New sierra srevice srl

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Kledpfeyupulox Adksp Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 100 t, For sale is a hydraulic C-frame single column press with a pressing force of 100 t. The machine features a table size of 700 × 750 mm, maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly, and forming operations in industrial and manufacturing environments. Klodpoytql Aofx Adksp ##### Technical Data & Information: Hydraulic C-Frame Single Column Press – 100 t ####General Information - Type: Single column press / C-frame - Pressing force: 100 t - Table size: 700 x 750 mm - Max. ram-to-table distance: 550 mm - Working height: 1,000 mm - Overall dimensions (W x D x H): 1,200 x 1,150 x 2,550 mm - Total weight: approx. 5,800 kg - Frame: welded steel construction - T-slots / holes: DIN 650 / 22 mm ####Hydraulic Cylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Interchangeable press head: Ø 100 mm ####Hydraulic Unit - Return speed: 14 mm/s - Working speed: 9 mm/s - Hydraulic pump: ASC - Delivery volume: 19 l - Motor power: 7.5 kW - Oil tank capacity: approx. 70 l - Hydraulic block / valves: Dubomatic - Pressure display: manometer - Pressure adjustment: adjustable - Sensors: limit sensor and pressure switch - Cooling: air cooling - Hydraulic unit: mounted on top of the press ####Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 7.5 kW - Total installed power: approx. 10 kW ####Control Cabinet - Protection class: IP54 - Spare space: 30 % - Cooling: yes - Internal lighting: yes - Operating mode selector: lockable ####Operation - Manual operation via lever valve - Foot pedal control - Pressure setting via pressure relief valve - Pressure indication via manometer - Emergency stop at control panel (Hydraulic press, single column press, C-frame press, 100-ton press, 100 t press, workshop press, straightening press, assembly press, insertion press, hydraulic single column press, industrial press, production press)

Stanje: rabljeno, Leto izdelave: 1990, Tlak 100 t Dimenzija vpenjalne površine mize 800 x 800 mm Ksdeyif Nrjpfx Adkjlp Hod bata 450 mm Izteg 400 mm Vgradna višina 800 mm Višina mize nad tlemi 900 mm Sila vlečne blazine 40 t Hod vlečne blazine 200 mm Vsebnost olja 700 l Hitri hod navzdol 185 mm/s Hitri hod navzgor 160 mm/s Delovna hitrost 55 mm/s Skupna potrebna moč 17 kW Teža stroja pribl. 5 t Prostorske dimenzije pribl. 2,2 x 1,2 x 3,4 m Stroj je opremljen z vlečno blazino.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.200 mm, skupna širina: 1.200 mm, skupna dolžina: 1.900 mm, stiskalna sila: 100 t, širina mize: 750 mm, dolžina mize: 560 mm, obratovalna hitrost: 200 mm/s, skupna masa: 5.040 kg, hitrost vzvratne vožnje: 200 mm/s, širina plošče bata: 530 mm, dolžina plošče bata: 400 mm, hod: 500 mm, Oprema: dokumentacija / priročnik, Hidravlična stiskalnica PYE 100 S1M z izmetalcem.\nProizvajalec: Werkzeugmachinen GmbH Zeulenroda (Nemčija), leto 1990.\nParametri:\nMaksimalna stiskalna sila: 100 ton.\nDelovni tlak: 16 MPa.\nMaksimalna izmetalna sila: 40 ton.\nHod batnice izmetalca: 200 mm.\nZgornja miza: 530x400 mm.\nSpodnja miza: 750x560 mm.\nSvetla odprtina: 800 mm.\nHod cilindra: 500 mm.\nHitrost navzdol: 200 mm/s.\nHitrost navzgor: 200 mm/s.\nPotreba po moči: 17 kW.\nTeža: 5040 kg.\nVišina: 3200 mm, Dolžina: 1900 mm, Širina: 1200 mm. Kljdpfsygtzysx Adksp

