Eurochrom Eood

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, vpenjalna sila: 3.500 kN, premer vijaka: 60 mm, razmak između stupova: 720 mm, delovna prostornina: 763 cm³, tlak vbrizgavanja: 1.905 letvica, injekcijska masa: 695 g, minimalna višina orodja: 350 mm, skupna masa: 15.540 kg, Osnovni podatki Model: Brizgalna enota 1450 / Zapiralna sila 350 t Leto izdelave: 2013 Krmiljenje: NC5 Brizgalna enota Premer polža: 60 mm Prostornina brizganja: 763 cm³ Teža brizga: 695 g Specifičen tlak brizganja: 1905 bar Razmerje L/D polža: 20 Zapiralna enota Zapiralna sila: 350 t Dimenzije orodnih plošč: 1040 × 1060 mm Svetla razdalja med stebri: 720 × 720 mm Višina orodja: 350–745 mm Odpiralni hod: 730 mm Maksimalna razdalja med ploščami: 1475 mm Hod izmetalca: 200 mm Dimenzije in masa Dodpfx Ajzcnm Nsbtjuu Dimenzije (d × š × v): 7,64 × 2,01 × 2,27 m Teža: 15.540 kg Orodja in oprema 4 × hidravlično jedro 12 ogrevalnih con orodja 2-krožno pnevmatsko kaskadno upravljanje Hitre spojke Indunorm 2 pnevmatska ventila na gibljivi plošči Povečana moč pogona črpalke activeDrive – črpalka z regulacijo obratov activeProtect – aktivna zaščita orodja Polž, odporen na obrabo Bimetalni valj Brizganje z regulacijsko črpalko p+v (zaprta zanka) Robotski vmesnik EUROMAP 67

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, razmak između stupova: 630 mm, skupna masa: 14.500 kg, ogrevalna zmogljivost: 36 kW (48,95 KM), moč črpalke: 75.000 W, moč: 111 kW (150,92 KM), vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Ponujamo ta rabljeni brizgalni stroj ARBURG Allrounder Selecta 630 S 2500-2100, letnik 2005. Številka stroja: 197628 Letnik izdelave: 05/2005 Teža: 14.500 kg Zapiralna sila: 2.500 kN Obratovalna napetost: 400 V Frekvenca: 50 Hz Grelnik moč: 36,0 kW Moč črpalnega motorja: 75,00 kW Skupna instalirana moč: 111,0 kW Delovne ure črpalke: 38.989 Dujdpfx Abszcdw Doteu Delovne ure avtomata: 37.209 Stroj se uporablja občasno, število delovnih ur se lahko spremeni. Robot Wittmann ni vključen v ceno. Če imate vprašanja ali potrebujete dodatne informacije, nam prosim pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 54.980 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.500 kN, premer vijaka: 90 mm, razmak između stupova: 1.350 mm, delovna prostornina: 2.290 cm³, tlak vbrizgavanja: 1.839 letvica, minimalna višina orodja: 978 mm, odmični hod: 1.020 mm, širina plošče: 1.710 mm, višina plošče: 1.650 mm, skupna masa: 35.000 kg, število vbrizgov: 1, Oprema: dokumentacija / priročnik, KRAUSS MAFFEI KM 420-4300 CX z NADDIMENZIONIRANO ZAPIRALNO ENOTO Leto: 2011 Delovne ure črpalke: 54.968 Krmilje: MC 5 Brizgalna enota je STANDARDNA za ta tip stroja: Polž: 90 mm Volumen brizga: 2.290 cm³ Tlak brizganja: 1.839 bar Zapiralna enota je nadstandardne velikosti: Platišča: H x V: 1.710 mm x 1.650 mm Razmak nateznih stebrov H x V: 1.350 mm x 1.250 mm Minimalna višina orodja: 978 mm Svetla odprtina: 1.998 mm Zaradi tega znaša skupna teža stroja 35.000 kg namesto 24,2 t. Stroj je izdelan z zapiralno silo: 350 t, na željo kupca. Stroj omogoča začetek brizganja 2–3 mm preden se stroj povsem zapre. Zadnji servis: 26.05.2025. Zadnji pregled: januar letos. Stanje polža: Cmk je 3,62 Menjane akumulatorske flaše. Možno je pridobiti video stroja v delovanju, ki ga lahko pošljemo preko WhatsAppa. Stroj bo na voljo nekje v tednih 35–38 (avgust–september). Do takrat bo še v proizvodnji, vendar v zelo kratkih serijah. Dedjzcam Uepfx Abtsuu Ponudba velja samo za stroj; dodatna oprema ni vključena. Morda bo na razpolago tudi en robot SEPRO (večji model) z drugega stroja, ne s tega na slikah. Model: 5X – 35 Leto: 2017

