TECHJET Sp. z o.o.

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje 4000 x 2000 mm Navpični pomik 250 mm Nwsdpfx Aszgaq Tjqqoh Maksimalna debelina 80 mm Krmiljenje: Osai 10/510 ANL Črpalka: Streamline SL-V 50

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 17.410 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400149, FLOW Waterjet Machine INTEGRATED FLYING BRIDGE We are selling our Flow waterjet machine, including a stainless steel water tank, a 6000 bar pump, sand and abrasive feed system. The sand filter (wastewater treatment) is optional and not included in the price. The machine has been in operation with us since 2008 and is being replaced by a new purchase. The machine is in very good condition, fully functional, and can be inspected at any time. Manufacturer: Flow International Corporation, 1635 Jeffersonville, Indiana 47130, USA Year of manufacture: 02/2008 Model/Type: IFB INTEGRATED FLYING BRIDGE Serial No.: 400149 Transport dimensions: Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank size: Length: 425 cm Width: 255 cm Cutting area: Nwsdpfjza A Ayex Aqqeh Length: 365 cm Width: 182 cm Datasheets for the machine, pump, and software are available (PDF on request). Inspection before purchase is possible and encouraged. Delivery upon request. Sale as is, as shown in the photos.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 480 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 260 mm, vrsta vhodnega toka: trifazni, maks. debelina aluminijaste pločevine: 260 mm, obratovalni tlak: 4.150 letvica, leto zadnje generalne obnove: 2025, moč: 22 kW (29,91 KM), Flow Mach 200 Waterjet Cutting System For sale is a very well-maintained Flow Mach 200 waterjet cutting system, year of manufacture 2021, with extremely low operating hours—only approx. 500 hours. The machine was used exclusively for single-piece and small-batch production, not operated in multi-shift use, and was regularly serviced by Flow. Technical data: – Working area: approx. 4,000 × 2,000 mm – Z-axis: approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure: 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing aid – Laser edge finder – ecoFlow abrasive manual sludge removal – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL, among others. Nsdpfx Aqoy Urzisqjwh Special features: – Very low wear due to minimal operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for use Asking price: €115,000 net Inspection by appointment possible. Further pictures and information available on request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, trajanje garancije: 24 meseci, tlak črpalke: 4.000 letvica, moč: 30 kW (40,79 KM), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Nwodpfx Aoy Umhkjqqjh Fully refurbished with manufacturer certification and two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series with bridge design represents state-of-the-art technology combined with reliability, durability, and maximum resilience. Quiet and low-emission operation together with easy PC-assisted control for push-button precision make this series ideal for use under the toughest industrial and workshop conditions, whether in single-shift or 24/7 continuous operation. Equipment • Enclosed measurement system • Digital drives • Brushless servomotors • Precision linear guides, surface-hardened • Gantry (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Standard practical water level regulation • Ergonomic mobile control panel • IntelliMAX Premium control software • Highly precise 5-axis TiltaJET kinematics • Up to ±0.02 mm accuracy • Software and machine components according to the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ±0.02 mm. The tilting head automatically compensates for kerf angle errors at the cut edge, regardless of the selected quality or cutting speed. The configuration of the waterjet cutting system is freely selectable. The system can be expanded with a wide range of accessories tailored to your cutting requirements. Feel free to contact us and let us know your configuration needs. If desired, financing via leasing under very attractive conditions is available—for example, up to 86 months. The machine is fully refurbished, so illustrations may differ from the actual unit offered. Prompt delivery can be arranged with INNOMAX AG.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 203 mm, delovna dolžina: 3.200 mm, delovna širina: 1.575 mm, Tehnični podatki izhajajo iz proizvajalčevih navodil. Prodajalec zanje ne prevzema nobene odgovornosti! Nwsdpfjy Slqxex Aqqeh TEHNIČNE PODROBNOSTI Delovno območje X-os: 3.200 mm Delovno območje Y-os: 1.575 mm Pomik Z-osi: 203 mm Velikost mize: 3.658 x 1.956 mm Maksimalna obremenitev materiala: 1.950 kg/m² Hitrost: 4.572 mm/min PODROBNOSTI STROJA Električni priključek: 3-fazni, 380–480 V AC ±10 % Frekvenca: 50–60 Hz Linear natančnost pozicioniranja: ±0,025 mm Ponovljivost: ±0,025 mm Ballbar krožnost: ±0,064 mm Dimenzije in teža Tloris s krmiljenjem: 5.715 x 2.794 mm Teža, prazen rezervoar: 2.812 kg Višina z visokotlačnim cevovodom s škarjami: 2.921 mm Obratovalna teža: 10.545 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 2.795 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400873, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, moč črpalke: 2.200 W, najv. debelina jeklene pločevine: 120 mm, Stroj je bil obnovljen leta 2026 in servisiran na vsakih 500 delovnih ur! TEHNIČNI PODATKI Delovno območje X-os: 1.500 mm Delovno območje Y-os: 1.500 mm Rezalna zmogljivost jekla: 120 mm (priporočeno: 60–80 mm) Rezalna zmogljivost aluminija: 120–200 mm Rezalna zmogljivost plastika, kamen itd.: neznano PODROBNOSTI O STROJU Moč črpalke: 22 kW (30 KM) Zadnja obnova črpalke: pred 3 delovnimi urami Dimenzije stroja (D x Š x V): 2.500 x 1.900 x 1.500 mm OPREMA Njdpfjy Nmtvjx Aqqewh Rezervni deli Računalnik Sistem za mehčanje vode

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, WJS Vodni curek T-Model Advanced Nwodey Epb Njpfx Aqqeh Sistemska oprema stroja: T-Model NCT 30 Flying Bridge, rezalna miza 3 x 2 m Visokotlačna črpalka: BFT Ecotron 4037, 50 KM / 4000 BAR Rezalna glava: WJS-Basic rezalna glava Sistem za odstranjevanje abraziva: WJS-Standard

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.400 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, Naprodaj je vodni rezalnik MicroStep WaterCut 2001.30W v odličnem stanju, letnik 2023. Stroj je opremljen z visokotlačno črpalko BFT Ecotron 40.37 – 4000 bar in 37kW, eno izmed najbolj zmogljivih in zanesljivih črpalk na trgu. Glavne tehnične specifikacije: - Delovno območje: 2000 x 3000 mm - Rezalna glava: 3-osna z antikolizijskim senzorjem - Skupne delovne ure: pribl. 1400 h Stroj se prodaja kot popoln, za uporabo pripravljen paket, vključno z: - 1-tonsko dozirno enoto za abraziv (Allfi) - Avtomatski sistem za odstranjevanje mulja (sistem čiščenja rezervoarja) Nodsy Ecr Hspfx Aqqewh Ta oprema omogoča takojšen zagon proizvodnje brez dodatnih investicij. Stroj je na voljo takoj.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.000 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000 x 1500 mm High-pressure pump Ecotron 40.37, year 2013 Water softening unit, year 2018 --> as new Abrasive backflushing system, year 2013 ABUS pillar jib crane, 2t, year 2018 --> as new Devo-Tech vacuum lifting system, load capacity 1800 kg --> as new Various accessories, several sandbags The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet unit and pump were completely overhauled by the supplier at the time. Unfortunately, the cutting unit has seen very little use in our facility. It was only operated for a few hours per year. It has not been used since around July 2025. The high-pressure pump has a defect. It is not sealing properly and is leaking water. Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, pump repair would cost approx. CHF 5,000.– to 6,000.–. The crane and vacuum lifting system can also be purchased separately. Please submit your offer with price expectations. The original new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. Nwedpfx Aoyq Rdyjqqoh The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please send inquiries or offers by email only, not by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 59 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S15085092, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 800 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, pritisk: 2.000 letvica, Stroj za rezanje z vodnim curkom formata 1500x800 mm, nov vgrajen s strani proizvajalca julija 2023. Zelo malo uporabljen (manj kot 60 ur). Možnost financiranja za kupca. Njdpoyprq Eofx Aqqowh