Stanje: novo, Leto izdelave: 2026, Druck 100 t Ausladung 250 mm Hub 400 mm Einbauhöhe 500 mm Tischfläche 800 x 500 mm Steuerung Siemens S7 Durchfallöffnung im Tisch 0 mm Tischhöhe über Flur 500 mm Stößelfläche 800 x 500 mm Arbeitsgeschwindigkeit 10 mm/sec Geschwindigkeit ab 110 mm/sek Geschwindigkeit auf 160 mm/sek Antriebsleistung 11,0 kW Maschinengewicht ca. 5,5 t Abmessungen L x B x H 1,9 x 1,7 x 2,9 m Einständerpresse mit - Zylinder gehärtet und verchromt - Hauptzlinderdurchmesser 220mm - Hilfszylinderdurchmesser 50mm - Pumpe, Ventile und Filter von Bosch Rextroth - Hydraulisches Überlastventil Kedpfoyfwywjx Adkjlp - Hydraulisches Proportionalventil - Bedienpanel von Siemens Touchscreen mit Fernwartungszugang Einstellungen für Hub, Druck, Geschwindigkeit und Verweilzeit - Sensoren und Lichtschranke nach Kategorie 4 - 2-Hand Bedienpult mit Reset und Not-Aus-Taster - CE-Kennzeichnung

Stanje: novo, Leto izdelave: 2026, Druck 150 t Ausladung 300 mm Hub 400 mm Einbauhöhe 600 mm Tischfläche 1000 x 600 mm Steuerung Siemens S7 Durchfallöffnung im Tisch 0 mm Stößelfläche 1000 x 600 mm Arbeitsgeschwindigkeit 5 - 15 mm/sec Geschwindigkeit ab 130 mm/sek Geschwindigkeit auf 180 mm/sek Antriebsleistung 18 kW Maschinengewicht ca. 12,0 t Abmessungen L x B x H 2,4 x 1,9 x 3,5 m Kljdsyfwxtepfx Adkjp Einständerpresse mit - Zylinder gehärtet und verchromt - Hauptzlinderdurchmesser 270mm - Hilfszylinderdurchmesser 70mm - Pumpe, Ventile und Filter von Bosch Rextroth - Hydraulisches Überlastventil - Hydraulisches Proportionalventil - Bedienpanel von Siemens Touchscreen mit Fernwartungszugang Einstellungen für Hub, Druck, Geschwindigkeit und Verweilzeit - Sensoren und Lichtschranke nach Kategorie 4 - 2-Hand Bedienpult mit Reset und Not-Aus-Taster - CE-Kennzeichnung

Stanje: rabljeno, Leto izdelave: 1985, Tlak 6,3 t Hod 250 mm Izvlek 150 mm Višina vgradnje 440 mm Površina mize 330 x 270 mm Višina mize nad tlemi 970 mm Površina bata 65 mm Vsebnost olja 30 l Pogonska moč 1,5 kW Potrebni prostor (ŠxGxV) 0,8 x 1,3 x 2,4 m Z oljnohidravličnim pogonom, svetlobna pregrada (znamka Sick C 4000), krmiljenje odvisno od tlaka/časa in hoda, zgornja in spodnja omejitev hoda, mehanski globinski omejevalnik, dvoročno upravljanje Kot stoji in leži, BREZ nadaljnjih del, naloženo na tovornjak brezplačno Kledpfxoyfwvlo Adkop

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 120 t, skupna masa: 12.000 kg, Hidravlična upogibna stiskalnica Znamka: Hidrogarne / Ermaksan Model: AP 4100-120 Leto: 2003 Moč: 11 kW Teža: 12.000 kg Kljdpfx Adex Tp Aujkep Dolžina upogiba: 4100 mm Sila: 120 t Hitrost približevanja: 80 mm/s Delovna hitrost: 8 mm/s Spuščanje orodja in os X s krmiljenjem ELGO. Vpenjanje noža PROMECAM. Vključno: - Celotna matrica 4 m, 90x90 mm z več V režami - Nož "kozja noga" 4 m, višina 90 mm v segmentih po 835 mm in nekaj krajših delov - Seti ravnih in 30-stopinjskih nožev (glejte slike nožev na paleti)

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, vgradna višina: 500 mm, širina mize: 1.400 mm, hod: 300 mm, • Machine Type: Hydraulic Press / C-Frame Press • Manufacturer: Müller Weingarten (historic German engineering company) • Model Designation: CKD 100 4.1 • Application Areas: Kljdox Ry Hrjpfx Adksp • Forming, punching, and pressing of metal or plastic parts • Small and medium series production • Tool and die making • Design: Robust H-frame or C-frame construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (model designation indicates approximately 100 tons nominal force – standard for CKD models) 📐 Key Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Suitable for a wide range of applications (e.g., deep drawing, bending, punching) • Sturdy construction: Designed for continuous industrial use • Tool integration: Adapter for custom tools and dies • Operation: Generally manual or semi-automatic, depending on year of construction 🧱 Typical Applications Hydraulic presses from the CKD series are used in manufacturing for: • Metal forming (e.g., bending, deep drawing) • Press-fitting of assemblies • Assembly processes with defined forces • Quality control and test pressing Complete wiring diagrams and documentation available! Inspection under power possible at any time.

