Thomas Dietrich Kanaltechnik

Stanje: novo, Leto izdelave: 2025, nosilnost: 4.000 kg, dvižna višina: 17.550 mm, skupna dolžina: 7.350 mm, Max. lifting capacity: 4,000 kg Max. lifting height: 17.55 m Max. outreach: 13.08 m Breakout force with bucket: 7,766 daN Upward tilt angle: 16° Downward tilt angle: 110° Turning radius (over tyres): 3.94 m Lifting time: 16 s Lowering time: 12 s Telescopic boom extension: 16 s Telescopic boom retraction: 13 s Tilting in: 4 s Tilting out: 4 s Engine emission standard: Stage V Number of cylinders / Cylinder capacity: 4 – 3,621 cm³ Rated power IC engine – Power: 100 Hp / 75 kW Ncsdpfx Asydfrxsbbjl Max. torque / Engine speed: 410 Nm @ 1,600 rpm Tractive force: 7,850 daN Transmission type: Torque converter Number of gears (forward / reverse): 4 / 4 Travel speed (laden): 25 km/h Max. travel speed: 24.90 km/h Max. travel speed (may vary according to applicable regulations): 24.90 km/h Parking brake: Automatic parking brake Service brake: Oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: Gear pump Hydraulic flow / Hydraulic pressure: 167 l/min – 270 bar Engine oil capacity: 10 l Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Sound level in cab (LpA): 79 dB External noise (LwA): 106 dB Hand/arm vibration exposure: < 2.50 m/s² Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Cab certification: ROPS / FOPS Level 2 cab Controls: JSM

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 20.590 mm, - Maximum working height: 43.15 m - Maximum platform height: 41.15 m - Maximum horizontal outreach: 27.43 m - Below ground reach: 6.00 m - Load capacity – unrestricted: 300 kg - Load capacity – restricted: 454 kg - Maximum number of persons on platform (restricted/unrestricted outreach): 3/2 - Platform rotation range: 160° - Basket arm length: 5.48/9.14 m - Vertical basket arm articulation: 130° - Upper carriage rotation: 360° - Side overhang (axles retracted): 1.14 m - Side overhang (axles extended): 1.70 m - Drive speed – stowed: 4.3 km/h - Drive speed – elevated: 0.65 km/h - Gradeability – stowed (2): 35% - Tilt sensor activation (longitudinal/transverse): 4.5° / 4.5° - Turning radius – inside/outside (axles retracted): 8.03 m / 9.96 m - Turning radius – inside/outside (axles extended): 2.90 m / 6.17 m - Tyres: 445D50/710 - Drive type: Diesel - Hydraulic tank capacity: 227 L - Fuel tank capacity: 151 L Ncjdpjydfrrofx Abbel - Noise/sound pressure level (ground): 91 dBA - Noise/sound pressure level (platform): 75 dBA - Vibrations: < 2.5 m/s² - Tyre contact pressure: 896 kPa

Stanje: rabljeno, skupna dolžina: 4.490 mm, Leto izdelave: 2013, nosilnost: 5.500 kg, Crane Ormig 5.5tmE Drive Electric Year of manufacture 2013 Lifting capacity (kg) 5,500 Ncodpfeydfrlex Abbsl

Stanje: rabljeno, Leto izdelave: 2007, Anzahl der gesteuerten Spindel(C-Achsen): 2 Anzahl der gesteuerten Achsen: 8 Anzahl der Kanäle: 3 Max. Stangendurchmesser: 65 mm Bohrung in Zugstange: 75 mm Spannfutterdurchmesser: 175 mm Spindelnase: 140 mm Max. Drehzahl: 5.000 min-1 Nenndrehmoment: 191 Nm Nennleistung: 20 kW DATEN DER W2-ACHSE DER GEGENSPINDEL Hub: 690 mm Eilgang: 30 m/min Max. Beschleunigung: 5 m/s² Nennkraft: 2.400 N DATEN DER X1-ACHSE Hub: 165 mm Ncsdpfsydfq Iox Abbjl Eilgang: 40 m/min Max. Beschleunigung: 10 m/s² Nennkraft: 2.400 N DATEN DER Z1-ACHSE Hub: 678 mm Eilgang: 30 mm Max. Beschleunigung: 5 m/s² Nennkraft: 5.000 N DATEN DER Y1-ACHSE Hub: 80(+50/-30) mm Eilgang: 30 m/min Max. Beschleunigung: 5 m/s² Nennkraft: 5.000 N DATEN DER X2-ACHSE Hub: 165 mm Eilgang: 30 m/min Max. Beschleunigung:5 m/s² Nennkraft: 5.000 N Anzahl Werkzeugstationen: 12 Durchmesser Werkzeugaufnahme: 30 mm Angetriebene Stationen: 12 mm Max. Drehzahl der angetriebenen Werkzeuge: 4.000 min-1

