Autogarant

Stanje: rabljeno, Leto izdelave: 1995, številka stroja/vozila: LC324, Rabljena popolna linija Tetra Pak TBA 8 500S Ta stroj je posebej zasnovan za polnjenje mlečnih izdelkov, kot je mleko, in je bil proizveden leta 1995 pri Tetra Pak. Obstaja vsa potrebna dokumentacija, vključno z uporabniškimi priročniki. Prav tako ima lastne varnostne ukrepe za preprečevanje nesreč. Gre za popolno linijo za polnjenje, ki jo sestavlja Tetra Pak polnilni stroj model TBA 8 500S, ki obdeluje 0,5 l Tetra Brik kartone. Ihsdpfoyvqn Rjx Adkow Na koncu linije je paletizer Mariani iz leta 1993. Linija prihaja z vsemi transporterji.

Stanje: rabljeno, Leto izdelave: 1994, številka stroja/vozila: LC613, Technical Specifications & Performance Data This used complete filling line is designed for industrial packaging of aseptic carton containers and is based on the renowned Tetra Brik Aseptic platform. It is intended for beverage production environments that demand hygiene and reliability, and offers continuous handling from aseptic filling, through cap application, to final packaging in cartons. As a used filling system, it provides a cost-effective way to increase capacity while maintaining quality standards. Main Filling Machine: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIM Year of Manufacture (Main Filler): 1994 Packaging Format: 1.0L Slim carton Auxiliary Units: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70 Line Application: Aseptic carton filling with downstream capping and palletizing Compliance: CE-marked Advanced Automation & Control Systems The line uses factory-integrated automation of the Tetra Brik Aseptic platform, designed for consistent performance and user-friendly control. Safety interlocks and secure access points support safe operation during beverage production. A standardized control architecture facilitates start, stop, and recipe management for the 1.0L Slim carton format. Centralized operator interface for coordination of filler, capper, and packer functions Automated sequences for aseptic filling and downstream handling Safety circuits and emergency stop devices for protected operation Designed to support rapid diagnostics and routine maintenance tasks Production Line Integration Capabilities This used filling line integrates aseptic filling with cap application and palletizing into a cohesive industrial packaging solution. It is suitable for beverage production environments that require carton handling and end-of-line packaging. The Cap Applicator 21 and Cardboard Packer 70 are configured to operate inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput. Inline configuration from filler through cap applicator to case packer Optimized for 1.0L Slim carton containers Compatible with standard conveyor and accumulation layouts Designed for inline operation; can be adapted to existing conveyor systems Machine Condition & Maintenance History Offered as a used, complete filling line in functional and ready-to-operate condition. It provides an efficient option for facilities seeking a used aseptic carton solution without the typical lead times of new equipment. Routine recommissioning and line integration services are recommended according to plant standards. Operational Condition: Ready for operation Commercial Condition: Used/second-hand industrial packaging line Performance & Versatility Ihodpfx Adoyvpt Eskjw The TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, designed for stable, hygienic beverage production. Downstream, the Cap Applicator 21 ensures precise…

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 26.600 h, številka stroja/vozila: LC612, Technical specifications & performance data This used filling line is an aseptic carton packaging solution from Tetra Pak, configured for 200 ml slim packs. It is designed for industrial packaging and beverage production of dairy and fruit juice products, offering reliable performance and efficient downstream handling. Configuration: Tetra Pak TBA/19 200B Slim Filler + TSA21 straw applicator + TCP70 carton packer + conveyor system + line controller and paper trolley Production speed: up to 7,500 packs per hour Pack volume: 200 ml slim Filling technology: aseptic Container type: carton (brick packs) Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70 Operating hours: 26,600 Manufacturing years: Filler 2000, Packer 2008, Straw applicator 2000 Advanced automation & control systems The system features an industrial automation architecture suited for high-availability food and beverage operations. Evaluation indicates a GE PLC platform is installed on downstream components, with recommended upgrades for PLC and I/O covers to ensure long-term reliability. Control: Central line controller with integrated conveyor logic PLC/HMI: GE PLC upgrade recommended for DE modules Isdpfsyvilzex Adkehw Format changeover: 200 ml slim change parts included; additional format parts may be required for other sizes Safety: Guarding and interlocks according to standard industrial packaging machine practices Production line integration capabilities This used filling plant is designed for inline operation from aseptic filling through straw application to carton packaging. Conveyors ensure smooth transfers between machines, enabling balanced production flow and efficient accumulation. Inline operation: Filler → Straw applicator → Carton packer Material handling: Conveyor system integrated into line controller Application range: Ideal for milk and juice in 200 ml slim cartons Scalability: Potential to adapt to other carton sizes with suitable change parts Machine condition & maintenance history The system has undergone maintenance evaluation and functionality checks prior to full re-commissioning. The filler can be operated up to the production step (water test completed). The downstream equipment (DE) can be powered on but requires additional intervention before heating up and full production. An overhaul is recommended, including replacement of components in the superstructure, machine frame, jaw system, end folder, service unit, straw applicator, and electrical systems. Current status: Maintenance/renovation in progress Condition summary: (text cut off)

