Ets.ATALLAH

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 537.000 km, prva registracija: 09/2018, vrsta goriva: dizel, lastna masa: 8.850 kg, največja dovoljena obremenitev: 9.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 6.175 mm, gorivo: dizel, energetska učinkovitost: C, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 10.750 mm, skupna širina: 2.550 mm, skupna višina: 3.800 mm, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.700 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, klimatska naprava, popolna servisna zgodovina, računalnik na krovu, registracija tovornjaka, registracija vozila, servovolan, zapora diferenciala,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating hours: approx. 18,000 h in automatic mode Year of manufacture: 2017 Kjdpfx Ahox Nhgws Asnf Injection unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2400 bar Dosage volume: 113 ccm Clamping unit: Clamping force: 140 t Tie bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping system: hydraulic Control system: CC 300 - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-efficient, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total operating hours: 25,369 h Euromap 67 Robot interface 8x air valve 5x hydraulic core pull 16-zone hot runner control Reinforced injection units – bimetal Main drives - 2x servo motor with inverter control Proportional valves on injection units – precise dosing Parallel movements Integrated Kistler quality pressure control system – mould pressure measurement Screw diameter in vertical injection unit: ⌀25 mm – approx. 58 g/PS Option to purchase original Foboha rotary table at additional cost Rotary table diameter: 740 mm Sepro Multi Inject 20 Robot Year of manufacture: 2017 3-axis robot: All axes powered by servo motors (electric): X, Y, Z (telescopic) Axis strokes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touchscreen control panel Robot safety package Robot with adapter and protective housing Robot purchase available at additional cost Dimensions: Weight: 10,300 kg LxWxH: 5.56x1.76x3.46 m All machines offered are started up by our service technicians before sale. A video of the technical tests for the selected machine can be provided or you can participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 754.866 km, moč: 375 kW (509,86 KM), prva registracija: 07/2020, vrsta goriva: dizel, velikost pnevmatike: 385/65 R22,5, konfiguracija osi: 6x2, medosna razdalja: 41.000 mm, gorivo: dizel, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 12.000 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2020, Oprema: ABS, drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, hladilnik, klimatska naprava, navigacijski sistem, tempomat,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production Line with Sepro SR S5-25 S3 Trans Robot / Operating hours: approx. 18,000 h in automatic mode Kodjx Nhgkepfx Ah Aenf Year of manufacture: 2013 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping Unit: Clamping force: 160 t Tie bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touchscreen Additional equipment: 2-component injection molding machine with rotary table and robot Tie-barless machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total operating hours: 24,312 h Euromap 67 Robot interface Air valves x 5 Hydraulic core pulls x 5 Hot runner control x 16 Reinforced injection units – bimetallic Main drives: 2 x servo motors controlled with inverter Proportional valves on injection units – precise injection Screw diameter (vertical injection unit): ⌀22 mm – approx. 28 g/PS Option to purchase rotary table available Robot Sepro SR S5-25 S3 Trans Year of manufacture: 2013 3-axis robot: drive by servo motors (electric) on X, Y, Z (telescopic) Axis travels (approx.): X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel Safety package for robot Robot with adapter and protective housing Robot purchase possible at additional cost Dimensions: Weight: 8,700 kg Length/Width/Height: 5.35x1.76x3.42 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Engel Victory 200H/60W/180 Combi / Production Line with Engel Viper 20 Robot Year of manufacture: 2015 Injection Unit: Screw diameter: 22 mm Shot weight: approx. 54 g Injection pressure: 2392 bar Dosage volume: 61 cc Clamping Unit: Clamping force: 180 t Tie bar spacing: 0 x 0 mm Platen size: 1020 x 980 mm Ejector: hydraulic Clamping system: toggle lever Control: CC 300 - touchscreen Additional Equipment: 2K machine with original Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving, high-speed, and very quiet Knsdpfx Ahjx Nhgdo Asf Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air valves x 4 Hydraulic core pullers x 6 Hot runner control x 36 Reinforced injection units – bimetal Second injection unit is inclined, screw diameter 15 mm (18 cm³ / 2203 bar) Main drives – 2 x servo motor controlled with inverter Proportional valves on injection units – precise injection Kistler sensor – mold pressure control Parallel movements The machine has an additional servo motor for tool drive Inputs/outputs for peripheral devices Engel Viper 20 Robot Year: 2015 High-speed robot, 5 axes: X, Y, Z, A, C axes driven by electric servo motors Robot is integrated with the machine and comes with an additional control panel Robot safety package Robot with adapter and safety housing Dimensions: Weight: 13,200 kg Length/Width/Height: 5.86 x 1.98 x 2.51 m All offered machines are started up by our service technicians before sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our company site in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Engel e-max 440/180 / Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Dosing volume: 220 ccm Clamping Unit: Clamping force: 180 t Tie bar spacing: 520x520 mm Platen size: 760x775 mm Ejector: electric Clamping system: toggle lever Control: CC 200 - Touchscreen Additional Equipment: Machine in very good technical condition, operated in clean production environment Electric machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Kedpfjx Nhf Tex Ah Ajnf Air valves x 3 Hardened injection unit – bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor – mould pressure regulation Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87x1.42x2.00 m All machines offered are put into operation by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or participate in live technical demonstrations at our premises in Łódź. Price: On request

Stanje: dober (rabljeno), prevoženi kilometri: 354.920 km, moč: 199 kW (270,56 KM), prva registracija: 07/2017, vrsta goriva: dizel, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 4x2, medosna razdalja: 5.500 mm, gorivo: dizel, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2017, Oprema: AdBlue, centralno zaklepanje, dvižna zadnja plošča, spojler, = Dodatne opcije i oprema = - Radna svetla pozadi - Radna svetla napred Knedpfx Asx Nhfyeh Ajf - Grejani retrovizori - Prednje staklo - Kabina - Automatsko zagrevanje = Napomene = Mercedes Benz Antos 1827 4x2 - Sanduk sa bočnim vratima - Zepro podizna platforma - Potpuno vazdušno ogibljenje - Euro 6 Godina proizvodnje: 5-7-2017 Kilometraža: 354920 Broj šasije: WDB96300310147017 Dimenzije sanduka: 7.63 x 2.48 x 2.55 m Sanduk sa bočnim otvaranjem Zepro podizna platforma Potpuno vazdušno ogibljenje Euro 6 = Dodatne informacije = Dimenzije pneumatika: 315/80R22.5 Ogibljenje: Vazdušno ogibljenje Prednja osovina: Maks. opterećenje osovine: 8000 kg; Upravljana; Šara pneumatika levo: 70%; Šara pneumatika desno: 70% Zadnja osovina: Duple gume; Maks. opterećenje osovine: 11500 kg; Šara pneumatika levo unutra: 70%; Šara pneumatika levo spolja: 70%; Šara pneumatika desno unutra: 70%; Šara pneumatika desno spolja: 70% Podizna platforma: Zepro, zadnja vrata Tehničko stanje: dobro Vizuelno stanje: dobro Za više informacija kontaktirajte VAEX The Truck Traders.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Dosage volume: 618 cm³ Kodpfxox Nhfts Ah Asnf Clamping Unit: Clamping force: 275 t Tie bar spacing: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Control with hot runners x 16 Hardened injection unit – bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Engel Victory 2550/400 Tech Ecodrive with Sepro Industrial Robot Success 22 / Hybrid Machine / Operating hours: approx. 300 h in automatic mode Year of manufacture: 2017 Injection Unit: Screw diameter: 80 mm Shot weight: approx. 1450 g Injection pressure: 1640 bar Metering volume: 1558 ccm Clamping Unit: Clamping force: 400 t Tie bar spacing: 0x0 mm Platen size: 1320x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 – touchscreen Additional Equipment: Machine in perfect technical condition, like new Tie-bar-less hybrid machine: energy-efficient and very quiet Operating hours: approx. 300 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Injection unit is wear-resistant and corrosion-resistant Kodpfxox Nhfmj Ah Aonf Clamping and injection unit are servo-driven Proportional valve on injection unit – precise injection Stäubli QMC 122/V3 magnetic clamping system, integrated in the machine control (the platens have an additional dedicated control unit) – optional at extra cost Sepro Industrial Robot Success 22 Year of manufacture: 2018 5-axis robot Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 26,600 kg Length/Width/Height: 7.70x2.34x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: - Screw diameter: 80 mm - Shot weight: 1464 g - Injection pressure: 1855 bar - Dosing volume: 1608 cm³ Clamping Unit: - Clamping force: 400 t - Tie bar spacing: 920 x 830 mm - Platen size: 1280 x 1240 mm - Ejector: hydraulic - Clamping system: hydraulic Control: MC5 - Touchscreen Additional Equipment: - Very good technical condition - Operating hours: approx. h in automatic mode - Euromap 67 - Robot interface - Min./max. mould installation height: 400/900 mm - Air valve x 4 - Hydraulic core pull x 4 - Hot runner control x 36 - Self-sealing nozzle x 10 - Injection unit hardened - bimetallic - Proportional valve on injection unit – precise injection - Function for automatic withdrawal of upper tie bar Kedpfxjx Nhfgs Ah Aenf - Machine has been regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 Robot - Year of manufacture: 2018 - High-speed robot - 5-axis robot: 5 axes are powered by servo motors (electric): X, Y (telescopic), Z, B (rotation) and C - Vacuum - Touch control panel - Robot with adapter, conveyor belt and safety enclosure - Purchase of robot and conveyor belt at extra cost Dimensions: - Weight: 22,650 kg - Length/Width/Height: 7.58 x 2.73 x 2.32 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Knedpfx Aex Nhfaoh Aof Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 386.000 km, prva registracija: 06/2025, vrsta goriva: dizel, lastna masa: 9.000 kg, največja dovoljena obremenitev: 9.000 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 6.750 mm, gorivo: dizel, energetska učinkovitost: C, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 10.750 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.700 mm, Leto izdelave: 2017, Oprema: ABS, Tahograf, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, klimatska naprava, popolna servisna zgodovina, računalnik na krovu, registracija vozila, servovolan, tempomat, Dimenzije karoserije: tauliner zaboj 8,65 m x 2,70 m x 2,55 m + pomična streha + vgradna dvižna ploščad 2.000 kg. Dodatna oprema: klimatska naprava, avtomatski menjalnik, motorna zavora, zadnje zračno vzmetenje, vzvratna kamera, tempomat, CD radio, potovalni računalnik, električni pomik stekel, sistem proti trčenju, sistem za ohranjanje voznega pasu, pomoč pri speljevanju v klanec, prostoročno telefoniranje… Kedpfx Ajx Nhdvjh Asnf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Plasticizing volume: 679 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - Touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system with 10 hot runner zones Injection unit hardened – bimetallic screw Energy-efficient machine – features a system with 3 variable delivery hydraulic pumps Parallel movements Proportional valve on injection unit – precise dosing Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 robot Year of manufacture: 2019 4-axis robot: 3 axes driven by electric servomotors; C axis – pneumatic Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m Knedpex Nhdisfx Ah Ajf All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: skoraj kot novo (rabljeno), dolžina police: 3000 mm širina police: 1300 mm število batov: 6 ogrevanje z vodo Ksdpox Nhc Esfx Ah Aenf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei KM 130-750 CX Leto izdelave: 2010 Vbrizgalna enota: Premer polža: 40 mm Teža vbrizga: 228 g Tlak vbrizga: 2500 bar Dozirni volumen: 251 ccm Zapiralna enota: Zapiralna sila: 130 t Razmak med vodili: 470x470 mm Velikost vpenjalnih plošč: 745x770 mm Izmetalec: hidravlični Zapiralna enota: hidravlična Krmiljenje: MC5 Dodatna oprema: Euromap 67 Vmesnik za robota Hidravlični izvlek jedra x 1 Zračni izvlek jedra x 6 Krmiljenje z vročimi kanalizacijami x 18 Ksdpfx Ahsx Nhcxe Ajnf Vbrizgalna enota kaljena – bimetal Proporcionalni ventil na vbrizgalni enoti – natančen vbrizg Dimenzije: Teža: 9000 kg Dolžina/Širina/Višina: 4,90x1,60x2,10 m Vsi ponujeni stroji so pred prodajo zagnani s strani naših serviserjev. Možno je prejeti video tehničnega testa izbranega stroja ali sodelovati na tehničnih testih v živo v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection Unit: Screw diameter: 45 mm Shot weight: 278 g Injection pressure: 2,336 bar Dosing volume: 305 cm³ Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 470 mm Knsdpox Nhcrofx Ah Aef Platen size: 745 x 770 mm Ejector: hydraulic Clamping unit: hydraulic Control System: MC IV Additional Equipment: - Machine in very good technical condition - Euromap 12 - Robot interface - Air valve x 1 - Hydraulic core pull x 1 - Controller with 12 hot runner zones - Injection unit hardened – bimetallic - Parallel movements - Proportional valve on the injection unit – precise injection - Machine equipped with cylinder/battery with compressed nitrogen (additional charge for rapid operation) - Machine regularly serviced by Krauss Maffei authorized service in Switzerland Dimensions: Weight: 6,200 kg Length/Width/Height: 4.66 x 1.51 x 2.19 m Drive: Pump/Motor: 18.5 kW Heating capacity: 16 kW Total power: 34.5 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Kodpfx Ahox Nhb Us Aonf Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: dober (rabljeno), Leto izdelave: 2008, Professional packaging machine from a renowned European manufacturer. Suitable for packaging items such as catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically transported through the machine and wrapped in film. The packaged product is conveyed at working height via a transport belt. Technical specifications: - Packaging