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, nosilnost: 15 kg, Popolnoma delujoča vodna rezalna naprava (letnik pribl. 2001) z robotom KUKA KR15 s šestimi osmi. Naprava deluje s čistim vodnim rezanjem (brez abrazivnih dodatkov) in je trenutno še vedno v uporabi za obdelavo plastičnih delov. Offline programiranje, možna predstavitev. Vključuje črpalko KMT Streamline (15 KM). Kompleten sistem z avtomatskim odpiranjem in zapiranjem vrat. Za več informacij nas kontaktirajte! Nwodsyl Niqepfx Aqqeh

Stanje: zelo dobro (rabljeno), Za prodajo je stroj za rezanje z vodo Trumpf Waterjet: Ima Trumpf mehaniko in novo elektroniko: nov upravljalni panel z novimi AC servo motorji; programska oprema za vodenje Mach 3 Water Jet; dimenzije delovne mize: 2,5 m x 1,25 m. Možna je nadgradnja s tehniko plazemskega rezanja, tako da se lahko stroj uporablja tako za rezanje z vodo kot s plazmo. Nsdpfx Asyghfaeqqowh Stroj je možno preizkusiti v našem podjetju. Ponujamo tudi možnost prodaje črpalk za waterjet.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, natančnost ponavljanja: 0,05 mm, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 250 mm, natančnost pozicioniranja: 0,05 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, dolžina mize: 4.150 mm, širina mize: 2.080 mm, pritisk: 4.150 letvica, hitrost pozicioniranja: 15.000 m/min, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, Naprodaj je vodni rezalni stroj CMS Smartline 2040, izdelan leta 2023, v odličnem stanju s samo 200 delovnimi urami. Stroj je bil zelo malo uporabljen in je tehnično ter vizualno v vrhunskem stanju. Tehnične specifikacije: Proizvajalec: CMS Model: Smartline 2040 Leto izdelave: 2023 Delovne ure: 200 h Delovno območje (X × Y): 4000 × 2000 mm Hod osi Z: 250 mm Rezalna glava: 3-osna Črpalka: Easypump 30 HP (22,5 kW) Maksimalni tlak: 4150 bar Sistem za dovajanje abraziva: rezervoar 270 kg CNC upravljanje: OSA Open Nwedpfx Asydpmgeqqeh Stanje stroja: Zelo dobro / kot novo Ta stroj je odlična izbira za podjetja, ki želijo vstopiti v področje vodnega rezanja ali povečati kapaciteto brez vlaganja v popolnoma nov sistem. Stroj se prodaja v kompletu z zračnim kompresorjem, ki je vključen v obseg dobave.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, x-axis travel: 4216.0 mm y-axis travel: 2007.0 mm z-axis travel: 305.0 mm CNC control Table size: 4902.0 x 2134.0 mm Max. workpiece weight: 1465 kg/m² Machine weight: approx. 2500 kg Total power requirement: 30 kW Space requirement: approx. 5486.0 x 3708.0 mm Nedpfx Aqeyclvneqewh The compact bridge-style waterjet cutting machine features a torsion-resistant steel frame with a specialized, durable anti-corrosion coating. Both X axes and the particularly elevated Y axis utilize the maintenance-free Intelli-TRAX drive system, specifically developed by OMAX to meet the unique demands of waterjet cutting applications. Equipment: - Motorized Z axis - Water level control - Abrasive feed system with AFS 1000 abrasive delivery unit - High-pressure system made of special stainless-steel tubing - MAXIEM direct pump M4050 - OMAX PC control software Intelli-MAX for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the 5-axis A-Jet taper compensation head - Height sensor for the 5-axis A-Jet cutting head - Laser pointer for positioning assistance - Automatic sludge removal system MBM ASAS-ME - Compressed air injection for the automatic sludge removal system MBM ASAS-ME - Clamping and fixturing set for sheet and workpiece securing - Catch grate in the cutting tank - Sensors for automatic process monitoring - Water treatment via water conditioning system, including water analysis - Omni-Start (Vacuum Assist) piercing aid for brittle and laminated materials