Stanje: rabljeno, Leto izdelave: 2008, Premer struženja: 280 mm Ncjdpsydfqzofx Abbel Dolžina struženja: 600 mm Premer obdelovanca v vrtenju: 280 mm Dolžina obdelave: 600 mm

Stanje: rabljeno, Leto izdelave: 2003, Premer vpenjalne glave: 250 mm Maksimalni premer obdelovanca: 140 mm Maksimalna dolžina obdelovanca: 700 mm Moč glavnega vretena (40% ED): 38 kW Največja hitrost glavnega vretena: 4.000 min-1 Hitrost hitre hoje X / Z: 30 / 40 m/min Nosilec orodja: 3 x diskasti revolverji z do 11 gnanimi orodji vsak, oz. revolver za obdelavo koncev Nedpfjydfpkjx Abbscl

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja: 600 mm Dolžina struženja: 850 mm Premer vrtenja nad posteljnim vozičkom: 290 mm Krmiljenje: Siemens 840D Dolžina struženja: 850 mm Premer struženja nad mizo: 600 mm os X: 220 mm os Z: 950 mm Nsdpfx Aboydfpdobecl Krmiljenje: Siemens 840D Število obratov: 0–4500 vrt/min Revolver za orodje: 2 kosa Vrtina vretena: 65 mm Premer vrtenja: 290 mm Hitrost podajanja X/Y: 25 m/min Hitri pomik X/Z: 25 m/min Delovna višina: 1200 mm

Stanje: zelo dobro (rabljeno), Wheel diameter – max. 300 / 400 mm Nsdpfsydfn Tsx Abbocl Wheel width 76 mm Module – max. 6 Module – min. 0.5 Control system BWO CNC 921 Stroke slide displacement 94 mm/stroke Stroke 82 mm Strokes per minute 75 – 1000 spm Number of teeth 5 – 200 Cutter arbor mount SK 45 Table diameter 400 mm Total power requirement 50 kW Machine weight approx. 7.5 t Space required approx. 5.0 x 3.8 x 3.4 m Machine in very good condition!

Stanje: rabljeno, Premer kolesa - maks. 1000 mm Širina kolesa 160 mm Modul - maks. 7 Modul - min. 0,5 Razdalja miza - spodnji rob drsnika 230 mm Število hodov 31 - 175 hodov/min Oprimek orodja MK 4 Skupna potrebna moč 6 kW Ncedpfx Abeydfn Hsbsl Teža stroja cca 5,2 t

Stanje: rabljeno, Vrtljaji vretena: 18 - 1280 min⁻¹ Nsdpfeydfnyox Abbocl Premer - standardno orodje: 270 - 400 mm Skupna potrebna moč: 5 kW Modul: 0,5 - 9 Dimenzije D x Š x V: 2,30 x 2,0 x 1,4 m Teža stroja pribl.: 1,7 t Naprava za profiliranje brusilnih polžev, vključno s popolnim kompletom menjalnih koles.

Stanje: rabljeno, Leto izdelave: 1999, Največja teža obdelovanca: 2000 g Rabljena tehtnica za uporabo na tlačnih livarskih strojih do mase obdelovanca 2000 g. Naprava je bila pri proizvajalcu pregledana in obnovljena. Zamenjana sta bila tehtna celica, krmilna plošča in razni manjši deli. Ncedeydfntspfx Abbjl

Stanje: rabljeno, Leto izdelave: 2006, Table length: 3000 mm Table width: 1500 mm Laser power in watts: 4000 Equipment/features: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TFL 3200 high-frequency aggregate, maintenance-free turbo radial blower, mirror telescope - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste Nodpfxjydfngo Abbjcl - Drives: Maintenance-free three-phase servo motors - Additional high-dynamic Xp-axis - Quick-change system for cutting head - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure control - APC capacitive height regulation and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLAS - ContourLAS for the production of smaller holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Compressed air cutting - PCS Process Control System - Microweld - Spray device for safe thick sheet processing - Automatic shutdown - Work area lighting - Control: Sinumerik 840D; open PC-based control, easy operation, online help, integrated e-shop, diagnostic function, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, completely encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin

Stanje: rabljeno, Leto izdelave: 1999, x-travel 5,850 mm y-travel 1,200 mm Njdpfx Aeydfmisbbecl z-travel 2,000 mm Control HEIDENHAIN TNC 430 D Table size 6,120 x 1,000 mm Table load capacity 20,000 kg Internal coolant supply 20 bar Chip conveyor included HEIDENHAIN HR-410 handwheel Tool changer for 60 tools Tool holder ISO 50 Motor power 30 kW Working feed rate 5,000 mm/min Rapid traverse 12,000 mm/min Spindle speed 20 – 3,000 rpm Total power requirement 41 kW Machine weight approx. 31 t

Stanje: rabljeno, Leto izdelave: 1999, x-travel: 3,400 mm y-travel: 1,250 mm z-travel: 2,000 mm Control: TNC-430 PA Table size: 4,700 x 1,200 mm V-axis travel: 500 mm Tool holder: ISO 50 Nsdpfx Aeydfmcsbbscl Milling head – swivelling 0.001º/0.001º degree Main motor: 37 kW Chip conveyor included Handwheel: HR-410 Tool changer: 60 positions Milling head: Automatic 45º head Machine weight approx. 35 t - Automatic 45º head - Automatic 45º head 0.001º/0.001º degree - 45º head – max. spindle speed 3,000 rpm - 45º head tool holder: ISO-50 - Twist head: infinitely variable - Front bearing diameter: 150 mm - AITEK pick-up station for 45º and twist heads - RENISHAW MP 16 + SP2/1

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel: 1000 mm y-axis travel: 1000 mm z-axis travel: 950 mm Control system: FANUC Pro-3 Feed rate X/Y/Z axis: 1 - 50,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Nedpfx Aeydflxobbecl Tool holder: HSK-A 100 Spindle speed: 20 - 12,000 rpm Spindle motor: 25 / 30 kW Milling spindle torque: 420 Nm Spindle diameter at front bearing: 110 mm B-axis: 360 x 0.001° Pallet size: 2x 800 x 800 mm Table load capacity: max. 1,800 kg Workpiece size: 1,000 x 950 mm Max. workpiece height: 1,000 mm Tool magazine with 188 positions Max. tool length: 475 mm Tool diameter: 320 mm Max. tool weight: 20.00 kg Total power consumption: 65.00 kW Machine weight approx. 30.00 t Space requirement approx. 8.00 x 5.30 x H3.50 m Horizontal machining center with FANUC Professional 3 control, NC rotary table, electronic handwheel, chip conveyor, coolant filter KNOLL VRF450/2300, through-spindle coolant, 188-position tool magazine. Spindle replaced in 2023. Machine can be inspected under power.

Stanje: rabljeno, Leto izdelave: 2003, x-axis travel: 1,600 mm y-axis travel: 1,250 mm z-axis travel: 1,000 mm Pallet size: 1,000 x 1,250 mm Control: SIN840D Drive power 40% duty cycle: 38.00 kW Spindle speeds – stepless: 20 – 10,000 rpm Drive power 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Tool holder: SK50 Feed rate X/Y/Z axes: 20 – 15,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min B-axis: -150° / +80° x 0.001° Feed rate B-axis: 3,600°/min C-axis: 360 x 0.001° Rapid traverse C-axis: 1 – 3,600 rpm Table load: 3,000 kg Tool magazine with 240 stations Tool diameter: 110 mm Tool diameter with 2 free pockets: 250 mm Tool length max.: 650 mm Tool weight max.: 15.00 kg Total power requirement: 75.00 kW Ncedpfsydflrex Abbsl Machine weight approx.: 55.00 t Space requirement approx.: 12.50 x 8.00 x 4.20 m 5-axis machining center with SIEMENS Sinumerik 840D control Electronic handwheel Operating mode 4 240-tool magazine 4-pallet storage system Measuring probe TS641 BLUM laser Coolant system Coolant through spindle Chip conveyor Coolant chiller