capacity up to 1,200 products per hour. - 220-230V / 50-60 Hz. - Form shoulder machine. - Flat film of various thicknesses. - Cross seal seam / longitudinal back seal. - Independent hot-wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on caster wheels, with locking function. Knjdjx Nhbzjpfx Ah Asf Adjustable parameters / options via display: - Piece and production counter. - Pressure of longitudinal sealing jaw. - Pressure of cross sealing jaw. - Pressure of guide rollers. - Sealing time. - Operating temperature of sealing jaws. - Idle temperature of sealing jaws. - Film slackening. - Bag length. - Cycle start. - Lock time of counterpressure rollers after product passage. Scope of delivery includes an operating manual with wiring diagram. The machine can be demonstrated under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Knsdpfjx Nhbbjx Ah Ajf Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, nosilnost: 2.000 kg, skupna masa: 1.150 kg, medosna razdalja: 2.843 mm, Na dražbi je komplet 8 viličarjev STILL CX 20 (letnik 2008)! Tehnični podatki temeljijo na podatkovnem listu za letnike cca 2007–2016. TEHNIČNI PODATKI Nosilnost: 2.000 kg Medosna razdalja: 2,843 m Hitrost vožnje z obremenitvijo: ~9 km/h Hitrost vožnje brez obremenitve: ~12,5 km/h PODROBNOSTI O STROJIH Moč pogonskega motorja: cca 3 kW Knedpfxox Nha Dj Ah Asf Moč dvižnega motorja: cca 2,2 kW Mere in teža Transportne mere (D x Š): 3,81 x 0,80 m Lastna teža: 1,15 t Teža baterij: cca 0,41 t OPREMA 7 polnilnikov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, protective enclosure Robot available for additional price Dimensions: Weight: 4,400 kg Kodpfx Ahex Nhaqs Ajnf Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 Injection unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2100 bar Dosing volume: 251 cm³ Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 640x640 mm Ejector: hydraulic Kjdpex Nhadofx Ah Aenf Clamping system: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hot runner control x 12 zones Injection unit is wear-resistant and corrosion-proof Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pump/motor: 18.5 kW Heating capacity: 12.1 kW Total installed power: 30.6 kW All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of your chosen machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / Electric Machine / Approx. 16,000 Operating Hours in Automatic Mode Year of Manufacture: 2017 Injection Unit: Screw Diameter: 35 mm Shot Weight: 153.8 g Injection Pressure: 2083 bar Dosage Volume: 169 cc Clamping Unit: Clamping Force: 110 t Tie Bar Distance: 470 x 420 mm Platen Size: 680 x 660 mm Ejector: electric Clamping System: toggle lever Control System: UNILOG B8 – Touchscreen Additional Equipment: Perfect technical condition Electric machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control Injection unit is wear-resistant and corrosion-resistant Central lubrication Automatic mold height adjustment Parallel movements The machine has been serviced in Germany Wittmann W818 Robot Year of Manufacture: 2015 4-axis robot: 3 axes driven by servomotors (electric); C-axis – pneumatic Axis travel: X-420, Y-1200, Z-2000 Touchscreen control panel Safety package for robot Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at extra cost Ksdpfxsx Ng U Tj Ah Asnf Dimensions: Weight: 4800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All offered machines are started and checked by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Battenfeld BA 1300V/315 V-R / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 1997 Injection unit: Screw diameter: 40 mm Shot weight: 182.9 g Injection pressure: 1575 bar Dosage volume: 201 cc Clamping unit: Knjdpfx Aox Ng U Hoh Asf Clamping force: 130 t Tie bar distance: 454x740 mm Platen size: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm Vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7,500 kg LxWxH: 3.83x2.33x4.16 m Drive: Pump/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 580.000 km, prva registracija: 09/2015, vrsta goriva: dizel, lastna masa: 1.500 kg, največja dovoljena obremenitev: 7.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 6.600 mm, gorivo: dizel, energetska učinkovitost: C, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, skupna širina: 2.550 mm, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.750 mm, Leto izdelave: 2015, Oprema: ABS, Tahograf, centralno zaklepanje, električno nastavljivo ogledalo, klimatska naprava, popolna servisna zgodovina, računalnik na krovu, registracija vozila, servovolan, tempomat, Dimenzije Karoserije TAULINER KONTEJNER 8,60 m * 2,75 m * 2,55 m + DRSNA STREHA + RETRAKTILNA DVIGALNA VRATA 1.500 KG. Dodatki Kedpfx Ahsx Ng Uyj Asnf Klima, avtomatski menjalnik, motorna zavora, grelec, zadnje pnevmatsko vzmetenje, tempomat, CD radio, potovalni računalnik, električna dvigala, sistem za preprečevanje trka, sistem za pomoč pri ohranjanju voznega pasu, centralno zaklepanje…