Dürholt-Zangen GmbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 8.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 41625, vpenjalna sila: 250 kN, premer vijaka: 28 mm, razmak između stupova: 254 mm, tlak vbrizgavanja: 1.405 letvica, injekcijska masa: 53 g, minimalna višina orodja: 200 mm, hod izmetalca: 80 mm, BOY 25 E (250-82) Year 2020 Number of operating hours: 8,600 Cylinder Ø 28 mm HWR; 53.2 g for PS; 1405 bar Clearance between tie bars: 254 mm Minimum mold height: 200 mm Maximum platen spacing: 400 mm Open nozzle R35 Optional equipment: -Ceramic heaters with insulation -Controlled temperature in the material feed zone -Air blow-off valve -Connector for ejector plate safety switch -Drive for hydraulic shut-off nozzle -Included nozzle; hydraulic shut-off nozzle with BC needle -2 heating zones for hot nozzles in the mold -Interface package, OPC UA Dsdpfx Afsyhmyroxokh The machine is exceptionally well preserved (like new); inspection is possible at our warehouse. EXW Vrhnika - You provide your own transport we load the machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm Dkodpjyg Nfuofx Afxsh • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 7.278 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 550 kN, premer vijaka: 32 mm, delovna prostornina: 96 cm³, tlak vbrizgavanja: 2.127 letvica, Dr. Boy 55 A DUROPLAST (samo 7.278 h) Leto izdelave: 2016 Obratovalne ure: 7.278 ur Vijak: 32 mm duroplast Tlak vbrizgavanja: 2.127 bar Volumen vbrizga: 96 cm³ Zapirala sila: 55 t Dksdpfoyg Ivfex Afxsh Razmak med vodili: 360 x 335 mm Minimalna vgradna višina orodja: 250 mm Maksimalna razdalja plošč: 650 mm Dimenzije: 3.200 x 1.200 x 2.000 mm Teža: 2.430 kg Priklop: 11 kW Vbrizgalna enota za duroplast granulat, enostavno krmiljenje vlečenja jedra, izpihovalna naprava, priprava za ogrevanje orodja 4-krat itd. Cena: po povpraševanju Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, ARBURG A 375 V 500-170 rotacijska brizgalka (S&P 3773) Leto izdelave: 2012 Delovne ure: 36.900 ur Polž: 25 HVF mm Tlačna sila brizganja: 2500 bar Prostornina hoda: 59 cm³ Dodpsyg Iuzsfx Afxskh Zapiralna sila: 50 t Min. višina vgradnje orodja: 170 mm Maks. razmik plošč: 520 mm Dimenzije: 3300 x 1700 x 2100 mm Teža: 3740 kg Priključek: 11 + 11 = 22 kW Vertikalna brizgalka z 900 mm rotacijsko mizo, kot vrtenja levo/desno 180°, vključno z napravami za pozicioniranje v vodoravni položaj za brizganje v razdelilno ravnino, vključno s škarjastim dvigalom in zaščitnimi ploščami, HHG EM67, zračnim ventilom, EM73, ogrevanjem orodja itd... Nova cena cca 170.000,- evrov Cena: po dogovoru Kontaktna oseba: G. Ralf Schulz

