PescoTech Inh. Sandro Pesce
PescoTech Inh. Sandro Pesce iz Köln
Ta trgovec še ni dodal opisa podjetja.
gospod Sandro Pesce
Merheimer Str. 444
Köln
Nemčija
Trenutne ponudbe podobnih prodajalcev
Mali oglas
Wehr
564 km
Namizni tabletni stiskalnik
MultiGelCRP1
MultiGelCRP1
Pokliči
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, Single-Punch Tablet Press Model CPR1
The CPR 1 benchtop press is a single-punch machine designed for tablet production. The powder is loaded into a hopper and conveyed through a stainless steel tube from the feed hopper into the die. The adjustable punch compresses the powder, and the finished tablet is subsequently ejected from the machine.
The machine operates in continuous motion using eccentric cams. It features a control panel equipped with a tablet counter. Up to 3,000 tablets can be produced per hour.
Nedpfxoykukqj Advocp
The tablet press can be fitted with round, oblong, or oval tooling sets. Tool changes, including punch replacement, can be carried out easily and quickly. All parts in contact with powder are made of AISI 316 stainless steel.
Technical Specifications
Machine dimensions CPR1: 350 x 500 x 720 mm
Net machine weight CPR1: 80 kg
Electrical connection: 1 Ph. 230 V, 50 Hz
Power consumption: 1.20 kW
Tablet ejection rate: max. 3,000 tabs/h
Tablet diameter range: 4–20 mm
Mali oglas
Bologna
340 km
Valjarni kompresor
AlexanderwerkWP 200
AlexanderwerkWP 200
Pokliči
Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ALEXANDERWERK VALJČNI KOMPAKTOR, MODEL WP 200
Stroj za kompaktiranje surovine deluje izključno s pomočjo tlačnih valjev pod hidravličnim pritiskom. Namenjen predvsem industrijski proizvodnji. Leto izdelave: 2011.
LASTNOSTI
- Premer valja: 200 mm
- Širina valja: 75 mm
- Krmilni sistem: zunanji krmilni omarici (dve celici)
- Opremljen s Combi-Vent-Feederjem (CVF), ki je sestavljen iz CVF mešala in CVF polžnega podajalnika, kar omogoča optimizirano odzračevanje surovine ter samodejno mešanje preseženih materialov (če obstajajo) s surovinami
PROIZVODNJA
- Zmogljivost: do 500 kg/h (laktoza)
- Največja reža med valji: 5 mm
- Največja hitrost valjev: 38 obr/min
- Največja stiskalna sila: 20 kN/cm
Nodpfx Adjycw Uvovscp
DIMENZIJE
- Višina: 2.010 mm
- Širina: 1.245 mm
- Globina: 1.700 mm
- Teža: 2.450 kg
- Teža brez krmilnega omarice: 2.050 kg
- Teža krmilnega omarice: 400 kg
- Višina krmilnega omarice: 2.100 mm
- Širina krmilnega omarice: 800 mm
- Globina krmilnega omarice: 600 mm
Mali oglas
Janville
1.017 km
Rotacijska stiskalnica za tablete
IMA KilianE150 plus
IMA KilianE150 plus
Pokliči
Stanje: rabljeno, Leto izdelave: 2003, Proizvajalec: IMA Kilian
Nsdpfjx R A Ulox Advscp
Model: E150 plus
Različica: 26-EU-B
Leto: 2003
Število postaj: 26
Vrsta orodja: B
Vrsta udarnih orodij: EU-B / IPT-B
Konfiguracija udarnih orodij:
- Premer orodja: 30,16 mm
- Višina orodja: 22,22 mm
- Maksimalni premer tablete: 16 mm
- Največja polnitev: 15 mm
- Največja glavna kompresija: 80 kN
- Največja prekompresija: 23 kN
- Hitrost proizvodnje: 7.800 – 160.000 tablet/h
Tehnična dokumentacija na voljo
Teža: 1.500 kg
Mali oglas
Janville
1.017 km
Valjarni kompresor
AlexanderwerkWP120x40V
