CNC Zoner AB

Stanje: rabljeno, Leto izdelave: 2005, Tip: večvretenski stroj Csdpfx Ajyn Hf Ujfnepw Proizvajalec: Buffoli Model: 2D-TRIB10-6 CNC Leto izdelave: 2005 Stanje: rabljeno Količina: 1

Stanje: novo, Leto izdelave: 2024, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 20 mm, Hidravlične škarje za pločevino – stroj po naročilu (dobavni rok cca. 10–14 tednov) – vključuje nožno stikalo, zaslon na dotik, zadnji prostor z nadzorom s svetlobno zaveso, avtomatski/električni rezalni razmak, avtomatski/električni rezalni kot, hidravlični pritisni element, motorizirano zadnje vodilo do globine 1000 mm Cpjdpfx Aoynatlsfnow - Slike so simbolične -

Stanje: novo, Leto izdelave: 2025, delovna širina: 3.000 mm, najv. debelina pločevine: 10 mm, Hidravlične škarje za pločevino – stroj po naročilu (dobavni rok cca. 10–14 tednov) – vključuje nožno stikalo, zaslon na dotik, zadnji prostor z varovanjem z varnostno svetlobno pregrado, avtomatska/električna regulacija reze, avtomatski/električni rezalni kot, hidravlični pritiskač, motorizirano zadnje vodilo do 1000 mm globine Cjdpeym Uv Eefx Afnopw -Slike so simbolične-

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja hladilne tekočine: 2.000 l, Used, well-maintained transfer machine / rotary indexing table machine / dial-type machine MIKRON MULTISTAR CX 24 Availability: immediately The following modifications have been carried out on the system: Machine: • All motor cables replaced. • All sensor cables replaced. • PLC program adapted to toggle collets on and off. • Converted to Knoll coolant system. • Electrical schematic manually updated. • Frequency inverter replaced. • Part selector was fitted to the machine including an oil pump for oil recirculation. Saw: • Saw control upgraded to Mitsubishi i-QR system. • All electronics of the saw renewed. • Saw has been fully mechanically overhauled. Accessories: • 1 x Loading station (brass D= 3.9mm) • 1 x Unloading station • 1 x Part selector (8-way, see photo) • 1 x Lateral drilling unit Cedjyk Hraopfx Afnjpw • 1 x Rotary straightening unit (completely re-bushed in October 2023) • 1 x Feed / saw unit (control and inverter overhauled in 2021) • 1 x Pneumatic handling (via feeder tube) • 1 x Chip conveyor with dirty water pump (without chip cart) • 1 x KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump, incl. low-pressure pump (5 bar) and high-pressure pump (60 bar) The machine was operated with cutting oil. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Fleksibilnost: Naše Rotaflex strojevi ističu se izuzetnom fleksibilnošću, nadmašujući konkurenciju. Ovi strojevi su višenamjenski i sposobni izvoditi razne operacije uključujući tokarenje, glodanje, narezivanje navoja i izradu utora. Svaka stanica djeluje neovisno, s do 5 osi, što osigurava učinkovitu i preciznu obradu. Napredne mogućnosti tokarenja: Rotaflex strojevi su dizajnirani za stvarne tokarske operacije i opremljeni su steznim glavama (žabicama) koje mogu istovremeno pozicionirati na B osi i tokariti pri brzinama do 6.500 okretaja u minuti. Demonstracijske videozapise pogledajte u nastavku: Inovativne Plug-and-Run stezne glave: Naše Plug-and-Run stezne glave omogućuju brzu izmjenu steznih glava u svega nekoliko sekundi, što omogućuje glatke prijelaze između radnih zadataka. Ova tehnologija izdvaja tvrtku Technica u industriji rotacijskih transfernih strojeva. Cpodpfoyg Nwdjx Afnow Zašto odabrati Technica Rotaflex strojeve: Technica strojevi nude nenadmašnu svestranost i preciznost, čineći ih idealnim za serijsku proizvodnju gdje se traži visoka kvaliteta i prilagodljivost opreme. Kombinirajući švicarsku inženjersku preciznost s multifunkcionalnošću, naši strojevi pružaju pouzdan i učinkovit rad.

Stanje: rabljeno, Rotacijski transferni stroj znamke Technica, model Stemoflex Cpjdpfx Afsydcm Hjnsw

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: nefunkcionalno, skupna višina: 2.500 mm, skupna dolžina: 12.000 mm, skupna širina: 4 mm, moč: 65 kW (88,38 KM), skupna masa: 10.305 kg, Premer palice (maks.): 110 mm, Premer cevi (maks.): 110 mm, stružna dolžina: 350 mm, premer obdelovanca (maks.): 110 mm, Oprema: dokumentacija / priročnik, We are offering this used Sinico SIN-O-MATIC TOP 2000 saw and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control: NUM Automatic machine for cutting to length and end-finishing. Transfer machine with a horizontal axis table for cutting and end-machining of pipes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 pieces/hour, and is designed for machining small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Cjdpfjycr Nhjx Afnspw Maximum versatility for processing tubes and bars. Capable of performing the following operations: Beveling – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled, but it has a fault and therefore cannot be demonstrated. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K.966610 M, skupna višina: 3.056 mm, skupna dolžina: 4.825 mm, skupna širina: 3.500 mm, Ponujamo zelo dobro ohranjen avtomatski rotacijski stroj blagovne znamke Mikron Multifactor tip 60.015. Stroj iz leta 1997 je zelo lepo vzdrževan in takoj pripravljen za uporabo. Csdpfx Afjx Ura Eonepw Obdelava struženih delov je možna na do 15 postajah (maksimalno 60 taktov na minuto). Možno je dovajanje materiala v palicah ali obročih. Če imate dodatna vprašanja ali potrebujete več informacij, nas prosim kontaktirajte!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Hydromat HB32/16 CNC, transferni stroj z 8 vpenjalnimi glavami in 8 vpenjalnimi tuležnimi držali, krmiljenje Bosch MTX, opremljen s 16 obdelovalnimi enotami, vključno s 5 CNC-50/100 stružnimi postajami in 2 CNC triosnimi rezkalnimi enotami, Stäubli členkasti robot, polnilni magazin dolžine 4,2 m, hladilni sistem KNOLL z VRF / visokotlačno in nizkotlačno črpalko. Stroj je bil leta 2020 generalno obnovljen pri podjetju HME AG in opremljen s krmiljeno Bosch MTX. Cpjdpfx Afexz Eavjnjw

Stanje: rabljeno, MIKRON Multistar CX-24 / 1500 je rotacijski prenosni stroj visoke natančnosti, zasnovan za vrhunsko natančnost in zanesljivost. Zmogljivost: 24 postaj; največ 23 zgornjih, 22 spodnjih, 22 stranskih postaj; premer obdelovanca do 24 mm; proizvodna zmogljivost 70 kos/min (večstopenjsko 280 kos/min). Glavni podatki: hitrost vretena 500–32.000 obr/min; priključek 50 Hz, 3x 400 V; komprimirani zrak 6 bar; masa stroja približno 3500 kg; masa krmilne omare približno 1200 kg. Dosega tesne tolerance; tipične uporabe: avtomobilska, letalska, medicinska, urarska industrija in orodjarstvo. Cpedpfx Asxx U A Uefnsw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8450-02-001, premer vrtljive mize: 4.000 mm, Oprema: transportni trak za ostružke, TECHNICAL DETAILS Cjdpfx Aexur Ruofnspw Rotary indexing table diameter: 4,000 mm Processing stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large diameter of 4,000 mm for comprehensive machining operations - 12 NC drilling units with 12-position clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system including filtration and coolant systems - Measuring system and automatic loading/unloading for fully automated operation

Stanje: dober (rabljeno), Leto izdelave: 2010, Vrtljiva miza WEISS Tip: TC 220T letnik 2010. Cpedpfx Aoxr Dh Hsfnew

Stanje: rabljeno, 2x Pfiffner RT 100 Description: Rotary Indexing Table / Spindles: - Clamping Stations: 12 motorized spindles - Drive: Torque drive, water cooled - Position Measuring System: Direct - Indexing Time: 1.5 seconds - Spindles: Water-cooled motor spindles - C-Axes: 0.001°, hydraulically clamped - Speed: 5,500 rpm - Power: 11 kW - Clamping Device: Chuck Base Modules: - Technology: Positioning module, 3-axis - X-Axis: 50 mm - Y-Axis: 100 mm - Z-Axis: 100 mm - Measuring Systems: Direct on all axes - Coolant Supply: Integrated Max. Workpiece Size: 100 x 100 x 100 mm Station 1: - Horizontal: Raw part infeed (indexing conveyor + Stäubli robot) - Vertical: Raw part measurement Station 2: - Horizontal: 4-position turret, non-driven - Vertical: Remeasure clamping error (C-axis homing) Station 3: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 4: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 5: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: 6-position turret with WAN, 10,000 rpm Station 6: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 7: - Horizontal: Not equipped - Vertical: 6-position turret with WAN, 10,000 rpm Cpedpfxow Si T Ao Afnew Station 8: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: Not equipped Station 9: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 10: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: Not equipped Station 11: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: 6-position turret with WAN, 10,000 rpm Station 12: - Horizontal: Loading/unloading device with dual swing gripper + discharge conveyor Equipment / Accessories: - Chip Management: Chip conveyor - High Pressure System: 50 bar - Tool Monitoring: ARTIS breakage control - Raw Material Supply: Infeed belt with robot - Finished Parts Removal: Discharge belt with 3-way diverter - Oil Mist Separator: Electrostatic filter - Fire Extinguishing System: Kraft und Bauer - Part Marking: Laser - Part Cleaning: HESO cleaning system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je specialno predelana krožna avtomatska strojna celica za obdelavo aluminija, ki jo je preuredilo podjetje Stöferle. 1) Celoten stroj, priključna moč: 120kW, hidravlični tlak: 50bar, pnevmatski tlak: 6bar, transportna širina: pribl. 2600mm, postaj: 8, dimenzije stroja X/Y/Z: pribl. 3000mm/2600mm/2800mm, teža: pribl. 9500kg. 2) KSS naprava Knoll s strgalnim transporterjem, letnik: 2010. 3) Hidravlično agregat Hydropa. 4) Pnevmatski sistem Festo. 5) Centralni mazalni sistem ALS. Na voljo je dokumentacija. Ogled na lokaciji je možen. Cpodpfx Aew Rqw Tofnew