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 47.792 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 900 kN, Stock No.: 503504 Manufacturer: ENGEL Model: VICTORY 330H-80V-90 combi Control: CC200 Year of Manufacture: 2007 Operating Hours: 47,791 h The 2-component ENGEL injection moulding machine offered here is equipped with a 2-station rotary table RD 700, featuring hydraulic drive (hydraulic motor/proportional valve) and 180-degree oscillating rotation against a fixed stop. Clamping force: 900 kN Djdeygv S Ispfx Afxskh Platen size (h x v): 740 x 680 mm Minimum mould height: 243 mm Maximum platen distance: 743 mm Opening stroke: 500 mm Rotary table diameter: 700 mm Horizontal injection unit (330H): Screw diameter: 35 mm Shot volume: 154 cc Injection pressure: 1,600 bar Second vertical injection unit (80V): d = 22 mm Shot volume: 38 cc Injection pressure: 1,590 bar Equipment: - On-screen text in German - On-screen text in English - 1x hydraulic core pull - Machine with rotary table - Machine with water manifold - Machine without material hopper - Leveling elements - Interface for ejector plate safety - Schuko socket 10A - 8x tool heating circuits - Two-component injection moulding machine Machine dimensions (LxWxH): 4.5m x 1.45m x 2.7m Total weight: 9,300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 70.171 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 900 kN, premer vijaka: 38 mm, delovna prostornina: 38 cm³, tlak vbrizgavanja: 2,06 letvica, izmetalna sila: 40.000 N, hod izmetalca: 130 mm, dolžina plošče: 680 mm, širina plošče: 740 mm, skupna dolžina: 4.400 mm, skupna širina: 1.500 mm, skupna višina: 2.000 mm, skupna masa: 6.700 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, prosta razpetina: 800 mm, Oprema: dokumentacija / priročnik, Zaloga št.: 503415 Proizvajalec: ENGEL Tip: VICTORY 80-90 tech Krmiljenje: CC200 Leto izdelave: 2009 Obratovalne ure: 70171 h Dksdpfx Afoygv Sbexoh Zapiralna sila: 900 kN Velikost plošč (š x v): 740 x 680 mm Minimalna vgradna višina: 300 mm Največja razdalja med ploščama: 800 mm Odpiralna pot: 500 mm Premer polža: 22 mm Volumen hoda: 38 ccm Brizgalni tlak: 2060 bar Oprema Prikaz na zaslonu v nemščini CEE vtičnica 16A Hidravlični vlečni jedro 1x Vodno elektromagnetni ventil 2x Stroj z vodno baterijo Stroj brez materialnega lijaka Izravnalni elementi Schuko vtičnica 10A Ogrevanje orodja 4x Dimenzije stroja (DxŠxV): 4,4m x 1,5m x 2m Skupna teža: 6700 kg

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 72.154 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 25 mm, Št. zaloge: 503576 Proizvajalec: ARBURG Tip: Allrounder 900 T 800-150 Krmiljenje: Leto izdelave: 2010 Obratovalne ure: 72.154 h Zapiralna sila: 800 kN Razdalja med stebri (v x š): 900 x 900 mm Minimalna vgradna višina: 250 mm Največja razdalja med ploščama: 550 mm Odpiralna pot: 300 mm Velikost vrtljive mize: 900 mm Premer polža: 25 mm Prostornina gonila: 54 ccm Tlak vbrizgavanja: 2.500 bar Oprema: Besedilo na zaslonu v nemščini 1x zračni ventil Stroj z vrtljivo mizo Stroj z vodno baterijo Dsdsygv R Repfx Afxekh Nivlirni elementi Vmesnik BDE Dimenzije stroja D x Š x V: 3,8 m x 1,85 m x 2,15 m Skupna teža: 5.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 49.673 h, vpenjalna sila: 800 kN, premer vijaka: 35 mm, razmak između stupova: 520 mm, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2,429 letvica, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, dolžina plošče: 740 mm, širina plošče: 640 mm, vgradna višina: 300 mm, skupna dolžina: 5.350 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 6.500 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, prosta razpetina: 790 mm, Oprema: dokumentacija / priročnik, Inventarna številka: 503232 Proizvajalec: KRAUSS MAFFEI Tip: KM 80-380 EX Krmiljenje: MC5 Leto izdelave: 2008 Delovne ure: 49.673 h Zatezna sila: 800 kN Razmik vodil h x v: 520 x 420 mm Velikost plošč h x v: 640 x 740 mm Minimalna vgradna višina: 300 mm Maksimalna razdalja med ploščami: 790 mm Premer polža: 35 mm Količina hoda: 154 ccm Tlak brizganja: 2429 bar Oprema Dedpfjygv I Nsx Afxokh Besedilo na zaslonu v nemščini CEE-vtičnica 16A Zračni ventil 1x Stroj z dozirnim lijakom Stroj z vodno baterijo Izravnalni elementi Vmesnik EUROMAP 67 Vmesnik USB Schuko-vtičnica 10A Ogrevanje orodja 24x Dimenzije stroja D x Š x V: 5,35 m x 1,7 m x 2 m Skupna teža: 6.500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, vpenjalna sila: 500 kN, premer vijaka: 30 mm, razmak između stupova: 320 mm, delovna prostornina: 85 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 77 g, minimalna višina orodja: 200 mm, izmetalna sila: 30 N, hod izmetalca: 125 mm, višina plošče: 200 mm, Splošni podatki Leto izdelave: 2011 Sistem zapiranja Zapiralna sila: 50 t Sistem zapiranja orodja: 50/ … Dimenzije plošč orodja: 446 × 446 mm Višina orodja: 200 mm Odpiralna pot: 350 mm Maksimalna razdalja plošč: 550 mm Izmetalna sila: 30 kN Dksdoyguwvjpfx Afxoh Hod izmetalca: 125 mm Brizgalna enota: … / 1350 Premer polža: 30 mm Volumen brizga: 85 ccm Teža brizga: 77 g Specifičen tlak brizga: 2.000 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 700 kN, Oprema: dokumentacija / priročnik, Seologica krmiljenje Vpenjalna sila: 70 t Premer vijaka: 40 mm (visoko trdna izvedba) Razdalja med stebri V: 370 mm Razdalja med stebri H: 370 mm Razmik med stebri: 370x370 mm Platišča HxV: 510x510 mm Debelina orodja min-maks: 200 Hod: 400 mm Prostornina brizgalnega polnjenja: 188 cm3 Dkedpfeygtquox Afxeh Tip: Uni Pogon: hidravlični Zračni ventil: 1 Delovne ure: 23.000 2 servo črpalki 4 prosti hladilni krogi 6 električnih grelnih con za orodje