Stanje: rabljeno, Leto izdelave: 2002, Overview This automatic self-adhesive labeling machine, model ENOS Base, was manufactured in 2002 and is designed for the application of front and back labels to bottles of various shapes. The machine uses pressure-sensitive (self-adhesive) labeling technology, enabling flexible operation without the need for mechanical format parts. The system can process round, cylindrical, and square bottles with volumes ranging from 0.2 l to 1.0 l, making it suitable for a wide range of applications in the beverages, spirits, or specialty products sectors. With a production capacity of approximately 1,000 bottles per hour (0.7 l format), the machine is well-suited for small to medium-sized production environments. Technical Data Manufacturer: ENOS Model: Base Machine type: Automatic self-adhesive labeling machine Year of manufacture: 2002 Labeling technology: Pressure-sensitive adhesive (self-adhesive) Label positions: Front label, back label Capacity: approx. 1,000 bottles per hour (at 0.7 l) Bottle formats: 0.2 l – 1.0 l Bottle shapes: round, cylindrical, square Format parts: Not required Ihsdoyuulpspfx Adkjw Condition: Used, dismantled

Stanje: rabljeno, Leto izdelave: 1996, Overview This labeling machine from Anker-Roland was manufactured in 1996 and is designed for applying cold glue labels to glass bottles. The machine is equipped with two labeling stations and four bottle plates, making it suitable for typical multiple-label applications in beverage and spirits bottling lines. The configuration allows the application of neck, front (body), and back labels. With a production capacity of approximately 3,000 bottles per hour at 0.7 l, the system is well-suited for small to medium-sized production lines. The machine includes eight format sets, covering bottle diameters from 60.5 mm to 86.5 mm, enabling flexible processing of various round bottle formats between 0.35 l and 1.0 l. Technical Data Manufacturer: Anker-Roland Machine type: Rotary cold glue labeling machine Year of manufacture: 1996 Serial number: 1058/96/065L Labeling stations: 2 Bottle plates: 4 Labeling positions: neck label, front label (body label), back label Output: approx. 3,000 bottles per hour (at 0.7 l with neck, front, and back label) Labeling technology: cold glue Bottle formats: 0.35 l; 0.5 l; 0.7 l (3 format sets); 1.0 l (3 format sets) Number of format sets: 8 Bottle diameter range: approx. 60.5 – 86.5 mm Bottle shape: round bottles Condition: used Availability: on request Iedpfeyuui Uex Adkohw

