German Packaging Machines

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Na voljo je popolnoma avtomatski vertikalni stroj za izdelavo vrečk iz folije Hassia. Embalažni materiali: laminati/papirne folije/monofilmi, maks. širina vrečke: 600 mm, maks. dolžina vrečke: 1100 mm, maks. širina folije: 1240 mm, maks. premer role folije: 600 mm, cikel zmogljivosti (neprekinjeno delovanje): 40 ciklov/min, temperatura toplotnega tesnjenja: 92°C. Ogled na lokaciji je možen. Kjdpfsxa Elcsx Adksdi

Stanje: zelo dobro (rabljeno), Dobra rabljena vročevzdušna varilna naprava Saxon 2, nameščena na višinsko nastavljivem stebričku iz nerjavečega jekla z mobilnim vozičkom iz nerjavečega jekla – usmerjenost desno na levo. Kdodpfx Adjwtgt Dskji

Stanje: novo, Leto izdelave: 2025, Packaging system for dosing and filling granulates into pre-made bags, followed by vacuum sealing of the bag. Working steps: Bag removal, dosing of granulate via scale, shaping the bag into a brick form prior to filling, vacuuming and sealing, and discharging the bag. Suitable for granular materials such as coffee beans, grains, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizers, etc. PLC controlled, operation via touchscreen. Suitable for poly bags. Kedov Nm Afspfx Adkedi — Specifications: Filling range: 500–5000g; Accuracy: ±5g; Maximum machine cycle rate (idle): 9 cycles/minute; Power: 380V, total 5kW; Compressed air: 0.85m³/min, 6–8 bar; Machine dimensions: L2260×W2925×H2500mm. Please note that our new prices are often below typical used prices. Feel free to inquire and tell us about your packaging requirements. — We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. — All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging low-viscosity products into flat pouches, including a liquid dosing unit. Suitable for volumes from 10–50 ml, with continuously adjustable pouch length. - Specifications: max. machine cycle rate in idle: 200 cycles/minute; accuracy: depending on product; max. film width: 30–80 mm; pouch size: max. L50–110 x W30–80 mm; no compressed air required; power supply: 220V, 1.7 kW; stainless steel version (housing: SS201, product contact parts: SS304); machine dimensions: L790 x W600 x H1780 mm; weight: 400 kg; suitable for laminated composite films such as BOPP/PE films, etc. The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new equipment prices are often below typical used market prices. Feel free to inquire and tell us your packaging requirements. – We generally have 30–50 different new machines available for immediate delivery from stock. For custom-manufactured machines, we also offer very short lead times starting from approx. 3 weeks. – All machines are supplied with full warranty. Kdjdpev Nmy Defx Adkei

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging low-viscosity products into flat sachets. Includes liquid dosing unit. - Specifications: max. machine cycle rate (idle): 200 cycles/minute; suitable for volumes of 5-20ml; infinitely adjustable sachet length; accuracy: depending on product; max. film width: 30-80mm; sachet size: max. L50-110 x W30-80mm; no compressed air required; power supply: 220V, 1.7kW; stainless steel version (housing: SS201, contact parts: SS304); machine dimensions: L790 x W600 x H1780mm; weight: 350kg; suitable for laminated composite films such as BOPP/PE films, etc. Kdsdpov Nmywjfx Adksi The machine/system is also available in further versions for various packaging sizes and speeds. Please note that our new prices are often lower than the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. - We normally have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, 4-lane VFFS for packaging of granulates, powders, or liquids in pillow bags with back seal, optionally also for 3- and 4-side seal bags (at additional cost). Servo motors for rapid film feeding. Suitable for all sealable mono- and composite films as well as laminated films. Additional features: touchscreen operation monitor, automatic program setup, mark sensor, date/batch printer. – Specifications: maximum machine cycle rate in idle mode: 4x60 cycles/minute (equals up to 240 bags/minute); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; power supply: 380V, 6.3kW; compressed air: 1.4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Please note that our new machine prices are often lower than usual used machine prices. Feel free to inquire and let us know your packaging application. – We generally have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty. Kdodjv Nmx Tepfx Adkei