AlexanderwerkWP120x40V
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, Proizvajalec: Alexanderwerk
Model: WP120x40V
Leto izdelave: 1999
Tip: Valjčni kompaktor
Uporaba: suha granulacija
Materiali: nerjavno jeklo
Premer valja – 120 mm
Širina valja – 40 mm
Kapaciteta: do 40 kg/h (laktoza)
Maksimalna stiskalna sila – 20 kN/cm
Maksimalna razdalja med valji – 4 mm
Največja hitrost valjev – 15 rpm
Oprema vključuje:
Nedpfox R A Eqox Advjcp
• PLC vmesnik Allan Bradley
• Dovajalni lijak
• Rotacijski dovajalni rotor
• Polžasti transporter: transport, prekompaktiranje in dovajanje materiala
• Valjčni kompaktorji
• Droblilnik kosmičev
• Predgranulator in fini granulator
Mali oglas
Janville
1.017 km
Stiskalnica za tablične računalnike
FettePerfecta 1000 / P1000
FettePerfecta 1000 / P1000
Pokliči
Stanje: rabljeno, Leto izdelave: 1985, Perfecta 1000 rotacijska stiskalnica za tablete z električno omaro
Proizvajalec: Fette
Model: Perfecta 1000 / P1000
Leto: 1985
Število stiskalnih postaj: 22
Maksimalna sila stiskanja: 80 kN
Maksimalna sila predstiskanja: 20 kN
Maksimalni premer tablete: 25 mm
Maksimalna debelina tablete: 10,5 mm
Maksimalna ura proizvodnje: 72.600 tablet
Maksimalna višina polnjenja: 22 mm
Premer delilnega kroga: 315 mm
Hitrost matrice: 15–55 obr/min
Oblika bata: EU 1
Premer matrice: 38,1 mm
Višina matrice: 23,8 mm
Premer telesa bata: 25,4 mm
Dolžina zgornjega bata: 133,6 mm
Nodpfxox R Awmo Advecp
Dolžina spodnjega bata: 133,6 mm
Globina vstavitve bata v matrico: 2–6 mm
Dimenzije stroja (tloris): 1030 x 1090 mm
Neto teža: 1.800 kg
Dokumentacija na voljo
Mali oglas
Janville
1.017 km
Valjarni kompresor
GerteisGMP-Polygran Macro Pactor 250/100/3
GerteisGMP-Polygran Macro Pactor 250/100/3
Pokliči
Stanje: rabljeno, Leto izdelave: 2004, Proizvajalec: Gerteis
Model: GMP-Polygran Macro Pactor 250/100/3
Letnik: 2004
Tip: valjčni kompaktor, granulacijska enota za farmacevtsko industrijo.
Vključuje:
- Dovajalni polž
- Stiskalni polž
- Kompaktirna cona s tlačnimi valji
- Granulacijsko območje z zvezdastim rotorjem in sejalno rešetko
Sila: 1 – 20 KN/cm
Širina reže: 1,0 – 6,0 mm
Hitrost tlačnih valjev: 1 – 30 vrt/min
Premer valja: 250 mm
Širina valja: 100 mm
Kapaciteta: 60 – 400 kg/h (normalna vrednost: 200 kg/h)
Oprema demontirana in skladiščena.
Na voljo popolna električna ter tehnična dokumentacija, vključno z varnostno kopijo programa.
Nodpfx Adex R Ar Rovecp
Električna in varnostna krmilna omara nista priloženi; te je možno ponuditi posebej.
Mali oglas
Janville
1.017 km
Rotacijska stiskalnica za tablete
GEACourtoy R090
GEACourtoy R090
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, GEA Courtoy R 090/18 rotacijska tabletna stiskalnica z električno omarico R090XT13
Število položajev / postaj: 18
Tip izseka: EU D
Največja stiskalna sila: 100 kN
Največja predstiskalna sila: 10 kN
Proizvodna hitrost: 15.900 – 79.200 tablet / uro.
Maks. premer tablete: 25 mm
Zunanji premer matrice: 56 mm
Višina matrice: 23,81 mm
Premer telesa izseka: 25,35 mm
Nodpfxox R Amho Advjcp
Višina stiskalnice: 1955 mm
Neto teža: 1800 kg
Popolna tehnična dokumentacija.
Dovajalna naprava / Dozirni lijak / Iztočna žleba / Krmilni sistem Allen Bradley.