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 900 kN, premer vijaka: 30 mm, delovna prostornina: 106 cm³, tlak vbrizgavanja: 2.042 letvica, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar distance (H x V): 420 x 370 mm Platen size (H x V): 630 x 613 mm Minimum mold height: 450 mm Maximum mold height: 925 mm Maximum platen daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Centricity, moving platen, diameter: 125 mm Centricity, fixed platen, diameter: 125 mm Maximum mold weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 ccm Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Max. screw speed: 372 min⁻¹ Screw torque: 490 Nm Plasticizing rate: 14 g/s (PS) Free injection rate: 103 g/s (PS) Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Dkedpfxsyglw Ts Afxsh Equipment Display language: German Hydraulic core pull, 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling device Interface for temperature control unit

Stanje: dober (rabljeno), Leto izdelave: 2011, vpenjalna sila: 650 kN, premer vijaka: 22 mm, delovna prostornina: 42 cm³, tlak vbrizgavanja: 2.864 letvica, BATTENFELD HM 65-130 Inventory No.: 503671 Manufacturer: BATTENFELD Model: HM 65-130 Control system: UNILOG B6 Dsdpfxjyglwms Afxjkh Year of manufacture: 2011 Technical Data – Clamping Unit Clamping force: 650 kN Tie bar spacing (h x v): 370 x 320 mm Platen size (h x v): 550 x 500 mm Min. mould height: 225 mm Max. mould height: 675 mm Max. daylight: 675 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 26 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Max. mould weight: 600 kg Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 41.8 ccm Injection pressure: 2864 bar Screw L/D ratio: 20 Screw stroke: 110 mm Screw speed: 398 rpm Screw torque: 238 Nm Theoretical injection rate (PS): 61 g/s Number of heating zones: 4 Nozzle stroke: 47 mm Dimensions & Weight Machine dimensions (L x W x H): 3.5m x 1.4m x 2m Total weight: 3000 kg Equipment Display language: German Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface Interface for temperature control unit Mould heating circuits: 6x

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 900 kN, premer vijaka: 30 mm, delovna prostornina: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Technical Data — Clamping Unit Clamping Force: 900 kN Tie Bar Spacing (h x v): 420 x 370 mm Dkodpfxsyglvpo Afxeh Platen Size (h x v): 580 x 630 mm Minimum Mold Height: 450 mm Max. Platen Distance: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Movable Platen Centering (D): 125 mm Fixed Platen Centering (D): 125 mm Max. Mold Weight: 800 kg Technical Data — Injection Unit Screw Diameter: 30 mm Shot Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 min⁻¹ Screw Torque: 490 N Free Injection Rate (PS): 103 g/s Number of Heating Zones: 4 Nozzle Stroke: 250 mm Dimensions & Weight Machine Dimensions (LxWxH): 3.7m x 1.5m x 2m Total Weight: 4100 kg Equipment Operating language: German CEE Socket 16A CEE Socket 32A Hydraulic Core Pull 2x Air Valve 1x Levelling Elements Ethernet Interface EUROMAP 13 Interface EUROMAP 67 Handling Interface Interface for Colour Dosing Unit Interface for Temperature Control Unit Mold Heating Circuits 8x