Stanje: rabljeno, Leto izdelave: 1997, Overview This linear filling machine, model ALWID Matador-HV, was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium-sized production environments. The machine operates on the high vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filling machine is equipped with five filling stations and achieves a throughput of approximately 1,000 bottles per hour at 0.7 l. One advantage of this system is that the filling machine itself requires no format parts, allowing flexible handling of different bottle sizes. The associated capping system can process both PP screw caps and swing top stoppers (grip corks). For this purpose, the machine is equipped with two closure sorting containers, one for each closure type. There are around ten format sets available for the capper, covering round and square bottles from 0.2 l to 1.0 l. With its conventional control system and robust mechanical construction, the ALWID Matador-HV represents a reliable solution for filling applications of beverages, spirits, or specialty liquids. Ihodpfx Adsyuufpjkow Technical Data Manufacturer: ALWID Model: Matador-HV Machine type: Linear filling machine (high vacuum filler) Year of manufacture: 1997 Filling principle: High vacuum filling with level control Number of filling stations: 5 Performance: approx. 1,000 bottles per hour (at 0.7 l) Bottle formats: 0.2 l – 1.0 l Bottle shapes: round, square Closure types: PP screw caps, T-corks (grip corks) Closure sorting systems: 2 sorting bowls (PP closures / grip closures) Format sets (capper): approx. 10 sets Control system: Conventional control Condition: Used

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 610 h, Funkcionalnost: popolnoma funkcionalen, 1) 12-POSTAJNI IZPIRALNIK V 2 FAZAH (VODA+ZRAK) za steklenice z največjim premerom 115 mm. Postopek izpiranja poteka samo, kadar so steklenice prisotne. Deli izpiralnih šob niso v stiku z vratom steklenice. 2) 12-POSTAJNI ELEKTROPNEVMATSKI VISOKOTLAČNI POLNILEC za steklenice z največjim premerom 115 mm. Nivo polnjenja je mogoče električno nastaviti s kontrolne plošče brez ročnega posega, in sicer od 25 do 100 mm pod vratom steklenice. Vsak polnilni ventil je opremljen s sterilizacijsko steklenico za čiščenje in sterilizacijo stroja. Sterilizacijske steklenice se nameščajo ročno. Polnilni ventil omogoča polnjenje negaziranih in gaziranih tekočin pri tlakih od 0 do 8 bar. Nivo polnjenja je natančno 100%. 3) MONOGLAVA stroj za zapiranje s kronastimi zamaški za D26 zamaške. Iedpfx Adeyukiwekshw Stroj za navojne zamaške je mogoče namestiti z doplačilom. Prenos steklenic med postajami poteka preko vijaka, ki usmerja in sinhronizira steklenice. Monoblok je opremljen z: - Zaščitnim ohišjem skladnim s CE standardi, s kaljenimi steklenimi vrati - Univerzalnim vijakom - Motoriziranimi nastavljivimi vodili ob straneh - Lažnimi steklenicami za sterilizacijo izpiralnika - PLC ter upravljalno ploščo z zaslonom na dotik - Električnim nastavljanjem višine vseh postaj MOŽNOSTI: - Pranje steklenic pri izhodu s 7 šobami - Notranja osvetlitev s 4 LED trakovi - Priprava stroja za daljinsko podporo Kapaciteta*: 1.100 litrov/uro Hitrost: 1.000–3.000 steklenic/uro (INVERTER) * Dejanska kapaciteta je odvisna od več dejavnikov: A) Tekočina B) Temperatura polnjenja C) Tlak v steklenici D) Tip steklenice Ob dobavi polnilnega stroja brezplačno priložimo tudi pakirno mizo.

Stanje: rabljeno, Leto izdelave: 2000, Pregled Stroj je zasnovan za visoko hitrostno obojestransko etiketiranje iz role. Stroj izvira iz proizvodne linije in je popolnoma funkcionalen. Ne proizvaja se več, je pa možen ogled. Tehnični podatki Zmogljivost: 21.000 steklenic na uro (bph) Oblike steklenic: 1,5 l in 0,5 l Obdelane etikete: V ROLI, dva zalogovnika za etikete v roli, en aplikator Obratovalne ure: približno 39.000 ur Napajalna napetost: 400 V ± 5 %, 50 Hz ± 1 %, 3F + N + PE; pomožno napajanje 24 V DC Delovna smer: levo-desno/v smeri urinega kazalca Priliv/izliv steklenic vzporedno na eni strani stroja Možnost kodiranja datuma minimalne trajnosti (Videojet Excel 170i Ultra High Speed) Ijdeyudr Eepfx Adkohw