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Injection Moulding Machine ENGEL VC1800/400 POWER Basic Information Manufacturer: Engel Model: VC1800/400 Power Type: Hydraulic Tie-Bar-Less Injection Moulding Machine Control System: Engel EC100 Year of Manufacture: 2005 Operating Hours: 110,000 h Country of Manufacture: Austria Clamping Unit Parameter Value Clamping Force 4,000 kN (400 tonnes) Opening Stroke 1,008 mm Ejector Stroke 250 mm Ejector Force 96.2 kN Dusdjzb Ivhjpfx Abtju Injection Unit (Current Configuration) Screw Diameter Ø60 mm Parameter Value Screw Diameter 60 mm Max. Injection Volume 764 cm³ Max. Shot Weight (PS) c. 695 g Max. Screw Speed 226 rpm Injection Rate 283 cm³/s Injection Pressure 1,963 bar Max. Injection Pressure 2,361 bar Nozzle Stroke 500 mm Nozzle Contact Force 110 kN The data for the injection unit are taken from the machine’s original technical datasheet. Drive Parameter Value Pump Motor Power 45 kW Mounting Plates The machine is part of the Engel Victory 400T series. Typical platen dimensions for this size machine are approximately: Parameter Value Fixed Platen approx. 1,200 × 1,100 mm Moving Platen approx. 1,200 × 1,100 mm Max. Mould Height approx. 300–800 mm Exact transport dimensions – 7.5 × 2.2 × 2.7 m / 20 t.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, številka stroja/vozila: 550584, vpenjalna sila: 2.500 kN, This FERROMATIK MILACRON injection moulding machine, model FERROMATIK K-TEC 250s, year 04/2006, is being auctioned in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG – Machines, Tools, Workshop Equipment, and much more." The lot includes a trio-technik conveyor belt (year 2004), a Griwa ring feeding system (year 2015), and a Hahn automation unit (year 2011). You will find this and many other items from the fields of injection moulding technology, production and workshop equipment, temperature control units, lifting technology, EDM machines, measuring devices, transport and staff room equipment, and much more on our RESTLOS auction platform. Nameplate data: Manufacturer: Ferromatik Milacron Europe Model: K-TEC250S Machine no.: 550584 Year of manufacture: 2006 Clamping force: 2500 kN International size: 2500H-1650 Injection pressure: 1575 bar Stroke volume: 1039 cm³ Power supply: 400 V, ~50 Hz Motor: 55 kW Heater: 22.7 kW Weight approx.: 16.5 t CE: 0036 Number: 0067860 Designation: M SPR / M29/INV 210125 / KOST 201023 Nameplate data: Manufacturer: trio-technik Maschinenbau GmbH Model: L-3000x1400 Machine no.: 240655-5 Year of manufacture: 06/2004 Cnr.: 31321 CE Griwa ring feeding system Nameplate data: Manufacturer: griwa Anlagen- & Maschinenbau GbR Description: Ring feeding system Type: 20059 Year of manufacture: 02-2015 Supply voltage: 230 VAC / 50 Hz Connected load: less than 1 kW Control voltage: 24 VDC Compressed air: 6 bar Hahn automation unit Nameplate data: Manufacturer: HAHN Automation Made in Germany Dusdpfx Ajzbtylobtju Number: 20021183 Part number: 409496.10.000 Year of manufacture: 2011 Weight: 100 kg Type: PL60 T CNC/3A RMP Connection: 3/N/PE/400 V, 50 Hz Power: 5.5 kW Current: 16 A CE as shown without further depicted items Function untested

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, vpenjalna sila: 1.500 kN, Hidravlični stroj za brizganje iz leta 2013. Ta Battenfeld HM150750 ima zapiralno silo 1500 kN in ponuja robustno zmogljivost za različne uporabe. Če iščete visokokakovosten stroj za brizganje plastike, razmislite o modelu Battenfeld HM150750, ki ga ponujamo v prodajo. Kontaktirajte nas za več podrobnosti. • Wittmann robot (ni vključen v navedeno ceno stroja; na voljo kot opcijski robotski avtomatizacijski sistem – cena na zahtevo posebej) Duedpfozbtvmox Abteu

