enveon GmbH

Stanje: pripravljen za uporabo (rabljen), Zwick Roell Z030 naprava za natezne preizkusevanje Preizkusna sila: 30 kN Poraba: 2,3 kVA Cgodpfx Asy Nilzshxot Preizkusni prostor: spodnji preizkusni prostor: višina 1355 mm zgornji preizkusni prostor: višina 1380 mm Širina: 440 mm Vabljeni na ogled naprave. Po želji lahko za vas organiziramo ugoden prevoz! Prejeli boste uradni račun. Za tuje stranke je možna izdaja računa brez DDV. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo spletno trgovino in si oglejte tudi ostale ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov ter služijo zgolj za identifikacijo in opis izdelkov. Pridržujemo si pravico do sprememb tehničnih podatkov ter napak v opisu izdelka.

Stanje: zelo dobro (rabljeno), Binder temperature test chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclical temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in the range of -40 °C to +180 °C and offers an efficient alternative to custom-tailored solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x cable ports Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Cgodpfx Ajy Nic Hehxjt Electrical data: Nominal voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following checks and procedures are carried out on all our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented trial run. Condition: Used Scope of delivery: Delivery contents as shown in the images Inspection possible by appointment. Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Stanje: zelo dobro (rabljeno), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale: Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are especially suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature tests in a range from -40°C to +180°C, providing an efficient alternative to custom-built solutions. Technical Specifications: Temperature range: -40°C to +180°C Test chamber volume: approx. 228 liters Temperature Performance Data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cgsdpfey Nicmex Ahxst Cooling rate: approx. 4.5 K/min Cool-down time from +180°C to -40°C: approx. 110 minutes Test Chamber: Internal dimensions: Approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: Approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x cable ports, Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of Delivery: Scope of delivery as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sale without warranty. (Subject to technical changes and errors)

Stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber Model: WT3-600/70/5 Manufacturer: Weiss Umwelttechnik For sale is a high-quality Weiss WT3-600/70/5 temperature test chamber, suitable for professional temperature testing in industrial applications, research, development, and quality assurance. The unit features a modern S!MCON / 32 controller with touch panel for convenient operation and programming of test sequences. This chamber is water-cooled and designed for demanding temperature tests within a range of -70°C to +180°C. Features: - S!MCON / 32 controller - Control unit with touch panel - Adjustable leveling feet - Cable ports left and right - R1 port, nominal width 125 mm - L1 port, nominal width 50 mm - Test chamber lighting - Water-cooled design Technical Data: - Temperature range: -70°C to +180°C - Test chamber volume: approx. 600 liters - Internal dimensions: approx. 800 x 950 x 800 mm (W x H x D) Temperature Performance Data: - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K - Heating rate: approx. 7.5 K/min - Cooling rate: approx. 7.5 K/min - Heat compensation: max. 2500 W Electrical Data: - Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: approx. 23 A - Rated power: approx. 13 kW - Fuse protection: 16 A slow-blow Refrigerants: - R404A / R23 Dimensions: With hinges and door lock: approx. 1090 x 1995 x 1660 mm (W x H x D) Without hinges and door lock: approx. 1000 x 1995 x 1660 mm (W x H x D) Weight: - approx. 620 kg Sound Pressure Level: Cgsdpfx Aoy Nibpehxet - approx. 58 dB(A) Condition: - Used Scope of Delivery: - As shown in the photos Inspection possible by appointment. Loading can be organized. Sale without warranty. (Subject to change and errors excepted)

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Version: water-cooled For sale is a CTS climate test chamber for temperature and climatic testing in industry, research, development, and quality assurance. Condition / Display: Used device, visual condition as shown in the pictures. Display in manual operation / stop. Current temperature: 16.59 °C Cjdpfx Ajy I Tdxjhxegt Set temperature: 5.00 °C Current humidity: 39.7% rH Water reservoir: 11.0 l Special features: Extended temperature range up to +210 °C (many standard models only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerants: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on configuration) Features: Viewing window Stainless steel test chamber Digital display for set/actual values Test item protection / temperature limiter DI water connection Condensate drain Cable ports RS232 interface Digital outputs for test item control Scope of delivery: CTS climate test chamber C-70/600 Scope of delivery as pictured Service / Preparation: Function check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection by appointment possible Loading can be organized Commercial sale – Sold without warranty. (Misprints and errors excepted)

