Birka Composites S.l.
Birka Composites S.l. iz Zuera, Zaragoza
Empresa dedicada a la fabricación de materiales compuestos.
G. Juan Alarcón
C/ Guttemberg nº 21
50800 Zuera, Zaragoza
Španija
Trenutne ponudbe podobnih prodajalcev
Mali oglas
Nemčija
653 km
EngelES650H/200W-200HL-2F
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g,
Mali oglas
Nemčija
653 km
DEMAG ET250/630-840 Concept
DEMAGET250/630-840 Concept
DEMAGET250/630-840 Concept
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine.
• Locking force: 2,750 kN
• Tie bar spacing (H x V): 630 x 630 mm
• Platen dimensions (H x V): 950 x 950 mm
• Mould height: 330–830 mm
• Opening stroke: 675 mm
• Max. daylight (distance between platens): 1,505 mm
• Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg)
• Ejector:
• Stroke: 200 mm
• Force: 80 kN
• Centring ring diameter: 200 mm
• Pneumatic ejector: yes
• Core pulls: 2 on moving side (AS)
• Injection unit:
• Unit size: 840
• L/D: 20
• Shot volume: 636 cm³
• Injection pressure: 1,351 bar
• Plasticising rate (PS): 74 g/s
• Screw speed: 326 rpm
Psdsyfq Aljpfx Adyegg
• Nozzle radius: 15 mm; nozzle orifice: 3 mm
• Max. dosing stroke: 225 mm
• Note: Second injection unit listed without data → single-component machine
• Interfaces/controls:
• Printer interface: yes
• Process control/SPC: yes
Additional equipment
• Robot/handling: Wittmann W633-961 linear robot
• Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm
• Hot runner control: 9 zones
• Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system
• Needle shut-off control: hydraulic (not equipped for pneumatic)
Mali oglas
Bielany Wrocławskie
564 km
Stroj za brizganje
KraussMaffeiKM 125-520 C2
KraussMaffeiKM 125-520 C2
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.250 kN, premer vijaka: 45 mm, delovna prostornina: 275 cm³, tlak vbrizgavanja: 1.878 letvica, injekcijska masa: 250 g, minimalna višina orodja: 300 mm, Krauss Maffei 125-520 C2
Splošne informacije
Model: 125-520 C2
Leto proizvodnje: 2004
Krmiljenje: MC4
Teža stroja: 6000 kg
Dimenzije (d × š × v): 4,5 × 1,5 × 2,2 m
Zaporni sistem
Zapiralna sila: 125 t
Sistem zapiranja orodja: 125 / …
Dimenzije plošč orodja: 745 × 770 mm
Razmak med stebri: 470 × 470 mm
Pgjdpfx Adsyfntueyeg
Odpiralna pot: 600 mm
Maksimalna razdalja med ploščama: 900 mm
Višina orodja: 300 mm
Izmetalna sila: 22 kN
Hod izmetalca: 150 mm
Vbrizgalna enota
Vbrizgalna enota: … / 520
Premer polža: 45 mm
Razmerje L/D polža: 20
Prostornina vbrizga: 275 ccm
Masa vbrizga: 250 g
Specifičen pritisk vbrizga: 1878 bar
Mali oglas
Bielany Wrocławskie
564 km
Stroj za brizganje
ENGELVictory 1350/200 + Robot
ENGELVictory 1350/200 + Robot
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 618 cm³, tlak vbrizgavanja: 2.183 letvica, injekcijska masa: 562 g, minimalna višina orodja: 400 mm, hod izmetalca: 180 mm, Engel VC 1350/200 Tech
Zapiralna sila: 200 ton
Leto izdelave: 2007
Teža: 14.200 kg
Dimenzije (d x š x v): 6,3 x 1,9 x 2,3 m
Vbrizgalna enota: .../1350
Premer polža: 55 mm
Vbrizgalni volumen: 618 cm³
Vbrizgalna teža (za PS): 562 g
Specifičen pritisk vbrizga: 2183 bar
Sistem zapiranja orodja: 200/...
