MARSHALL Ablakgyár Kft.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 19500484, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 50.000 h, Stroj je še vedno v uporabi, prodajamo ga zaradi prihoda novega stroja. Dkodpoy Nzbujfx Apljl Stroj se prodaja poceni, ker potrebujemo prostor — cena je nujna.

Stanje: rabljeno, Leto izdelave: 2012, No. 3268 Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" Used, year of manufacture 2012 Comprising: - Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" - Steel Cutting Automatic Saw Schirmer SZA 450 - Buffer Screwing Station Schirmer - Bar Processing Center Schirmer SBZ I Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" - Cutting length 300 – 3900 mm - Automatic feed magazine for 9 profiles up to max. 6500 mm length - Automatic transfer station - Feed device for PVC profiles up to 6500 mm length with NC-controlled gripping clamp, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Processing station designed as a G-Module "Ultra Speed" Processing operations on PVC profiles: - Drainage and ventilation slots/holes in frame, sash, and transom profiles, handle hole drilling for front doors, striker plate markings, lock case milling - Height measuring device to detect profile tolerances - Gasket cutting device - VU saw unit with twin saw aggregates 2x 45° - Standard saw unit with 1 saw aggregate, swiveling range +45° to -45° - Conveyor belt for waste disposal - NC-controlled gripping clamp for bar outfeed, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulating buffer for transferring profiles to the steel insertion station and screwing station for steel insertion station with 8 insertion slots - Monitor for steel length display - Automatic label printer Steel Cutting Automatic Saw Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 – 50 mm, profile height 15 – 60 mm, wall thickness max. 4 mm - Feed device - Standard saw unit for 90° cuts - Automatic bar outfeed - Belt conveyor - Discharge device - Steel remnant processing - Steel length measurement in the steel loading magazine Buffer Screwing Station Schirmer - Feed device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel insertion fingers for reinforcement profiles up to 200 mm insertion depth Bar Processing Center Schirmer SBZ I - Feed device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Probe for automatic determination of zero point at the profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, 1 axis X-feed - NC-controlled gripping clamp for bar outfeed - Special version belt conveyor for transverse discharge - Lock part visualization software including monitor - Screw station with screw feeding - Helmet rail with balancer for bar screw unit - Bar screw unit with automatic screw feeding System performance: Approx. 120 window units 1400 x 1500 mm / 8 hours If the machine is upgraded with an additional screw unit at the buffer screwing station, the output increases to approx. 160 units / 8 hours Dksdpfx Asy Nnnnoplel Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. For used machines, any warranty is excluded; sold as seen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, CENTRE D'USINAGE DE BARRES Federhenn SBZ 150 G, type 81.25K150, pour l'usinage de barres profilées coupées avec armature acier insérée. La machine se compose principalement de : BÂTI PRINCIPAL en construction acier soudée robuste 1x MODULE LINÉAIRE avec pince de préhension pour le positionnement précis des barres à usiner ARMOIRE ÉLECTRIQUE contenant tous les composants électroniques et pneumatiques, équipée d'unités de perçage pour les opérations suivantes : - Perçage de trous de chevilles Dodpfx Asy Dtg Eeplokl - Perçage de trous de traverses - Perçage de trous de fixation PINCE DE SORTIE montée sur un axe linéaire pour déposer les barres sur un module de transfert transversal MODULE DE SORTIE pour profils via un convoyeur à courroie issu de la machine SBZ. Les barres sont retirées manuellement en fin de convoyeur, avec contrôle de présence en bout de table. Longueur standard du module : environ 3 000 mm PROTECTIONS DE SÉCURITÉ MAGASIN À VIS et visseuses externes

Stanje: potreben popravila (rabljeno), Leto izdelave: 2000, Na prodaj rezalno-obdelovalni center Elumatec model SBZ 610. Stroj je bil preizkusno zagnan. Potrebuje obnovo. Dksdpfxey Avyle Aplol

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Popolnoma avtomatski CNC rezalni center CAT500 Stroj je delujoč in pripravljen za uporabo premer rezila: 500 mm Dkodpfx Asx Ez Igeplel koti rezanja: -45°/90°/+45° operaterska konzola z Windows smer dela z desne na levo odsesavanje ostružkov transporter za odpadke tiskalnik etiket

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, STOCK MACHINE: Working direction from left to right – Subject to prior sale – Dksdpfx Ajxft I Aoplel HECHT Exenso Profi Saw Cutting Center ESA-9 comprising: Infeed: - Robust aluminium construction using proven profile design - Ergonomically adjustable working height from 985 to 1055 mm - Raw bar length min. 400 mm up to max. 6,000 mm (extension kit for up to 6,500 mm available as an option) - Material feed via chain conveyor for automatic loading of 9 compartments - Working direction from left to right Profi Cut Saw: - Bandsaw automation with pneumatic clamping system, consisting of 3 clamping units - Infinitely adjustable saw feed via hydraulic unit - Workflow controlled via Exenso control system - Sawing area secured with a front-facing light curtain - Bandsaw operation: 1.5 KW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in normal operation 15–110 m/min - Cutting area: Width 10–120 mm, Height 10–80 mm Outfeed: - Robust aluminium construction in proven profile design - Ergonomic removal height from 760 to 820 mm (Note: not adjustable separately from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit over three levels onto a sloped receiving table - Maximum part length for automatic outfeed: 3,500 mm (extension kit for up to 4,500 mm working length available as an option) - Waste disposal via ejection unit – max. length 600 mm - Waste drops via chute into customer-provided waste container (Note: waste container not included in delivery) - Remnant piece marking at the deposit position, marked for manual loading by the operator Software / Data interface: - HECHT Software Exenso ESA (version indicated after joint preliminary inspection) Operation: - Reinforcing steels are loaded by the operator onto the feed magazine in the infeed according to instructions/indications. - Data transmission via integrated data interface from customer's window manufacturing software specifying the required PVC cut lengths for the center - Steel is fed and conveyed automatically - Optimized cutting to specified length - Transfer of steel to removal position in the outfeed - Optional double cutting possible after verification Scope of delivery: - Bandsaw - Infeed - Outfeed - Light curtain - Control system with Win 10 and 15'' touchscreen - Data interface REST API can be adapted to an existing cutting center upon review - System is disassembled into several packages for transport incl. 540.1082 1 pc. Safety fence wall connection set with door switch ESA/SSA, suitable for right and left use 723.5011 1 pc. M42 bandsaw blade 3320x27x0.9, 12–16 teeth, fine 942.5541 1 pc. Minimal quantity lubrication for ESA & SSA saw systems, noticeable increase in bandsaw blade life Includes: minimal quantity lubrication nozzle, 1 l lubricant, bracket for lubricant, filter for contamination protection 829.0201 1 pc. Buffer monitor for steel terminal ESA/SSA, additional display

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 25019, Funkcionalnost: popolnoma funkcionalen, Rezkalno in obdelovalno središče STUERTZ STBAZ-IPT 40000-S-V Rabljeno, letnik 2000 Popolnoma avtomatsko CNC žagalno in obdelovalno središče za PVC plastične profile, mehansko v zelo dobrem stanju glede na starost. Dodpfxew Edyfs Aplokl Operacije: žaganje, obdelava, avtomatsko vijačenje ojačitev, vrtanje čez jeklene ojačitve, tiskanje nalepk. Baza podatkov z Gealan, Rehau in Aluplast profili. Na voljo dokumentacija, dodatne fotografije in video posnetek. Opravljamo montažo in zagon stroja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Maximum profile width: 140 mm Maximum profile height: 190 mm Maximum bar length: 6,500 mm Drilling units: 2 Number of milling spindles: 3 Suitable for aluminium Number of clamps: 4 Maximum feed rate: 65 m/min Infinitely variable feed Automatic loading: Yes CE marking Dksdsm H Ud Uspfx Aplsl CE Declaration of Conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Dkjdpfx Apemzbr Selol Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2026, AUTOMATIC STEEL CUTTING MACHINE with ONLINE PC CONTROL 350 Fully automatic steel cutting machine for processing reinforcement steel, suitable for single or double cuts depending on requirements. Optimized cutting with scrap length management. The system comprises an automatic loading magazine with 12 slots, a steel saw, and a belt conveyor for the discharge of cut steel profiles. Scrap lengths are sorted by length and transported to a scrap length bin, discharge area, or waste bin. Processing of the steel profiles occurs in continuous operation; the steel bar is precisely positioned by a transport clamp with linear motor and rotary encoder. The saw cuts from above, with a micro-dosing cooling and lubrication system ensuring optimal cooling of the saw blade. The profile clamping is pneumatic, independent of the profile cross-section. A free-standing system with PC control, or in combination with a cutting machine, plastic machining center (BAZ), or profile machining center (SBZ). When combined, the cycle is synchronized with the cutting machine, BAZ, or SBZ. Profile lists for loading into the magazine are displayed to the operator on a TFT monitor. The finished, processed steel profiles are removed from the belt conveyor, acknowledged, and sorted into wagons, or manually inserted into PVC profiles at the steel insertion station. Dkjdpscmqkmsfx Aplsl New system: 10 weeks delivery time