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber Model: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for thermal cycling and shock testing in industrial, research, and development settings. Technical Data: Test chamber volume: approx. 32 liters Maximum specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature transition rate: up to approx. 100 K/min Transition time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Nominal power: approx. 9.7 kW Nominal current: approx. 15.4 A Fusing: 16 A slow-blow Protection class: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: Approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: Approx. 650 kg Cjdpfoy I Ntcjx Ahxjgt Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male thread Equipment: Two-chamber system (hot / cold chamber) Digital CTS controller Display / control panel Program operation Operating hours counter Viewing window Internal lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick instruction available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as shown in the pictures Scope of delivery as depicted Inspection by appointment is possible. Loading can be arranged. Commercial sale. Sale without warranty. (Subject to changes and errors)

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Prostornina preizkusnega prostora: 190 l, temperaturno območje: -70°C/180°C, temperaturna konstantnost: +/-0,5K, dimenzije preizkusnega prostora X/Y/Z: cca 580mm/450mm/750mm, dimenzije stroja X/Y/Z: cca 800mm/1300mm/1800mm, teža: cca 550kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Cedpoy I Ackofx Ahxegt

Leto izdelave: 2019, obratovalne ure: 3.577 h, stanje: zelo dobro (rabljeno), Weiss Climate Test Chamber ClimeEvent C/1000/70/5 Type: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of manufacture: 2019 Version: water-cooled Operating hours: approx. 3577 h Cedpfxey Iyx As Ahxsgt For sale is a Weiss ClimeEvent climate test chamber with a 1000-liter test space. Suitable for temperature and climate testing in industrial, automotive, electronics as well as research and development applications. Temperature and climate data: Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10% to 98% relative humidity Test chamber: Volume: approx. 1000 liters Internal dimensions: approx. 950 x 1100 x 950 mm Dimensions: External dimensions: approx. 2000 x 1415 x 2030 mm Electrical data: Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A R23 Weight: approx. 1300 kg Applications: Temperature tests Climatic tests with humidity Thermal cycling tests Endurance tests Condition: Used Unit was last in operation Scope of delivery: Weiss ClimeEvent C/1000/70/5 Accessories as shown in pictures Inspection possible by appointment. Loading can be organized. Sale without warranty. (Subject to modifications)

Stanje: zelo dobro (rabljeno), Vötsch Thermal Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a Vötsch thermal shock test chamber in a two-zone configuration for rapid temperature cycling tests. Suitable for use in industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: - Hot chamber: +50 °C to +220 °C - Cold chamber: -80 °C to +70 °C Temperature Data: Cgsdsy Iyuwspfx Ahxet - Temporal temperature deviation: ±1 K - Spatial temperature deviation: ±2 K - Heating rate (hot chamber): approx. 11 K/min - Heating rate (cold chamber): approx. 2 K/min - Cooling rate: approx. 3 K/min Test Space: - Volume: approx. 125 liters - Internal dimensions: approx. 470 x 650 x 410 mm - Cable port: Ø 67 mm Electrical Data: - Connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated power: approx. 10 kW - Rated current: approx. 25 A Refrigerants: - R404A: 2.9 kg - R23: 1.27 kg Pressure Data: - ND max.: 22.5 bar - HD max.: 25 bar Dimensions: - approx. 930 x 2115 x 1970 mm Weight: - approx. 1000 kg Equipment: - Two-chamber shock test system - Digital control - Programmable operation - Observation window - Cable port Condition: - Used - Control system overhauled and newly rewired - Control panel replaced - Spindle and spindle motor replaced - Plate heat exchanger insulated Scope of delivery: - Vötsch VT 7012 S2 thermal shock test chamber - Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Sale without warranty. (Subject to change)