Stanje: rabljeno, Leto izdelave: 1967, skupna višina: 2.850 mm, skupna širina: 1.750 mm, skupna dolžina: 2.000 mm, Lastna teža: 6.000 kg - Leto izdelave: 1967 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 1166 - Upravljanje: Klasično - Model stiskalnice: C-okvirna stiskalnica - Tlačna sila [ton]: 100 - Največji hod [mm]: 250 - Dolžina mize [mm]: 740 Kjdpfsx N Sxdjx Adkelp - Širina mize [mm]: 500 - Dolžina bata [mm]: 250 - Izsek [mm]: 350 - Transportne mere: 2000mm x 1750mm x 2850mm (d x š x v) - Transportna teža [kg]: 6000kg - Transportna pakiranja [kos]: 1 Finančne informacije DDV: Navajena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in prevzem v račun sta možna kadarkoli za vse industrijske naprave Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 1981, skupna višina: 2.850 mm, skupna širina: 1.800 mm, skupna dolžina: 1.100 mm, Lastna teža: 6.000 kg - Leto izdelave: 1981 - Dokumentacija na voljo: Ne - CE-certifikat: Ne - Serijska številka: 10340 - Upravljanje: konvencionalno - Model stiskalnice: C-okvirna stiskalnica Kjdpfx Adexywkqekslp - Tlačna sila [ton]: 100 - Največji hod [mm]: 160 - Dolžina mize [mm]: 630 - Širina mize [mm]: 550 - Dolžina bata [mm]: 1100 - Transportne dimenzije: 1100mm x 1800mm x 2850mm (d x š x v) - Transportna teža [kg]: 6000kg - Število transportnih paketov: 2 Finančne informacije DDV: Navedena cena ne vključuje DDV DDV/obdavčitev po razliki: DDV je za podjetja odbiten Dostava in odkup možno kadarkoli za vse stroje iz industrijskega področja Lukas van Rossum

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, stiskalna sila: 100 t, širina mize: 460 mm, dolžina mize: 460 mm, vrsta vhodnega toka: trifazni, pomik po osi Z: 570 mm, pritisk: 400 letvica, vhodna napetost: 400 V, 1 Hidravlična stiskalnica MUNARRIZ; Maksimalni pritisk: 400 bar Dimenzije mize: 460 x 460 mm Premer batnice: 180 mm Premer cilindra: 180 mm Približen navpični hod: 570 mm Kjdpfx Adsxt Hzfskslp Ročni pogon Hidravlična črpalka IHBER; Leto izdelave: 2024 Vključuje manipulacijsko roko J.ANGEL BACAICOA brez teže Moč motorja črpalke: 15 kW Dimenzije: 2900 x 2300 x 3000 mm Približna teža: 1500 kg Stroj je obratoval do maja 2025. Trenutno je razstavljen in ga ni mogoče preizkusiti. Brez garancije. Stroj je bil prenovljen leta 2024. Celoten hidravlični sklop je bil zamenjan z novim podjetja IBHER leta 2024. Če si potencialni kupec želi ogledati delovanje stroja, je strošek 1.500 evrov (brez davka).

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Kljdpfxowzzzfj Adkop Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Klsdpfx Adswrkctokjp Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €59,800 Leasing rate: €1,130.22 Pressing force: 100 t Stroke: 400 mm Table size: 800 x 500 mm Installation height: 500 mm Rapid advance speed: 110 mm/s Operating speed: 10 mm/s Return speed: 160 mm/s Motor power: 11 kW Length: 1,900 mm Width: 1,700 mm Height: 2,930 mm Weight: 5,500 kg Operating pressure: 250 bar Welded monoblock frame Hardened and chrome-plated cylinder 2 auxiliary cylinders and 2 round guides T-slots can be configured as per customer requirements Pump, valves, and filter by Bosch Rexroth Hydraulic overload valve Hydraulic proportional valve Cooler Electrical components by Siemens 8 additional digital inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via PLC Remote maintenance access Light curtain by Sick Safety enclosures Safety PLC by Siemens or Sick Sensors and light curtain conforming to Category 4 Two-hand control panel Klsdpfx Adswmwvcjkop Reset and emergency stop button Equipment in compliance with CE directives