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with either high or low flowability. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operator monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport (double transport possible), air separator/extraction device (removes air from the bag before sealing—no vacuum is generated), holding device for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). Kedpov Nmkvefx Adkjdi Specifications of the VFFS packaging machine: Filling range: up to 3000ml; Film width: max. 520mm; Bag size min-max: L(80-400)xW(80-250)mm; max. idle machine cycle rate: 50 cycles/minute; Stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; Machine dimensions: LxWxH: approx. 1150x1790x1650mm; Weight: 600kg. Specifications of auger dosing unit: Filling capacity up to 50l (hopper); Filling range: 10-1000g; max. idle machine cycle rate: 50 cycles/min; Accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; Dosing unit dimensions LxWxH: 690x1030x1100mm; Weight: 150kg. Screw conveyor for automatic material transfer to the dosing unit. Vibration motor ensures uniform product flow. Feed hopper with up to 150 liters volume. Size depends on the customer-specific final system. Specifications: Hopper, conveyor length and angle can be customized to product or customer requirements; overall dimensions depend on this. Conveyor length: 3~4m; stainless steel 304; Conveyor speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; Weight: 130kg – 270kg. Deviation of the stated specifications is possible. Support bar optionally available. The discharge conveyor features a stainless steel frame. Specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions LxWxH: approx. 1850x550x1230mm; Weight: 80kg. Complete system dimensions: approx. 2350xW3590xH2500mm, depending on final configuration. The system must be adapted to customer-/product-specific requirements; therefore, deviations in the stated specifications of the modules and machines may occur. Main components: Colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. The machine/plant is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. – Typically, there are always 30-50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with volumetric dosing unit, single-cup feeder, and outfeed conveyor belt. Suitable for packing granular products such as sugar, rice, nuts, etc. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operator panel, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, option for double transport, air extraction/unit (removes air from the bag before sealing—does not create a vacuum), support device for heavy finished bags, euro-hole punching device, suitable for OPP and PE film (PE sealing unit may incur surcharge).—Specifications of the VFFS packaging machine: Filling range: up to 3,000 ml; film width: max. 520 mm; bag size min-max: L(80-400)xW(80-250) mm; max. idle cycle speed: 50 cycles/minute; stainless steel 304; 220 V, 4 kW; 6 bar, 0.3 m³/min; machine dimensions LxWxH: approx. 1150x1790x1650 mm; weight: 600 kg. The dosing cup has a filling capacity of up to 50 l. The single-cup feeder also has a capacity of up to 50 l. The hopper is manually filled in the lower position and automatically emptied in the upper position (complete cycle: 1 minute).—Specifications: height: 3-5 m; machine dimensions: L1400xW700xH3500 mm; 220 V/1 kW. Variations possible. The outfeed conveyor belt comes with a stainless steel frame.—Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1150xW5040xH3500 mm, depending on final configuration. The system must be tailored to customer/product-specific requirements, so technical specifications of components and machines may vary. Key components: Color touchscreen display SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further versions for different bag sizes and packaging speeds. Kdedpfjv Nmkcjx Adksi Please note that our new prices are often below the typical used equipment prices. Feel free to contact us and inform us about your packaging requirements. – Typically, 30–50 different new machines are always available from stock for immediate delivery. For customer-specific equipment, we offer very short lead times starting from approx. 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete version of the vertical packaging system with 10-head multihead weigher (1.3 l/head), Z-shaped bucket elevator, platform, discharge conveyor belt, and rotary accumulation table for finished, packaged products. Suitable for packing irregular bulk goods such as potato chips, cornflakes, biscuits, nuts, confectionery, shrimp, industrial components/products such as screws, nails, metal or plastic parts. The vertical form fill seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operation panel, available in various languages such as English, German, etc.), date printer, automatic program setup, print mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, dual transport possible, air separator/exhaust device (removes air from the bag before sealing - does not create a vacuum), bag support bracket for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost if required). - VFFS packaging machine specifications: Filling range: up to 3000ml; film width: max. 520mm; bag size min-max: L(80-400)xW(80-250)mm; max. machine cycles (no load): 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; machine dimensions LxWxH: approx. 1150x1790x1650mm; weight: 600kg. The weighing unit, with its 10 weighing heads (1.3l/head), offers high weighing accuracy. Also equipped with a PLC and operated via a touchscreen (also available in various languages), 99 programs can be preset or stored, the servo motor (memory hopper) can be adjusted for different types of products. - Specifications: Memory hopper capacity: 1.3l; weighing range: 10~1000g; accuracy: ±0.3~1.5g (depending on product); max. machine cycles (no load): 60 cycles/min; stainless steel 304; 220V, 1.5kW; weighing unit dimensions LxWxH: approx. 1436x1086x1258mm; weight: 400kg. - Z-bucket elevator specifications (for transporting material to the weighing unit): Dimensions customizable to customer requirements (standard height 3.6m); conveying capacity: 3-6m³/h; 380V, 0.75kW; gross weight: 500kg. The discharge conveyor features a stainless steel frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Rotary accumulation table for collecting finished bags from the discharge conveyor. Speed is adjustable. Table diameter: 1200mm (standard); stainless steel 304; 220V, 0.37kW. Stainless steel platform needed for access to weighing unit and upper part of the packaging machine, dimensions LxWxH: approx. 2x2x2m. Dimensions of the complete system: approx. L3200xW3200xH3600mm, depending on final configuration. The system must be customized to customer-/product-specific requirements. Specifications of modules and machines may therefore vary. Key components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in additional versions for various packing sizes and packing speeds. Kodpfx Aov Nmixodkedi