Stanje: zelo dobro (rabljeno), LDS / CTS Vibration Test System Type: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and environmental testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-suspended and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Type: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial version Mains voltage: 415 V Max. power requirement: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System LDS K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerants: R452A: 9.5 kg R23: 3.7 kg Equipment Combined environmental and vibration testing Slip table / mounting table available Vibration-isolated installation Programmable operation possible Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Viewing under power possible Scope of Delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier LDS K2+ system Complete PC system Cgjdpfxjy Iwp Sj Ahxot CTS climate chamber Accessories as per pictures Loading possible. Sale without warranty. Subject to prior sale and changes.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/1000-S Equipment Data Manufacturer: CTS GmbH Model: C-70/1000-S Cgodpfx Ajy Iam Hshxst Year of manufacture: 08/2011 Serial number: 113054 Version: Climate test chamber / Environmental simulation chamber Cooling: Water cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability tests. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% relative humidity Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Program mode Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable ports Feedthroughs approx. 50 mm and 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on casters Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Notifications and digital channels Site plan Quick reference guide Humidity diagram Scope of Delivery CTS climate test chamber C-70/1000-S Documentation as available Scope of delivery as shown Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), RS Simulators Thermal Shock Chamber ST2K 1000 / 55 Device Data Manufacturer: RS Simulators Model: ST2K 1000 / 55 Design: Thermal Shock Chamber Cooling: Water-cooled Description Pre-owned thermal shock chamber for standard-compliant thermal shock tests. Suitable for material, component, and reliability testing. Designed for use in industry, automotive, research, and quality assurance. System Description - 2 separate temperature chambers (hot/cold) - Automatic horizontal test basket transfer - Rapid cycling operation for thermal shock testing Temperature Ranges - Hot chamber: +40 °C to +180 °C - Cold chamber: -70 °C to +100 °C - Temporal deviation: ±0.8 K Test Chamber - Volume: approx. 580 liters - Interior (W x H x D): approx. 1070 x 680 x 800 mm - Max. load: approx. 150 kg Cjdpoy H Igfjfx Ahxsgt Power Supply - 400 V / 3~ / N / PE / 50 Hz - Power: max. 33 kVA - Max. current: 65 A Media Connections - Cooling water: G 1", approx. 3 bar (max. 10 bar) - Cooling water requirement: max. 3.2 m³/h - Return cooling water: non-pressurized - Compressed air: NW 7.2, 4–10.5 bar Dimensions - External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight - Approx. 2800 kg Features - Horizontal basket movement - C-rails in test chamber - Large test basket (>1000 mm) - Observation window - Interior lighting - SE-604 controller - Program operation and data recording - RS232 interface Refrigeration System - Refrigerants: R449A / R23 - R449A: approx. 8.0 kg - R23: approx. 2.5 kg Operating Data - Operating hours: approx. 4,500 h - Sound level: approx. 67 dB(A) Ambient Conditions - Temperature: +12 °C to +30 °C - Humidity: 25% to 75% RH Scope of Delivery - RS Simulators Thermal Shock Chamber ST2K 1000 / 55 - Delivery as pictured Optional Pre-delivery Service - Functional test - Refrigerant service - Leak test - Test run with report Condition - Used. Condition as per photos. Note - Used equipment, sale without warranty. - Inspection by appointment possible. - Loading and transport can be organized upon request. - Subject to prior sale and changes. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), RS Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Version: Climate test chamber / environmental simulation chamber Cooling: water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature testing, climate tests, material, and ageing tests. Designed for use in industrial testing and measurement applications. Technical Data Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 litres Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight Approx. 1400 kg Equipment RS-Simulatoren control / operator panel Programmable operation Observation window Temperature monitoring in the test chamber Operating hours counter Side entry port Rugged industrial construction Scope of Delivery RS-Simulatoren climate chamber KSS 600/75-10K Scope of delivery as shown Optional pre-delivery service Cjdpfx Ajy H Ib Ajhxsgt Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sale without warranty. Inspection by appointment possible. Loading and transport can be organized upon request. Subject to prior sale and technical changes. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), Binder Climate Chamber MKFT 720 E3.2 Device Data Manufacturer: Binder Type: MKFT 720 E3.2 Year of manufacture: 2017 Article number: 9020-0288 Version: Climatic Test Chamber (Environmental Test Chamber) Cooling: Air-cooled Description Used climate chamber from Binder. Suitable for temperature, climate, material, and aging tests as well as stress testing. Intended for use in industrial applications, research, development, and quality assurance. Technical Data Temperature range: -70°C to +180°C Humidity range: 10% to 98% r.h. (relative humidity) Interior volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage cooling system Max. operating pressure: 29 bar Temperature Performance Data Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Climate Performance Data Climate range: +10°C to +95°C Humidity range: 10% to 98% r.h. Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Features Touch control panel Program and constant operation Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Robust industrial design Weight Approx. 635 kg Scope of Delivery Binder Climate Chamber MKFT 720 E3.2 Scope of delivery as shown Pre-delivery Service (optional) Functional check Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in pictures. Note Used device, sale without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to prior sale and technical changes. Cgedpey H H Smsfx Ahxjt If you have any questions, please feel free to contact us.