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 91.200 € Ksdpfx Adjwir Dgskjlp Lizing mesečna rata: 1.723,68 € Tlačna sila: 100 ton Hod: 500 mm Tlačna plošča: 600 x 900 mm Miza: 700 x 1.100 mm Vgradna višina: 750 mm Izvlečna razdalja: 320 mm Hitrost hitrega hoda: 100 mm/s Delovna hitrost: 8,5 mm/s Hitrost vračanja: 165 mm/s Motor: 11 kW Dolžina: 2.100 mm Širina: 1.900 mm Višina: 3.350 mm Teža: 7.300 kg Delovni tlak: 240 bar Sila vlečne blazine: 30 ton Hod vlečne blazine: 200 mm Luknja v mizi: Ø 120 mm Delovni tlak vlečne blazine: 170 bar Hitrost vračanja vlečne blazine: 52 mm/s Površina vlečne blazine: 700 x 400 mm Dvoročno upravljanje Krmiljenje preko PLC Nastavljiv hod vlečne blazine Vodilne tirnice stiskalnice brez mazanja Svetlobne zavese

Stanje: novo, Leto izdelave: 2024, Stanje: novo Letnik izdelave: 2024 Številka zaloge: 7305 Dobavni rok: takoj, možnost predprodaje Država izvora: Italija Cena: 46.400 € Leasing obrok: 886,24 € Na zalogi: 1 Tlačna moč: 100 t Hod: 500 mm Bat: 700 x 350 mm Miza: 800 x 600 mm Vgradna višina: 500 mm Iztez: 300 mm Hitri pomik: 25 mm/s Delovna hitrost: 4 mm/s Motor: 4 kW Dolžina: 1900 mm Širina: 1200 mm Klsdpfx Adowiry Iekop Višina: 2600 mm Teža: 2100 kg Dvojno okroglo vodilo Miza in bat z T-utorom Dvoročno upravljanje Siemens PLC Manometer Navodila za uporabo Vključno s tlačnim stikalom

Stanje: novo, Stanje: novo Rok dobave: cca. 10 tednov po naročilu Država izvora: Turčija Cena: 74.100 € Leasing obrok: 1.400,49 € Tlačna sila: 100 t Hod: 300 mm Ksdpfxewiqy Te Adkjlp Tlačnik: 600 x 900 mm Miza: 700 x 1.100 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Delovna hitrost: 8,5 mm/s Hitrost povratka: 165 mm/s Motor: 11 kW Dolžina: 2.100 mm Širina: 2.050 mm Višina: 3.050 mm Teža: 6.500 kg 4-točkovno vodilo tlačnika Miza in tlačnik z utori v obliki črke T Ročna nastavitev hoda s pomočjo rotacijskega stikala Ročni in avtomatski način delovanja Svetlobne zavese Oprema v skladu s predpisi CE

Stanje: rabljeno, Leto izdelave: 1978, Pressure 100 t Stroke 150 mm Throat depth 345 mm Installation height 400 mm Table area 1200 x 600 mm Table height above floor 850 mm Ram area 560 x 500 mm Downward speed from 350 mm/s Upward speed 350 mm/s Working speed 25 mm/s Oil capacity 560 l Drive power 22.0 kW Weight 8.3 t Space requirement approx. 2.1 x 1.7 x 2.8 m (LxWxH) Kledpfx Asvzxp Uodksp Approved for manual loading operations according to German accident prevention regulations (UVV) With electro-hydraulic drive, light barrier (Sick), mechanical stroke limit with hydraulic damping, dual-hand and foot control