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 25.500 h, vpenjalna sila: 10.000 kN, premer vijaka: 110 mm, delovna prostornina: 3.136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Dkjdpfxoygk Eij Afxoh

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7826-1082, Stroj za brizganje plastike | DEMAG Ergotech Extra 35-80 (350 - 80) Zapiralna sila [kN]: 350 Število komponent: 1 Širina zapiralne plošče [mm]: 390 Višina zapiralne plošče [mm]: 390 Učinkovita razdalja med veznimi stebri, vodoravno [mm]: 280 Učinkovita razdalja med veznimi stebri, navpično [mm]: 280 Premer centrirnega obroča [mm]: 110 Minimalna vgradna višina [mm]: 180 Maksimalna vgradna višina [mm]: 350 Maksimalni odprtostni hod [mm]: 350 Maksimalni izmetalni hod [mm]: 100 Navoj [M]: 16 Maksimalna teža orodja [kg]: 310 Maksimalna teža orodja – pomična stran [kg]: 150 Premer polža [mm]: EE1:18 Maksimalna masa brizganja [g] PS: EE1:20 Razporeditev agregata: EE1: vodoravno Oprema: 2-kratni izvlek jedra, brez robota Ogled je možen kadarkoli po dogovoru. Nakladano franco tovornjak (Butzbach). Dedsygh Rvepfx Afxskh - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAG | Extra35 | Extra3580

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Zapiralna sila: 25 ton Izvedba: Menjalna miza Odprtina sila/hod min.-maks.: 100/225 mm Višina orodja variabilna min.-maks.: 122-222 mm Hod menjalne mize: 500 mm Največja teža na menjalni mizi: 120 kg Izmetalna sila/hod maks.: 16/40 kN/mm Polž: 22 mm Uporabna dolžina polža L/D: 20 Hod polža maks.: 90 mm Prostornina hoda: 34 cm3 Teža brizga: 31 g Tlak vbrizga: 2.000 bar Obratovalne ure: 15.571 h Dkedpfjyfg D Sex Afxsh

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 129876, vpenjalna sila: 350 kN, premer vijaka: 25 mm, razmak između stupova: 270 mm, delovna prostornina: 49 cm³, tlak vbrizgavanja: 1.860 letvica, Oprema: dokumentacija / priročnik, Ta stroj je bil uporabljen le za manjše proizvodne količine. Popolnoma delujoč. Enostaven za uporabo. Dkedpfxoyc Ungj Afxjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 420S 800-350 Année de fabrication : 2003 Unité d'injection : Diamètre de la vis : 50 mm Poids d’injection : 250 g Pression d’injection : env. 1300 bar Volume de dosage : 288 ccm Unité de fermeture : Force de fermeture : 80 t Entrecolonnes : 420x420 mm Dimensions des plateaux : 570x570 mm Éjecteur : hydraulique Unité de fermeture : hydraulique Commande : SELOGICA Équipement supplémentaire : Euromap 12 Interface robot Électrovanne x 1 Dkodpfx Afeycr T Toxoh Commande des noyaux Groupe d’injection trempé – bimétallique Électrovanne proportionnelle sur l’unité d’injection – injection précise Préhenseur original Arburg pour grappin latéral intégré Dimensions : Poids : 3800 kg Longueur/Largeur/Hauteur : 4,06x1,39x2,12 m Entraînement : Pompe/Moteur : 18,5 kW Puissance de chauffage : 10,2 kW Puissance totale : 28,7 kW Toutes les machines proposées sont mises en service par nos techniciens avant la vente. Il est possible d’obtenir une vidéo des tests techniques de la machine choisie ou de participer à des tests techniques en direct dans notre entreprise à Łódź. Prix : Sur demande

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 420C 800-250 Année de fabrication : 2004 Unité d'injection : Diamètre de vis : 30 mm Poids injecté : 89 g Pression d'injection : 2470 bar Volume dosé : 106 ccm Unité de fermeture : Force de fermeture : 80 t Entraxe colonnes : 420x420 mm Dimensions des plateaux : 570x570 mm Éjecteur : hydraulique Unité de fermeture : hydraulique Commande : SELOGICA Équipements additionnels : Euromap 67 Interface robot Noyau hydraulique x 1 Unité d'injection durcie - bimétal Dimensions : Poids : 3180 kg Longueur/Largeur/Hauteur : 4,30 x 1,64 x 2,08 m Entraînement : Pompes/moteur : 15 kW Puissance de chauffage : 6,5 kW Puissance totale : 21,5 kW Dodpfx Afsycr Tysxokh Toutes les machines proposées sont mises en service et contrôlées par nos techniciens avant la vente. Il est possible de recevoir une vidéo des tests techniques de la machine sélectionnée ou de participer à des tests techniques en direct dans notre entreprise à Łódź. Prix : Sur demande