Dimenzije orodnih plošč: 860 x 570 mm
Montažna višina orodja: 400 mm
Odpiralna pot: 750 mm
Maksimalna razdalja med ploščama: 1150 mm
Pedeyfnpvjpfx Adyjgg
Izmetna pot: 180 mm
Izmetalna sila: 80 kN
Oprema:
- 2 × hidravlični jedri na gibljivi plošči
- Pnevmatski ventil
- 8 področij vročih kanalov
- 8-conski rotameter
Mali oglas
Bielany Wrocławskie
564 km
Stroj za brizganje
KraussMaffeiKM 130-1000 CX
KraussMaffeiKM 130-1000 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, vpenjalna sila: 1.300 kN, premer vijaka: 55 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, injekcijska masa: 479 g, minimalna višina orodja: 300 mm, Zapiralna sila: 130 t
Leto izdelave: 2008
Teža vbrizga: 475,9 g
Vbrizgalna enota 1000
Psdpfx Adoyfnghsyogg
Premer polža: 55 mm
Specifičen tlak vbrizga: 1904 bar
Volumen vbrizga: 523 ccm
Teža vbrizga: 475,9 g
Zapiralna sila: 130 t
Dimenzije orodnih plošč: 745 x 745 mm
Razmak med stebri: 470 x 470 mm
Izmetalna sila: 22,6 kN
Višina orodja: 300 mm
Odpiralna pot: 600 mm
Maksimalna razdalja plošč: 900 mm
Teža: 8000 kg
Leto izdelave: 2008
Krmiljenje: MC5
Oprema:
- akumulator
- priključek euromap 67
- 2x pnevmatski ventil
- hidravlično jedro na premični plošči
Mali oglas
Trenčianske Stankovce
375 km
Krauss Maffei KM 150-700C2 (2003)
Krauss MaffeiKM 150-700C2
Krauss MaffeiKM 150-700C2
Klic
Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 1.500 kN, Oprema: dokumentacija / priročnik, Brizgalni stroj KM 150-700/C2
Enota za zapiranje
1. Zapiralna sila: 1500 kN
Psdpeyfm Ahsfx Adyegg
2. Velikost plošče (š × v): 780 × 790 mm
3. Odpiranje kalupa: 600 mm
4. Razdalja med vodili (š × v): 500 × 500 mm
5. Minimalna vgradna višina orodja: 300 mm
6. Izmetni hod: 150 mm
7. Vroči kanal – število uporabljenih con: 12
8. Upravljanje pnevmatskih ventilnih zatičev: 1 kos
Brizgalna enota
1. Premer polža: 45 mm
2. Vbrizgalni tlak: 2336 bar
3. Največja količina vbrizga: 305 cm³
4. Največja masa vbrizga (PS): 278 g
5. Jedra: 2× hidravlični krog (BAP)
6. Polž - razmerje L/D: 22
Mali oglas
Trenčianske Stankovce
375 km
Arburg 570E 2000-800 (2019)
Arburg570E 2000-800
Arburg570E 2000-800
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 2.000 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t
Pgodpfxsyfh Ulo Adyeg
Premer vijaka: 50 mm
Razdalja med stebri V: 570 mm
Razdalja med stebri H: 570 mm
Tip: Horizontalen
Pogon: Električni
Delovne ure: 34.535
Mali oglas
Trenčianske Stankovce
375 km
Arburg 720S 3000-1300 (2020)
Arburg720S 3000-1300
Arburg720S 3000-1300
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 300 kN, Vpenjalna sila: 300 t
Premer vijaka: 60 mm
Razdalja med stebri V: 720 mm
Razdalja med stebri H: 720 mm
Tip: Horizontalen
Pjdpfxoyfh Rme Adysgg
Pogon: Hibridni
Mali oglas
Heilbronn
548 km
Stroj za brizganje
ARBURGA 1500 T (S&P 3786)
ARBURGA 1500 T (S&P 3786)
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, ARBURG A 1500 T 1600-400 rotacijska miza (29.279 h) (S&P 3786)
Pgodeyff S Uepfx Adyeg
Leto izdelave: 2014
Obratovalne ure: 29.379 ur
Polž: 35 mm
Tlak brizganja: 2500 bar
Vsebina brizganja: 154 cm³
Zapiralna sila: 150 t
Razdalja med vodili: 1500 mm
Minimalna višina orodja: 400 mm
Maksimalna razdalja plošč: 700 mm
Mere: 4600 x 1900 x 2300 mm
Teža: 11.000 kg
Priključna moč: 22 kW
Premer mize: 1500 mm, 2-postajna (180°) rotacijska miza, 4-kratni izvlek jedra, izpihovalna naprava, vmesnik za barvalno napravo, vmesnik HHG itd...
Cena: na zahtevo
Kontaktna oseba: g. Ralf Schulz
Mali oglas
Heilbronn
548 km
Stroj za brizganje
ARBURGA 520 A (S&P 3788)
ARBURGA 520 A (S&P 3788)
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) vklj. robot KUKA (S&P 3788)
Leto izdelave: 2008
Obratovalne ure: 36.061 ur
Polž: 40 HVF mm
Vbrizgalni tlak: 2000 bar
Vbrizgalni volumen: 201 cm³
Zapiralna sila: 150 t
Pgedsyff S Ijpfx Adyjg
Razdalja med vodili: 520 x 520 mm
Minimalna vgradna višina orodja: 250 mm
Maks. razdalja med ploščama: 1000 mm
Mere: 5100 x 1600 x 2700 mm
Teža: 7.250 kg
Priključna moč: 60 kW
Hidravlični akumulator, 4 x izvlek jedra, HHG vmesnik EM67, izpihovalna naprava, vključuje robotski sistem KUKA KR 5 arc, transportni trak, varnostna ograja
Cena: po povpraševanju
Kontaktna oseba: G. Ralf Schulz
Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 160 - 750 CX
KraussMaffeiKM 160 - 750 CX
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 58.670 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, Clamping force: 1600 kN
Max. mold opening force: 87 kN
Moving platen opening force: 45 kN
Moving platen closing force: 38 kN
Mounting platen (H x V): 820 x 845 mm
Clearance between tie bars (H x V): 520 x 520 mm
Pedpfoydp Idex Adysgg
Mold opening stroke: 650 mm
Min. mold installation height: 300 mm
Max. daylight: 950 mm
Ejector stroke: 150 mm
Ejector force fwd./rev.: 23 kN
Injection unit:
Screw diameter: 45 mm
L/D ratio: 22.4
Injection pressure: 2336 bar
Shot volume: 318 ccm
Shot weight (PS): 289 g
Injection flow: 143 ccm/s
Screw speed: 265 rpm
Plasticizing rate: 29.3 g/s
Nozzle contact force: 50 kN
Electrohydraulic equipment:
Rated pump motor power: 22 kW
Installed heating power: 16 kW
Cylinder heater control zones: 5
Oil capacity: 489 ltr.
Dimensions and weight:
Space requirement approx.: 5.00 x 2.00 x 2.20 m
Total weight: 6600 kg
Max. mold weight: 1862 kg
Accessories:
- Vibration isolators
- Krauss Maffei Robot LR 100
X: 550 mm
Y: 1200 mm
Z: 1500 mm
C: 0 – 90°
Additional equipment:
- 1 x air valve
- 2 x hydraulic core pulls
- 6 x hot runner control zones
- Robot interface according to Euromap 67
Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 160 - 750 CX
KraussMaffeiKM 160 - 750 CX
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 68.590 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN
Max. Tool Opening Force: 87 kN
Movable Platen Opening Force: 45 kN
Movable Platen Closing Force: 38 kN
Clamping Plate (H x V): 820 x 845 mm
Clear Distance (H x V): 520 x 520 mm
Mould Opening Stroke: 650 mm
Min. Mould Installation Height: 300 mm
Maximum Opening Width: 950 mm
Ejector Stroke: 150 mm
Ejector Force Forward/Return: 23 kN
Injection Unit:
Screw Diameter: 50 mm
L/D Ratio: 20
Injection Pressure: 1892 bar
Shot Volume: 393 ccm
Shot Weight (PS): 358 g
Injection Flow Rate: 177 ccm/s
Screw Speed: 265 rpm
Plasticizing Rate: 36.2 g/s
Nozzle Contact Force: 50 kN
Electrohydraulic Equipment:
Pump Motor Rated Power: 22 kW
Installed Heating Capacity: 16 kW
Cylinder Heating Control Zones: 5
Oil Capacity: 489 l
Dimensions and Weights:
Space Requirement approx.: 5.50 x 2.00 x 2.20 m
Total Weight: 6600 kg
Max. Mould Weight: 1862 kg
Accessories:
- Oscillation elements
- Krauss Maffei Robot LR 100
X: 550 mm
Y: 1200 mm
Z: 2500 mm
C: 0-90°
Additional Equipment:
- 1x air valve
Pgedpfx Ajydp D Eodyjg
- 2x core pull
- Robot interface according to Euromap 67
Mali oglas
Nemčija
653 km
Arburg 820 S 4000 - 2100
Arburg820 S 4000 - 2100
Arburg820 S 4000 - 2100
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine.