Majhne dimenzije. Oprema v odličnem stanju z malo delovnimi urami.
Mali oglas
Yerville
1.121 km
Kompresor
FETTEP1200
FETTEP1200
Pokliči
Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 09-305, skupna masa: 4.800 kg, skupna dolžina: 1.120 mm, skupna širina: 1.300 mm, skupna višina: 1.890 mm, FETTE tablet press for refurbishment.
Sold with:
- 1 turret change trolley
- 1 control panel ("controls" section to be refurbished)
Also sold with 2 turrets:
- 1 turret with 20 stations (EU1 -441 G 10)
Tablet output: min. 30,000 - max. 120,000
Maximum tablet diameter: 25 mm
Rotational speed: 25 - 100 rpm
Die diameter: 38.1 mm
Die height: 23.8 mm
- 1 turret with 30 stations (EU 19 H 11)
Ncjdpfx Aswpu Sysdvep
Tablet output: min. 45,000 - max. 216,000
Maximum tablet diameter: 13 mm
Rotational speed: 25 - 120 rpm
Die diameter: 24 mm
Die height: 22.22 mm
Electrical supply: 400 V
Precompression (kN): 50
Main compression (kN): 80
Maximum tablet dimensions (mm): 13 / 25 mm
Mali oglas
Yerville
1.121 km
Tabletna stiskalnica
CourtoyR290F / R292F
CourtoyR290F / R292F
Pokliči
Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: CBR29010, vhodna napetost: 380 V, skupna širina: 1.310 mm, skupna dolžina: 1.400 mm, skupna višina: 2.280 mm, višina krmilne omare: 2.200 mm, dolžina elektro omare: 600 mm, širina krmilne omare: 600 mm, skupna masa: 4.500 kg, Oprema: dokumentacija / priročnik, COURTOY R292F Tablet Press
Missing both tablet discharge chutes and the cables between the electrical cabinet and the machine.
All documentation, including electrical schematics, is available (in French).
Year: 1999
Serial No.: CBR29010
Punch type: D
Weight (kg): 4,500
Ncsdjwpuzhepfx Advsp
Output/hr: 43,000 – 350,000
Compression force (kN): 100
Pre-compression force (kN): 10
Maximum tablet size (mm): 25.40
Die outside diameter (mm): 38.10
Die height (mm): 23.81
Punch diameter (mm): 25.40
Mali oglas
Hradec Králové
456 km
Rotacijska stiskalnica za tablete
KilianE150 Plus
KilianE150 Plus
Pokliči
Leto izdelave: 2004, stanje: rabljeno, Rabljena enostranska rotacijska tabletirka Kilian E 150 PLUS. Opremljena z nerjavečimi ohišji. Ima 26 postaj, primerna za orodja do 16 mm, z orodji tipa EU-B. Ročno nastavljiva globina polnjenja do 20 mm. Predstisk z močjo 23 kN ter ročno nastavljiv glavni pritisk do 100 kN (10 ton). Največja kapaciteta do 162.800 tablet na uro. Nerjaveči silom podprt menjalnik hitrosti polnilnika. Stiskalnica je poganjana z električnim motorjem 4 kW/3 faze/400V/50Hz s frekvenčnim pretvornikom. Letnik 2004.
Ncodpfswm Ar Asx Advop
Mali oglas
Hamburg
898 km
Stiskanje tabličnih računalnikov
AMTECTAB R77 D
AMTECTAB R77 D
Pokliči
Leto izdelave: 2025, stanje: novo, Rotary tablet press for the tableting of single-layer tablets. Easy tool change, fast cleaning, low-noise operation. Includes dust extractor, tablet deduster, and vacuum conveyor.
Ncjdpfxov Nl Sfo Advop
- Specifications:
- Tooling: D type
- Number of punch stations: 15 units
- Max. machine speed (idle): 77 cycles/minute (approx. 69,000 tablets/hour)
- Max. tablet diameter: 25 mm
- Max. fill depth: 20 mm
- Max. precompression force: 12 kN
- Max. main compression force: 100 kN
- Product-contact parts are made from stainless steel SUS 316L; housing is stainless steel 304
- Power consumption: 5.5 kW
- Machine dimensions: 660 × 690 × 1620 mm
- Weight: 675 kg
Please note that our new prices are often below the usual prices for used machines. Feel free to contact us and let us know your packaging requirements. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty.
