Kraus

Stanje: dober (rabljeno), Leto izdelave: 1995, 1 rabljeni univerzalni rezkalni stroj Proizvajalec: Deckel Maho Tip: FP 1 Letnik: 1995 s CE certifikatom Z aktivnim digitalnim prikazovalnikom Heidenhain TNC 123 Tehnični podatki: X-pomik: 300 mm Y-pomik: 160 mm Z-pomik: 340 mm Vpenjalno držalo: SK 40 Velikost mize: 600x210 mm Obrati vretena: 40-2000 min⁻¹ Teža stroja ca.: 1 t Potrebna površina ca.: 1,6x1,3x1,8 m Hsdpfezamw Iex Abxonn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Maho MH 500 C with Philips 432 CNC Linear Control and Accessories from Training Workshop – Excellent Condition! Technical Data: >> Year of manufacture: approx. 1985 >> Linear control: CNC Philips 432 >> Spindle speed up to 4000 rpm >> Total connected load: 24 kVA >> Travel (X/Y/Z): 500/400/300 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Weight: approx. 2000 kg >> Required floor space: approx. 2.6 m x 2.2 m, height 1.9 m Accessories and Equipment: >> Linear control: CNC Philips 432 >> Hydraulic clamping, vertical and horizontal >> Central lubrication >> Electronic handwheel >> Coolant system >> Tool cabinet with accessories: vice, tool holders, clamping devices, collets, precision ground parallels, and much more Complete documentation: manuals, machine card, operating instructions, electrical diagrams, etc. Hjdpfx Ajzaaq Uebxjnn About the machine: Offered here is a universal milling machine Maho MH 500C with Philips 432 linear CNC control, in very good condition. Each axis features a continuously variable drive, consisting of a responsive drive motor and a backlash-free ballscrew. The Maho is easy to operate thanks to various cycles, such as circular pocket milling, rectangular pocket milling, slot milling, drilling, deep hole drilling, thread cutting, etc. The milling machine was used in a training workshop. Moreover, the machine features hydraulic clamping on both the vertical and horizontal axes. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. You are welcome to inspect and test the Maho under power at our location.

Stanje: dober (rabljeno), Leto izdelave: 2020, 5-axis CNC machining centre – universal – Manufacturer: MAZAK Machine model: Variaxis J-500 Control: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travels - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary axis, rotary/swivel table): (degrees) 360 Feed X/Y/Z: (mm/min) 8,000 Rapid traverse - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 deg./min. Spindle - Max. spindle speed: (rpm) 12,000 - Drive power (S3 100 / 40): (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 Hnodjy Txrxepfx Abxsn - Tool length: (mm) 300 Machine table rotary swivel table Pallet system - Pallet changer: 2-fold - Clamping table dimensions: (mm) 500 x 400 Rotary swivel table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + ICS (internal coolant supply) 70 bar + Hinged belt chip conveyor + Oil mist extraction + Tool length measurement and breakage control + Additional interior lighting + Signal light (3-colour) Specifications and details may be subject to change and error.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 240 mm, največja hitrost vretena: 22.000 obr/min, nosilec vretena: MK 0, največja hitrost vrtenja: 22.000 obr/min, Oprema: dokumentacija / priročnik, Ponujamo to kot novo CNC rezkalno napravo Isel ICV 4030EC, letnik 2021, uporabljeno za izdelavo klišejev. Proizvajalec: isel Model: ICV 4030EC Letnik izdelave: 2021 Stanje: kot novo Hnedpfx Asy I Dp Sobxen Delovna površina: 300x240 mm Servo motorji, vreteno 1200 W do 22.000 vrt./min., menjalnik orodja za 4 orodja SK16, integriran računalnik, programska oprema RemoteNC. Kompaktna, hitra, natančna in tiha naprava. Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1993, X-pomik 500 mm Y-pomik 400 mm Z-pomik 420 mm Velikost mize 800 x 400 mm Območje podajalne hitrosti 1-3000 mm/min Hitri pomik 0,083-5 m/min Vpenjalo orodja ISO 40 Območje vrtljajev 20-4000 vrt/min Glavni pogon DC 5 kW CNC krmiljenje 355 HH Skupna priključna moč 10,9 kW Teža stroja cca 2300 kg Hodpfjyy A Dxex Abxonn Potrebna površina cca 2,5 x 2,5 x 2,0 m CNC rezkalni stroj za orodja s sistemom Heidenhain TNC 355 in zaščitno kabino proti brizganju.

