Engin Topbac

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp mechanism (three-platen system) featuring a servo-electric drive for the clamping unit. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Pgodpsyft Nzefx Adysg Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing unit Complete unit for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle opening: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Opening width: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection throughput: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of cylinder heating zones: 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in a modern servo-electric configuration, offering high precision, energy efficiency, and process repeatability.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 28.646 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It offers a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine features a linear robot system and a 9-zone hot runner mold temperature control unit. Take this opportunity to purchase the DEMAG El Exis S250/630-2300 electric injection molding machine. Contact us for further information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar distance (H x V): 630 x 630 mm • Platen size: 950 x 950 mm • Minimum/maximum mold installation height: 330 mm / 830 mm • Maximum daylight (open space): 1505 mm • Opening stroke: 675 mm • Ejector stroke/force: 200 mm / 80 kN • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive Podpfx Aeyftamodyjgg • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating capacity: 14.8 kW • Hybrid drive power consumption: • Installed total power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Needle shut-off control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9-zone hot runner integrated • Interfaces: printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle time: 2.00 s • Noise level: 74 dB(A) • Owner’s note • Describes a hybrid high-speed machine equipped with a larger injection unit (Type 2300 vs. Type 840) than the above-mentioned stock machine. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) Pgedpfx Adjyfrb Nsyeg • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: Pedpfx Adsyfq Aljyegg • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.250 kN, premer vijaka: 45 mm, delovna prostornina: 275 cm³, tlak vbrizgavanja: 1.878 letvica, injekcijska masa: 250 g, minimalna višina orodja: 300 mm, Krauss Maffei 125-520 C2 Splošne informacije Model: 125-520 C2 Leto proizvodnje: 2004 Krmiljenje: MC4 Teža stroja: 6000 kg Dimenzije (d × š × v): 4,5 × 1,5 × 2,2 m Zaporni sistem Zapiralna sila: 125 t Sistem zapiranja orodja: 125 / … Dimenzije plošč orodja: 745 × 770 mm Razmak med stebri: 470 × 470 mm Odpiralna pot: 600 mm Maksimalna razdalja med ploščama: 900 mm Podpfjyfntusx Adyogg Višina orodja: 300 mm Izmetalna sila: 22 kN Hod izmetalca: 150 mm Vbrizgalna enota Vbrizgalna enota: … / 520 Premer polža: 45 mm Razmerje L/D polža: 20 Prostornina vbrizga: 275 ccm Masa vbrizga: 250 g Specifičen pritisk vbrizga: 1878 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 618 cm³, tlak vbrizgavanja: 2.183 letvica, injekcijska masa: 562 g, minimalna višina orodja: 400 mm, hod izmetalca: 180 mm, Engel VC 1350/200 Tech Zapiralna sila: 200 ton Leto izdelave: 2007 Teža: 14.200 kg Dimenzije (d x š x v): 6,3 x 1,9 x 2,3 m Vbrizgalna enota: .../1350 Premer polža: 55 mm Vbrizgalni volumen: 618 cm³ Vbrizgalna teža (za PS): 562 g Specifičen pritisk vbrizga: 2183 bar Sistem zapiranja orodja: 200/... Dimenzije orodnih plošč: 860 x 570 mm Montažna višina orodja: 400 mm Odpiralna pot: 750 mm Maksimalna razdalja med ploščama: 1150 mm Izmetna pot: 180 mm Izmetalna sila: 80 kN Oprema: - 2 × hidravlični jedri na gibljivi plošči - Pnevmatski ventil - 8 področij vročih kanalov Pjdpfjyfnpvox Adysgg - 8-conski rotameter

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, vpenjalna sila: 1.300 kN, premer vijaka: 55 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, injekcijska masa: 479 g, minimalna višina orodja: 300 mm, Zapiralna sila: 130 t Leto izdelave: 2008 Podpfx Adoyfnghsyjgg Teža vbrizga: 475,9 g Vbrizgalna enota 1000 Premer polža: 55 mm Specifičen tlak vbrizga: 1904 bar Volumen vbrizga: 523 ccm Teža vbrizga: 475,9 g Zapiralna sila: 130 t Dimenzije orodnih plošč: 745 x 745 mm Razmak med stebri: 470 x 470 mm Izmetalna sila: 22,6 kN Višina orodja: 300 mm Odpiralna pot: 600 mm Maksimalna razdalja plošč: 900 mm Teža: 8000 kg Leto izdelave: 2008 Krmiljenje: MC5 Oprema: - akumulator - priključek euromap 67 - 2x pnevmatski ventil - hidravlično jedro na premični plošči