Stanje: rabljeno, Leto izdelave: 2019, Pregled Ta izobarični monoblok za polnjenje pločevink je bil izdelan leta 2019 pri italijanskem podjetju GAI. Model GAI MLE 6661 CAN je zasnovan za polnjenje pijač v pločevinke. Stroj je že demontiran, shranjen in takoj na voljo. Tehnični podatki Kapaciteta: do 1.600 pločevink/h (33 cl); kapaciteta do 650 l/h Formati: 33 cl standard, 33 cl slim, 50 cl standard Uporaba: polnjenje pločevink Konfiguracija: Linearen monoblok s 6 izpiralnimi ventili, 6 polnilnimi ventili, 1 enoglavim zapiralnikom pokrovčkov, kontrolo teže z izmetalnikom, pralnim tunelom za pločevinke, shrambo pokrovčkov Ihjdpfx Adsyudacekew Format pokrovčkov: CDL202 Premer pločevink: 50 mm – 85 mm

Stanje: rabljeno, Leto izdelave: 2019, Pregled Ta centrifuga je bila izdelana leta 2019 pri proizvajalcu Alfa Laval. Model CLARA 250 je zasnovan za procesiranje piva v proizvodnji pijač. Stroj je še vedno nameščen in ga je mogoče po dogovoru videti v obratovanju. Takoj na voljo. Tehnični podatki Zmogljivost: 80 HL/h – 150 HL/h Uporaba: pivo Obratovalne ure: 1.800 h Ihedoyuc Ulepfx Adksw

Stanje: rabljeno, Leto izdelave: 2003, Pregled Ova rotaciona PET mašina za duvanje boca proizvedena je 2003. godine od strane nemačke firme Krones. Model S8 je dizajniran za proizvodnju visokokvalitetnih PET boca i prilagođen za boce od 1,5 litra i grlo boce PCO1881. Mašina je u dobrom radnom stanju, odmah dostupna i može se integrisati u postojeće proizvodne linije za napitke kao što su voda, gazirana bezalkoholna pića ili sokovi. Dostupan je sistem za transport boca vazduhom. Tehnički podaci: Namena: Proizvodnja PET boca Kapacitet: 14.000 boca na sat Godina proizvodnje: 2003 Formati boca: 1,5 l Oblik grla: PCO1881 Centralno hlađenje Sistem za transport vazduhom dostupan. Isporuka obuhvata: Mašina za duvanje boca Krones Contiform S8 (2003) Rashladna jedinica Dovod za preforme Rezervoar za preforme Uređaj za preklapanje preformi Sistem za transport vazduhom dostupan. Iedoyucauepfx Adkjhw

Stanje: rabljeno, Leto izdelave: 1997, Pregled Naslednji 2-komponentni mešalnik je bil izdelan leta 1997 pri nemškem proizvajalcu Krones. Stroj je v svojem trenutnem dobrem stanju na voljo takoj. Tehnični podatki Kapaciteta: 45.000 l/h Primeren za karbonirane pijače Letnik izdelave: 1997 Ihjdsyub T Hopfx Adkjw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 2.327 h, Funkcionalnost: popolnoma funkcionalen, Automatic linear monobloc in stainless steel, FLAT frame, consisting of: 1. Linear electro-pneumatic rinser – 8 heads 2. Linear electro-pneumatic high-pressure filler – 8 heads 3. High-pressure water jet for foaming 4. Single-head crown capper 4270P – Diameter 26 and 29 mm Power supply: 380V three-phase + neutral Output: 1,500 bottles (33cl)/hour – 1,100 bottles (50cl)/hour – 1,100 bottles (75cl)/hour Filling temperature between 2 and 4°C, product at max 3.5 bar Working direction: Left / Right Bottle type: cylindrical _____ Included equipment • Multi-format feed screw • Dummy bottle for rinser sterilisation • Dummy bottle for filler sterilisation • Dummy bottle for jetting sterilisation • PLC and touchscreen operating terminal • Cap/crown presence detector • Electric height adjustment on all stations • CE-compliant occupational safety protection • Pneumatic pump • Water sterilisation kit (Pall 1 micron filter + Pall 0.2 micron filter) • Complete channel for crown caps Ø26mm & Ø29mm with photocell • Integrated cleaning assistance (CIP program) Also included in the price: Pneumatic transfer pump Full brewery overhaul to be carried out within 2 months before dispatch (Value: €4,610) Possibility for on-site training with our production team for a few days (training schedule to be arranged together so you can see as many formats as possible) _____ Available formats (star sets): Ijdpfeyt Iuhsx Adkohw LONG NECK 33CL VICHY 33CL STEINIE 33CL NRW 50 50CL BRASSEUR 75CL METHODE TRAD 75CL _____ After-sales service & maintenance • After-sales service provided by GAI France • Ongoing maintenance contract with GAI France _____ Availability: Q4 2026 (mid-November 2026, upon receipt of the new machine)