Stanje: dober (rabljeno), Leto izdelave: 2016, 2016 Wittmann Battenfeld EcoPower 110/130 stroj za brizganje plastike z nadzorom Unilog B6P Vpenjalna sila: 110 ton. Premer polža: 22 mm. Volumen injekcije: 41 cm³. Razmerje L/D polža: 20. Izračunani potisni volumen: 41,8 cm³. Korekten tlak brizganja: 2.864 bar. Največja hitrost polža: 500 min⁻¹. Navor polža: 150 Nm. Sila kontakta šobe: 250/40 mm/kN. Zunanji pretočni volumen pri injekciji: 76 cm³/s. Kapaciteta gretja cilindra: 6,3 kW. Število ogrevalnih con: 4. Število delovnih ur: cca 35.953. Serijska št.: 137469-100 (2016). Dedpfjzbr A Eox Abtjuu Približne dimenzije (D x Š x V): 5.000 x 1.600 x 2.300 mm. Približna teža: 4.600 kg.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 3.548 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, injekcijska masa: 294 g, skupna masa: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 offers a clamping force of 1600 kN and a tie bar spacing of 520 mm. The machine is equipped with an injection unit with screw diameters of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, you should consider the SUMITOMO SHI DEMAG Systec 160/520-600 we have for sale. Contact us for further details. Dedpfx Abszbh Epstjuu • Tie bar spacing: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Max. mould weight: 1300 kg • Max. opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Letnik izdelave: 2015 Obratovalne ure: 25.109 ur Polž: 35 mm Tlak vbrizga: 2400 bar Volumen vbrizga: 192 cm³ Zapiralna sila: 120 t Razmak med stebri: 740 x 680 mm Min. vgradna višina orodja: 300 mm Maks. razmik plošč: 800 mm Mere: 5100 x 1500 x 2350 mm Dedpfxszbazio Abteuu Teža: 7000 kg Priključek: 22 kW Avtomatska vrata, enojni izvlek jedra, zračni ventil, ogrevanje orodja, nova cena 122.000,- € itd... Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 1500 T 2000-400 Vrtljiva miza (29.844 h) (S&P 3792) Leto izdelave: 2015 Obratovalne ure: 29.844 ur Polž: 40 mm Tlak vbrizgavanja: 2000 bar Volumen giba: 201 cm³ Zapiralna sila: 200 t Razmak med stebri: 1500 mm Min. višina orodja: 400 mm Maks. razmik plošč: 700 mm Dimenzije: 4700 x 2100 x 2600 mm Teža: 11.500 kg Priključek: 22 kW Duodpfx Aezbazcobteu Premer mize: 1500 mm, vrtljiva miza z 2 postajama (180°), dvojen izvlek jedra, izpiha naprava, vmesnik za barvni dozirnik, ogrevanje orodja, nova cena cca 250.000 € itd. Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei Injection Moulding Machine KM 300-2000 CX Year of manufacture: 2010 We offer a high-quality hydraulic injection moulding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system featuring a colour monitor, integrated operator panel, and three USB ports. Thanks to its robust design and high efficiency, it is ideally suited for the production of thermoplastic components. Equipment - Fully hydraulic clamping system - MC5 control with colour monitor - Integrated control panel - 3 USB ports - Complete plasticising unit for thermoplastics - Wear-resistant screw Ø 70 mm - Non-return valve - Open nozzle Technical specifications Clamping Unit Parameter Value Clamping force 3000 kN Mould opening force 169.3 kN Platen shifting force – opening 86.3 kN Platen shifting force – closing 67.8 kN Platen dimensions (h × v) 995 × 1050 mm Tie bar spacing (h × v) 630 × 630 mm Mould opening stroke 820 mm Minimum mould height 330 mm Maximum platen opening stroke 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection Unit Parameter Value Screw diameter 70 mm Max. injection pressure 1877 bar Injection volume 1078 cm³ Shot weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220/310 rpm Electro-hydraulic System Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Dry cycle time (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and Weight Parameter Value Net weight 14.5 t Dodpfjza Uuzjx Abtjuu Dimensions (L × W × H) 6.5 × 2.2 × 2.3 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Modern and fully operational Krauss Maffei precisionMolding 160-750 injection moulding machine, year of manufacture 2022. This machine ranks among the top models for industrial plastic injection moulding and is designed for precise, reliable, and efficient series production. Thanks to its advanced design, high performance, and precise control system, it is ideal for manufacturing demanding plastic components for automotive, electronics, consumer goods, and industrial applications. Technical data • Manufacturer: Krauss Maffei, Germany • Model: precisionMolding 160-750 • Year: 2022 • Power supply: 400 V / 50 Hz / 3P + N + PE • Rated heating capacity: 4.8 kW • Motor output: 25.2 kW • Total connected load: 55.0 kW • Full load current: 143.3 A • Fuse protection: 50 A • SCCR: 25 kA Machine features and benefits • Precision and reliability: enables production of highly precise parts with consistent quality • Energy efficiency: Optimised power and heating management reduces energy consumption • Modern control system: intuitive operation and precise setting of injection parameters Duedpfx Asza A H Eobteu • Production flexibility: suitable for various types of plastic parts, from small precision components to larger assemblies • Option to purchase injection moulds: allows immediate expansion of production capacity • Support during the production process: On serious enquiry, we can provide contacts of buyers for the manufactured parts Machine applications This machine is suitable for a wide range of industrial uses: • Automotive – precision body parts, covers, technical components • Electronics – device covers, switches, connectors • Consumer goods – parts for household appliances, toys, packaging • Industrial components – technical parts requiring high precision and reliability Condition and availability The machine is fully operational, maintained regularly, and ready for immediate production use. Personal inspection can be arranged upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 29.600 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 530 mm, delovna prostornina: 412 cm³, tlak vbrizgavanja: 1.820 letvica, TEHNIČNE PODROBNOSTI Zapiralna sila: 2.000 kN Premer polža: 50 mm Dsdpfx Aszavaljbtsuu Razdalja med stebri: 530 mm Prostornina giba: 412 cm³ Vbrizgalni tlak: 1.820 bar Teža vbrizga: 375 g Minimalna višina orodja: 200 mm Izmetalna sila: 62.000 N Izmetalni hod: 140 mm Hod odpiranja: 490 mm PODROBNOSTI O STROJU Krmiljenje: KEBA 1075 tipkovna kontrola Vgradna višina: 550 mm Dimenzije in teža Dimenzije (D x Š): 6.000 x 1.530 mm Skupna teža: 7.100 kg Grelnik: 18 kW Moč črpalke: 18.500 W Obratovalne ure: 29.600 h OPREMA Energetsko varčna servo hidravlika 2 x hidravlični vleki jedra 2 x zračni ventil Vmesnik Euromap 67 za robota Novo vgrajena, kaljena enota polža in cilindra s 50 mm polžem

Stanje: dober (rabljeno), Leto izdelave: 2006, Zapiralna sila: 150 ton Odpiralni hod: 500 mm Višina orodja: 250 mm Razmak med zapiralnima ploščama: 750 mm Duedpfx Aozatfrsbtju Razdalja med vodilnimi stebri: 470 x 470 mm Orodne pritrdilne plošče (Š x V): 650 x 650 mm Izmetalni hod: 175 mm Premer polža: 40 mm Volumen vbrizga: 201 cm³ Teža vbrizga: 184 g Delovne ure: 33.165 h Jedrni vlekač: 1x Zračni udarec: 1x Interferenca z robotom: da

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 4.200 kN, odmični hod: 710 mm, skupna dolžina: 7.900 mm, skupna širina: 2.200 mm, skupna višina: 2.500 mm, skupna masa: 21.000 kg, število vbrizgov: 2, moč: 68 kW (92,45 KM), Demag Ergotech 420/800 2300 with embossing function and Wittmann DR 633/CNC 6-316 robot Prices and further inventory at inventar-verkauf.de/id/alesco Additionally, two injection units are included; one of these has been used exclusively for clear glass applications. Details: Clamping force: 4200 kN Tie bar spacing: 800 x 710 mm Djdpey U Nkbofx Abtjuu Mold opening stroke: 710 mm Control system: Ergocontrol NC 4 Connected load: 68 kW Overall dimensions (LxWxH): 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Equipment/Accessories: Wittmann Robot DR 633/CNC 6-316 (XxYxZ) 900 x 1600 x 3000 mm, servo with support and enclosure 2-core pull circuits 2 I/Os Embossing function retrofitted 2 x Injection Units: Injection Unit 1: Shot volume: 891 cm³ Shot weight: 800 g (polystyrene) Screw diameter: 60 mm Injection pressure: 2420 bar Injection Unit 2: Shot volume: 1212 cm³ Shot weight: 1090 g (polystyrene) Screw diameter: 70 mm Injection pressure: 1877 bar WITHOUT KOCH material loader and clamping devices. If you have any questions or require further information, please feel free to send us a message or give us a call.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 52.999 h, vpenjalna sila: 1.500 kN, premer vijaka: 40 mm, razmak između stupova: 470 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 184 g, minimalna višina orodja: 250 mm, Arburg 470C-1500-400 brizgalni stroj s sortirnim loputam (255) Leto proizvodnje: 2014 Proizvajalec: Arburg Stanje brizgalnega stroja: rabljen Premer vijaka [mm]: 40 Injekcijska masa [g]: 184 Vbrizgalni pritisk [bar]: 2000 Zapiralna sila [kN]: 1500 Razmik med stebri [mm]: 470 x 470 Velikost plošče [mm]: 650 x 650 Minimalna višina orodja [mm]: 250 Tip upravljanja: Selogica Jezik: nemščina Vgrajena moč [kW]: 30,4 Delovne ure [h]: 52999 Dusdpjy U H Htjfx Abtju Teža [kg]: 4850 Dimenzije [mm]: 4500×1700 Polnilni lijak: NE Jedrna veriga: 2x Priklop robota: 67 Euro

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 300 kN, premer vijaka: 60 mm, razmak između stupova: 630 mm, delovna prostornina: 679 cm³, injekcijska masa: 618 g, dolžina plošče: 955 mm, širina plošče: 1.050 mm, Izvlek jedra 1/1 Robot Wittmann W621-0977 Dedpfxoy U Hcuj Abtouu

Stanje: rabljeno, Brizgalni stroj ARBURG 420 C - 1300 350/350 Stanje: rabljeno / glej slike... Duedpfx Asy Uzdgobtou

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, številka stroja/vozila: 61015538, This Engel injection molding machine, model victory 1050/220 tech, year of manufacture presumably 2010, is being auctioned as part of our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG – Machinery, Tools, Workshop Equipment & much more." Included in the lot are an MB Conveyors conveyor belt (year 2012) and a motan mixing unit (year 2024). You can find this and many other items from the fields of injection molding technology, production and workshop equipment, temperature control devices, lifting technology, EDM machines, measuring equipment, and transport & social room furnishings on our RESTLOS auction platform! Engel Injection Molding Machine Nameplate data: Manufacturer: Engel Serial No.: 177100 Year of manufacture: 2010 (partially obscured, assumed) Model: victory 1050/220 tech Weight: 12,200 kg motan Mixing Unit Nameplate data: Manufacturer: motan holding Designation: Mixing Unit Model: Mixing module - 2l - MB Rated voltage (UN): 24 V DC Control voltage (Us): 24 V DC Current (IL): 2.7 A Max. load (mmax): 8 kg Year of manufacture: 2024 Serial number (SN): 677A01A24 14293 RA: BM02A CE marking: present UKCA marking: present MB Conveyors Conveyor Belt Nameplate data: Manufacturer: MB Conveyors Model: N-CPR LOW-COST Year of manufacture: 2012 Duedpfx Ajy Uzdajbtju Matriculation no.: B20032 Voltage: 400 V CE marking: present Scope of delivery as shown. No additional items shown in the photos are included. Functionality untested.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 61015538, This KraussMaffei 350-2000 AX injection moulding machine, year of manufacture 2011, is being auctioned together with a conveyor belt from 2023 in our online auction "Closure of Wirthwein Friedberg GmbH & Co. KG premises – Machines, Tools, Workshop Equipment and much more." You will find this and many other lots from the fields of injection moulding technology, production & workshop equipment, temperature control units, lifting equipment, EDM machines, measuring devices, transportation & break room equipment, and much more on our RESTLOS auction platform! Duedpfey Ux Hlsx Abtsu Nameplate details: Manufacturer: KraussMaffei Injection moulding machine type: KM 350-2000 AX International designation: KM 2000 AX/350 Year of manufacture: 2011 Machine no.: 61015538 Machine weight: 22,600 kg CE marking: present Country of manufacture: Slovak Republic Nameplate details: Conveyor belt Designation: LIGHT CONVEYOR Model: CPT2021 ALL Year of manufacture: 2023 Serial number: C23690 CE marking: present Manufacturer: MB Conveyors srl as shown without any additional items pictured Functionality untested