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 8.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 178 mm, dolžina mize: 4.000 mm, širina mize: 2.000 mm, hitro pomikanje X-os: 12.700 m/min, hitri pomik os Y: 12.700 m/min, hitri pomik na osi Z: 12.700 m/min, 💧 FLOW MACH 4 4020 – 5-osiowa wycinarka wodna (waterjet) Rok produkcji: 2015 Obszar roboczy: 4000 × 2000 mm (4 × 2 m) Głowica tnąca: 5-osiowa (XD / głowica do cięcia ukośnego z kompensacją stożka) Godziny pracy pompy: ok. 9 000 h Stan: Bardzo dobry Serwis: Regularnie serwisowana, w pełni sprawna 🔧 Opis maszyny Nwodpoyaiqqofx Aqqjh Flow Mach 4 4020 to wysokowydajna przemysłowa wycinarka wodna przeznaczona do wymagających zastosowań produkcyjnych. Wyposażona w 5-osiową głowicę tnącą (XD), umożliwia dynamiczne cięcie ukośne, kompensację stożka oraz realizację skomplikowanych geometrii 3D, co czyni ją doskonałą do precyzyjnych i zaawansowanych aplikacji. Pomimo wieku, maszyna znajduje się w znakomitym stanie technicznym, regularnie profesjonalnie konserwowana. Wszelkie przeglądy wykonywane zgodnie z harmonogramem, co gwarantuje stabilność pracy i długotrwałą niezawodność. ⚙️ Najważniejsze cechy • Obszar roboczy: 4000 × 2000 mm • 5-osiowa głowica XD – cięcie ukośne i kompensacja stożka • Sztywna rama portalowa zapewniająca wysoką dokładność • Przemysłowy sterownik CNC • Do cięcia metali, kamienia, kompozytów, szkła i materiałów technicznych 💦 System wysokociśnieniowy • Czas pracy pompy: ok. 9 000 godzin • Pompa oraz elementy wysokociśnieniowe serwisowane zgodnie z zaleceniami producenta • Stabilne ciśnienie i pewność cięcia ✅ Stan & konserwacja • Maszyna w bardzo dobrym stanie ogólnym • Regularna obsługa serwisowa podczas eksploatacji • Brak zaległych napraw • Gotowa do natychmiastowej produkcji 🎯 Podsumowanie Flow Mach 4 4020 to zadbana, sprawdzona wycinarka wodna do zastosowań przemysłowych z zaawansowaną 5-osiową głowicą tnącą. To doskonały wybór dla firm poszukujących niezawodnej maszyny precyzyjnej bez konieczności inwestowania w nowy sprzęt. 📩 Skontaktuj się z nami po szczegóły techniczne, zdjęcia lub dopasowaną ofertę handlową. Wyposażenie w zestawie: - Podajnik ścierniwa - Specjalne narzędzie do demontażu cylindrów pompy (FLOW hydraulic wrench) - Zestaw części zamiennych Maszyna jest w pełni sprawna, ma niskie przebiegi i jest gotowa do pracy od zaraz. Idealny wybór dla firm poszukujących niezawodnego systemu do cięcia wodą, z dużą powierzchnią roboczą i kompletnym wyposażeniem.

Stanje: novo, Leto izdelave: 2026, New installation from one of the world's largest manufacturers, Dardi International / Flying Bridge version, 4x2 m cutting area, 2-D, linear guides with ball screw drives on all 3 axes, Yaskawa motors with controllers. Njdpfx Aex Ig Sieqqewh Delivery time approx. 6-8 weeks, available directly in our showroom in Elsenfeld with the following features: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine equipment: - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control (Windows 11) - IGEMS 2-D CAD/CAM programming system including automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotary union - Automatic central lubrication - High-pressure supply via fixed profile and shut-off valve - Allfi® abrasive conveying system, 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, steplessly adjustable, pneumatic-free - KEYENCE light barriers for CE compliance - IGEMS and operator training, as well as on-site installation, available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high-pressure pump - Aqualon High Pressure Pump AQRO S50c 37 kW / 3.8 l/min Optional manual swiveling head available at extra charge (see pictures).