Stanje: zelo dobro (rabljeno), Priložnost: CNC stroj s 4 osmi, z menjalcem orodij in žaginim agregatom Hodpsyrka Defx Abxsnn

Stanje: rabljeno, Leto izdelave: 1990, x-pomik 0800 mm y-pomik 550 mm z-pomik 500 mm Velikost mize 1000 x 630 mm Območje pomika 0-10.000 mm/min Hitri pomik 10 m/min Vpenjalo orodja ISO 40 Območje vrtljajev 20 – 4000 obr/min Glavni pogon DC 10 kW CNC krmiljenje Dialog 11 Skupna potrebna moč 15 kW Teža stroja pribl. 6500 kg Potreben prostor pribl. 3,0x2,5x2,0 m CNC rezkalni stroj z upravljanjem Dialog 11, zaščitno kabino in avtomatsko menjavo orodij s 30 pozicijami. Stroj je bil leta 2010 obnovljen in moderniziran pri podjetju FPS. Hnodpfx Aboyq Slxexjn

Stanje: rabljeno, Leto izdelave: 1990, X-hod 0600 mm Y-hod 500 mm Z-hod 500 mm Velikost mize 500 mm Območje pomika 2–10.000 mm/min Hitri pomik 10 m/min Vpenjalni stožec ISO 40 Območje vrtljajev 0–6300 obr/min Glavni pogon DC 8 kW CNC krmilje Dialog 11 Skupna potrebna moč 23 KVA Teža stroja cca 5050 kg Potrebni prostor cca 3,0x2,5x2,0 m CNC orodna rezkalni stroj s krmiljem Dialog 11, zaščitna kabina proti pršenju, Hsdpeyq Sk Uefx Abxjnn obratna miza kot četrta os in magazin za izmenjavo orodja s 40 pozicijami. Stroj je bil obnovljen. Stroj je bil leta 2010 prenovljen in moderniziran s strani podjetja FPS.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. - All linear guides with stainless steel covers - Automatic central lubrication - SIEMENS servo drive on all axes (open-loop control) - Max. spindle speed: 4000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency-stop slam switch. Greatly simplifies program setup - Tool changes by push button - Large access doors to minimize cleaning and maintenance time - Software package 'SINUMERIK 808D on PC' included (practical training software for offline programming and simulation of workpieces on PC; available for free download) SINUMERIK 808D ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC system. The compact and user-friendly entry-level solution is used for basic milling applications. Features such as simple operation, commissioning, and maintenance make it the perfect foundation for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel with IP65 protection class, the SINUMERIK 808D ADVANCED is ideally prepared for operation in harsh environments. Its compact dimensions make it suitable for installation in smaller machines. INCLUDED - RJ45 Ethernet port - 8.4" LCD color display with 800 x 600 resolution - Remote maintenance ready Dimensions & Weights - Length: approx. 1410 mm - Width/depth: approx. 1372 mm - Height: approx. 2007 mm - Weight: approx. 1000 kg Drilling/Milling capacity - Max. cutter head size: 50 mm - Max. shank cutter size: 25 mm Electrical Data - Connection voltage: 400 V - Network frequency: 50 Hz - Electrical connection - Total connected load: 5 kVA Horizontal Milling Table - Length: 620 mm - Width: 180 mm - Distance vertical spindle – milling table min.: 50 mm - Distance vertical spindle – milling table max.: 295 mm - T-slot size: 12 mm - Number of T-slots: 3 - T-slot spacing: 50 mm - Maximum load capacity: 30 kg Accuracy - Repeatability: ± 0.02 mm - Positioning accuracy: ± 0.01 mm Coolant/Lubricant System - Coolant pump drive power: 95 W - Tank capacity: 30 l Travel - X-axis (auto): 355 mm - Y-axis (auto): 190 mm - Z-axis (auto): 245 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 4000 rpm - Note: max. spindle speed must be reduced by approx. 20% during continuous operation - Drive motor power S1 (continuous): 1.5 kW - Drive motor power S6-30% (intermittent): 2.2 kW - Drive motor torque S1 (continuous): 9.5 Nm - Drive motor torque S6-30%: 14 Nm Feed Rate - X-axis: 10,000 mm/min - Y-axis: 10,000 mm/min - Z-axis: 10,000 mm/min Hjdpfxjymkkfe Abxenn Feed Motor Torque - X-axis S1 (continuous): 1.9 Nm - Y-axis S1 (continuous): 3.5 Nm - Z-axis S1 (continuous): 3.5 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine – direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine in column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button significantly facilitates program setup • Coolant system with a 70-liter coolant tank • Tool changes carried out automatically or by pressing a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled worktable – large, dimensionally stable, and precision ground for high accuracy • Very generously sized access doors to minimize cleaning and maintenance time • LED machine lamp for complete illumination of the work area • SIEMENS add-on package: material defect liability and free on-site service OSS SINUMERIK 808D • Software package with identical control layout, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no homing required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 • Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical specifications Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Milling table (horizontal) Length: 690 mm Width: 225 mm Distance vertical spindle–table min.: 90 mm Distance vertical spindle–table max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 150 kg Accuracy Repeat accuracy: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic connection Operating pressure: 6 bar Travel X-axis (automatic): 330 mm Y-axis (automatic): 220 mm Z-axis (automatic): 320 mm Distance spindle–column min.: 280 mm Distance spindle–column max.: 280 mm Vertical spindle Spindle taper: BT 30 Speed range: 10,000 rpm Drive motor power S1 (continuous): 3.7 kW Drive motor power S6-30%: 5.5 kW Drive motor torque S1 (continuous): 24 Nm Drive motor torque S6-30%: 36 Nm Feed rate X-axis: 15,000 mm/min Y-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed motor torque (continuous, S1) X-axis: 3.5 Nm Y-axis: 6 Nm Z-axis: 6 Nm Tool changer Design: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Hnodpfsymkdxjx Abxon Tool-to-tool change time: 7 s

