Mecánica Comercial Meco, S.L.

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 1981, dolžina bročanja: 400 mm, Naprodaj je Leistritz Polymat stroj za vlečenje utorov. Gre za nadgrajen stroj Stuhlmann. Fpodpfx Ahoxmg Ace Den Stroj je delujoč, občas pa se pojavi slab stik. Obstoječa dodatna oprema: vodila noža WC2 / WC3 / WC4, različne podajalne palice ter 2 nosilca nožev WC7, glej slike.

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Keyway width: 2-25 mm Tensile force - max.: 0.6 t Bore diameter: 10-350 mm Load capacity: 10,000 kg Pulling speed: infinitely adjustable 0.01-20 mm/min Infeed: freely programmable 0.01-5 mm Table size: 550 x 675 mm Fpjdpfx Aexl Ufpoh Den Workpiece outside diameter: max. 500 mm Working height: 1,050 mm (table height) Total power requirement: 3 kW Machine weight approx.: 1,000 kg 1 pc. used keyway broaching machine LEISTRITZ POLYMAT 25/300 NC Manufacturer's description: Due to its flexibility, the POLYMAT 25/300 is particularly suitable for single and small batch production. It features menu-guided programming, storable processing points, and error displays, which simplify operation and minimize mistakes. Main application: Through keyways/profiles in through bores, both as single keyways and for multiple keyways.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Višina dviga: 350 mm Premer vrtljive mize: 800 mm Prečni pomik mize: 600 mm Vzdolžni pomik mize: 650 mm Fodpfxsxk T Rhj Ah Dspn Nastavljiv hod: 400 mm

Stanje: novo, Hidravlični vlečni stroj Fodpfxjxhci Io Ah Djpn

Stanje: rabljeno, Bystronic Byspeed 3015 – Stroj za lasersko rezanje z avtomatizacijo Bytrans (2007) Proizvajalec: Bystronic Laser AG, Švica Model: Byspeed 3015 Leto izdelave: 2007 Fpedpfx Ahexgnzgj Don Št. stroja: 652 Št. naročila: 30006335 Št. opreme: 10022619 Tehnične specifikacije: • Delovno območje: 3000 x 1500 mm • Laserska moč: [prosim potrdite natančen laserski vir v kW, za ta model običajno 3–4,4 kW] • Napetost: 3x400 V, 50 Hz • Priključna moč: 52 kW • Največji tok: 125 A • Delež toka največjega porabnika: 39 A • Skupna teža: 800 kg (samo krmilna omara; skupna masa stroja večja) Vključena oprema: • Avtomatizirani sistem Bytrans (avtomatsko nalaganje in razlaganje) • Sistem za odvod prahu – vključen in v dobrem delujočem stanju • Hladilna enota (chiller) – vključeno in v dobrem stanju • CE certifikat • Proizvedeno v Švici Stanje: • Rabljeno, splošno v dobrem stanju • Opomba: Potrebno je popravilo turbine. Prejeli smo ponudbo v vrednosti približno 7.000 €. Poleg tega je stroj dobro vzdrževan. • Stroj je še vedno vgrajen – možno je ogledati delovanje po dogovoru • Na voljo takoj

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: Hidravlična giljotina Proizvajalec: HJO, Švedska Fpedpfx Ahexgcz Is Djn Leto: 1984 Največja debelina pločevine: 4 mm Največja dolžina pločevine: 2500 mm Največji delovni tlak: 21,0 MPa V 3 x 380 Hz 50 Teža: 3700 kg Hitro nastavljiva reža rezila, talno nožno upravljanje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, skupna masa: 950 kg, hod 170 mm, križna miza, avtomatsko prečno pomikanje Fpedpfexfr Rvox Ah Den

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, skupna masa: 2.000 kg, hod 300 mm, okrogla miza premera 500 mm Fpjdpfsxfq Iyex Ah Dsn

