M & S Energie- & Gebaeudetechnik

Stanje: rabljeno, Reže navoje v cevi od 1/8" do 3" pri 36 vrt./min Neprekinjeno in ustrezno mazanje čeljusti ter obdelovanca s pomočjo olja preko glave stroja. Primeren za uporabo z RIDGID 916, 918 in 975 valjčnimi utorniki. Isdpfoxn Itxex Ah Detn Nazivna zmogljivost cevi: 1/8" - 3" (2 1/2" - 4" z dodatno zobato glavo model 141) Zmogljivost za vijake: 10 mm - 52 mm do 30 RC Vrtljaji vretena: 36 vrt./min Motor: 1.700 W univerzalni

Stanje: pripravljen za uporabo (rabljen), REMS stiskalno orodje, akumulatorska stiskalnica ACC Li-Ion Plus, rabljeni stroj Proizvajalec: Rems Tip: ACC Li-Ion Plus Skupne dimenzije: Širina: 520 mm Globina: 290 mm Višina: 120 mm Iedpfx Aoxl E Nfeh Detn Ključne značilnosti: Elektro-hidravlični pogon Stiskalna sila: 32 kN Primerno za cevi in spojke Ø 10–108 mm (v nekaterih primerih do 110 mm) Univerzalni motor: 1850 W Baterija: Li-Ion 14,4 V / 3,0 Ah (tehnologija Li-Ion Plus) Multifunkcijska elektronika: mehak zagon, zaščita pred preobremenitvijo, avtomatski povrat (ACC) 360° vrtljiv nosilec za čeljusti Vgrajena LED delovna lučka Ergonomska, lahka zasnova: približno 4,3 kg Stanje: Rabljeno, dobro delujoče. Dodatki: baterija, polnilnik.

Stanje: rabljeno, Stiskalni stroj, REMS Power-Press XL ACC, rabljena oprema Proizvajalec: Rems Tip: Power-Press XL ACC Obseg stiskanja: Ø 10 – 108 mm (do 110 mm) Tlačna sila: 32 kN Motor: 450 W univerzalni motor Ijdpfoxlp T Iex Ah Djtn Napajanje: 230 V ali 110 V, 50–60 Hz Teža: približno 5,5 kg Dimenzije (V x Š x G): 800 x 335 x 230 mm Dolžina kabla: 2.900 mm Dodatki: več kot 400 vrst REMS stiskalnih čeljusti, adapterji za druge proizvajalce Dodatne funkcije: Samodejni povrat (Automatic Circuit Control – ACC) Vrtljiv nosilec stiskalnih čeljusti z avtomatskim zaklepanjem Združljiv z orodji čeljustmi drugih proizvajalcev Hitro stiskanje, npr. Geberit Mapress nerjaveče jeklo Ø 108 mm spoj v 15 sekundah Stiskalne čeljusti: 76,1; 88,9; 108 mm

Stanje: rabljeno, Ročna navojna naprava, navojni stroj, Ridgid navojni stroj, naprava za navoj na ceveh, stroj za rezanje navojev na ceveh, rabljena naprava Proizvajalec: Ridgid Tip: – Skupne dimenzije: 700 × 340 × 170 mm Dodatki: 1", 1 1/2", 2", 1 1/4", 1/2", 3/4", 2" Itedpexfk N Rofx Ah Djn

Stanje: dober (rabljeno), Glava za rezanje navojev, držalo za rezanje navojev, navojevno držalo, vpenjalni nastavek za navoje, rezkalno orodje, aparat za rezanje navojev -Proizvajalec: Pittler, samoodpirajoča glava za rezanje navojev -Tip: Model A 3 L 1018/20 Isdpfxjxc T Rlo Ah Dstn -Rezalne čeljusti: niso priložene -Vrtina: Ø 31/24 mm -Vpenjanje: Ø 40 mm -Dimenzije: 130/125/V170 mm -Teža: 3,6 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BDG300 PV2 SP LA, Thread Cutting / Machining Machine Oberburg – Precision Serial Production Robust, fully automatic machining machine for thread cutting, cutting to length, or feed operations. Swiss quality by Oberburg Engineering (Guggisberg & Keller AG). Equipment: • Complete control panel with reset, start, and feed functions • Sawing/milling module • Chip tray, clamping system • Change gears for precision machining (Morse 5+5) Ideal for: serial production, screw manufacturing, metalworking Iedpfx Ahow E Hfko Detn Condition: complete, well-maintained, tested

Stanje: dober (rabljeno), Thread cutting head, thread cutting chuck, tap chuck, tapping chuck, milling tool, thread cutting device Iodpfswzhgnjx Ah Detn -Manufacturer: PCM, tapping tool -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg

Stanje: pripravljen za uporabo (rabljen), Stroj za navoj Ridgid 1224, rezalnik navojev, rabljeni stroj Splošne dimenzije: Dolžina: 1140 mm Širina: 720 mm Višina: 1110 mm Zmogljivosti: Rezanje navojev na cevi: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) z dodatkom za navijanje z zobniškim prenosom 161. Rezanje navojev na vijakih: 1⁄4″ – 2″ (6 – 52 mm). Lastnosti: Navijanje navojev na cevi 1⁄4″ – 2″ pri 36 obr/min in na cevi 2½″ – 4″ pri 12 obr/min. Model 1224 je primeren za navoj različnih vrst cevi, vključno s črnimi, pocinkanimi, s plastično prevleko, kot tudi nerjavne cevi, IMC cevi ter cevi in palice z debelo steno do 30 Rockwell C trdote. Indukcijski motor zagotavlja, da raven hrupa ostaja v zakonsko dovoljenih mejah. Posebni motor s zagonom na kondenzator/kondenzatorskim delovanjem omogoča poln obseg navijanja tudi pri padcu napetosti. Uporablja univerzalno glavo za navoje 1⁄4″ – 2″ in nastavljivo glavo 2½″ – 4″ za rezanje stožčastih ali ravnih NPT/NPSM ali BSPT/BSPP navojev. Stalno in pravilno mazanje nožev in obdelovancev preko mazanja skozi glavo. Tehnične specifikacije: Motor: 1,1 kW, enofazni, 50 Hz, indukcijski tip. Iedpswwgvysfx Ah Dstn Stikala: robustno rotacijsko stikalo za vzvratno vožnjo / izklop / naprej in vgražena stopalka. Hitrost vretena: 36/12 obr/min. Menjalnik: dvostopenjski prenos z razmerjem 3:1. Vpenjalna glava: kladivna izvedba z zamenljivimi vložki. Zadnja centrirna naprava: izvedba z ekscentričnim odmičnikom. Rezalnik za cevi: model 764, popolnoma samonastavljiv in samozcentrirajoč, z rezilom F-229 za cevi od 1⁄4″ do 4″. Razširjevalec (rahljalnik): model 744, z rezili, 1⁄4″ – 4″. Mazanje: skozi glavo za navoje. Črpalka: samozasenčna, zobniška, samodejno reverzirajoča, s konstantnim pretokom.

Stanje: dober (rabljeno), Thread cutting machine, pipe threader - Manufacturer: Ridgid, thread cutting machine type 535 - Pipe size: 1/8 to 2 inches - Spindle bore: Ø 64 mm - Operating voltage: 230 Volt - Dimensions: 1080/700/H1140 mm Itsdpfxswub Eke Ah Dsn - Weight: 128 kg

Stanje: rabljeno, Leto izdelave: 1978, Thread diameter: 52 mm Thread length: 500 mm Thread pitch: as specified Hollow spindle diameter: 54 mm Spindle speeds: 25 – 140 rpm Itjdpfewt T Uhjx Ah Djn Speed settings: 6 steps Power supply: 380 V / 50 Hz Main drive motor: 3 kW Total power requirement: 4.5 kW Machine weight: approx. 0.75 t Space requirement: approx. 1.0 x 1.8 x 1.4 m Equipped with pneumatic workpiece clamping, Thread cutting head Z 52, Coolant system, 2 sets of die holders, size Z52/2B + 21B 5 sets of chaser jaws, for pitches from 1 – 2.5 mm The machine is in good condition.