Stanje: rabljeno, Leto izdelave: 2011, Rezkalni stroj Quaser MV 184, letnik 2011. Stroj je kompleten, naprodaj tako, kot je prikazano na slikah. Opremljen s hidravličnimi primeži, agregatom, transporterjem odrezkov, tračnim filtrom ter odsesovalno napravo. Hnsdpsyfm T Hjfx Abxon

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Te stroje se tržijo kot stroji za drugo operacijo (2 opp) in tudi za to zelo dobro služijo, vendar jih sami smatramo kot izjemne male stroje za prvo operacijo (1st opp). Možen prikaz delovanja. Izjemna zmogljivost za tako majhen stroj. Stroj ima 6 nosilcev orodij Leto: 2016 Krmiljenje: ProtoTrak TMX Velikost mize: 457 x 381 mm Pomik osi 'X': 355 mm Pomik osi 'Y': 305 mm Pomik osi 'Z': 455 mm Hitrost vretena: 50 – 6000 v/min Vpenjalni stožec vretena: BT 30 Kapaciteta zalogovnika orodij: 8 postaj Dimenzije (š x g x v): 760 x 1220 x 2585 mm Teža: 1.100 kg Prikaz možen po dogovoru. Hnsdpfx Asydvzdebxon

Stanje: rabljeno, Leto izdelave: 2015, XYZ 2-OP Vertikalni obdelovalni center Krmiljenje: ProtoTRAK TMX (2015) Leto izdelave: 2015 Hitrosti vretena do 6.000 obr/min Vretenasta konus: BT30 Velikost mize: 457 x 381 mm Hodi mize: 355 x 305 x 455 mm (XYZ) 6-postajni avtomatski menjalec orodja (ATC) Hitri pomiki: 15 m/min Hsdpjya H Nkefx Abxonn Tloris: 760 x 1.220 x 2.500 mm Teža: 1.100 kg Elektrika: 415 V Potreben zrak za ATC Naprodaj pri *Jet Machinery Ltd* Zaloga Jet Machinery št.: #79155 Serijska številka stroja: SOP02060 Cena: £17.950,00 + DDV Kljub temu, da si prizadevamo zagotoviti točnost zgornjih podatkov, ni zagotovljena. Potencialnim kupcem priporočamo, da preverijo vse bistvene podrobnosti. Zakon o varnosti in zdravju pri delu 1974: Kot dobavitelji ne moremo vedno zagotoviti, da oprema ustreza zahtevam zakona glede zaščite ipd. Predlagamo, da kupec pred uporabo napravo pregleda s strokovnjakom za varnostne zaščite.