Stanje: novo, Leto izdelave: 2025, Povsem nov NC-krmiljena natančna vertikalna dleta za racionalno izdelavo utorov za pero. Meni vodeno programsko krmiljenje za globino utora, širino utora, globino reza, širino orodja, število zaključnih hodov. Na voljo opcijsko z delilno vrtljivo mizo. Premer delilne vrtljive mize Ø 320 mm – možne do tri CNC osi. Območje hoda dletnega drsnika 0 do 200 mm. Velikost mize 280 x 500 mm. Luknja v vpenjalni mizi Ø 80 mm. Izteg 350 mm. Največja višina obdelovanca 400 mm. Brezstopenjsko nastavljiva hitrost dleta 30 do 120 mm/min. Mere približno 1,2 x 1,2 m x višina 2,3 m. Pogonska moč 2,2 kW. Teža približno 2.200 kg. Fedpfxsxdi D Do Ah Dspn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Indeksirna miza 400 mm ročna Vključen komplet orodij Premer izvrtine na mizi 10 - 130 mm Širina ključa od 2 do 32 mm Fpodpfoxclfzsx Ah Djn Podajalna hitrost 0,5 - 5 m/min; Premer mize Ø: 690 x 460 mm Obremenitev mize: 2000 kg Pomik ramena: 0 - 425 mm Dolžina: 1300 mm Širina: 1100 mm Višina: 1400 mm Teža: 1800 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Na voljo je horizontalni zunanji broširni stroj Hoffmann. Vlečna sila: 25t, broširni hod: 4000mm, dolžina hoda: 400mm, hitrost broširanja: 40m/min, hitrost povratka: 45m/min, maksimalni delovni tlak: 70bar, količina hidravličnega olja: 630l, čas cikla pri 25m/min: pribl. 50s, izplen pri neprekinjenem obratovanju: pribl. 72 kosov/h. Dimenzije stroja X/Y/Z: pribl. 10000mm/7700mm/5000mm, teža: pribl. 50000kg. Vključuje podajalnik obdelovancev in avtomatizacijo, paket treh orodnih broširnih nosilcev. Različni rezervni deli (motorji, menjalniki itd.) so na voljo po povpraševanju. Dokumentacija na voljo. Možen je ogled na lokaciji. Fpedoxa Ei Iepfx Ah Dsn

Stanje: zelo dobro (rabljeno), Artrhur Klink RSH1 - 1250 brusilni stroj za broške 09.2009, nov 1979, miza 200 x 1800, elektromagnet 200 x 600, z ustreznim orodjem/dodatki, brez omare. Fsdpfx Asw U Upneh Djpn

Stanje: rabljeno, Leto izdelave: 1989, Pesto 600 mm hidravlični da brez dodatne opreme teža 3,7 t Fpsdpow Sykfjfx Ah Dsn

Stanje: dober (rabljeno), Vlečna sila - maks. 6 t Hod bata - maks. 800 mm Premer obdelovanca - maks. 40 mm Teža stroja pribl. 1,2 t Fjdpfxjw Saihe Ah Dspn Potreben prostor pribl. 2,0 x 0,8 x 1,4 m