Clamping Unit
• Locking force (max.): 150 kN
• Opening force (max.): 100 kN / reinforced: 800 kN
• Maximum opening stroke: 700 mm
• Minimum mold height: 350 mm
• Distance between platen faces (max.): 1050-1550 mm
• Clear tie bar spacing: 820 × 820 mm
• Mounting platen dimensions (W × H): 1171 × 1171 mm
• Maximum mold half weight: 4500 kg
• Maximum ejection force: 100 kN
• Maximum ejector stroke: 250 mm
Hydraulics / Drive / Miscellaneous
• Hydraulic pump drive power: 55 kW
• Total installed power:
– 4000-2100: 88.9 kW
– 4000-3200: 96.2 kW
• Color: Plastic-coated frame (light gray / mint green / rapeseed yellow)
• Control cabinets: Safety standard DIN EN 60204
• Socket combination: 1 Schuko + 1 Cekon
• Power supply of injection unit: 1 × 16 A
Injection Unit
• Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18
• Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70
• Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036
• Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477
• Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530
• Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440
• Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528
• Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50
• Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28
• Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247
• Nozzle contact force (max.): 110 kN
• Nozzle stroke (max.): 600 mm
• Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300
• Installed nozzle heater: 1000 W | 1250 W
Podpfx Aoydpvbjdyjgg
Dimensions and Weights (Base Machine)
• Clearance length: 490 mm
• Electrical connection (fuse) motor + heater: 250 A
• Electrical connection (fuse) motor: 125 A
• Electrical connection (fuse) heater: 50 / 63 A
Additional Equipment
• SEPRO SR AXESS 30 S3 Robot (2008)
Mali oglas
Poljska
653 km
Krauss Maffei 420-3000 CX
KraussMaffei420-3000 CX
KraussMaffei420-3000 CX
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, injekcijska masa: 1.464 g, skupna višina: 2.500 mm, skupna masa: 25.500 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, največja dolžina izdelka: 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection molding machine from Germany features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1200 cycles/h, it is ideal for high-volume production. Contact us for further information about this machine.
• Electrical Data:
• Power supply: 400 V / 3N~ / 50 Hz
• Installed heating capacity: 36 kW
• Rated power of pump motor: 75 kW
• Number of barrel heating zones: 7
• Performance and Control:
• Dry cycles (Euromap 6): 1,200 cycles/h
• Control system/version: MC5 3.3
• Machine color: grey / white / blue
Pgodpfx Adjydnp Hoyeg
• Clamping Unit:
• Mold opening force: 249.6 kN
• Tie bar distance: 800 × 800 mm
• Moving platen force (open/close): 124.7 / 102.4 kN
• Platen size: 1270 × 1200 mm
• Mold opening stroke: 1020 mm
• Minimum mold height: 380 mm
• Ejector stroke: 250 mm
• Moving platen opening stroke: 1400 mm
• Injection Unit:
• Nozzle tip radius: 15 mm
• Nozzle orifice diameter: 6 mm
• Injection pressure: 1856 bar
• Injection volume: 1608 cm³
• Injection rate: 478 cm³/s
Mali oglas
Poljska
653 km
Toyo Si-350-6S JH750E-PAKET
ToyoSi-350-6S JH750E-PACK
ToyoSi-350-6S JH750E-PACK
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, vpenjalna sila: 3.430 kN, premer vijaka: 60 mm, skupna višina: 2.397 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 8.073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It offers a clamping force of 3,430 kN, a screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8,073 × 1,930 × 2,397 mm, it is a robust choice for precision blank pressing. Contact us for further information about this machine.
• Installed heating capacity: 27.5 kW
• Total installed power: 85.6 kW
Pgsdpfx Aeydnbpsdyog
• Control system: SYSTEM 800
• Interfaces: Euromap 67, Euromap 73
Clamping Unit:
• Tie bar distance: 810 × 810 mm
• Platen dimensions: 1,050 × 1,050 mm
• Opening stroke: 700 mm
• Mold height (min / max): 300 / 770 mm
• Ejector stroke: 150 mm
• Ejector force: 60.0 kN
Injection Unit:
• Injection speed: 300 mm/s
• Injection pressure: 220 MPa
• Holding pressure: 200 MPa
• Theoretical shot volume: 763 cm³
• Injection rate: 848 cm³/s
• PS injection capacity: 210 kg/h
• Screw speed: 0–350 rpm
• Injection stroke: 270 mm
• Nozzle contact force: 39.0 kN
Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 350 - 1900 C1
KraussMaffeiKM 350 - 1900 C1
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 65.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.500 kN, premer vijaka: 70 mm, delovna prostornina: 1.047 cm³, Clamping force: 3500 kN
Maximum mold opening force: 220 kN
Moving platen drive force - opening: 105 kN
Moving platen drive force - closing: 95 kN
Clamping plate (W x H): 1100 x 1095 mm
Clear distance (W x H): 710 x 710 mm
Mold opening stroke: 920 mm
Minimum mold installation height: 380 mm
Opening width: 1300 mm
Ejector stroke: 250 mm
Ejector force forward/backward: 95 kN
Injection Unit:
Pgsdpeydmkcofx Adysg
Screw diameter: 70 mm
Ls/D ratio: 20
Injection pressure: 1778 bar
Stroke volume: 1047 ccm
Shot weight (PS): 953 g
Injection flow: 527 ccm/s
Screw speed: 285 rpm
Plasticizing rate: 95 g/s
Nozzle contact force: 110 kN
Electrohydraulic Equipment:
Rated pump motor power: 75 kW
Installed heating power: 30 kW
Barrel heating control zones: 6
Oil capacity: 720 liters
Dimensions & weights:
Space requirement approx.: 6.50 x 2.20 x 2.40 m
Total weight: 15,370 kg
Max. mold weight: 4,780 kg
Accessories:
- Anti-vibration elements
Additional equipment:
- 1 x hydraulic core pull
- 1 x air valve
- Robot interface as per Euromap 12
Mali oglas
Wrocław
566 km
Stroj za brizganje
Krauss MaffeiKM 420-3000 CX
Krauss MaffeiKM 420-3000 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX
Year of manufacture: 2011
Control system: MC5
Clamping unit:
Clamping force: 4200 kN
Tie bar clearance (h x v): 900 x 800 mm
Mounting platen dimensions (h x v): 1400 x 1250 mm
Min. mould height: 780 mm
Maximum daylight between platens: 1400 mm
Ejector stroke: 250 mm
Ejector force (forward/back): 95.4 / 48.6 kN
Max. mould weight: 6700 kg
Injection unit:
Screw diameter: 80 mm
Podeydbbvspfx Adyogg
Injection pressure: 1856 bar
Injection volume: 1608 cm³
Shot weight (PS): 1464 g
Injection rate: 478 cm³/s
Screw speed: 220 / 285 rpm
Nozzle contact force: 129.4 kN
Additional equipment:
2 x hydraulic nozzle control (GK)
2 x hydraulic core pull control – moving platen
1 x hydraulic core pull control – fixed platen
Masterbatch dosing unit control
14 GK zones
Electrical and general data:
Pump motor power: 75 kW
Installed heating power: 36 kW
Power supply: 400 V / 50 Hz
Oil quantity: 1075 l
Machine weight: 23.7 t
Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m
Klik
Hammelburg
583 km
Stroj za brizganje plastike
Wittmann BattenfeldEcoPower 180/750 Unilog B8
Wittmann BattenfeldEcoPower 180/750 Unilog B8
Stanje: rabljeno, Leto izdelave: 2017, Serial no. 141342-100, control unit Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould size 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, injection/metering unit manufactured by Wittmann, type Feedmax S3-NET, yr. 2021, sprue picker/robot by Wittmann, type WP80, yr. 2020, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564
Pgjdpfxjyc Symj Adysg
This item is part of an online auction.
The sale is subject to the approval of the seller.
Klik
Hammelburg
583 km
Stroj za brizganje plastike
Wittmann BattenfeldEcoPower 180/750 Unilog B8
Wittmann BattenfeldEcoPower 180/750 Unilog B8
Stanje: rabljeno, Leto izdelave: 2017, Ser.-No. 140228-100, control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle movement/force 350 mm/40 kN, injection/dosing unit, manufacturer Wittmann, type Feedmax S3-NET, year of manufacture 2017, sprue picker/robot, manufacturer Wittmann, type WP80, year of manufacture 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel, manufacturer Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844
Pedpfx Asyc Staedyegg
This item is part of an online auction.
Acceptance of the bid is subject to the approval of the seller.
Klik
Hammelburg
583 km
Stroj za brizganje plastike
Wittmann BattenfeldEcoPower 110/350 Unilog B8
Wittmann BattenfeldEcoPower 110/350 Unilog B8
Stanje: rabljeno, Leto izdelave: 2017, Serial No. 138524-100, control system type Unilog B8, clamping force 1,100 kN, clear tie bar spacing 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, min. mould dimensions 296 x 296 mm, injection unit type 350, screw diameter 25 mm, screw stroke 175 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 85.9 - 220 cm³, specific injection pressure 1,595 - 3,000 bar, max. screw speed 350 rpm, screw torque 340 - 500 Nm, nozzle stroke/force 250 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2018, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, L 25 m, machine weight 4,800 kg, operating hours 42,853
This item is part of an online auction.
Award will be made subject to the seller's approval.
Pgsdsyc Sqxepfx Adyjg
Klik
Hammelburg
583 km
Stroj za brizganje plastike
Wittmann BattenfeldEcoPower 110/750 Unilog B8
Wittmann BattenfeldEcoPower 110/750 Unilog B8
Stanje: rabljeno, Leto izdelave: 2017, Ser.-No. 138522-100, Control unit: Unilog B8, Clamping force: 1,100 kN, Tie bar spacing (clear distance): 470 x 420 mm, Mold height (installation): 200 - 450 mm, Opening stroke: 380 mm, Max. platen daylight: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Max. mold weight: 1,000 kg, Min. mold dimensions: 296 x 296 mm, Injection unit: Type 750, Screw diameter: 35 mm, Screw stroke: 200 - 225 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Max. screw speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/force: 350 mm/40 kN, Dosing unit: Manufacturer Movacolor, Injection/Dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, year 2021, Sprue picker/robot: Manufacturer Wittmann, Type WP80, year 2021, Travel axes X/Y/Z: 100 x 550 mm x 90°, Pneumatic hose reel: Manufacturer Metabo, Type SA250, L 25 m, Machine weight: 5,200 kg, Operating hours: 36,180
Podpeyc Snksfx Adyjgg
This item is part of an online auction.
Awarding is subject to the consent of the client.
Klik
Hammelburg
583 km
Stroj za brizganje plastike
Wittmann BattenfeldEcoPower 180/750 Unilog B8
Wittmann BattenfeldEcoPower 180/750 Unilog B8
Stanje: rabljeno, Leto izdelave: 2017, Ser. no. 138264-100, Control system type Unilog B8, clamping force 1,800 kN, clear tie bar distance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, hydraulic/electric ejector stroke 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit manufacturer Movacolor, injection/dosing unit manufacturer Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot manufacturer Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel manufacturer Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038
Psdpeyc Sh Dofx Adysgg
This item is part of an online auction.
Sale is subject to the approval of the client.
Mali oglas
Hannover
791 km
Stroj za brizganje
EngelVC 750 / 220 Spex
EngelVC 750 / 220 Spex
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale.
Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards.
We have been a wholesaler of used injection moulding machines for over 25 years.
Important Update - Tax Advice and Benefit for Used Machines:
From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine.
Keyword: Growth booster, (§ 7 paragraph 2 EStG-E)
Manufacturer: Engel
Type: VC 750 / 220
Control: CC200
Year of manufacture: 2014
Machine No.: 194413
Operating hours: 43,500 h
Injection unit
Screw diameter: 55 mm
Injection volume: 475 ccm
Shot weight: 430 g
Heating capacity: 13.4 kW
Heating zones: 5
Nozzle stroke: 350 mm
Pedpfeyc Ewxox Adyegg
Injection pressure: 1179 bar – 1578 bar (boosted)
Clamping unit
Clamping force: 220 t / 2,200 kN
Opening stroke: 757 mm
Max. daylight: 1,050 mm
Min. mould installation height: 300 mm
Ejector stroke: 180 mm
Ejector force: 80 kN
Weight: 12,740 kg
Extras:
Core pull
The machine is in very good condition and can be inspected under power.
Any peripheral devices shown are NOT included in the offer!
The machine is available immediately.
Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs.
For your information regarding the machines we offer and our company:
- We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse
- All machines offered are inspected and tested prior to removal
- We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties.
- All machines offered originate from successful companies where maintenance and care are self-evident
- All offered machines can be inspected at our warehouse
Mali oglas
Trenčianske Stankovce
375 km
Arburg 420c 1000-290 (2010)
Arburg420c 1000-290
Arburg420c 1000-290
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 100 t
Premer vijaka: 35 mm
Razdalja med stebri (spredaj): 420 mm
Razdalja med stebri (zadaj): 420 mm
Prostornina izstrela: 144 cm3
Tip: Horizontalni
Pogon: Hidravlični
Delovne ure: 46000
Podpfx Aoycvw Aedysgg
Mali oglas
Łódź
706 km
Stroj za brizganje
Arburg820S 4000-2100/400
Arburg820S 4000-2100/400
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode
Year of manufacture: 09.2012
Injection Unit:
Screw diameter: 60 mm
Shot weight: 723 g
Injection pressure: 2500 bar
Dosage volume: 792 ccm
Clamping Unit:
Clamping force: 400 t
Tie bar distance: 820x820 mm
Platen size: 1171x1171 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: SELOGICA - touchscreen
Additional Equipment:
2K injection molding machine with rotary table and robot
Pgedpfx Adeyctzfoysg
Very good technical condition
Operating hours: 42,014 h in automatic mode
Euromap 67
Robot interface
Air valve x 6
Hydraulic core pull, needle type, proportional valve controlled x 4 pairs
Hot runner control x 24
Reinforced injection units – bimetallic
Proportional valve on vertical injection unit – precise injection
Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation)
Parallel movements
Automatic mold height adjustment
Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS
Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement
Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter
Rotary table diameter: 1200 mm
Rotary table available at additional cost
Sepro Industrial Robot SR S5-35 S3 Trans
Year of manufacture: 2012
3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic)
Travel strokes approx.: X-5000, Y-1400, Z-2000
Automatic axis lubrication
Touch control panel
Robot safety package
Robot with adapter and protective housing
Robot available at additional cost
Dimensions:
Weight: 21,000 kg
Length/width/height: 8.00x2.32x4.21 m
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź.
Price: On request



















































































































































