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 1.500 kN, Oprema: dokumentacija / priročnik, Brizgalni stroj KM 150-700/C2 Enota za zapiranje 1. Zapiralna sila: 1500 kN 2. Velikost plošče (š × v): 780 × 790 mm 3. Odpiranje kalupa: 600 mm 4. Razdalja med vodili (š × v): 500 × 500 mm 5. Minimalna vgradna višina orodja: 300 mm 6. Izmetni hod: 150 mm 7. Vroči kanal – število uporabljenih con: 12 8. Upravljanje pnevmatskih ventilnih zatičev: 1 kos Brizgalna enota 1. Premer polža: 45 mm 2. Vbrizgalni tlak: 2336 bar 3. Največja količina vbrizga: 305 cm³ 4. Največja masa vbrizga (PS): 278 g Podpfx Aoyfm Ahjdyogg 5. Jedra: 2× hidravlični krog (BAP) 6. Polž - razmerje L/D: 22

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 2.000 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Razdalja med stebri V: 570 mm Razdalja med stebri H: 570 mm Tip: Horizontalen Pogon: Električni Pedpfxeyfh Uls Adyogg Delovne ure: 34.535

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 300 kN, Vpenjalna sila: 300 t Premer vijaka: 60 mm Razdalja med stebri V: 720 mm Razdalja med stebri H: 720 mm Tip: Horizontalen Pogon: Hibridni Pgodpfx Adsyfh Rmeysg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, ARBURG A 1500 T 1600-400 rotacijska miza (29.279 h) (S&P 3786) Leto izdelave: 2014 Obratovalne ure: 29.379 ur Polž: 35 mm Tlak brizganja: 2500 bar Vsebina brizganja: 154 cm³ Zapiralna sila: 150 t Razdalja med vodili: 1500 mm Pgedpfx Adjyff S Ujyeg Minimalna višina orodja: 400 mm Maksimalna razdalja plošč: 700 mm Mere: 4600 x 1900 x 2300 mm Teža: 11.000 kg Priključna moč: 22 kW Premer mize: 1500 mm, 2-postajna (180°) rotacijska miza, 4-kratni izvlek jedra, izpihovalna naprava, vmesnik za barvalno napravo, vmesnik HHG itd... Cena: na zahtevo Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) vklj. robot KUKA (S&P 3788) Leto izdelave: 2008 Obratovalne ure: 36.061 ur Polž: 40 HVF mm Vbrizgalni tlak: 2000 bar Vbrizgalni volumen: 201 cm³ Zapiralna sila: 150 t Razdalja med vodili: 520 x 520 mm Minimalna vgradna višina orodja: 250 mm Maks. razdalja med ploščama: 1000 mm Mere: 5100 x 1600 x 2700 mm Teža: 7.250 kg Priključna moč: 60 kW Podpfx Adjyff S Ijyogg Hidravlični akumulator, 4 x izvlek jedra, HHG vmesnik EM67, izpihovalna naprava, vključuje robotski sistem KUKA KR 5 arc, transportni trak, varnostna ograja Cena: po povpraševanju Kontaktna oseba: G. Ralf Schulz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 58.670 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Mounting platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Min. mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd./rev.: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating power: 16 kW Cylinder heater control zones: 5 Oil capacity: 489 ltr. Dimensions and weight: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration isolators - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm Pgodpfx Adoydp Idjyjg C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 68.590 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Movable Platen Opening Force: 45 kN Movable Platen Closing Force: 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Maximum Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force Forward/Return: 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electrohydraulic Equipment: Pump Motor Rated Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Control Zones: 5 Oil Capacity: 489 l Dimensions and Weights: Pedpjydp D Ejfx Adysgg Space Requirement approx.: 5.50 x 2.00 x 2.20 m Total Weight: 6600 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional Equipment: - 1x air valve - 2x core pull - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 Pgsdpfjydpvbsx Adyeg • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, injekcijska masa: 1.464 g, skupna višina: 2.500 mm, skupna masa: 25.500 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, največja dolžina izdelka: 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection molding machine from Germany features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1200 cycles/h, it is ideal for high-volume production. Contact us for further information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 Pgsdpeydnp Hofx Adyjg • Machine color: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Tie bar distance: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen size: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Moving platen opening stroke: 1400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, vpenjalna sila: 3.430 kN, premer vijaka: 60 mm, skupna višina: 2.397 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 8.073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It offers a clamping force of 3,430 kN, a screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8,073 × 1,930 × 2,397 mm, it is a robust choice for precision blank pressing. Contact us for further information about this machine. • Installed heating capacity: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 Pgodpfxeydnbpo Adyeg • Interfaces: Euromap 67, Euromap 73 Clamping Unit: • Tie bar distance: 810 × 810 mm • Platen dimensions: 1,050 × 1,050 mm • Opening stroke: 700 mm • Mold height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kN Injection Unit: • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Holding pressure: 200 MPa • Theoretical shot volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0–350 rpm • Injection stroke: 270 mm • Nozzle contact force: 39.0 kN