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 618 cm³, tlak vbrizgavanja: 2.183 letvica, injekcijska masa: 562 g, minimalna višina orodja: 400 mm, hod izmetalca: 180 mm, Engel VC 1350/200 Tech Zapiralna sila: 200 ton Leto izdelave: 2007 Teža: 14.200 kg Dimenzije (d x š x v): 6,3 x 1,9 x 2,3 m Vbrizgalna enota: .../1350 Premer polža: 55 mm Vbrizgalni volumen: 618 cm³ Vbrizgalna teža (za PS): 562 g Specifičen pritisk vbrizga: 2183 bar Dodpsy Ui Nqsfx Abteuu Sistem zapiranja orodja: 200/... Dimenzije orodnih plošč: 860 x 570 mm Montažna višina orodja: 400 mm Odpiralna pot: 750 mm Maksimalna razdalja med ploščama: 1150 mm Izmetna pot: 180 mm Izmetalna sila: 80 kN Oprema: - 2 × hidravlični jedri na gibljivi plošči - Pnevmatski ventil - 8 področij vročih kanalov - 8-conski rotameter

Stanje: dober (rabljeno), Leto izdelave: 2010, Ref. No.: 18624 Manufacturer: WITTMANN BATTENFELD Dujdpjy Uiwhofx Abtou Model: EcoPower 180/350 UNILOG B6S All Electric Year of manufacture: 2010 Clamping Unit Clamping force: 180 t Opening stroke: 480 mm Tie bar spacing (h x v): 570 x 520 mm Min. mold height: 225 mm Max. mold height: 550 mm Platen size (h x v): 810 x 805 mm Injection Unit Screw diameter: 35 mm Shot volume: 168 cm³ Shot weight PS: 163 g Injection pressure: 2,083 bar Dimensions and Weight Dimensions LxWxH: 5.2 x 1.6 x 2.2 m Machine weight: 6,800 kg Additional information: The Wittmann Battenfeld EcoPower series stands for highly efficient all-electric injection molding technology, engineered for precise production processes and stable manufacturing conditions. All main machine movements are powered by servo-electric motors. Injection, dosing, clamping, and ejection are performed fully electrically, ensuring extremely precise motion control, high repeatability, and stable production quality. Compared to conventional hydraulic injection molding machines, the EcoPower series can achieve energy savings of approximately 60% to 80%, depending on the application. In addition, these machines offer reduced heat generation, smooth operation, and a clean production environment. The integrated UNILOG B6 / B6P control system is renowned for its user-friendly operation, reliable process control, and long-term stability. In combination with highly dynamic servo technology and low-vibration operation, the EcoPower platform is especially well-suited for technical plastic parts, electronic components, automotive applications, and medical production. To this day, the Wittmann Battenfeld EcoPower series remains one of the most reliable and energy-efficient all-electric injection molding machine platforms on the market.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, vpenjalna sila: 2.400 kN, premer vijaka: 50 mm, delovna prostornina: 540 cm³, tlak vbrizgavanja: 2.470 letvica, injekcijska masa: 491 g, minimalna višina orodja: 350 mm, Vbrizgalni stroj Battenfeld HM 500/3400 Splošni podatki Zapiralna sila: 240 t Letnik proizvodnje: 2011 Krmiljenje: Unilog B6 Vbrizgalna enota Oznaka enote: ... / 1330 Premer polža: 50 mm Tlak vbrizgavanja: 2470 bar Volumen vbrizga: 540 cm³ Razmerje L/D polža: 22 Sistem zapiranja Sistem zapiranja: 240 / ... Zapiralna sila: 240 t Dimenzije plošč: 910 x 930 mm Razmak med stebri: 630 x 570 mm Izmetalna sila: 59 kN Hod izmetalca: 200 mm Višina orodja: 350 mm Hod odpiranja: 725 mm Največja razdalja med ploščami: 1075 mm Dimenzije in teža Duedpfx Aboy Uhbfoteu Teža: 10.000 kg Dimenzije (d x š x v): 5,5 x 1,8 x 2,4 m

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Duedpfxsy Ub D Te Abtsu Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dusdpfx Ajy Ub D Hjbteu Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the highly precise, all-electric injection moulding machines, specifically developed for technical plastic components, automotive applications, electronic parts, and demanding high-volume production runs. All main machine movements are driven by direct-drive servo-electric motors. Injection, dosing, mould movement, and ejector functions are carried out entirely electrically, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly noted for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. Lower heat generation simultaneously reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, which allows very fast response times and provides highly precise injection control. The injection unit comes with 4 heating zones for homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key benefits of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume production runs Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.