Stanje: novo, Leto izdelave: 2025, Packaging system for fully automatic dosing, filling, and packaging of tea into pyramid (tetrahedral) tea bags. Dosing or weighing is performed by an 8-head linear weigher, which is already included in the price. The pyramid tea bag packaging machine utilizes ultrasonic sealing technology to produce either flat standard tea bags or pyramid tea bags. Finally, the (flat or pyramid) tea bags are packed into the outer bag, which can be either a 3-side seal pouch or a pouch with a back seam. Kdjdpfx Aov Nmilodksi Specifications: Maximum machine cycle rate (idle): 50 cycles/minute; Number of linear weigher heads: 8; Weighing range: 1~10g; Accuracy: ±0.1g/bag; Tea bag dimensions: pyramid tea bag per side: 50–80 mm, flat tea bag: W(60–80)xL(40–80) mm; Suitable film types for tea bags: nylon, non-woven fabric, PET, PLA; Film width: 140 mm, 160 mm, 180 mm; Outer bag dimensions: W(80–120)xL(90–120) mm; Power: 220V, 1.5kW; Product-contacted parts made of stainless steel 304; Compressed air: 6 bar; Machine dimensions: depending on final layout. Please note that our new machine prices are often below standard used equipment prices. Feel free to send us your packaging requirements for a quote. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built solutions, we offer very short delivery times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee, and packaging into coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing units (auger doser for powder, volumetric doser for granules), and includes a Z-type conveyor, screw conveyor, discharge conveyor belt, and an AMTEC PRO P60XL as the VFFS packaging machine. Features also include a hot stamp printer for date and batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device), and flat-bottom module (the bottom seam is positioned tightly to the base, depending on film material). - VFFS Specifications: Reliable film transport by vacuum; PLC by MITSUBISHI/SIEMENS, WEINVIEW touchscreen; print mark sensor; quick-change forming unit; pneumatic sealing unit; servo motor for film transport; bag size: L(100-380)xW(110-300)mm; max. machine cycle rate (no load): 60 cycles/minute; stainless steel; 220V/4.0kW; 6 bar, 0.4m³/min; Dimensions and weight: L1600xW1260xH1680mm, 600/700kg. Kodpfx Adsv Nmh Uekedi - Volumetric Dosing Unit Specifications: 4 cups; stainless steel; dosing range: 80-2,000ml; max. machine cycle rate (no load): 60 cycles/minute. - Auger Doser Specifications: Stainless steel; servo motor; dosing range: 10-2,000g; fill hopper: 50 liters; accuracy: 0.5-2%; max. machine cycle rate (no load): 60 cycles/minute; hopper with side-opening, including dust collector. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us with your packaging requirements. We generally have 30-50 different new machines available from stock for immediate delivery. Additionally, we offer very short lead times from approximately 3 weeks for machines built to customer specifications. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling machine for packaging liquids OR pastes into flat pouches. Includes liquid dosing unit suitable for liquids/pastes with either high OR low viscosity. Kdedjv Nmzuspfx Adksi - Specifications: max. machine cycle rate (idle): 50 cycles/minute; suitable for volumes from 0–1000 ml; filling temperature up to 80°C; accuracy: +/- 1.0% (depending on product); max. film width: 430 mm; pouch size: max. 340 x 210 mm; compressed air: 1.5 m³, 6 bar; 220V, 4.8 kW; SCHNEIDER film transport motor, PANASONIC/Autonics print mark sensor, 7" touchscreen, OMRON PLC, FESTO pneumatic components (horizontal sealing), other parts by AIRTAC, OMRON 4-channel temperature control, electronic components by SCHNEIDER / OMRON, stainless steel version (SS304), hot stamping device included (2 rows, 10 characters). Dosing unit: pump with filling range of 100–1000 ml; 40-liter hopper tank with double wall and hot water circulation; machine dimensions: L1080 x W1300 x H1400 mm; weight: 550 kg. Please note that our new prices are often below typical used prices. Feel free to inquire and tell us about your packaging application. – We typically have 30–50 different new machines in stock and ready for immediate delivery. For custom-built machines, we offer very short delivery times from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical production and filling system for packaging liquids in Doypack pouches (stand-up pouches). Includes liquid dosing unit (suitable for high-viscosity liquids). Pneumatic drive system, computer-controlled, easy to operate and adjust. Suitable for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. – Specifications: Filling volume: 100-550ml; Pouch size: L(120-180)xW(100-150)mm; Max. idle machine cycle rate: 25 cycles/min; Accuracy: +/- 1.5%; Power: 220V, 1.7kW; Compressed air: 0.4m³, 6bar; Machine dimensions: L1450xW930xH2370mm, weight: 330kg. The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices are often lower than typical used prices. Feel free to enquire and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock at all times. For machines made to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with full warranty. Kjdpfov Nmz Iex Adkjdi