Mali oglas
Wehr
564 km
Stiskanje tabličnih računalnikov
SPT Süd KoreaTP600
SPT Süd KoreaTP600
Pokliči
Stanje: novo, Leto izdelave: 2026, skupna širina: 1.500 mm, skupna dolžina: 2.500 mm, skupna višina: 3.200 mm, Rotary Tablet Press SPT-TP600
Ncsdpsuac Sfofx Advsp
2-layer production;
Touchscreen, PLC Control Panel;
HMI (Human Machine Interface);
SPT-TP 600
Number of stations (max.): 16 stations
1 Max. tablet output: 3,000 - 18,000 tablets/hour
2 Max. tablet diameter (round): 50 mm
3 Max. tablet thickness: 15 mm
4 Max. main compression force: 30 t
6 Dimensions: 1,500 x 2,500 x 3,200 mm
Mali oglas
Gelsenkirchen
835 km
Stiskanje tabličnih računalnikov
HidrobrasilEinständerpresse
HidrobrasilEinständerpresse
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.400 mm, skupna širina: 1.500 mm, skupna dolžina: 2.400 mm, stiskalna sila: 20 t, skupna masa: 2.000 kg, vrsta vhodnega toka: trifazni, širina krmilne omare: 80 mm, vhodna napetost: 400 V, dolžina elektro omare: 60 mm, moč: 22 kW (29,91 KM), vhodni tok: 32 A, temperatura okolja (min.): 10 °C, okoljska temperatura (maks.): 40 °C, vrsta nastavitve višine: hidravlični, Oprema: dokumentacija / priročnik, If the press does not exactly meet your requirements, please request a customized quotation tailored to your needs with just one click:
Contact us for a personalized offer.
HIDROBRASIL manufactures presses strictly according to your specifications at surprisingly favorable prices!
#####
C-Frame Press 20 Ton Manual Loading Press
20 T Tablet Press, Single Column Press, C-Frame Press, Manual Desk Press
Machine type: Hydraulic Single Column Press
Year of manufacture: 2023
Location: Gelsenkirchen, Germany
Technical Data:
- Press force: max. 20 tonnes (at 250 bar)
- Free tearing force: max. 20 kN
- Pressurization time: max. 2 seconds (closed tool, steel-on-steel)
- Maximum daylight opening: 500 mm
- Stroke and minimum opening: 400/100 mm
- Table height above floor: 800 mm
- Overall height: approx. 2,400 mm
- Minimum hall height: 3,500 mm
- Parallelism tolerance: +/- 0.1 mm at 20°C
- Deflection: 0.3 mm/m (at max. closing force with 70% table utilisation)
- Total weight: approx. 2 tonnes
- Operating speeds: Rapid close 120 mm/s, pressing speed 10 – 5 mm/s
- Sound pressure level: max. 78 dB(A) measured at 15 m height at control panel as per DIN 45635-T16-KL3
Hydraulic System:
- Number of press cylinders: 1 pc.
- Operating pressure: max. 250 bar
- Pressure accuracy during pressing stroke: +/- 5 bar
Ncjdpfx Ajtv Ewdedvep
- Main pump: Gear pump approx. 10 L/min
- Oil volume: approx. 150 litres (HLP 46 MW)
- Ambient temperature: max. 40°C
- Oil temperature: max. 55°C
Electrical:
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Main motor: 22 kW
- Total connected load: approx. 6 kW
Control Cabinet:
- Protection class: IP 54
- Spare capacity: approx. 20%
- Cooling: no
- Interior lighting: no
- Operating mode switch: lockable
Features:
- Light curtain: SICK / PILZ / SCHMERSAL
- Positioning: via adjustable sensors
- Pressure adjustment: 5 T to 20 T, adjustable via rotary control
- Two-hand operation: standard, optional foot switch available
- Table top: tray-shaped with 50 mm raised edge and side drain
- Control cabinet: mounted on right side of the press, protection class IP 54
Function and Operation:
- Activation: via main switch
- Pressure setting: via rotary control
- Cycle initiation: by two-hand control or optional foot pedal
- Safety features: according to EU regulations and accident prevention (UVV) standards
Special Features:
- Press tooling: Upper tool with 8 press rams, 3-piece lower tool
- Press cycle: capacity to produce 8-12 pressed parts per minute
- Hydraulic unit: completely removable for maintenance
Service and Warranty:
- Monitoring and inspection: in compliance with DIN ISO 16092-3-2018
- Service: from Waibstadt or Gelsenkirchen
- Documentation: according to CE standards
---
Looking for a machine tailored to your needs?
