Gaposa España 99 S.L.

Leto izdelave: 1989, Stanje: rabljeno, Rabljeni stroj Leto izdelave: 1989 Tehnični podatki: 4-vretenasta vrtalna glava s pritisnim obešalom, razmak: 52/5,5/32 mm 7-vretenasta vrtalna glava za vrste, razmak 32 mm s pritrditvenim zatičem vklj. nastavitev globine vrtanja vklj. podaljški za omejevalce vklj. zložljivi omejevalci Itodpfx Ajxavraoh Djn Priključek: 380 V Dimenzije: 550x750x790 mm brez omejevalcev Lokacija: Hochheim Razpoložljivost: takoj

Leto izdelave: 2025, Stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Itsdpfxow Nafko Ah Den Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate

Leto izdelave: 2025, Stanje: novo, New machine Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) Itsdpfx Aewx Aadsh Den closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Leto izdelave: 2025, Stanje: novo, New machine Year of manufacture: 2025 - Robust, space-saving double wide-belt sander for demanding applications - Consistent working height due to top adjustable section - Working width: 1350 mm - Maximum passage height: 205 mm (up to 18.5 kW main drive motor) - Sanding belt size: 1350 x 2000 mm 1st Unit “R” Contact Roller - Fluted rubber contact roller, hardness 80 Sh - Contact roller level infinitely adjustable via touch screen - Motorized lifting/lowering of the contact roller according to aggregate selection 2nd Unit “Ed-L” Diagonal Sanding Pad - Entire sanding unit can be tilted by 10° - Electronic sanding pad with 22 mm segment width (pivoting special version), with variable edge pressure, automatic pressure regulation, and storage of sanding pad segments - Infinitely variable sanding belt speed (with PLC memory storage)* - Additional sanding pad insert Main Motors - 1st unit: 18.5 kW (25 HP) / 400 V/50 Hz - 2nd unit: 11 kW (15 HP) / 400 V/50 Hz Workpiece Feed - Fabric-reinforced rubber feed belt - Rubber-coated feed belt drive roller - Motor: 2.2 kW (3 HP) / 400 V/50 Hz - Speed: infinitely adjustable 3 - 15 m/min Vacuum Device - On feed table - Additional perforated area of feed belt over 200 mm - Vacuum generator: 2.2 kW (3 HP) / 400 V/50 Hz Sanding Belt Cleaning - Air knife for cleaning the sanding belt of the 2nd unit “Ed-L”, automatically activated, with extraction channels and powered by the vacuum generator from the vacuum table using vacuum return air including diverters Pressure Elements - Infeed: parallel spring-loaded, ground steel pressure roller Ø 50 mm - Between units: rubberized pressure roller Ø 50 mm - Outfeed: rubberized pressure roller Ø 50 mm Standard Equipment - Motorized, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking and oscillation, approx. 4 l/min compressed air consumption - Optimal safety via automatic immediate stop with disc brake in case of belt breakage, etc. - Complete electrical system with contactor controls; automatic star-delta start of the main motor, motor protection and ammeter for monitoring material removal - Automatic thickness adjustment across the full working width - Workpiece over-thickness protection with immediate feed stop and automatic lifting - Electronic compensation for abrasive belt grit size - Infinitely adjustable stock removal - Electronic feed speed control at the operation panel, infinitely adjustable 3 - 15 m/min - PLC control/programming with color touch screen and TEACH-IN memory (one-touch operation according to sanding result, i.e., no manual input required) - Pneumatic feed belt tracking control - Workpiece support rollers at infeed and outfeed - ENORMATIC: Fully automated quick setup and feed release - eco*-energy saving mode - Error diagnostics - Order and operating hours counter, square meter counting, and belt wear visualization Itedpfx Ahswt E Utj Djn - High-quality, swiveling plexiglass control panel with LAN and USB connection - 10'' touch screen with Industry 4.0 control - Prepared for automatic damper control of extraction per aggregate Machine supplied ready for operation in LACKZWISCHENSCHLIFF (intermediate lacquer sanding) version (1350-REd-L) Additional equipment for “LACKZWISCHENSCHLIFF” version on the 2nd unit: - [Please specify additional features if needed]

Leto izdelave: 1971, Stanje: rabljeno, številka stroja/vozila: 37919, Bench Drilling Machine / IXION BST 13 Drilling Machine Year of Manufacture: 1971 / Serial No.: 37919 Itodpfx Ahoupy Tto Don Technical Details: Dimensions: 220 x 400 x 820 mm Weight: 50 kg Online video inspection possible via Skype. We would be pleased to welcome you for a visit – more machines available from stock. Available immediately – inspection possible. Located at our warehouse in Emskirchen / Nuremberg – machine can be tested on site.

Stanje: rabljeno, Mini excavator Online video inspection via Skype We would be pleased to welcome your visit – more machines available in stock Available immediately – ready for inspection Located at Emskirchen / Nuremberg – test run possible Itodpfet Drmhox Ah Den

Stanje: rabljeno, številka stroja/vozila: 19013, Kombinierte Kopierfräsmaschine - Drehmaschine MICHÄL KÄMPF Online-Video-Inspektion per Skype-Video möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Itsdpfx Ajh Axryjh Djn Lagerstandort: Emskirchen bei Nürnberg – Vorführung/Test vor Ort möglich

Leto izdelave: 1982, Stanje: rabljeno,

Leto izdelave: 2003, Stanje: rabljeno, Trade-in received: PBT 25 PC 200 machine – genuine like-new condition! The hour meter reads just 622 hours! The photos speak for themselves. JWV Service is the importer for the Netherlands and Belgium of PBT profile bending machines and is also a dealer for, among others, Meba bandsaws, Faccin plate rolling machines, and various other brands. The JWV Service team possesses over 25 years of experience in troubleshooting and overhauling metalworking machinery. Visit our website for more machines. Iodjf Rih Dopfx Ah Dstn

Leto izdelave: 2016, Stanje: rabljeno, Various aluminium saw machines in stock Iodpef Rihvefx Ah Detn