Stanje: dober (rabljeno), Thread cutting machine, pipe threading machine, threading head, thread cutting chuck, threading chuck, thread cutting device - Manufacturer: Rems, threading head - Pipe size: 2 1/2 to 4 inches - Spindle bore: dimensions see photos Itodowq Nviepfx Ah Djn - Dimensions: 410/400/H340 mm - Weight: 50 kg

Stanje: dober (rabljeno), Thread cutting machine, pipe threader Itjdpjwq Nhxefx Ah Den - Manufacturer: Rems, thread cutting machine type Combi - Pipe size: 1/4 to 2 inch - Spindle bore: Ø 40 mm - Operating voltage: 220 Volt - Dimensions: 1400/1100/H1160 mm - Transport dimensions: 1200/510/H620 mm - Weight: 100 kg

Stanje: dober (rabljeno), quick-release device, quick-release clamp, quick-release vise, drilling jig, machine vice, drill press vice, clamping sleeve, collet Iodpfx Aev Uw Amoh Dotn - Thread cutting head: self-opening thread cutting head - Type: CH7-44 - Mount: M48 - Collet: Ø 25 mm - Dimensions: 330/210/H135 mm - Weight: 17.4 kg

Stanje: dober (rabljeno), Thread cutting head with die chasers, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck - Manufacturer: Efem, thread cutting head/thread chaser with four-jaw chuck, type G3 - Chasers: not included in delivery - Bore: Ø 27 mm - Mount: Ø 40 mm Iedpfev T Ufcex Ah Djtn - Dimensions: 160/130/H175 mm - Weight: 3.8 kg

Stanje: zelo dobro (rabljeno), REMS TORNADO 2010 THREADING MACHINE Product Description: - Reliable, highly efficient machine for threading, cutting, deburring, threading nipples, and flaring - For use in installations, locksmith workshops, and production plants - Robust, compact, and ergonomic design suitable for both construction sites and workshops - Operating principle: rotating material – stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large working area and chip tray - Adjustable material support - Exceptionally powerful and fast drive, e.g., 2” thread in just 15 seconds - Fully maintenance-free gearbox in a sealed oil bath - Two types of base available: - Portable version on 3 legs, with detachable large oil pan and chip tray - T-stand version with integrated larger oil pan and chip container, suitable for tabletop use. Fixed base or mobile carriage with material shelf for easy transport, optimal working height, stable – available as an optional accessory - Three high-performance motor options: - High-efficiency universal motor, 1700 W, overload protection, rotation speed 53 rpm Ijdpfx Ahjv T Trus Dotn - Capacitor motor, 2100 W, overload protection. Two speed settings: 52 and 26 rpm, also under full load. Very quiet operation - Three-phase motor, 2000 W, overload protection. Two speed settings: 52 and 26 rpm, also under full load. Very quiet operation - Convenient two-stage foot safety switch with emergency stop, enabling operation using full body weight - Two automatic clamping chucks with self-centering jaws. Material can be clamped and released quickly and easily - Self-tightening chucks ensure maximum holding strength - Strong, reliable pump with high delivery capacity - Optimum multi-directional supply of threading lubricant through the threading head ensures clean threads and long tool, gearbox, and motor life - Single automatic universal die head for all thread types, including extended threads; automatic opening with thread length control for tapered threads - Quick and easy thread size adjustment - Clear thread size scale - Easy and quick die changing thanks to positioned mounting - Reliable, indestructible, high-quality REMS threading dies with optimal geometry guarantee easy material entry, light threading, and clean threads. Made from high-strength, specially hardened steel for exceptionally long life - Self-centering pipe cutter. Stable forged steel yoke. Ergonomic wide handle for strong spindle pressure - Specially hardened cutting wheel made from tough, high-grade tool steel ensures long service life - Internal deburrer: stable, easy-to-use deburring device with adjustable deburring position - Specially hardened and ground blade guarantees easy deburring and exceptionally long life - Two blades for optimum burr removal, especially on small pipe diameters

Stanje: rabljeno, Leto izdelave: 1968, Thread diameter: 52 mm Thread length: 500 mm Thread pitch: as specified Hollow spindle diameter: 54 mm Spindle speeds: 25 - 140 rpm Speed settings: 6 steps Power supply: 380 V / 50 Hz Main drive motor: 3 kW Total power requirement: 4.5 kW Itedpfx Ahev N N Scs Dsn Machine weight: approx. 0.75 t Space requirement: approx. 1.0 x 1.8 x 1.4 m Equipped with motorized workpiece clamping, Thread cutting head Z 52, Coolant system, 2 sets of tool holders, size Z52/2B + 21B 5 sets of die jaws, for 1 to 2.5 mm pitch The machine is in good condition.