Contact us for a customized offer.
Mali oglas
Denekamp
902 km
Stiskanje tabličnih računalnikov
Elizabeth HataECO III SL
Elizabeth HataECO III SL
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, Slugger-modell med 12 stationer med specialverktyg
Maximal presskraft: 120 kN
16/20 stationer tillgängliga med D-verktyg och 100 kN presskraft
Fyrkantig modell med GMP-konstruktion.
Valfri elektromagnetisk koppling för icke-farmaceutiska / tungdriftsapplikationer. ACVFD som tillval för huvudmotorn.
Högmomentmotor för sluggingapplikationer.
Idealisk för slugging-/brus-/veterinär-/icke-farmaceutiska applikationer.
Ncedpjrrgtrsfx Advop
Lastcell för övervakning av presskraft finns som tillval.
38 mm runda tabletter komprimeras utan problem.
Mali oglas
Gelsenkirchen
835 km
Vulkanizacijska stiskalnica
HidrobrasilLaborpresse
HidrobrasilLaborpresse
Pokliči
Leto izdelave: 2021, stanje: novo, stiskalna sila: 50 t, Here are the technical specifications of the machine on offer:
If this press does not precisely meet your requirements, please request a customized quote tailored exactly to your needs with a single click:
Contact us for a custom quote.
HIDROBRASIL manufactures presses to your specifications at surprisingly affordable prices!
Technical data & information:
Hydraulic 50 T heated press for laboratories
- This is an under-ram press with a daylight opening of 400 mm
- Ram stroke: 300 mm
- Heated platen temperature up to 250°C
- Heated platen size: 200 x 200 mm
- Weight: approx. 1,500 kg
- Height: 1,950 mm
- Integrated hydraulics in the press frame
- Hydraulic tank: 100 L
- Monitored vertical safety door for the pressing area
- Pressure, position, and speed adjustable via SIEMENS S7-1200
- SIEMENS 9-inch touchscreen monitor
- Safety technology provided by SICK
(C-frame press, hydraulic press, laboratory press)
Looking for a custom-fit machine?
Contact us for a customized quote.
Ncedpfxsgrkigo Advjp
Our hydraulic presses are manufactured in accordance with German and European machinery directives (2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these requirements. Our main strengths are special-purpose machine construction and press automation. We offer tailored hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices.
For the hydraulics of our presses, we primarily use components from leading European manufacturers.
Mali oglas
Ennepetal
802 km
Tisk s štirimi stolpci
HidralmacLaborpresse
HidralmacLaborpresse
Pokliči
Stanje: rabljeno, stiskalna sila: 30 t, številka stroja/vozila: DF0139, Pressure: 30 t
Passage width: 1000x1000 mm
Stroke: 800 mm
Total power requirement: 3 kW
Machine weight approx.: 5 t
Nedpfx Adofxykhjvocp
Space requirements approx.: 3360x1300x1360 mm
Return force: 3 t
Column diameter: 75 mm
Downward travel speed: up to 200 mm/sec
Maximum pressing speed: 0-10 mm/sec
Return speed: 200 mm/sec
Table height above floor approx.: 900 mm
Max. distance table - ram: 1000 mm
Cylinder diameter: 126 mm
Piston diameter: 71 mm
Mali oglas
Ennepetal
802 km
Stiskalnica za ogrevanje
HidrobrasilVulkanisierpresse
HidrobrasilVulkanisierpresse
Pokliči
Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0277-Rev06, stiskalna sila: 10 t, Pressure: 10 t
Column gap: 200 mm
Stroke: 200 mm
Approx. machine weight: 1.5 t
Space requirement approx.: 2000 x 1420 x 760 mm
Heating plates (L x W): 660 x 210 mm
Clear opening height between the heating plates: 200 mm
Travel (between the heating plates): 200 mm
Oil tank: 70 l
Table height: 1100 mm
Table plate resting on cross beams: 125 mm
Ram height: 250 mm
On the left and right sides inside the housing, there is a counterweight connected to the window frame via a wire rope running over a pulley. This allows the window to be opened effortlessly and to be held securely at any desired height.