Stanje: rabljeno, Leto izdelave: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously used in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and outfeed, making it suitable for high-speed labelling applications. The system is equipped with two labelling stations: one for neck and front labels and one for back labels. The neck label is applied with hot glue for sealing purposes, while the remaining labels are applied using cold glue. The machine includes two glue pumps and comes with a spare hot glue unit. The back label station can be disengaged, while the front station is fixed. Featuring 36 bottle plates and a production capacity of up to 33,000 bottles per hour, this machine is ideal for demanding returnable glass applications. As of January 2025, the machine has accumulated approximately 44,350 operating hours. Spare parts documentation is available. Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue/hot glue labeller Bottle plates: 36 Capacity: up to 33,000 bottles per hour Operating mode: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Ihodeyt Iltspfx Adksw Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: 2 labelling units 1 × neck and front label station 1 × back label station (disengageable) Glue system: 2 glue pumps Hot glue for neck label (tamper evidence/sealing) Cold glue for front and back labels 1 spare hot glue unit included Dimensions: Depth: 4,300 mm Width: 3,300 mm Power supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and in storage

Stanje: rabljeno, Leto izdelave: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK, and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and covers all major processing steps from depalletizing to palletizing. The labeller will be finalized according to the buyer’s requirements, allowing the system to be tailored to the intended bottle types and product portfolio. This system is suitable for returnable glass beverage applications. Based on the listed machines, the line is set up for crate handling, bottle washing preparation, empty bottle inspection, high-performance filling/capping, and repacking of returnable crates. For bottles with screw caps, the RINK machine can be integrated upstream of the bottle washer; for crown cap bottles, an additional format kit is required as per your note. Technical Data - Capacity: 33,000 bottles/hour - System type: Returnable glass bottling line - Main machine year of manufacture: mostly 1998 or later - Bottle type: Returnable glass bottles - Closure types: Crown cork and screw cap - Packaging type: Beverage crates / returnable plastic crates - Filling system: KRONES isobaric filling block - Special notes: Ihjdsytvyfjpfx Adkjw - RINK KM 790/4K-3K QL: only for bottles with screw caps - For crown cap bottles, an appropriate format kit is required - Labelling machine: supplied/completed according to customer requirements Scope of Supply - Depalletizer | Profipack | – | 2006 - Decrater | KRONES | Linapac A-T 1600 | 1998 - Crate washer | Hormes | Crate washer | 1992 - Case opener | RINK | KM 790/4K-3K QL | 2020 - Bottle washer | KRONES | Lavatec-KES | 1998 - Empty bottle inspector | HEUFT | Spectrum TX | 2015 - Filler block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 - Labeller | to be assembled per customer requirements - Crater | KRONES | Linapac F-T 1800 | 1998 - Palletizing system | Profipack | 2006 - Pallet wrapper | Robopack | 2006 - Pallet securing | Vertical strapping | 2006 Additional Information Bottle formats: - 0.25 l single bottle – Ø 57.5 × 215 mm - 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 