Stanje: dober (rabljeno), Leto izdelave: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke: max. 630 mm - Scraping speed: 1–10 m/min Fpjdpow R Sz Tofx Ah Djn - Return speed: 7–25 m/min - Total connected load: 45 kW - Machine weight: 5,500 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Tool feeder stroke: max. 630 mm Fpedpfx Ahow R Szmo Den - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni stroj za mikroudarno označevanje PRO PEN P5000 (GravoTech Marking SAS), ki ga distribuira skupina HAHN+KOLB. Povsem industrijska oprema, namenjena trajnemu označevanju kovinskih in plastičnih delov – serijske številke, logotipi, kode, proizvodne oznake. Tehnični podatki: • Model: Propen P5000 Pn/d • Leto izdelave: 2010 • Napajanje: 100–240 V, 50/60 Hz • Moč: 150 W • Obratovalni tlak: 5,5 bara (pnevmatski pogon) • Proizvajalec: GravoTech Marking SAS, Francija • Operaterska plošča z zaslonom na dotik + tipkovnica HP • Stabilna delovna miza z vodili. Stroj je popoln, delujoč in pripravljen za takojšnjo uporabo. Idealen za delavnice, proizvodne obrate, orodjarne in povsod, kjer je zahtevano hitro in natančno trajno označevanje. Zelo dobro stanje – naprava je vzdrževana, z minimalnimi sledmi uporabe. Fedpew R Spqsfx Ah Dspn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, Vertical Broaching Machine Manufacturer: Blacks Model: 1 W-CNB 34 Machine No.: S05035C Year of manufacture: 04/2005 Weight: 95kg General / Technical Data: Very well-maintained broaching machine for external broaching of notches in tensile test specimens. Broaching speeds: variable from 0.43 to 2.27 m/min Dimensions (h x w x d): 1370mm x 600mm x 450mm Power supply: 400 Volt / 50 Hz Equipment: - Variable speed adjustment via a mechanical variable speed gearbox (brand: Lenze), no electronic control! - Clamping device for tensile test specimens - 3 broaching tools (used) - Machine documentation in German and English - Machine documentation with "CE" declaration of conformity in English General Information The dual spindle drive ensures stable and centralized pulling as well as consistent and uniform broaching speed. The broaching machine is a purpose-built machine for cutting V- and U-notches according to Charpy and Izod standards in pre-machined 10 mm standard square specimens. Fedpfxew Rpvzo Ah Dspn The CNB-34 produces a uniform notch of higher quality than can be achieved by milling. The machine is easy to operate and features a robust design, with removable service panels for easy routine maintenance. The construction enables a convenient working height. During the cutting process, a specially designed broaching tool is drawn across the specimen. The broaching tool is pulled downward inside the machine via a gearbox and dual spindle drive. The specimen is fixed in place within the machine by means of a special clamping device. The broaching tool is moistened with cutting oil. By pressing the broaching stroke button, the notching tool is positively guided downwards along the specimen, producing an accurate notch profile. After broaching, the specimen must be removed before returning the tool. The tool is returned without the workpiece and cleaned of resulting chips; only then is the unit ready for the next operation.

Stanje: dober (rabljeno), Hod bata - maks. 230 mm Izvlek 230 mm Premer mize 0 mm Na voljo: 2 kosa udarnih vreten za stroje za utorničenje zobnikov Lorenz tip LS 630 do LS 1250 Fjdpfow Ny S Rjx Ah Dopn 1 obnovljen kot nov 1 potreben obnove.