Both plates, together with the thermal insulation panels, heating plates, and the actual ram/table, are ground flat.
Polished, chrome-plated guide columns on the left and right, over which the ram is held parallel by 250 mm high bronze guides.
Constant pressure holding for up to five hours, with a tolerance of max. 5%.
electronic door monitoring
The vertical door is monitored by the safety control. The closing mechanism only allows ram movement when the door is closed.
Ncsdpsffamyjfx Advop
Additionally, the closing mechanism prevents the door from opening when the heating plates are hotter than 50 degrees Celsius. However, this function can be intentionally overridden by the operator, who must press and hold a switch for 10 seconds, clearly labeled: "Door release – risk of burns!".
Mali oglas
Ennepetal
802 km
Stiskalnica za sol
HidralmacMineralsteinpresse
HidralmacMineralsteinpresse
Pokliči
Leto izdelave: 2020, stanje: delavnici obnovljeno (rabljeno), stiskalna sila: 400 t, številka stroja/vozila: DF0317, Tlak: 400 t
Prehodna širina: 600 mm
Hod: 400 mm
Teža stroja cca (brez obratovalnih tekočin): 14 t
Dimenzije D x Š x V: 2380 x 1680 x 3580 mm
Moč motorja: 36 kW
Maks. delovna višina: 750 mm
Maks. hitrost pomika naprej: 10 mm/s
Hitrost v fazi stiskanja: 10 mm/s
Premer stebra: 230 mm
Povratna sila: 40 t
Hitrost hitrega pomika: 25 mm/s
Delovni hod: 500 mm
Oljni rezervoar: 600 l
Hlajenje olja: 1,5 kW
Dolžina transportnega traku: 6 m
Monitor: WEG 12 palcev
Njdpfxsd E Irhj Advjcp
Kakovost jekla: strojnogradbeno jeklo LCG ASTM A36, izdelano po DIN 8651
Vsi deli, ki so v stiku s soljo, so iz nerjavnega jekla.
Mali oglas
Wehr
564 km
Vrtenje tableta tiska
SPT Süd KoreaTP500D
SPT Süd KoreaTP500D
Pokliči
Leto izdelave: 2026, stanje: novo, Rotary tablet press SPT-TP500D with double-sided pressing;
2-layer (bilayer) production;
Touchscreen, PLC control panel;
HMI (Human Machine Interface);
SPT-TP 500D
Number of stations (max.): D=41 / B=49 / BB=59
1. Max. tablet output (double-sided): T/h – 270,000 / 360,000 / 420,000
Ncsdjdy Dz Ajpfx Advsp
Max. output 2-layer: T/h – 90,000 / 115,000 / 140,000
2. Max. tablet diameter Round (mm): 13 / 16 / 25
Shaped: 14 / 19 / 25
3. Max. tablet thickness (mm): 8.5
4. Max. main compression force (t): 10
6. Dimensions (mm): 1150 x 1550 x 1950
Mali oglas
Wehr
564 km
Pritisnite vrtljivi tableta
SPTTP-400
SPTTP-400
Pokliči
Leto izdelave: 2026, stanje: novo, Rotary Tablet Press SPT-TP 400 with high production capacity;
Touch screen, PLC Control Panel;
HMI (Human Machine Interface);
SPT-TP 400
Ncjdsdy Dzrspfx Advop
Number of Stations (max.):
D = 30, B = 36, BB = 45
1. Max. tablet output/hour: T/h: 125,000 (D), 170,000 (B), 215,000 (BB)
2. Max. tablet diameter (round), mm: 13 (D), 16 (B), 25 (BB)
Max. tablet diameter (shaped), mm: 14 (D), 19 (B), 25 (BB)
3. Max. tablet thickness, mm: 8.5
4. Max. main compression force, t: 10
5. Max. pre-compression force, t: 2
6. Dimensions, mm: 1000 x 1230 x 2000
Mali oglas
Wehr
564 km
Pritisnite vrtljivi tablett
SPTTPL -200
SPTTPL -200