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter 640 mm Turning length 1,185 mm Control system: SINUMERIK 840D Maximum workpiece diameter 640 mm Distance between spindle heads 1,500 mm Slide I: X1 / Y1 / Z1 / B Travel in X-direction 550 mm Travel in Y-direction 180 mm Travel in Z-direction 1,185 mm B-axis 240° Feed rate X-axis 0 - 40,000 mm/min Feed rate Y-axis 1 - 24,000 mm/min Feed rate Z-axis 1 - 70,000 mm/min Feed rate B-axis 1 - 20 rpm Rapid traverse X/Y/Z 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00/11.00/7.50 kN Tool holder HSK 63 Milling spindle speed 10 - 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque 60 / 100 Nm Number of tools in magazine: 46 pcs Max. tool length 350 / 200 mm Tool diameter 80 mm Tool diameter with 2 free adjacent spaces 120 mm Max. tool weight 6 / 10 kg Slide II: X2 / Z2 Travel in X-direction 180 mm Travel in Z-direction 1,050 mm Feed rate X-axis 1 - 24,000 mm/min Feed rate Z-axis 1 - 36,000 mm/min Rapid traverse X + Z axes 24 / 36 m/min Feed force Z / X S6: 11.00/9.00 kN Turret (indexable) 12 positions Tool holder DIN 69880 Ø40 Driven tool stations - number: 12 Driven tool speed 1 - 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm Slide III Z3 mm Travel in Z-direction 1,150 mm Feed rate Z-axis 1 - 36,000 mm/min Rapid traverse Z-axis 36.00 m/min Feed force Z-axis S6: 13.00 Nm Main spindle ISM90 Main spindle speed 10 - 4,000 rpm Drive power 100% duty cycle 36.00 kW Drive power 40% duty cycle 45.00 kW Torque at 40% / 100% duty cycle 800 / 630 Nm Spindle bore 80 mm Counter spindle speed 10 - 5,000 rpm Drive power 100% duty cycle 21.00 kW Drive power 40% duty cycle 28.00 KW Torque at 40% / 100% duty cycle 320 / 240 Nm Spindle bore 80 mm Total connected load 70.00 kW Machine weight approx. 20.00 t Space requirement approx. 8.50 x 4.50 x H3.10 m Machine with SIEMENS SINUMERIK 840D control, main and counter spindle, chip conveyor, oil mist separator, DMG Automation WH10top. Ncsdpfx Aboydfllsbsl Main spindle ISM90: hollow clamping unit, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial hollow clamping unit, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off device with integrated conveyor belt, automatic safety hood, differential pressure clamping. With coolant pump frame: - Pump 1: 17 l/min at 80 bar - Pump 2: 20 l/min at 8 bar - Pump 3: 40 l/min at 20 bar No coolant system included, previously connected to central supply. Accessories: Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off gripper for turret

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: hidrostat, vrsta goriva: dizel, velikost pnevmatike: 20.5R25, stanje pnevmatik: 70 odstotek, število sedežev: 1, prostornina žlice: 2,6 m³, Leto izdelave: 2016, obratovalne ure: 4.855 h, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, Kolesni nakladalnik Hitachi ZW180-5B Leto 2016 4.855 delovnih ur Hitromenjalni priklop Centralno mazanje Brez ADBLUE Ncedpfx Aeydflfjbbol

Stanje: novo, lastna masa: 7.300 kg, največja dovoljena obremenitev: 26.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Šasija: vroče pocinkana, lesen pod s 70 mm debeline, 18 pritrdilnih obročev, 12 žepov za kole, 2 rampi, vsaka dolžine 3.110 mm x 760 mm širine, plezalni trak na zunanji strani ramp in zadnji klančini, hidravlične enodelne rampe, višina nalaganja: 880 mm, vključuje prikazovalnike obremenitve osi. Doplačila: zadnja os kot krmiljena os: 3.500 €, opozorilne table + razsvetljava in rotacijska luč: 200 €, razširitev na 3 m z lesenimi vložki: 300 €, hidravlični premik ramp: 1.000 €. -- Pridržujemo si pravico do napak v tisku, sprememb in dopolnitev, slike so simbolične -- Več podatkov na:! Ncjdpfxoydfk Ue Abbel