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drilling heads: multi-spindle drilling units Rotary indexing table: mechanically indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic via centric expanding mandrel, workpiece Ø approx. 80 mm Dimensions of machine (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • Machine designed for large batch production Cpsdpfsw H Rh Ssx Afnow • Stable cast iron machine table with side chip removal and separate coolant tank • automatic safety guard door • 5-station rotary indexing table • heavy-duty cast iron machine table, ideal for custom rebuilding or retrofitting • machine suitable for refurbishment / rebuild

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Cpodpfxow H I R Ro Afnjw Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: pripravljen za uporabo (rabljen), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing performance: 20 cycles/min, spindle stroke: 100 mm, drilling capacity steel/brass: 20 mm/30 mm, thread cutting capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Codpjw Hglmofx Afnopw

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Codpfxew E Hpvs Afnepw Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Cjdpfxjw Emx Rs Afnopw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Csdpowy I Tlofx Afnspw Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: nepreverjeno, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical threading unit Feed of drilling units: mechanical feed via quill Drill heads: single spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt 50 Hz Cpodpfx Afowyn S Uenew Accessories / Special equipment: • The machine is designed for mass production • The machine has a robust machine table with chip disposal to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary tools • The machine is equipped with a 6-station rotary indexing table

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Year of manufacture: approx. 1999; Control: Siemens S5 / Siemens HME; Stations: 12; Processes: sawing / feed / indexing; Operating hours: approx. 85,383. Includes loader, control cabinet, chip conveyor, coolant system, and a total of approx. 35 machining units. Documentation is available. An on-site inspection is possible. The machines are dismantled and stored, but you can view similar machines in operation. One machine is incomplete and suitable as a source of spare parts. Cpjdpewv Um Dofx Afnsw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, 3 Rotary Transfer Lines + 3 Linking Robots OVERVIEW - Bar feeder - Rotary transfer line 1 (sawing + machining operation 1) - Rotary transfer line 2 (machining operation 2) - Placement onto conveyor belt - Marking - Deburring station - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the sawing clamp and transfers it to the clamping device of rotary transfer line 1 (station 1) Rotary transfer line 1 (Machining Operation 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2×), drilling Ø 6.5 mm (4×) Station 5: Drilling Ø 5 mm (4×), threading M6 (2×), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2×) Station 6: Transfer to second line Rotary transfer line 2 (Machining Operation 2) Cpsdpjwqf R Nofx Afnjw Station 1: Robot takes part from station 6 of line 1 and places it in the clamping fixture of the second rotary transfer line Station 2: Contour milling bottom Station 3: Slot milling (2×) Station 4: Contour milling bottom (2×) Station 1 (again): Discharge onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Loading height: approx. 1200 mm Parts buffer: 10 bars Rotary Transfer Line 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feed axes: 14+1+5 NC axes Rotary Transfer Line 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feed axes: 9+1+3 NC axes Discharge Conveyor Chain conveyor: workpiece carriers made of plastic Inclination: approx. 3° Length: 8,000 mm Part detection: at loading station / marking station / unloading station Rotary Transfer Line 3 - SEMA REA 30/5-6S-NC-R Number of deburring positions: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Deburring cell extension: Blowing off workpieces Robot: for loading and unloading the deburring station, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB32-571, Oprema: dokumentacija / priročnik, transportni trak za ostružke, TECHNICAL DETAILS Number of CNC units: 8 Control: Siemens Chip conveyor: Knoll Filtration system: Vacuum rotary filter High-pressure system: Combiloop Bar loader: 3 m UNIT ALLOCATION PLAN Station 1: Sawing Station 2: Hydraulic drilling Station 3 H: CNC turning Station 3 V: Hydraulic drilling Station 4: CNC turning Station 5: CNC turning Station 6 H: Hydraulic drilling Station 6 V: CNC turning Station 7: No unit Station 8: CNC turning Station 9: CNC turning Station 10: Hydraulic drilling Station 11: Hydraulic drilling Station 12: CNC turning Station 13: CNC turning Station 14: Milling Station 15: Hydraulic drilling Station 16: Hydraulic drilling Cpedpfjwkd A Dsx Afnsw EQUIPMENT - Platform - Declaration of conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, EUBAMA S6, year 2010. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Cpodpfjv Ef N Ajx Afnew Maximum output (cycles/min): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Number of machining units: 15 PRA 52 P IEMCA bar feeder Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant tank The machine is in working condition.