Murano LTD

Leto izdelave: 2019, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Znamka: LEWA Bedpsxq Eq Tofx Abxjww Model: LDE3 triplex izvozna črpalka Letnik: Nerabljena, 2019 Serijska številka: 638482-020-001 Kapaciteta (kW): 7,5 Blagovna znamka motorja: ABB Dimenzije D x Š x V (mm): 1900 x 1570 x 2000 Teža (kg) pribl.: 1160 Število na zalogi: 1 Kapaciteta (m3): 1200 l/min Maks. delovni tlak (Bar): 27,67 Proizvedeno v: Nemčiji Komentar: Nova / nerabljena naprava, takoj na voljo, več informacij na zahtevo.

Leto izdelave: 2019, Stanje: novo, Znamka: LEWA Model: G3G Triplex izvozna črpalka Leto izdelave: Nerabljena, 2019 Serijska številka: 638482-010.001 Kapaciteta (kW): 55 Znamka motorja: ABB Dimenzije D׊×V (mm): 2450 x 2200 x 2730 Teža (kg) pribl.: 6120 Število kosov na zalogi: 1 Kapaciteta (m3): 8590 l/min Maks. delovni tlak (bar): 27,66 Proizvedeno v: Nemčiji Kakovost: Nova/nerabljena naprava, neposredno na voljo. Bwedpfjxq Eqyjx Abxow

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 260 kg, skupna dolžina: 1.140 mm, skupna širina: 450 mm, skupna višina: 525 mm, volumenski pretok: 14,5 m³/h, končni tlak: 2,2 letvica, moč: 4 kW (5,44 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, največja hitrost vrtenja: 1.440 obr/min, vrsta zaščite (IP koda): IP56, 2 units of horizontal, radially split volute casing process pumps with radial impellers, single entry, single stage, Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flush connection and flow meter Bjdpoxp Eqkjfx Abxsww Impeller diameter: 260 mm Pump speed: 1,440 rpm Please note: The parameters listed on the nameplate refer to the last operating conditions, not to the pump's best efficiency point!!! Best efficiency point according to characteristic curve: Flow rate: 14.5 m³/hour Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Operating point according to last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 Volt Speed: 1,440 rpm Noridur 1.4593 is highly suitable for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment / sewage plants - Offshore and marine technology

Stanje: zelo dobro (rabljeno), Packo PHP 2 Pharma Process Pump The Packo PHP2 series pharma process pumps, certified to EHEDG and 3A standards, are used for the most demanding sterile applications in the pharmaceutical, biotechnology, and semiconductor industries. These pumps are designed for optimal cleanability, featuring thick, cold-rolled 316L stainless steel pump housings that are 100% pore-free and extremely smooth. The pumps are equipped with fully machined, open impellers made from material 1.4435. Thanks to the crevice-free design and final electropolishing, the PHP2 series pumps can be perfectly cleaned, making them a reliable component in your production process. Application Areas These perfectly cleanable process pumps are the ideal solution for purified water circuits, cleaning applications, etc. Typical fluids include purified water, WFI, CIP, syrups, and more. Your Benefits - High pump efficiency results in lower energy consumption - Low NPSH values: reduced risk of cavitation - Electropolished: perfectly cleanable - Simple design and maintenance: less downtime - Standardized components - Fully certified (surface roughness, FDA, USP, 3.1 for product contact parts, conformity certificate, etc.) - Suitable for SIP - Robust construction in compliance with ASME BPE guidelines Bodpfxew Hc Hmo Abxoww - Wetted parts < 0.4 µm Manufacturer: Packo Type: PHP 2/40-1857752 Q: 14 m³/h H: 59 m Weight: 91 kg More new and used items can be found in our shop! International shipping costs on request!

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: ML-348, Used Hyco ML-348 Vacuum Diaphragm Pump Bedpfx Aow Evhzebxoww Model: ML-348-D37-SA Type: p-227/1 | 207/1 | p-173/2 Voltage: 230-400 V, 50/60 Hz Multiple units in stock.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, moč: 4 kW (5,44 KM), 2 pieces of magnetically coupled centrifugal pumps made of stainless steel. Last used for handling caustic soda (sodium hydroxide solution). Manufacturer: CP Pumpen AG (Switzerland) Model: MKP 20-15-160 Design: Monoblock with baseplate Capacity: 5 m³/h (1.38 liters/second) Head / Pressure: 21.1 meters (2.1 bar) Bwsdpfx Ajwncv Robxsw Medium temperature: 35 - 40°C Impeller diameter: 153 mm Speed: 2950 rpm Casing and impeller material: 1.4581 Includes bolts and plug for connection cable Motor: Siemens Model: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency class: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Baseplate width: 330 mm Height: 360 mm Weight: 81 kg Suction side: DN 20 Discharge side: DN 15