Pokliči
Leto izdelave: 2026, stanje: novo, Small rotary tablet press SPT-TPL 200 (suitable for small scale production);
Touchscreen and PLC control platform;
HMI system;
The machines conform to GMP regulations and are CE certified;
Number of stations (Max.): D=13 | B=16 | BB=19
Ncjdpfx Adjdy Dzievep
1. Max. tablet output per hour (T/h): 46,000 | 57,000 | 68,000
2. Max. tablet diameter
- Round (mm): 25 | 16 | 13
- Shaped (mm): 25 | 19 | 14
3. Max. tablet thickness (mm): 8.5
4. Max. main compression force (t): 5
5. Max. pre-compression force (t): 1
6. Dimensions (mm): 600 x 1106 x 1705
Mali oglas
Brazilija
9.470 km
Stiskalnica za sol
HidrobrasilMineralsteinpresse
HidrobrasilMineralsteinpresse
Pokliči
Stanje: novo, Leto izdelave: 2020, stiskalna sila: 300 t, številka stroja/vozila: DF0240 - Rev.00, Pressure: 300 t
Clear width: 600 mm
Stroke: 500 mm
Ncsdpfsdxvfkox Advsp
Machine weight approx. (without operating fluids): 8.5 t
Dimensions L x W x H: approx. 2275 x 1650 x 4050 mm
Retracting force: 30 t
Motor power: 30 kW
Max. working height: 800 mm
Advance speed max.: 10 mm/sec
Pressing speed: 10 mm/sec
Travel distance: 500 mm
Ram plate: 600 x 600 mm
Table plate: 600 x 600 mm
Table height above floor: 850 mm
Oil tank: 350 l
Oil cooling (electric): 1.5 kW (max)
Ejector stroke: 250 mm
Ejector force: 50 t
Perimeter maintenance platform: 2,800
Oil drip tray: 2,800 L
Upper and lower tool (for 8 kg salt block): 11,000
Automatic filling with 500 kg reservoir: 58,000
Speed increase to 80 mm/sec: 19,000
Each additional meter of conveyor belt: 850
Light barriers front and rear: 6,800
Side panels: 4,200
7 m roller conveyor – for salt block transport and interim storage: 12,900
Mali oglas
Ennepetal
802 km
Stiskalnica za sol
HidralmacMineralsteinpresse
HidralmacMineralsteinpresse
Pokliči
Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), stiskalna sila: 150 t, Pressure: 150 t
Stroke: 500 mm
Machine weight approx. (without operating fluids): approx. 8.5 t
Dimensions L x W x H: 1200 x 1800 x 3100 mm
Motor power: 10 kW
Max. working height: 1000 mm
Max. advance speed: 9.9 mm/sec
Pressing speed: 100 t = 9.9 to 0 mm/sec
Table height above floor: 1000 mm
Guide lubrication: grease nipples
Column diameter: 230 mm, chrome-plated
Return speed: 25 mm/sec
Hydraulic tank: 500 l
Oil requirement: approx. 400 l
Peripheral maintenance balcony: 5800 ?
Left and right closed side panels: 3900 ?
Rear closed: 2800 ?
Front light barriers for higher speed, only with maintenance balcony and rear closed: 4800 ?
Ncedpfxedxvfis Advjp
Tripling of speed, only with maintenance balcony, closed sides and rear: 29000 ?
Siemens S7 1200, monitor control with 12" display and Pilz safety technology: 8200 ?
Steel quality: Engineering steel LCG ASTM A36, manufactured according to DIN 8651
All components that come into contact with salt are made of stainless steel














































































































































