Stanje: dober (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of Manufacture: 1983 Control System: Positioning and traversing control including monitor HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working Range X-axis (longitudinal) manual/automatic 410/390 mm Y-axis (transversal) manual/automatic 310/290 mm Z-axis (vertical) manual/automatic 400/380 mm Vertical quill travel 63 mm Clamping area vertical 830 x 224 mm Number of T-slots 4 Swivel table clamping area 700 x 285 mm 6 T-slots 12 H8/45 mm Workpiece weight 200 kg Distance table to spindle nose (vertical) 0 – 515 mm Distance table to spindle centre (horizontal) 30 – 565 mm Drive power (at 1500 rpm) 2.2 kW Hedpfx Abjx Ry Atexenn Speed range 45 – 2000 rpm Number of speeds 12 Speed increment (geometric progression) 1.4 Tool holder (DIN 2079) ISO 40 Feed range (all axes) 2 – 1500 mm/min Rapid traverse (all axes) 1.5 m/min Operating voltage 380 V / 50 Hz Machine dimensions 1.2 x 1.6 x 1.7 m Required space 2.1 x 2.1 m Machine weight 1100 kg EQUIPMENT/ACCESSORIES  Operation by hand and via CNC program  Vertical and horizontal machining  Swivelling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual vertical quill feed  Swivel table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in working area  Setup elements  Machine lamp  Documentation Condition: Control system overhauled, workshop-tested

Stanje: rabljeno, Leto izdelave: 1989, x-hod 300 mm y-hod 300 mm z-hod 400 mm CNC krmiljenje DIALOG 11 Vpenjanje vretena ISO 40 Hitrosti vretena 31 - 5.000 min⁻¹ Velikost mize 620 x 390 mm Obremenitev mize 250 kg Hedpfx Ajx Ndbqsbxonn Pogonska moč 5,5 kW Brezstopenjski podajalniki 2 - 6.000 mm/min Hod pinole 80 mm Obratovalna napetost 380 V Skupna potrebna moč 11,0 kVA Teža stroja pribl. 1,65 t Prostorske zahteve pribl. 1,85 x 1,90 x 1,80 m Električna omara 1,35 x 0,70 x 1,70 m - Tovarniška št.: 2836-0283 - Krmiljenje: DIALOG 11 - Električno ročno kolo - Horizontalno rezkalno vreteno - Naprava za hlajenje

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe Hnjdexmgguopfx Abxon - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 17.300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Q4A124301, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 20, TEHNIČNI PODATKI Delovno območje Pomik X-os: 350 mm Pomik Y-os: 250 mm Pomik Z-os: 300 mm Min. razdalja med čelom vretena in mizo: 120 mm Maks. razdalja med čelom vretena in mizo: 420 mm Miza Vpenjalna površina: 500 x 300 mm T-utori (število / dimenzija / razmak): 5x 45x100 mm Največja obremenitev mize: 100 kg Višina mize od tal: 880 mm Vreteno Območje vrtljajev: 50 – 10.000 min⁻¹ Moč motorja vretena (S6): 8,5 kW Vrtljivi moment vretena (S6): 41 Nm Vpenjalo orodja: ISO 30 Hnjdpfx Absxa Araoxjn Menjava orodja Število orodnih postaj: 20 Največji premer orodja: 63 mm (brez sosednjih orodij) Največja dolžina orodja: 200 mm Največja teža orodja: 5 kg Čas menjave orodja: 2,5 s PODROBNOSTI O STROJU Dimenzije & teža Mere stroja (D x Š x V): 1.600 x 1.700 x 1.980 mm Teža: 1.970 kg Priključna moč: 9 kVA Obratovalne ure: 17.300 h OPREMA 30 vpenjal 2 Gressel primeža Opomba: Stroj bo priključen na elektriko do 21.09.2025.

Stanje: rabljeno, Leto izdelave: 2015, Maho MH-C 800 milling machine. The machine underwent a retrofit in 2015. It is currently connected to the power supply and can be inspected on site. Hnjdpfx Aew D Hdkobxjn

Stanje: rabljeno, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel distances: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Retaining bolts: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Electrical connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105° / -15° - Direct position measurement system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 transmission stages Hnsdpfx Abovt D D Uoxsn - Fully enclosed safety cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirements L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Good condition

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table Hsdpelvyrbsfx Abxenn - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Stanje: potreben popravila (rabljeno), Leto izdelave: 1987, For sale is a compact machining center from Maho, model 300 C. The power supply is defective but repairable. Technical specifications: Year of manufacture: 1987 Model: MH 300 C CNC Control: Phillips 432 Table size: 550 x 275 mm Travel (X/Y/Z): 300/350/220 mm Spindle mount: SK 40 Spindle speed: 20–4000 rpm Main drive: 3.3 kW Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices are plus VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Hnjdoir U H Eopfx Abxon Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or ways to get in touch, please visit our website.

Stanje: skoraj kot novo (rabljeno), X-hod: 300 mm Y-hod: 220 mm Z-hod: 400 mm Površina delovne mize: 620 x 390 mm Hedeh Ty Hkepfx Abxonn Obrati vretena: 31 – 3150 obr/min Podajalno območje: 1 – 3600 mm/min Hitri pomik: 4000 mm/min