Stanje: dober (rabljeno), Delujoč merilnik trdote Cgsdpfsy H H Nfjx Ahxet Na željo je mogoče organizirati prevoz in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV Ogled možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Nakup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARSKIH STROJEV IN DRUGE OPREME. Potrebujete kakovosten, a cenovno ugoden stroj za svojo proizvodnjo? Ali pa ga želite prodati? Za več informacij ali možnosti stika nas kontaktirajte preko kontaktnega obrazca.

Stanje: zelo dobro (rabljeno), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40 °C to +180 °C Humidity range: 20% to 98% rH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Features Touchscreen control panel Programmable and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Interior lighting Cable port Overheat protection Hour meter Cgjdjy H H Iuspfx Ahxot Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Optional Pre-Delivery Service Functional testing Refrigerant service Leak test Test run with protocol Condition Used. Condition as per pictures. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to prior sale and changes. If you have any questions, please contact us.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Equipment Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate test chamber Cooling: water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Ideal for use in research, development, and quality assurance. Operating Condition Display: Manual operation / stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7 % RH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with protocol Condition Used. Condition as shown in photos. Note Used equipment, sale without warranty. Cgsdoy H H D Aspfx Ahxet Inspection by arrangement possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), Binder Temperature Cycling Chamber MK 115 E3.1 Device Data Manufacturer: Binder Model: MK 115 E3.1 Article number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. For use in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Equipment MCS controller with program memory Adjustable ramp functions Temperature selector limiter, Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feed-through Ø 50 mm (left) Stainless steel interior with shelf 4 casters (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Codpfx Ahsy H Hvloxsgt Rapid temperature changes (temperature cycling operation) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight Approx. 260 kg Condition Used. Visual and technical condition as shown in the pictures. Scope of Delivery Binder MK 115 Temperature Cycling Chamber Shelf / Interior fittings Note Used device, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climatic Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climatic test chamber Cooling: water-cooled Description Used climatic test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Pre-cooling compressor: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Csdpfxsy H Hmwe Ahxegt Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS Touch-/LCD control unit Program operation Sample protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refill possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Ports 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climatic Test Chamber CS-70/600-5/S Documentation / test certificates (if available) Service prior to delivery (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition as per photos. Note Used device, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. For use in industry, research, and quality assurance. Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Cjdjy H Hl Hopfx Ahxogt Cooling System Refrigerant: R404A / R23 Cascade refrigeration system Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (as far as available) Pre-delivery service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Cosmetic condition as per images. Note Used device, sale without warranty. Viewing possible by arrangement. Loading and transport can be organized on request. Specifications subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: water-cooled Description Used temperature shock test chamber from CTS. Suitable for thermal shock and cyclic temperature testing. Applications in industry, research, and quality assurance. Application Areas - Material testing - Aging tests - Electronic and component testing - Temperature shock testing - Automotive and quality assurance Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual value display - 2-zone system - Transfer basket for rapid change - Viewing window - Integrated control cabinet - Cooling water connections Technical Specifications - Separate hot and cold chambers - Stainless steel test compartment - Industrial-grade design Dimensions External: 2335 x 940 x 1820 mm Insertion opening: 1990 x 940 x 1652 mm Codpfxoy H Hk Ao Ahxsgt Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Wiring diagram and piping layout - Spare parts list Pre-shipment Service (optional) - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Optical condition as per photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (as far as available) Note Used device, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, skupna masa: 355 kg, skupna dolžina: 2.000 mm, skupna širina: 1.300 mm, skupna višina: 1.800 mm, AVIKO 60100 G3 DRY ADVANCED zaznava napake na jeklenih kroglicah s premeri od 60 do 100 mm. Sistem lahko uporabniki nadzorujejo preko PC/PLC in njegovega intuitivnega HMI, z dostopom do statistike programske opreme, protokolov, zgodovine sortiranja, video navodil in neposredne povezave s programsko opremo za nadzor stroja Precision Viewer. Vsi glavni gibljivi elementi so poganjani s stisnjenim zrakom ali električnimi motorji. Napredni model je opremljen z naprednimi vrtinčnimi sondami in vključuje instrument eddyvisor C za natančno zaznavanje razpok. Za učinkovito delovanje sta nalagalnik in izhodno držalo vključena kot standardna oprema. Cgjdpfx Ahsy H Dmbjxjt Za več podrobnosti obiščite našo spletno stran.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Der ibg Ring Tester Large wurde für die automatisierte Rissprüfung von Wälzlagerringen im Innen- und Außenbereich mit Durchmessern von 45 – 100 mm konzipiert. Das System führt zunächst eine Gefügeanalyse durch, gefolgt von einer Zeilenscan-Prüfung der Laufbahnen sowie des Innen- und Außendurchmessers, gesteuert durch den eddyvisor C. Nach der Prüfung werden die Bauteile automatisch klassifiziert und in i.O. (OK) und n.i.O. (NOK) sortiert. Die Prüfeinheit ist auf einem robusten Metallrahmen montiert, der für industrielle Produktionsumgebungen geeignet ist und über integrierte Stellflächen für die Schaltschränke zur Aufnahme der Messgeräte und der SPS (inkl. Siemens SPS) verfügt. Cgedpfx Aey H Dkaehxst Saubere, aufrecht stehende Bauteile werden vereinzelt, einem Transport-Rad zugeführt und mittels Riemen auf Rotationsgeschwindigkeit gebracht. In der Prüfstelle sorgen verstellbare Rollen für die seitliche Fixierung, während die Sonden die Oberflächen auf Defekte prüfen; anschließend erfolgt die automatische Sortierung in i.O. und n.i.O. Vor der Prüfung müssen die Ringe frei von Partikeln und tropfender Flüssigkeit sein. Das System folgt strikt dem „good-part-only“-Prinzip von ibg, während n.i.O.-Masterringe ausschließlich zur Überprüfung der Detektionsleistung in Versuchsdurchläufen eingesetzt werden. Die Einlaufhöhe beträgt 1550 mm, die Auslaufhöhe 1220 mm. Weitere Details finden Sie auf unserer Website.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Der ibg Ring Tester Small ist für die automatische Rissprüfung an Innen- und Außenringen von Wälzlagern mit dem eddyvisor C konzipiert. Sowohl die Laufbahnen als auch die Außen- und Innendurchmesser können jeweils mittels einer Linienabtastung mit ein oder zwei Sonden geprüft werden. Nach der Prüfung erfolgt die Aussortierung der Teile in OK und NOK. Das Prüfsystem ist auf einem robusten Metallgestell montiert, ideal für den Einsatz in der Produktion, und bietet Platz für die Stahlschränke mit den Prüfgeräten und der Steuerung (einschließlich Siemens SPS). Das Inspektionssystem verwendet eine oder zwei Sonden zur Linienabtastung der Laufbahnen sowie der Innen- und Außendurchmesser. Gereinigte, aufrechtstehende Teile werden vereinzelt und in ein Transportrad eingegeben, in dem sie mittels Riemenantrieb beschleunigt und rotiert werden. An der Prüfstelle sorgen verstellbare Rollen für die seitliche Fixierung, während die Sonden die Oberflächen auf Fehlstellen abtasten. Im Anschluss werden die Teile in OK und NOK sortiert. Die Ringe müssen partikelfrei und ohne tropfende Flüssigkeit sein. Die Systemeinrichtung erfolgt nach dem Good-Part-Only-Prinzip von ibg. NOK-Musterteile werden ausschließlich zur Überprüfung der Fehlererkennung im Versuch eingesetzt. Einlaufhöhe 1.350 mm, Auslaufhöhe 1.150 mm. Cgjdpfx Asy H Dghohxet Weitere Informationen finden Sie auf unserer Webseite.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, skupna masa: 240 kg, skupna dolžina: 1.213 mm, skupna širina: 804 mm, skupna višina: 1.856 mm, Le robot ibg eddyrobot est un système modulaire et semi-automatique pour la détection des fissures et de la brûlure de rectification par courants de Foucault. Doté de l'eddyvisor C et prenant en charge jusqu'à quatre sondes ET interchangeables, il offre une précision et une flexibilité de niveau industriel. Compact et mobile, il convient aux lignes de production, laboratoires ou inspections autonomes. Le système est équipé d'un verrouillage électromécanique et d'un arrêt d'urgence pour la sécurité de l'opérateur. Son interface intuitive assure une utilisation simple, tandis que l'eddyvisor C ibg intégré avec une sonde de test de fissure différentielle fournit des résultats précis et fiables (une station de sonde flexible supplémentaire permettant de stocker 4 sondes ET, avec changement automatique de sonde par robot). Un robot industriel six axes Mecademic Meca 500 avec une répétabilité de ±5 µm garantit des résultats de test constants, gérés par un automate Beckhoff. L'unité est entièrement mobile, montée sur des roues en caoutchouc de 100 mm (deux verrouillables), avec poignée et protections d’angle, et passe à travers les portes standards. Cgjdpfxey H Dfds Ahxjt Pour plus d’informations, veuillez consulter notre site web.