l ale bottle – Ø 68.5 × 234.5 mm - 0.5 l ale bottle – Ø 68.5 × 270 mm - 0.5 l steinware bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria bottle – Ø 70 × 260 mm - 0.5 l NRW bottle – Ø 67 × 260 mm - 0.5 l single bottle – Ø 82 × 295 mm - 0.7 l GDB bottle – Ø 79 × 290 mm - 0.75 l GDB bottle – Ø 79 × 290 mm - 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm - 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Heuft Reflexx – visokohitrostni pregledovalnik praznih steklenic in etiket. Model: Reflexx HBBRTIXX Krmilnik: Spectrum TX Kapaciteta: do 50.000 steklenic na uro Leto izdelave: 2015 ODLIČNO STANJE To je več kot le hiter pregled. HEUFT sistem omogoča popoln pregled praznih steklenic iz stekla glede vseh napak, še preden so napolnjene, kar zagotavlja celovito kontrolo kakovosti in prinaša dodano vrednost celotnemu procesu polnjenja. Zakaj so ti HEUFT-ovi kontrolni sistemi ključni: 1. Popolna pokritost brez mrtvih kotov: Sistem ne pregleduje steklenice le površinsko, temveč izvaja celosten pregled dna, sten, zaključka in navojev iz vseh kotov. Takšna podrobnost je ključna za odkrivanje drobnih napak, ki jih človeško oko zlahka spregleda. 2. Napredne detekcijske tehnologije: Uporaba zmogljive kombinacije visokoločljivostnih kamer, pametne AI obdelave slik in pri nekaterih modelih tudi patentirane pulzne rentgenske tehnologije. To vključuje: - Napake v steklu: razpoke, okruški, vključki in poškodbe zaključka. - Tujki: vse od folije in cigaretnih ogorkov do insektov, ostankov tekočin (na primer kavstične sode ali olja) in – kar je najnevarnejše – steklenih drobcev, skritih na dnu. 3. Nizka stopnja lažnih izmetov: Zahvaljujoč inteligentni analizi slik (npr. HEUFT reflexx A.I.) sistem razlikuje kritične napake od nenevarnih kozmetičnih pomanjkljivosti, kar pomeni, da ne zavrže uporabnih steklenic. Ihodpfx Asytrdtedkow HEUFT SPECTRUM TX Centralizirano upravljanje: ena platforma za vse potrebe. Precizen, omrežno združljiv in integriran: HEUFT SPECTRUM TX predstavlja osnovo za različne tehnologije, module in funkcije. Naprave te generacije se lahko povsem prilagodijo individualnim potrebam na kraju samem in se lahko kadarkoli dogradijo zahvaljujoč univerzalni platformi.

Stanje: rabljeno, Leto izdelave: 1998, Overview This automatic bottle packaging machine Krones - Linapac F-T-1800 was manufactured in 1998 and was previously installed in a returnable glass bottling plant. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filling and inspection unit. The LINAPAC packer series is often used in high-performance beverage bottling lines due to its robust construction and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-output production environment and is suitable for integration into returnable glass bottling plants with comparable capacity requirements. Technical Specifications Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic placement of filled bottles into beverage crates Bottle formats: - 0.25 l single bottle – Ø 57.5 × 215 mm - 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 l ale bottle – Ø 68.5 × 234.5 mm - 0.5 l ale bottle – Ø 68.5 × 270 mm - 0.5 l stoneware bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria bottle – Ø 70 × 260 mm - 0.5 l NRW bottle – Ø 67 × 260 mm - 0.5 l single bottle – Ø 82 × 295 mm - 0.7 l GDB bottle – Ø 79 × 290 mm - 0.75 l GDB bottle – Ø 79 × 290 mm - 1.0 l GDB bottle (light) – Ø 84 × 305 mm - 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm Iodoytq Taspfx Adkohw - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request