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of doypacks or flat pouches with or without zipper. Equipped with: touchscreen; PLC; photo sensor (print mark registration) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, expiry date. Specifications of the VFFS machine: - Maximum machine cycle rate (idle): 45 cycles/minute - Bag size: L(120-235)xW(60-200)mm - Suitable film width: 280-520mm - Product-contact surfaces made of: AISI 304 (optionally AISI 316 at extra charge) - Power supply: 220V, 50/60Hz Kdodev Nngfepfx Adkji - Power consumption: 3.9kW - Required compressed air: 0.4-0.8MPa - Compressed air consumption: 0.7m³/min - Dimensions (LxWxH): 2090*1820*1935mm - Weight: 800kg Please note that our new prices are often below common used equipment prices. Feel free to inquire and specify your packaging requirements. Typically, we have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times, starting from approx. 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for forming and sealing 3- or 4-side seal pouches. Equipped with: touchscreen; PLC; photo sensor (print mark detection) for seal/cut position; pneumatic sealing unit for final sealing; servo motor for film feeding; thermal transfer printer for batch number, date, and expiry date. - VFFS machine specifications: max. machine cycle rate (idle): 50 cycles/minute; bag size: L(40-330)xW(70-210)mm (double film feed possible for longer bags); suitable film width: 140-420mm; product-contact parts made of: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.5kW; required compressed air: 0.2-0.8MPa; air consumption: 0.6m³/min; dimensions (LxWxH): 1208x1030x1620mm; weight: 450kg. Kdedpfxev Nnf Us Adksi Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us with details of your packaging application. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for forming and sealing 3- or 4-side-seal sachets. Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for seal/cut positioning; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. idle cycle rate: 60 cycles/minute; bag size: L(40-210)xW(60-160)mm (double film feed possible for longer bags); suitable film width: 120-320mm; product-contact parts made of AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 2.4kW; required compressed air: 0.2-0.8MPa; air consumption: 0.6m³/min; dimensions (LxWxH): 1326*1066*1503mm; weight: 450kg. Please note that our new prices are often below standard used machine prices. Feel free to contact us and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock at all times. For customer-specific machines, we also offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty. Ksdpfx Adov Nnf Ioksdi