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 65.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.500 kN, premer vijaka: 70 mm, delovna prostornina: 1.047 cm³, Clamping force: 3500 kN Maximum mold opening force: 220 kN Moving platen drive force - opening: 105 kN Moving platen drive force - closing: 95 kN Clamping plate (W x H): 1100 x 1095 mm Clear distance (W x H): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Pjdpeydmkcefx Adyegg Opening width: 1300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 kN Injection Unit: Screw diameter: 70 mm Ls/D ratio: 20 Injection pressure: 1778 bar Stroke volume: 1047 ccm Shot weight (PS): 953 g Injection flow: 527 ccm/s Screw speed: 285 rpm Plasticizing rate: 95 g/s Nozzle contact force: 110 kN Electrohydraulic Equipment: Rated pump motor power: 75 kW Installed heating power: 30 kW Barrel heating control zones: 6 Oil capacity: 720 liters Dimensions & weights: Space requirement approx.: 6.50 x 2.20 x 2.40 m Total weight: 15,370 kg Max. mold weight: 4,780 kg Accessories: - Anti-vibration elements Additional equipment: - 1 x hydraulic core pull - 1 x air valve - Robot interface as per Euromap 12

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar clearance (h x v): 900 x 800 mm Mounting platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Maximum daylight between platens: 1400 mm Pjdpfjydbbvjx Adyogg Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil quantity: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Stanje: rabljeno, Leto izdelave: 2017, Serial no. 141342-100, control unit Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould size 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, injection/metering unit manufactured by Wittmann, type Feedmax S3-NET, yr. 2021, sprue picker/robot by Wittmann, type WP80, yr. 2020, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 Pedsyc Symspfx Adyogg This item is part of an online auction. The sale is subject to the approval of the seller.

Stanje: rabljeno, Leto izdelave: 2017, Ser.-No. 140228-100, control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle movement/force 350 mm/40 kN, injection/dosing unit, manufacturer Wittmann, type Feedmax S3-NET, year of manufacture 2017, sprue picker/robot, manufacturer Wittmann, type WP80, year of manufacture 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel, manufacturer Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 Pgodeyc Staepfx Adysg This item is part of an online auction. Acceptance of the bid is subject to the approval of the seller.

Stanje: rabljeno, Leto izdelave: 2017, Serial No. 138524-100, control system type Unilog B8, clamping force 1,100 kN, clear tie bar spacing 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, min. mould dimensions 296 x 296 mm, injection unit type 350, screw diameter 25 mm, screw stroke 175 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 85.9 - 220 cm³, specific injection pressure 1,595 - 3,000 bar, max. screw speed 350 rpm, screw torque 340 - 500 Nm, nozzle stroke/force 250 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2018, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, L 25 m, machine weight 4,800 kg, operating hours 42,853 This item is part of an online auction. Award will be made subject to the seller's approval. Pgedpsyc Sqxofx Adyog

Stanje: rabljeno, Leto izdelave: 2017, Ser.-No. 138522-100, Control unit: Unilog B8, Clamping force: 1,100 kN, Tie bar spacing (clear distance): 470 x 420 mm, Mold height (installation): 200 - 450 mm, Opening stroke: 380 mm, Max. platen daylight: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Max. mold weight: 1,000 kg, Min. mold dimensions: 296 x 296 mm, Injection unit: Type 750, Screw diameter: 35 mm, Screw stroke: 200 - 225 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Max. screw speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/force: 350 mm/40 kN, Dosing unit: Manufacturer Movacolor, Injection/Dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, year 2021, Sprue picker/robot: Manufacturer Wittmann, Type WP80, year 2021, Travel axes X/Y/Z: 100 x 550 mm x 90°, Pneumatic hose reel: Manufacturer Metabo, Type SA250, L 25 m, Machine weight: 5,200 kg, Operating hours: 36,180 Podpfx Adoyc Snkjysgg This item is part of an online auction. Awarding is subject to the consent of the client.

Stanje: rabljeno, Leto izdelave: 2017, Ser. no. 138264-100, Control system type Unilog B8, clamping force 1,800 kN, clear tie bar distance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, hydraulic/electric ejector stroke 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit manufacturer Movacolor, injection/dosing unit manufacturer Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot manufacturer Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel manufacturer Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038 This item is part of an online auction. Sale is subject to the approval of the client. Pgsdpfxjyc Sh Do Adyjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Pjdpeyc Ewxefx Adysgg Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse