
Press channel: 1100 × 750 mm
Feed opening: approx. 1020 × 1250 mm
We also have other balers in stock.
Transportation costs depend on weight, volume and, most importantly, distance. For inquiries, please provide the following information: delivery address (postal code and city). Further details require a phone call, so please inquire by phone about transportation costs and alternative delivery methods.
Our contact details can be found in the seller’s legal information.
We sell and export worldwide. Thanks to our large warehouse capacity, we can also supply larger quantities flexibly and quickly.
We issue intra-Community invoices – VAT-exempt.
Opening hours:
Mon-Fri: 8:00–16:00
Sat: closed
Mali oglas
Giraitė
1.162 km
Stiskalnica za odpadke Orwak 5070
Orwak5070
Orwak5070
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 3 t, Stiskalnica Orwak 5070 v popolnem delovnem stanju. Popolnoma servisirana, z novim oljem. Popolnoma opremljena – nosilci za trakove, trakovi, kavelj, voziček za bale.
Lsdpsy Sk H Ssfx Adlohg
Mali oglas
Giraitė
1.162 km
Stiskalnica za odpadke Orwak 3325
Orwak3325
Orwak3325
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 26 t, Orwak 3325 balirni stroj v brezhibnem delovnem stanju. Popolnoma servisiran, novo olje. Popolnoma opremljen. Ima dodatne dele za vezanje z žico.
Lhedey Sk Atopfx Adlog
Mali oglas
Stuhr
887 km
Balairka
PrestoHPK 50 HS
PrestoHPK 50 HS
Pokliči
Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 5.812 h, Funkcionalnost: popolnoma funkcionalen, Baling Press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined conveyor (slat belt conveyor)
Lhsdpfx Adjy R Tp Tjlsg
Manufacturer: Presto
Model: HPK 50 HS
Year of manufacture: 2012
Operating hours: 5,812
Drive: 30 kW
Pressing force: 50 t
Feed opening: 1,600 x 650 mm (L x W)
Channel cross-section: 700 x 950 mm
Max. feed volume: 1.06 m³
Cycle time: 19 s
Tying: 4-fold
Throughput at
35 kg/m³: 5.5 t/h
60 kg/m³: 8.8 t/h
100 kg/m³: 12.7 t/h
Bale weight: up to 500 kg
Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H)
Machine weight: approx. 10,500 kg
Perforator, hydraulically movable
Drive power: 2 x 4 kW / 400 V
Throughput: approx. 220 m³/h
Clear feed opening: 1,380 x 1,200 mm
Inclined conveyor
Length: 7,931 mm
Belt width: 1,400 mm
Total width: 2,026 mm
Incline: 29°
Speed: 0.6 m/s
Materials: Paper, cardboard, film, PET bottles
Please note:
All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of these details or for any errors. Offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment only. Sale is ex works, against prepayment, without warranty or guarantee.
Mali oglas
Stuhr
887 km
Balairka
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021
Technical data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 450
Pressing force: 60 t
Drive power: 4 kW
Feed opening: 1195 x 645 mm
Feed height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Tying: manual
Theoretical cycle time (idle): 25 s
Theoretical throughput: 12 cbm/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Suitable materials: film, paper, cardboard
Comment: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel.
Please note:
All technical data are based on information provided by the manufacturer. We do not assume any liability for the accuracy of the information or for any possible errors.
Offers are subject to change, prior sale reserved, and may be withdrawn at any time.
Viewings are possible by appointment.
Sale is ex location, without warranty or guarantee.
Our payment terms are 100% advance payment.
Lodpsy R Srtjfx Adlohg
Mali oglas
Oudehorne
993 km
Balirni stroj, stiskalnica za odpadke, stiskalnica za oblačila, recikliranje
HSMV-Press 1160 Plus
HSMV-Press 1160 Plus
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, širina odprtine za polnjenje: 1.195 mm, dolžina polnilne odprtine: 65 mm, dolžina bale: 120 mm, širina bale: 110 mm, višina bale: 120 mm, teža bale: 550 kg, skupna širina: 1.570 mm, skupna višina: 2.985 mm, skupna dolžina: 1.800 mm, skupna masa: 2.403 kg, Znamka: HSM
Tip: V-Press 1160 plus
Leto izdelave: 2008
Ljdpfx Aey R Sk Nodlshg
Tlačna sila: 532 kN
Napetost: 400 V
Maks. teža bale: do 550 kg (odvisno od materiala)
Dimenzije bale: 120 x 110 x 120 cm
Teža stroja: 2403 kg
Dimenzije stroja: 180 x 157 x 298,5 cm
Velikost polnilne odprtine: 119,5 cm × 65 cm
Stanje: zelo dobro!
Video delujočega stroja je na voljo na zahtevo
Možen je tudi prevoz
Mali oglas
Nizozemska
974 km
Balin stiskalnica 50 t, pogon 22 kW z wirbulatorjem
PresonaLP 50 EH1
PresonaLP 50 EH1
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 22 kW (29,91 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 530 m³/h, Technical Data - Baler:
Manufacturer: Presona AB
Model: LP 50 EH1
Year of manufacture: 2005
Operating hours: 30,408 hours (as of April)
Number of bales pressed: 198,059 pieces (as of April)
Main press force: 50 t
Specific press force: 63 N/cm²
Theoretical throughput capacity: 530 m³/hour
Throughput capacity under operating conditions: 260 m³/hour
Feed opening dimensions: 1,250 x 1,100 mm
Press chamber volume: 2.2 m³
Bale dimensions: 1,100 x 720 mm, length variable
Drive power: 22 kW
Tying system: 5-fold vertical, fully automatic
Throughput rates at bulk density of
30 kg/m³: 6 to 7 t/h
50 kg/m³: 7 to 9 t/h
100 kg/m³: 11 to 14 t/h
Bale density (paper/newspapers): 400 to 550 kg/m³
Hydraulic oil tank volume: 600 L
PLC control: Telemecanique TSX Micro
Control panel: Schneider Magelis
Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H)
Transport weight (baler): approx. 16 t
Condition of the baler:
The machine has undergone partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is available for sale at short notice.
The following refurbishment work was carried out:
General work:
- Machine cleaned, derusted, primed, partially repainted
- Wire run-in marks at the channel passes welded and smoothed
Hydraulic unit:
- Hydraulic oil tank completely drained, tank cleaned, new oil filled
- Oil and air filters replaced
- Leaking oil sight glass on hydraulic tank replaced
- All hydraulic hoses replaced
Lhjdpfx Adsy R Npislog
Electrics:
- Language in program menu set to English
- Two key switches on control panel replaced
- Control cabinet replaced
- Indicator lamp on control cabinet replaced
- Flap limit switch replaced
- Whirlator electrics replaced, connected, and tested
Press ram:
- All four press ram rollers removed and replaced
- Main hydraulic cylinder disassembled, serviced, and partially overhauled; cylinder tube honed, complete seal kit replaced, leak test carried out
- All plastic wear pads on press ram replaced
Pre-press flap:
- Both bearings on pre-press shaft replaced
- Both hydraulic cylinders disassembled, serviced, and partially overhauled; both cylinder tubes honed, complete seal kits replaced, leak test carried out
- Scraper flap on pre-press replaced
Tying unit:
- Two complete needles with wire deflection rollers replaced
- Needles adjusted and set
- All wire guide rollers in needle heads replaced
- Twister finger replaced
- Two twister shafts replaced
- All 8 wear plates on drillomat, below the twister fingers, replaced
Scope of delivery:
Only the baler is sold.
Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. No liability is accepted for technical data or possible errors.










































































































































































































































































































