Stanje: novo, Leto izdelave: 2025, višina mize: 850 mm, globina grla: 325 mm, stiskalna sila: 100 t, širina mize: 650 mm, dolžina mize: 850 mm, Oprema: varnostna svetlobna zapora, STANDARD FEATURES - Stress-relieved and welding-tension-relieved steel construction body and components using vibration method - Eight-surface sliding/bearing system for high precision and long-lasting operation - PLC control and touch panel interface - Argon welding process for fastening elements and cold-drawn steel pipes - EN ISO 15614-1/2017 welding application certificate, accredited by TÜRK-AK and approved by WPQR and WPS. (Welding operations are supervised by "welding coordination engineers" certified to EN ISO 14731) Klsdpfjvzku Aex Adkep - Parallelism and perpendicularity tolerances implemented in accordance with ISO and DIN standards (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control for safe operation - Integrated cooling system TECHNICAL SPECIFICATIONS MODEL: CHCP 100 PRESSURE (TON): 100 STROKE (MM): 600 THROAT DEPTH (MM): 325 TABLE – RAM DISTANCE (MM): 700 TABLE DIMENSIONS (MM): 650 X 850 PRESS DEPTH (MM): 1300 PRESS WIDTH (MM): 750 TABLE HEIGHT FROM FLOOR (MM): 850 PRESS HEIGHT (MM): 2700 MAIN CYLINDER DIAMETER (MM): 230 MOTOR POWER (KW): 15 WEIGHT (KG): 8500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: 2 (TWO) MONTHS AFTER ORDER CONFIRMATION PRODUCTION AVAILABLE FROM 40 TO 200 TONS.

Stanje: rabljeno, Leto izdelave: 1996, Tlak 100 t Iztegnitev 510 mm Hod 600 mm Vgradna višina 1000 mm Površina mize 1025 x 650 mm Sila izvlečnega blazine 25 t Hod izvlečnega blazine 200 mm Površina izvlečnega blazine 600 x 400 mm Višina mize nad tlemi 970 mm Površina bata 1025 x 650 mm Hitrost iztega 350 mm/sek Kledpfxjvuunmj Adksp Hitrost vračanja 330 mm/sek Delovna hitrost 30–43 mm/sek Količina olja 540 l Skupna električna moč 48,0 kW Teža stroja ca. 12,0 t Prostorske zahteve ca 1,2 x 2,7 x 3,9 m Odobreno za ročno vpenjanje v skladu s CE-normo z oljno hidravličnim pogonom, hidravlična izvlečna blazina v mizi Na voljo video dokončane ‘sestrske’ naprave – z novo krmilno enoto

Stanje: rabljeno, Leto izdelave: 1993, Tlak 100 t Kljdpfx Asvuuflodksp Izpetje 320 mm Hod 160 mm Vgradna višina 480 mm Površina mize 630 x 550 mm Premer odprtine na mizi 200 mm Višina mize nad tlemi 860 mm Površina bata 560 x 450 mm Vsebina olja 500 l Skupna priključna moč 30,5 kW Teža stroja pribl. 6,4 t Prostorske zahteve pribl. 1,6 x 2,0 x 2,9 m Letnik 1979 – obnovljen 1993 Dovoljena za ročno vstavitev obdelovancev v skladu z nemško Uredbo o varnosti pri delu (UVV) z oljnohidravličnim pogonom, nastavljivim po tlaku/času in poti, z hidravličnim blažilcem reza, mehansko globinsko omejitvijo, dvoročnim upravljanjem. Stiskalnico lahko obratujočo preizkusite v našem skladišču – po želji je mogoča tudi ponudba z novo krmilno enoto.

Stanje: pripravljen za uporabo (rabljen), Stiskalnica, rezalni stroj z gibljivo glavo, prebijalni stroj, izsekovalni stiskalni stroj, hidravlična stiskalnica z mostom, Sanson Chiesa Turbo, rabljeni stroj Kjdpfxeukpcys Adkslp Proizvajalec: Sanson Model: Chiesa Turbo Skupne dimenzije: 3480 x 1040 x 2420 mm Teža: 5.500 kg Električni podatki: 380 V, 50 Hz Premer delovnega cilindra: 250 mm Obratovalni tlak: 200 bar Dolžina hoda: 120 mm Pritisna površina: 900 x 1000 mm Rezalna miza: 1040 x 2500 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Hidravlična PLC stiskalnica 100 t (1.000 kN) stisna sila Siemens PLC1200 serija Beijer zaslon 10" Hod 400 mm Namizna plošča 790 mm x 600 mm Hitrost pomika 110 mm Hitrost povratka 140 mm Sick svetlobna zavesa Klodpfonp Ndhex Adkjp Vgrajen modul za daljinsko vzdrževanje Rexroth hidravlika s hladilnikom Na voljo od 46. tedna na sejmišču Stuttgart Spremembe možno izvesti na zahtevo

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Klsdpfom Nntyex Adkep Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)