Stanje: zelo dobro (rabljeno), Koordinatni brusilni stroj Fpodow Nmiijpfx Ah Den

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand Fjdpfx Asw Ighieh Dspn - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of Manufacture: 2001/2023 Weight: 580 kg Overhaul: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current “CE” marking Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Equipment: - Drive with 2 speeds - Safety door with safety interlock and chip chute - Chip chute with tool tray - Electric monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Integrated coolant system with solenoid valve (controlled via swivel system) - Patented coolant/lubricant swivel system - Externally adjustable tool length setting system (replicable across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centring plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided closed splash guard cabin with tool tray (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, with the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, check valve, and drain tap), including the coolant/lubricant swivel system, is new - The coolant supply is controlled by a solenoid valve, which can be actuated via the swivel system - The pull bridge, clamping jaws, and rack segments are new - A switchable clamping jaw monitoring system has been implemented (additional safety for operator and prevention of tool breakage) - Safety door with safety interlock, signal indicator, and door lock - Tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches installed - All electrical equipment (control cabinet) is new - No PLC installed, making the machine electrically maintenance-friendly - New drive motor (SEW Germany) with brake - Machine has been newly painted with 2-component structural lacquer General Information: The dual-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed (optionally 3 m/min or 6 m/min). By design, the machine is quick and easy to set up for broaching with flat tools for keyway cutting. Fpodpfjw H Dgnox Ah Don Thanks to the universally designed pull bridge and machine table, broaching with profile and flat broaching tools is possible without using additional pull heads.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 400 kg, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with "CE" marking Pulling force: 3,000kg Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / working area: 430mm x 320mm / 340mm x 220mm Table opening: Ø 90mm for standard Rausch broaching mandrels Workpiece diameter: variable (removable coolant swivel system) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with stepped tool shank) Dimensions (H x W x D): 2,250mm x 800mm x 750mm (H = including 3-side safety enclosure) Motor: 2.5kW / 3.0kW Power supply: 400 Volt / 50 Hz Equipment: - Geared motor drive with 2 working speeds - Safety door with safety interlock (emergency stop circuit) - Easy-to-remove chip chute with tool rest - Tool length adjustment system adjustable from outside (Rausch system) - Protective panel for stroke adjustment and electrical switch units - Electrical sensing of clamping jaws (Tool removal control for prevention of unintentional return of pull bridge–added safety for operator & tool) - Integrated coolant system - Coolant swivel system (no electrical switch function) Fodew Huh Njpfx Ah Djpn - 3-sided enclosed splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip screen with magnet insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled; the machine frame has been fully reconditioned. The following wear parts have been replaced/renewed: - New trapezoidal screws and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - Cooling system incl. coolant/lubricant swivel system is new - New 2-speed SEW geared motor - New electrics (Siemens) - New safety door instead of a light barrier - New clamping jaws - All sheet metal parts, including covers, chip chute, basket, screen, and spindle guard, are new. - Stainless steel control panel with permanent labeling - Machine repainted with 2-component structural coating The machine bears the "CE" mark from the manufacturer. General Information The dual spindle drive ensures a smooth and central pulling point as well as a consistent broaching speed. The machine is primarily designed for the production of keyways up to 18mm (from 16mm keyway tools, only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Because of the universal construction of the pull bridge and machine table, it is possible to broach with both profile and flat broaching tools without the use of additional pull heads.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: 3813, skupna masa: 600 kg, moč: 7 kW (9,52 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, premer obdelovanca (maks.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of Manufacture: 2019 Never commissioned Complete documentation Without broaching tools (no broach pulls included) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 pcs, 14 mm wide, parallel/perpendicular to the clamping surface of the tool slide Accessories/Special Equipment: Fjdpfjw Evkiox Ah Dopn Coolant system Broaching tool safety device Machine hood for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LWH) Weight: 600 kg Voltage: 400 V Power supply: three-phase current Υ/Δ 50 Hz Rated power: 12 kVA Max. circuit protection: 25A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching tool holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½” Please submit inquiries by email only. All information provided to the best of our knowledge. Subject to change. This offer is directed exclusively to business customers as defined by § 14 BGB. Sale takes place with exclusion of any warranty. This exclusion does not apply to damages resulting from grossly negligent or intentional breach of duty by the seller, or for any injury to life, body, or health. For further information, please visit the Witzenmann GmbH website under the sections "Imprint", "General Terms and Conditions", and "Data Protection".

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 480 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, hitrost vzvratne vožnje: 100 mm/s, premer obdelovanca (maks.): 800 mm, skupna višina: 1.680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical data: New vertical broaching machine, make: Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table aperture: Ø 90 mm for standard broach holders “Rausch system” Workpiece diameter: unlimited (removable coolant swing system) Broaching capacity / keyway width: up to 20 mm in steel (from 16 mm broaching tool width only with stepped tool shank) Dimensions (H x W x D): 1370 mm x 680 mm x 750 mm (h = table height from floor without superstructures) Motor: 2.5 kW / 3.0 kW, 2-stage, for 2 operating speeds Power supply: 400 Volt / 50 Hz Features: Fpjdpfxew D E Twe Ah Don - Gear motor drive with 2 operating speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with lock, interlock check and safety monitoring - Easily removable chip chute with tool removal guard and storage option - Externally adjustable tool length system (machine-cross reproducible) - Protective cover for stroke adjustment and electrical switch units - Oil-tight storage surface on the control cabinet - Electric detection of clamping jaws (tool removal check to prevent unintentional return of pull bridge; added safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via swing arm - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical pre-installation for external control element (16-pin connector) - Provision for automatic clamping jaw opening for profile broaching via roller lever - Machine documentation with "CE" declaration of conformity Optional accessories: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (W x D x H) 700 x 350 x 600 mm - External electrical control unit for broaching and return as well as emergency stop function Note: The machine is 100% compatible with all Rausch broaching machines of the RS 3, RS 4 and RS 6 series in the same performance class available on the market. All fixtures, tools or broach holders can be used without restriction. General The twin-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm (from 16 mm slotting tools only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools to produce keyways. Thanks to the universally designed pull bridge and machine table, both profile and flat broaching tools can be used. Profile broaching is possible without the use of additional draw heads, using simple centering bushes. Broaching tools and holders suitable for the machine are available on request.