Stanje: rabljeno, Leto izdelave: 1998, Overview This Krones Sensometic beer bottling line was manufactured in 1998 and was previously installed in a high-capacity beverage filling plant. The machine is designed for isobaric beer filling and is equipped with 77 filling valves, enabling high-throughput production. The bottling line is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown corks. Both capping systems are equipped with 12 capping heads, and the cap sorting systems are integrated into the machine. With a design capacity of approx. 33,000 bottles per hour, the machine is suitable for large-scale reusable glass bottling operations. The system supports a wide range of bottle formats commonly used in the brewing industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filler with integrated capping systems Year of construction: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: Screw capper – 11 heads, Crown cork capper – 11 heads Cap handling: Integrated cap sorting systems on the machine Bottle formats: - 0.25 l single bottle – Ø 57.5 × 215 mm - 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 l ale bottle – Ø 68.5 × 234.5 mm - 0.5 l ale bottle – Ø 68.5 × 270 mm - 0.5 l stein bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria bottle – Ø 70 × 260 mm - 0.5 l NRW bottle – Ø 67 × 260 mm Ijdeytqzwepfx Adkshw - 0.5 l single bottle – Ø 82 × 295 mm - 0.7 l GDB bottle – Ø 79 × 290 mm - 0.75 l GDB bottle – Ø 79 × 290 mm - 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm - 1.0 l AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Stanje: rabljeno, Leto izdelave: 2015, Overview This HEUFT Spectrum TX Empty Bottle Inspector was manufactured in 2015 and is used for the automatic quality control of empty glass bottles prior to the filling process. The machine is part of the HEUFT Spectrum TX series, which utilizes the manufacturer's Reflexx inspection technology for highly precise bottle inspection. The system detects foreign objects, glass defects, and liquid residues inside the bottles, thus ensuring that only compliant containers proceed to the filling phase. HEUFT inspection systems are widely used in modern beverage filling plants due to their reliable optical inspection technology and modular design. The machine was installed in a high-performance filling plant with a capacity of approximately 33,000 bottles per hour, making it suitable for large-scale industrial beverage bottling operations. Iodpfx Asytp Ucedkohw Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HBBISHXX Machine type: Empty Bottle Inspector (EBI) Technology: Reflexx inspection technology Year of manufacture: 2015 Capacity: approx. 33,000 bottles/hour Inspection functions: - Detection of foreign objects - Detection of glass damages or defects - Detection of liquid residues in bottles Application: Quality inspection of empty glass bottles before filling Typical installation position: Upstream of the filling system in beverage bottling lines Condition: Used Availability: On request

Stanje: rabljeno, Leto izdelave: 1992, Overview This crate washing system from HORMES was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is used for cleaning beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass filling plants to ensure that empty crates are properly cleaned before refilling and reintegration into the circulation process. Hormes machines are known for their robust construction and long service life in beverage production. The machine is suitable for integration into returnable bottle lines and provides a functional solution for crate cleaning in beverage production systems. Isdpfx Aeytpnisdkohw Technical specifications Manufacturer: Hormes Machine type: Crate washing system Year of manufacture: 1992 Application: Cleaning beverage crates in returnable bottle lines Typical installation: Upstream of the unpacker in returnable glass bottling plants Condition: Used Availability: Upon request

Stanje: rabljeno, Leto izdelave: 2020, Overview This automatic screw cap remover (screwdriver) from RINK was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before they enter the bottle washing process. The machine was installed in a returnable glass bottling plant with a capacity of approx. 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure bottles enter the cleaning process without caps. The machine is configured for 0.75-liter GDB bottles in 12-bottle crates and includes format parts for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The unit includes a closure discharge system and a blower unit for removing caps from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic Screw Cap Remover (Descrewder) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: Approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles prior to bottle washing Bottle format: 0.75-l GDB bottle (height approx. 295 mm) Crate formats: • 12-bottle pool N2 crate (400 × 266 × 333 mm) • 12-bottle single crate (395 × 295 × 355 mm) Crate transport: Cross-flow crate transport Infeed direction: Left → Right Conveyor height: approx. 700 mm (max. 750 mm adjustable) Dimensions: • Length: 2,700 mm • Width: 1,400 mm • Height: 2,950 mm Weight: Approx. 3,000 kg Electrical equipment: • Danfoss frequency inverter • Standard electrical equipment Additional features: • Cap transport system • Blower unit Ihodpfx Adeytphcjkjw Technical documentation available Condition: Used Availability: On request