Stanje: rabljeno, Leto izdelave: 1998, Thread diameter 72 mm Thread length 200 mm Bolt threads from 6 - 72 mm Bolt threads from 1/16 - 2 3/4" Inch threads 1/4 - 2 3/4 - 1/16 - 2 1/2" Cutting head speed 35 + 70 rpm Pipe threads 16-63 mm Pipe threads 1/16 - 2 1/2" Total power requirement 2000/2300 watts Machine weight approx. 227 kg Space requirement approx. 1.2 x 0.6 x 1.2 m The thread cutting machine "REMS Unimat 75" is a high-performance unit for efficient cutting of bolt and pipe threads. Operating principle: stationary material – rotating head, manual, self-centering vice, pole-reversible motor, automatic lubricant cooling, drive via robust planetary gearbox, right and left rotation, thread cutting head for Strehler thread cutting dies. The Strehler dies are, according to the previous owner, regrindable. Electrically interlocked safety cover. Included is a 2 x 1 m base tray which is placed under the machine, with 2 grille inserts. Year of manufacture estimated. The machine was overhauled by Rems around 2015 and has barely been used since, as external threads have been produced on other machines. Since then, the machine has been in storage and is now being sold. Please note: current new price is €26,000. This is a used machine, therefore we sell under exclusion of any warranty. Iodpfov Irh Rex Ah Dotn STOCKED DEALER WITH OWN STORAGE AREA OF 1,600 m².

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, TEKNİK ÖZELLİKLER MODEL: HK-40 VALS KUVVETİ (KN): 10-400 Isdpfx Ahjv Iapis Dotn HIZ ARALIĞI (DEVİR/DAK): 17-53 MAKS. KALIP UZUNLUĞU (MM): 230 İŞ PARÇASI ÇAPI (MM): Ø4-Ø120 ANA MOTOR (KW): 18 TOPLAM GÜÇ (KW): 21,3 MİN/MAX TAKIM ÇAPI (MM): Ø160-Ø210 KALIP MİLİ ÇAPI (MM): Ø69,85 (Ø80 OPSİYONEL) MAKSİMUM ADIM (PİÇ) (MM): 7 SALLANMA AÇISI: ±12° AĞIRLIK (KG): 4800

Stanje: dober (rabljeno), Thread cutting head, tapping chuck, thread chuck, tap chuck, milling tool, thread cutting device Iodpovv Up Hjfx Ah Dotn -Manufacturer: PCM, tap wrench -Type: ET1-32 -Size: Ø 10 mm -Sale/Price: complete -Dimensions: Ø32 x 44 mm -Weight: 0.2 kg

Stanje: dober (rabljeno), Thread cutting head, tapping chuck, thread chuck, thread tapping chuck, milling tool, thread cutting unit - Manufacturer: PCM, thread tapping collets, 4 pieces Itedpfxevv Ufbe Ah Den - Model: ET1-40 - Size: 1x Ø9 mm / 2x Ø10 mm / 1x Ø12 mm - Sale/price: as a complete set - Shipping dimensions: 80/80/H52 mm - Weight: 1.2 kg

Stanje: dober (rabljeno), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting device - Thread cutting head: self-opening thread cutting head Iodpfx Asvv S I Toh Dotn - Type: Model A3 - Shank: Ø 40 mm - Dimensions: 118/12/H170 mm - Weight: 3.7 kg

Stanje: dober (rabljeno), Thread cutting head with Strehler jaws, pipe thread cutter, threading die stock, hand thread cutting die stock, threading die stock set, ratchet threading die stock Itjdpfx Ahovmhfpo Djn - Manufacturer: LUX, Hand Thread Cutting Die Stock Set 541 424 - Threading dies: R1/2", R3/4", R1", R1 1/4", 1 ratchet handle - Carrying case - Case dimensions: 360/340/H100 mm - Weight: 5.4 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Naprave za rezanje navojev z dodatno opremo, proizvajalec SONE, tip 2000, 230V. Itsdevk D Rpepfx Ah Djn

Stanje: zelo dobro (rabljeno), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Itjdpfevgng Hjx Ah Djn Threading machine, electric Design: robust, maintenance-free gearbox with special gear ratio for optimal force transmission, reversible (left/right), equipped with thermal overload protection and emergency stop switch. Self-reinforcing clamping effect thanks to the angular positioning of the clamping screw. Stable support bracket for torque assistance in both directions of rotation. Easy and quick replacement of cutting heads. Unique cutting head locking mechanism in the ratchet lever ensures secure seating during threading. Supplied complete with Central cutting heads and carrying case.

Stanje: rabljeno, Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting device - Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change tool holder Isdpfx Asu S Tcfjh Detn - Model: SH 3/4" - Shank: Ø 40 mm - Dimensions: 265/130/H160 mm - Weight: 7.1 kg