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, SMARTLINE 2040 Letnik izdelave 2026 – na voljo od maja 2026 Demonstracijski stroj – kot nov Premiki osi: X-os: 4.000 mm Y-os: 2.000 mm Z-os: 150 mm Oprema: - 1x 5-osna rezalna glava z avtomatsko kompenzacijo kota - Merilnik višine z nadzorom proti trkom - Programska oprema IGEMS - Rezervoar za abraziv in avtomatsko doziranje abraziva Nwedpfxsxxldcs Aqqoh Visokotlačna črpalka Jetpower EVO Skupna poraba energije: 29 kW Električni priklop: 400 V +/- 5% / 50 Hz Maks. tlak vode: 4.100 bar Pretok vode: max. 2,8 l/min Vključno z montažo, usposabljanjem in garancijo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 714000-1, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, dolžina mize: 7.000 mm, širina mize: 2.000 mm, moč: 36,77 kW (49,99 KM), Flow Waterjet 714000-1 Leteči most 7x2 metra Letnik 2010 60.000 PSI Nwsdpfx Ajxwtu Teqqeh 9.000 ur Kompleten in dobro delujoč Različni obrabni deli kot so cevi in dodatne šobe Lijak za abraziv Podajalnik abraziva Takoj na voljo Rezanje z vodnim curkom Flow waterjet, Flowcut, rezanje z vodnim curkom, OMAX, CNC, plazma, Hypertherm, laser, fiberlaser, Bystronic, Amada, Trumpf, Accurl, Bodor, HSG, JQ, Nukon

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 5.900 h, Funkcionalnost: popolnoma funkcionalen, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced in 02.2026, inspected and operational, Maximator JET certificate Availability: in 4 weeks Cutting Table Year of Manufacture: 2019 Cutting Table Operating Hours: 5,900 h • Effective cutting area 2,000 mm (gantry) x 1,000 mm • CNC Z-axis clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • NUM CNC control • Rittal electrical cabinet on casters • Operator PC with LED monitor, splash-proof keyboard & mouse • Waterjet software SmartCut powered by IGEMS, subscription-based • Handheld control unit • Positioning laser • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • 1,200 kg abrasive storage hopper with automatic pressure feed system • High-pressure piping on axes up to cutting head • Safety system with light barriers • Water tank with heavy-duty lamella support • Stop edge on X and Y axes Nodpfxjxvqvfs Aqqswh • Precision wedge shoes as machine feet • Warranty: 1 year or 1,200 operating hours • High-pressure pump HYTRON 40.30, 30 kW, year 2006, 28,852 h, retrofit 10.2025 with warranty, new pulsation damper with TÜV certificate Technical data and prices subject to change and errors. Prior sale reserved.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Teknisk specifikation Modell: OptiMAX 80X Arbetsområde (X × Y): 4 267 × 2 032 mm Z-axel (höjd): 305 mm, motoriserad Maskinens fotavtryck: ca 7 925 × 3 937 mm Höjd: ca 3 050 mm Vikt (tom): ca 4 150 kg Max materialbelastning: 1 950 kg/m² Strömförsörjning: 3-fas, 380–480 V, 50–60 Hz Bullernivå: < 80 dBA (vid nedsänkt skärning) Hastighet (X-Y): upp till 8 890 mm/min Noggrannhet: ± 0,025 mm Repeterbarhet: ± 0,025 mm Cirkularitet: ± 0,076 mm Pump Typ: EnduroMAX 50 HP Tryck: upp till 60 000 psi (≈ 4 100 bar) Flöde: ca 4,5 l/min (beroende på munstycke) Nodpfxjxm Rigj Aqqowh Driftsäker, energieffektiv och byggd för lång livslängd Utrustning & Tillval TiltaJet skärhuvud för vinkelkompensering– ger raka snitt utan efterbearbetning SRS (Solids Removal System) för automatisk borttagning av slipmedel och partiklar Säljs enbart inom Sverige

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, model 4060D, including: 2. Machine details: - NC 4060 D (duplex with 6 abrasive cutting heads) - 1 x Cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeat accuracy (X/Y): +/- 0.05 mm - X-axis feed rate: 10,000 mm/min Nedsxgumcspfx Aqqswh - Y-axis feed rate: 10,000 mm/min - Z-axis feed rate: 4,000 mm/min Technical data: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control features: • 15-inch color flat screen (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal softkey interface • Slim control panel with QWERTY keyboard • 40 GB program memory (hard drive) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held controller (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads, mounted on holders (2 x 3 pcs) – 6 x SM 3000 abrasive dosing units – 1 x IGEMS Standard or Professional – 1 x Documentation – 2 x abrasive storage tanks with 1,500 l capacity – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new cutting tank made of stainless steel (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS staff Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Air connection: 600 l/min Compressed air (technically dried): 6.5 bar