Stanje: rabljeno, Leto izdelave: 1998, Overview This automatic bottle depalletizer Krones Linapac A-T-1600 was manufactured in 1998 and was previously installed in a returnable glass bottle filling plant for beer. The machine is designed to automatically remove empty bottles from beverage crates and transfer them to the bottle conveyor system for further processing. The depalletizer was operated in a production line with a capacity of approx. 33,000 bottles per hour and is therefore suitable for use in high-capacity glass bottle filling lines. Machines from the LINAPAC series are widely used in the beverage industry due to their robust construction and reliable crate handling. The machine is no longer in production, but is complete, electrically disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle depalletizer Year of manufacture: 1998 Rated capacity: Approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Ihodeytpc Hepfx Adkew Bottle Formats 0.25 l single bottle – Ø 57.5 × 215 mm 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm 0.33 l ale bottle – Ø 68.5 × 234.5 mm 0.5 l ale bottle – Ø 68.5 × 270 mm 0.5 l stein bottle – Ø 70.5 × 174 mm 0.5 l Bavaria bottle – Ø 70 × 260 mm 0.5 l NRW bottle – Ø 67 × 260 mm 0.5 l single bottle – Ø 82 × 295 mm 0.7 l GDB bottle – Ø 79 × 290 mm 0.75 l GDB bottle – Ø 79 × 290 mm 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate Formats 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Conformity: CE conformity available Availability: On request

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1798, POLNILNI MONOBLOK FIMER Leto: 2003 Hitrost: 2.500 steklenic/uro Model: SRT 12-12-1-S-VA-DEA Smer vrtenja: v smeri urinega kazalca Izpiralnik: 12 klešč Fiksna šoba Polnilnik z nizkim vakuumom Število ventilov: 12 Rotacijski zapiralnik z eno glavo Ihedpfxjytn Tko Adkow Tip zamaška: Naravni ravni zamašek in navojni zamašek Navojni zamašek: 30x60 Obstoječi formati zamenjave zamaškov Vakuumski sistem na zapiralniku Vbrizg plina Format: Ø 76 mm Zaščitne varnostne pregrade Vključena navodila za uporabo Vključene električne sheme Vključena izjava o skladnosti Obstoječi rezervni deli

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 85.296 h, Funkcionalnost: popolnoma funkcionalen, Tetrapak TBA 8 1L Slim Line V100 je sestavljena iz: polnilnika TBA 8 brez pull tab – 85.286 ur, aplicatorja pokrovčkov Tetra Cap 21 (Recap 3) – 36.416 ur, kartonskega pakirnika Tetra 70 – 38.626 ur, inkjet tiskalnika EBS 6500, približno 15 metrov transporterjev z motorji in zavorami ter rezervnih delov – vseh rezervnih delov je na voljo seznam. Linija je še vedno v proizvodnji in je takoj na voljo. Linijo smo pred nekaj leti kupili iz zelo velike tovarne v Nemčiji, kjer so jo vzdrževali izključno pri Tetra Pak. Cena ne vključuje DDV. Iodpfx Adoytnc Sjkjhw

Stanje: rabljeno, Leto izdelave: 2009, Overview This empty bottle inspector (EBI) was manufactured in 2009 by the German company Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage bottling plants. It was previously used in production, has been professionally dismantled, and is stored in a warehouse. The machine is available immediately from stock. Technical Data Formats: - 0.75 l gourmet bottle - 0.25 l gourmet bottle - 0.25 l Vichy bottle Application: Inspection of empty bottles before filling. Configuration: Multiple inspection modules, including base inspection, finish inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign body detection, bottle height control (tolerance ±2.5 mm). Inspection systems: - Base inspection (camera) - Finish inspection - Thread inspection (conical optics) - Mouth/bottle neck inspection - Sidewall inspection with LED lighting Isdpfxeythzns Adkjhw - Detection of transparent films on bottle base and sidewall - Detection of scuff marks via sidewall camera - Residual liquid detection via infrared and high-frequency systems Rejection systems: - Rejection of foreign bodies at the infeed - Rejection of contaminated bottles at the outfeed - Separate rejection of bottles with damaged finish or threads Utilities: - Pneumatic system (components by Festo/Bosch) - Electronic control cabinet cooling Conveyor height: approx. 1,050 mm Operating direction: left-hand machine