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). Twin version for increased output, featuring 2 complete production lines in one machine. Equipped with: touchscreen; PLC; photo sensor (print mark detection) for seal/cut positioning; servo-driven sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle rate in idle: 90*2=180 cycles/minute; bag size: L(40-300)xW(60-180)mm (double film draw-off possible for longer bags); suitable film width: 140-380mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 3.9kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.4m³/min; dimensions (LxWxH): 2270*1560*1880mm; weight: 900kg. Kjdjv Nnfzjpfx Adkjdi Please note that our new machine prices are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. - We typically have 30-50 different new machines immediately available from stock. For custom-made machines, we also offer very short delivery times starting from around 3 weeks. - All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, High-speed version with servo-driven continuous sealing unit for the end sealing station. Suitable for producing pillow bags with longitudinal (back) seam, gusseted stand-up pouches (requires gusseting tool), OR pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen display; PLC control; photo sensor (print mark detection) for seal/cut positioning; servo-driven end sealing unit; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: maximum operating speed (no load): 120 cycles/min; bag size: L(40-300)xW(60-200)mm (double film pull for longer bags possible); suitable film width: 140-420mm; product-contact parts: AISI 304 (optionally AISI 316 for a surcharge); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; weight: 580kg. Kdedpfxjv Nnfus Adksi Please note that our new machine prices are frequently below typical used machine prices. Don't hesitate to inquire and let us know your packaging requirements. - We generally have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short delivery times, starting from around 3 weeks. - All machines come with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for producing pillow bags with back seam and gusset stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for seal/cut positioning; servo-driven sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle rate (no load): 90 cycles/minute; bag size: L(40-310)xW(70-200)mm (double film feed L = 450mm), gusset stand-up pouch: L(40-310)xW(60-150)xD(30-80)mm (double film feed L = 450mm); suitable film width: 160-420mm; product-contacting parts made of: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.4kW; required compressed air: 0.7MPa; compressed air consumption: 0.20-0.35m³/min; weight: 450kg. Kdedpfev Nncmex Adkji Please note that our new prices are often below the usual prices for used equipment. Simply send us your enquiry and specify your packaging requirements. - Typically, 30-50 different new machines are immediately available from stock. For machines manufactured to customer specifications we offer very short lead times, starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset former required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end sealing unit; servo motor for film draw-off; ribbon coder for batch number, date, and expiry date (best before date). - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts made of AISI 304 (optionally, AISI 316 at additional cost); power supply: 220V, 50/60Hz; power consumption: 4kW; required compressed air: 0.7MPa; compressed air consumption: 0.1-0.3m³/min; weight: 320kg. Kedpfx Aov Nncajdkodi Please note that our new prices are often below typical used equipment prices. Feel free to send us an enquiry and tell us about your packaging requirement. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling system for dosing and filling powder into pre-made large bags/sacks, followed by sealing and/or sewing of the bag/sack. The system consists of product feed (screw conveyor), auger doser with weight feedback, conveyor belts for transferring to the heat sealing machine and sewing machine. Pre-made bags are manually placed by hand into the pneumatic clamp holder. The product is dosed and filled into the bag. Subsequently, the filled bag is manually guided via conveyor belt to the sealing or sewing module and either heat-sealed or sewn. – Auger Doser Specifications: Weight range: 10–50 kg (by changing the dosing screw); Accuracy: +/-0.5%; max. machine cycle rate in idle: 8 cycles/min; Feed hopper capacity: 100 L; Power supply: 380V, 50Hz, 3kW; Stainless steel version AISI 304; Machine dimensions: L1150xW1000xH2550mm; Weight: 450 kg. – Screw Conveyor Specifications: Throughput depending on product: up to 5 m³/h; Hopper capacity: 100 L; Tube diameter: 159 mm; Standard angle: 45° (optional customization 30–60°); Power: 3P, 380V; Machine dimensions: L1160xW890xH1000mm; Weight: 150 kg. – Heat Sealing Machine Specifications: Suitable for bags with H: 450–750 mm; Sealing angle adjustable by 20°; Machine dimensions: L720xW560xH1340mm; Weight: 100 kg. – Sewing Machine Specifications: Suitable for bags with H: 400–900 mm; Wrapping width: 30–50 mm, conveyor belt length: customizable. System dimensions and total weight depend on the final layout and can be customized. Please note that our new prices are often below standard used equipment prices. Feel free to contact us and let us know about your packaging requirements. We usually have 30–50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. All machines come with full warranty. Kjdpov Nm D Nsfx Adkjdi

Stanje: novo, Leto izdelave: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and for packing into stand-up coffee pouches with aroma valve. The system is equipped with two separate dosing units (auger filler for powder, volumetric dosing unit for granules) and also includes a Z-bucket elevator, screw conveyor, outfeed conveyor belt, and an AMTEC PRO P60L as the VFFS packaging machine. Further included are a hot stamping printer for date and batch number (optional: thermal transfer printer on request), anti-static module, stand-up pouch module (gusset device), and flat-bottom module (the bottom seam is formed tightly to the base, depending on the film material). VFFS Specifications: Reliable film pulling via vacuum; PLC from MITSUBISHI/SIEMENS, WEINVIEW touchscreen; mark sensor; quick-change forming unit; pneumatic sealing unit; film transport by servomotor; bag size: L(100-300)xW(80-240)mm; max. idle machine cycle rate: 60 cycles/minute; stainless steel; 220V/4.0kW; 6bar, 0.36m³/min; dimensions and weight: L1550xW1160xH1480mm, 600/700kg. Volumetric dosing unit specifications: 4 cups; stainless steel; dosing range: 80-2,000ml; max. idle machine cycle rate: 60 cycles/minute. Auger filler specifications: Stainless steel; servomotor; dosing range: 10-2000g; filling hopper: 50 liters; accuracy: 0.5-2%; max. idle machine cycle rate: 60 cycles/minute; hopper with side opening, including dust collector. Kedpfx Adsv Nmh Iskedi Please note that our new machine prices are often below the standard used prices. Feel free to ask for a quote and let us know your packaging requirements. We typically carry 30-50 different new machines in stock and ready for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Sample system with 10 automatic counting discs and a standard pouch packaging machine. Suitable for counting small parts such as screws, nuts, candies, nuts, etc., and for packaging programmable assortments into flat pouches or 3- or 4-side sealed bags. The number and size of the counting discs in the system can be customized (this sample system includes 10 counting discs!). - Specifications: Machine dimensions and total price depend on the required packing speed, the products to be packed, and the pouch size. Available in stainless steel and painted steel. - The price applies only to the sample system. Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and tell us about your packaging requirements. - We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting at approximately 3 weeks. - All machines are available with full warranty. Kdodpfx Ajv Nmhnsdksi

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine: Controlled via SIEMENS PLC, equipped with a volumetric cup dosing system. Suitable for packaging granular materials. Standard features include dosing, bag forming, packaging, sealing, printing, and counting. Consistent positioning enabled by servo-driven film transport; uniform film feed via two synchronously running belts; high degree of automation with automatic correction function. Robust construction, easy adjustment, and maintenance. - Specifications: maximum cycles at idle: 60 cycles/min; bag sizes: L 50–230 mm, W 50–150 mm; maximum film width: 320 mm; film thickness: 0.04–0.09 mm; bag types: flat bags, gusseted bags; dosing range: 150–500 ml; compressed air: 0.8 MPa, 0.25 m³/min; power supply: 2 kW/220V, 50Hz; dimensions (LxWxH): 1200×905×1300 mm; weight: 300 kg; housing: SS304; touchscreen: SIEMENS; PLC: SIEMENS; control valve: SIEMENS; servo motor: PANASONIC; cylinders and pneumatic components: SMC/FESTO; solenoid valve: SMC/FESTO; thermostats: OMRON. - Volumetric cup system: Suitable for the automatic dosing of small granular products and free-flowing powders such as granulated sugar, seeds, etc. - Specifications: max. idle speed: 60 cycles/min; fill weight: 100g–500g; the rotary table is equipped with a soft brush to gently handle products. - Auger system: fill range 1–50 ml; accuracy +/- 0.1g; max. idle speed: 50 cycles/min; power supply: 220V, 50Hz/110W. - Please note: This is only an example system. Please let us know your precise requirements. The machine/system is also available in other models for various packaging sizes and speeds. Please note that our new prices are often lower than usual used equipment prices. Feel free to contact us and let us know your packaging requirements. Typically, we have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty. Kdsdsv Nmhbopfx Adkoi

Stanje: novo, Leto izdelave: 2025, Automatic packaging machine for filling and packing tea into double chamber tea bags. Includes volumetric dosing unit and labeling system for attaching the thread with label. Labeling takes place on both sides (label-thread and thread-bag) using a staple. Double chamber bag is formed by cold sealing. Device for grouped bag discharge. PLC controlled, operation via touch monitor. Kedpfov Nlhgex Adkedi - Specifications: max. machine cycle speed (idle): 130 cycles per minute; dosing volume: max. 10cm³ (adjustable); hopper capacity: 13dm³; accuracy: ±5%; tea bag dimensions LxW: 40x60 / 45x60mm; film width for tea bag material: 94 / 103mm; suitable tea bag material: 12.5g/m², cold-sealable; label (LxW): 28x32mm; thread length: 148mm (±5mm); metal staple diameter: 0.5mm; power supply: 220/380V; power consumption: 10kW; necessary compressed air: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions LxWxH: 3500x1500x2400mm; weight: 4250kg. Please note that our new machine prices are often below the usual used machine prices. Just send us your enquiry and let us know your packaging application. – Typically, 30-50 different new machines are always available for immediate delivery from stock. For machines manufactured to customer specification, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.