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 250 h, Funkcionalnost: popolnoma funkcionalen, 1.1 TECHNICAL DATA 1 x Waterjet Cutting Machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet Cutting Head for AWJ Abrasive Waterjet Cutting 1 x Fixed Cutting Head for AWJ Abrasive Waterjet Cutting 2 x SM3000 Feed Units 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling Unit with Control Cabinet 1 x Hose Reel with Spray Nozzle 1 x Tool Kit 1 x Machine Zone Guard 1 x PanelOne HMI Operating Interface "EDGECUT" 1 x Remote Control for High-Pressure Pump 1 x Remote Maintenance 2 x Diaphragm Pumps and 2 x Extraction Units 1 x Waste Container 1000 l 1 x Pressure Vessel 200 l or 2-Ton Online Abrasive Conveyor/Online Abrasive Tank 1 x Head Protection Package (Zero Point Probe 1) 1 x IGEMS 5X-CAM 1 x MPG, Portable Handheld Control Device 1 x Rotary Unit SS (Chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table Size (W x D): 4200 x 2275 mm - Machining Area (W x D): 3980 x 2010 mm - X-Axis Travel 2D: 3530 mm - X-Axis Travel 3D: 3220 mm - Y-Axis Travel 2D: 2010 mm - Y-Axis Travel 3D: 1405 mm Nwjdpfxoxgua As Aqqjh - Z-Axis Travel: 250 mm - Positioning Accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid Traverse X: 30,000 mm/min - Rapid Traverse Y: 15,000 mm/min - Rapid Traverse Z: 5,000 mm/min - Minimum Distance between Nozzles: 450 mm - Maximum Distance between Nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical Connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic Supply Volume (incl. Pressure Vessel): 500 l/min • Pneumatic Supply Pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP Pump Data: - KMT 50, Jetline, 4100 bar - 37 kW, Circuit Breaker at 400/50 Hz, 80 A CAD/CAM Software: - IGEMS Professional

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10046216, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 150 mm, dolžina mize: 4.000 mm, širina mize: 2.000 mm, TECHNICAL DETAILS Travel paths X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: approx. 150 mm Cutting area Cutting range: 4,000 mm x 2,000 mm Max. cutting pressure: 3,800 bar Control system: Bystronic CNC control Nsdpfx Aqswy Nm Heqewh MACHINE DETAILS Pump type: High-pressure intensifier pump Drive system: High-speed linear drives Material capability: Cuts almost all materials Cutting process: Pure water or abrasive waterjet cutting Table type: Stainless steel slat cutting table Weight: 13,000 kg EQUIPMENT High-pressure pump unit Water filtration system Operator console with control panel Safety enclosures and light barriers Operating manuals + software CD-ROMs Documentation

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 4.428 h, Cena: Na zahtevo - Leto izdelave: 2003 Nsdpfx Aswnidheqqjwh - Dokumentacija na voljo: Da - CE označba prisotna: Da - CE certifikat prisoten: Ne - Obratovalne ure: 4428 - Krmiljenje: CNC - Moč [kW]: 37,0 - Delovni tlak [bar]: 4137 - Pomik po osi X [mm]: 6500 - Pomik po osi Y [mm]: 3300 Finančne informacije DDV: Naveden cena je brez DDV DDV/obdavčitev po razliki: DDV odbiten za podjetja Dostava in odkup (staro za novo) možna kadarkoli za vse industrijske stroje Lukas van Rossum

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 18.600 h, Funkcionalnost: popolnoma funkcionalen, tlak vode: 4.000 letvica, Vodni rezač FLOW MACH 3 Godina proizvodnje: 2013 Radna površina: 3000 x 2000 mm Radni sati: 18.600 Prednost stroja DWJ – automatska kompenzacija okomitosti rezanja Dostupnost: lipanj Lokacija: Hrvatska Paritet: EXW Belišće Nwjdpfxowmcmtj Aqqeh