Leto izdelave: 2013, obratovalne ure: 50 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Model #2WN137F1-H23Z-BJMVA-21/50T, Crosshead piston compressor suitable for small-molecule gases such as hydrogen or argon. Oil-free! Bwsdsv Uyqmepfx Abxsw Installed as a backup unit but never used in production, therefore in like-new condition. Current list price: €190,000 Inlet pressure: 5 psi = 34.5 kPa (0.345 bar g) Discharge pressure: 60 psi = 413 kPa (4.13 bar g) Throughput: 148 scfm = 240 Nm³/h Power requirement: 30 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, skupna dolžina: 1.590 mm, skupna širina: 780 mm, skupna višina: 600 mm, moč: 15 kW (20,39 KM), največja hitrost vrtenja: 980 obr/min, Vacuum Pump Becker VTLF 500 Used equipment, in good condition, see pictures Length: 159 cm Width: 78 cm Height: 60 cm 15 kW Suction capacity: 500 m³/h Speed: 980 rpm Negotiable price: €700,-- net ex stock Item is in stock. Transport and installation available on request. Inspection possible at any time by prior arrangement. Bwjdpfx Abjtwzvyoxow Further information available on request. Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times. (Subject to changes and errors in technical data, specifications, and prices as well as prior sale! Please see our terms and conditions. All prices excl. VAT ex stock.)

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying Bwedpsiuznusfx Abxew - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Leto izdelave: 2009, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 unit liquid ring vacuum pump. Please read the description carefully to the end!! The pump is not suitable for: Water, food industry and non-corrosive media. More cost-effective materials such as 1.4408 or 1.4571 are better suited for these media. The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently resistant to corrosion—especially when chloride-induced pitting, crevice corrosion, and stress corrosion cracking are concerns. Alloy 59 is used in environmental technology, the chemical industry (chemical processes involving oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization systems. Outstanding resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acids—particularly to mixtures of sulfuric and hydrochloric acids. Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when chloride-based catalysts are used - Multipurpose plants in the chemical industry - Plant parts in fine chemicals and pharmaceuticals industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulfurization units (FGD) in fossil-fueled power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications Bwsdpfx Aoigqutjbxew - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulfuric acid coolers - Piping in geothermal power plants - Components in flue gas desulfurization systems Manufacturer: Busch Model: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings replaced, mechanical seal refurbished by a professional company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Stanje: rabljeno, Double diaphragm pump with pneumatic drive DEPA Type DH40-FA-ZRT Air-operated diaphragm pump, twin pump Serial No.: B1802498 Year of manufacture: 09.05.2018 Maximum temperature: 130°C Size: 40 Maximum particle size: 16 mm Bwjdpfx Ajib D H Ujbxjw Suction lift: approx. 2 m Suction lift when primed: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8" Suction connection: 1 1/2" Discharge connection: 1 1/2" - self-priming - aluminium housing - diaphragm plates made of stainless steel - diaphragm made of nopped E4® PTFE composite - balls made of PTFE - ball seats made of stainless steel Required installation space (L x W x H): 370 x 270 x 450 mm Net weight: 15 kg Very good condition

Leto izdelave: 1987, Stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Bedoh S Nz Sspfx Abxoww Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 480 mm, 2 units of Horizontal, axially split volute casing process pumps with single-entry, single-stage radial impeller Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft Seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! Operating parameters shown on the nameplate reflect process conditions, not actual best-point performance! I have provided 2 characteristic curves as photos. Photo 11: Duty point Photo 12: Operating parameters from previous application Duty point (Best-Point): Flow rate: 6.9 m³/h Head: 33.0 m Shaft power: 1.73 kW Efficiency: 35.87% NPSH: 2.17 Bjdsfyn Rpjpfx Abxeww Operating data from previous application (approx.): Flow rate: 2.2 m³/h Head: 37.0 m Shaft power: 1.27 kW Efficiency: 18.07% NPSH: 1.99 Materials: Casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric Motor: 5.5 kW Energy efficiency class: IE2 Voltage: 400/690 Volt Speed: 2950 rpm Material Noridur 1.4593 is highly suitable for: - Chemical and process industry - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulfurization systems - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine engineering