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Arburg 1200T 800-150 / Vertical Injection Moulding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Shot Weight: 45 g Injection Pressure: 2,500 bar Dosing Volume: 54 ccm Clamping Unit: Clamping Force: 80 t Tie Bar Distance: 0x0 mm Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valve x 6 Hydraulic Core Pull x 6 Control System for Hot Runners Injection Unit Hardened – Bimetallic Rotary Table Diameter: 1200 mm Kistler Sensor – Mold Pressure Monitoring Machine serviced by authorised Arburg service in Germany Dimensions: Weight: 7,400 kg Dkodpoycr Tasfx Afxoh Length/Width/Height: 3.92x1.61x3.78 m Drive: Pump/Motor: 22 kW Heating Capacity: 9.4 kW Total Power Consumption: 31.4 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Arburg 420C 800-250 with Anguss Picker Amboss+Langbein Year of manufacture: 1999 Injection unit: Screw diameter: 40 mm Shot weight: 158 g Injection pressure: 1390 bar Dosage volume: 188 cc Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Controller with air valve Core pull control Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Dkjdpfx Ajycr S Njfxsh Heating power: 6.5 kW Total connected load: 21.5 kW All offered machines are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in a live technical test at our premises in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 420C 800-250 with Wittmann W721 Robot Year of manufacture: 2004 Injection Unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping system: hydraulic Control System: SELOGICA Dodeycr S Aepfx Afxjkh Additional Equipment: Euromap 67 Robot interface 2x air valve 2x hydraulic core pull Control for hot runner systems Hardened, bimetallic injection unit Proportional valve on the injection unit – precise injection Integrated system for monitoring pressure quality by Sensor Kistler – mold pressure measurement Original integrated tool crane Wittmann W721 Robot Year of manufacture: 2007 4-axis robot: 3 axes driven by electric servomotors; C-axis Axis travel: X-550, Y-1200, Z-1250 Touchscreen control panel Robot with adapter Purchase of robot at an additional cost Dimensions: Weight: 3,180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are tested and operated by our service technicians prior to sale. A video of the technical tests for the selected machine is available upon request, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Arburg 420C 800-250 Year of manufacture: 1999 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Dedpfx Asycr Sijfxjkh Machine has produced molded parts for the medical industry – cleanroom production conditions Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Arburg 320K 700-250 with Arburg Multilift H Side Robot Year of manufacture: 2005 Injection Unit: Screw diameter: 40 mm Shot weight: 158 g Injection pressure: 1,390 bar Dosage volume: 188 ccm Clamping Unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Platen dimensions: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Dedpjycr R Eofx Afxekh Control: SELOGICA Additional Equipment: Air valve x 3 Control for hot runner systems Hardened injection unit – bimetallic Central lubrication Dimensions: Weight: 2,350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.1 kW Total connected load: 21.1 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 370S 700-100/100 / 2K Machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of manufacture: 2009 Injection Unit: Screw diameter: 30 mm Shot weight: 65 g Injection pressure: 1390 bar Metering volume: 71 cm³ Clamping Unit: Clamping force: 70 t Tie bar spacing: 370 x 370 mm Size of mounting plates: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: 2K machine (two-component) Operating hours: 33,544 in automatic mode Euromap 67 Robotics interface Air valve x 5 Hydraulic core pull x 2 Control system for hot runners Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Parallel movements Vertical injection unit – screw diameter fi 20 mm (29 g/PS) Machine with cylinder / battery with compressed nitrogen (additional charging for faster operation) Machine equipped with integrated Arburg conveyor belt and original sorting flap Option to purchase original Weber rotary table Possibility to change screw diameters in both injection units for manufacturer-recommended screw sizes Dimensions: Weight: 4440 kg Length/Width/Height: 3.48 x 1.58 x 2.97 m Drive: Pump/motor: 15 kW Heating power: 4.9 kW Total power: 19.9 kW All offered machines are started up by our service technicians prior to sale. Dkedpfx Afoycr Rrjxsh A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request