Stanje: rabljeno, lastna masa: 3.600 kg, največja dovoljena obremenitev: 12.400 kg, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2015, dolžina tovornega prostora: 4.480 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: jeklo, velikost pnevmatike: 445/45R19.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: v prihodu / v tranzitu, jeklena nadgradnja, priključki za zrak+luč za vlečno kljuko, 2 osi, BPW osi, tandem, listnate vzmeti, stranska zaščita, sprednja podpora, nihajna zadnja vrata. Nadgradnja: tristranski kiper priklopnik s povišanimi stranicami (600 mm). Vse informacije brez garancije, saj je priklopnik v prihodu! Informacije o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane! Ncjdpjydfkuofx Abbjl

Stanje: rabljeno, prevoženi kilometri: 144.000 km, moč: 170 kW (231,14 KM), prva registracija: 05/2014, vrsta goriva: dizel, lastna masa: 5.985 kg, največja dovoljena obremenitev: 7.515 kg, skupna masa: 13.500 kg, velikost pnevmatike: 265/70 R 19,5, konfiguracija osi: 4x2, medosna razdalja: 3.260 mm, naslednji pregled (TÜV): 07/2026, barva: črn, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, skupna višina: 63.350 mm, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, kabina, servovolan, zapora diferenciala, Lokacija vozila: v prihodu / v tranzitu, ClassicSpace, jekleni nadgradni del, vzmetni sedež, zadnje okno, senčnik, 6-stopenjski menjalnik, ABS (protiblokirni sistem), zapora diferenciala, listnato vzmetenje, vlečna kljuka z zračno-svetlobno-hidravlično povezavo, pritrditvene zanke, zelena okoljska nalepka. Medosna razdalja: 3260 mm. Nadgradnja: tristranski prekucnik, jeklene stranice, zložljive, vzmetno podprte, kolutne zavore na sprednji osi, bobnaste zavore na zadnji osi, 3 sedeži. Podatki so informativni, ker je vozilo v prihodu! Podatki o dodatni opremi brez garancije, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Ncsdpfxeydfkns Abbsl

Stanje: rabljeno, prevoženi kilometri: 220.500 km, moč: 331 kW (450,03 KM), prva registracija: 06/2016, vrsta goriva: dizel, lastna masa: 14.840 kg, največja dovoljena obremenitev: 17.160 kg, skupna masa: 32.000 kg, konfiguracija osi: 8x4, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 2, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, centralno zaklepanje, dodatne luči, greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, nizka raven hrupa, računalnik na krovu, servovolan, tempomat, zapora diferenciala, Lokacija vozila: v prihodu / v tranzitu, jeklena nadgradnja, montažna kabina, 1x zračni sedež, ogrevan sedež, zadnje steklo, električna ogledala, ogrevana ogledala, električno okno levo, električno okno desno, klimatska naprava, senčnik, tempomat, ABS (protiblokirni sistem), regulacija zdrsa pogona (ASR), stalna zavora, priključek za dodatni pogon, avtomatski menjalnik, zapora diferenciala, meglenke, rotacijska luč, listnato vzmetenje, bočni nagib levo, priključki za zrak+luč za vlečno kljuko, aluminijast rezervoar, strešno okno, ekološka značka zelena. Ncjdpfx Abeydfkhsbsl Nadgradnja: Meiller tristrani kiper z bočno nagibom levo. Vse informacije brez garancije, ker je vozilo v prihodu! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, predprodaja in napake so možni!

Stanje: rabljeno, prevoženi kilometri: 321.620 km, moč: 375 kW (509,86 KM), prva registracija: 01/2015, vrsta goriva: dizel, lastna masa: 13.569 kg, največja dovoljena obremenitev: 12.431 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x6, medosna razdalja: 3.600 mm, naslednji pregled (TÜV): 05/2026, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 2, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, centralno zaklepanje, dodatne luči, greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, nizka raven hrupa, pogon na vsa štiri kolesa, spojka prikolice, tempomat, zapora diferenciala, Vehicle location: Bovenden, ClassicSpace cab, Mercedes PowerShift 3, steel body, assembly house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), differential lock, fog lights, work lights, rotating beacon, storage box, leaf suspension, Bordmatic (left), towing hitch with air, electrical and hydraulic connections, aluminum tank, roof hatch, green environmental sticker. Wheelbase: 3,600 mm. Body: Meiller 3-way tipper. Drum brakes on front and rear axles, velour seat covers for driver and passenger, M-cab ClassicSpace, 2.30 m wide, 320 mm tunnel, comfort locking system with central locking, 2 remote control keys, Mercedes PowerShift 3, gearbox G 330-12/11.63-0.77, 390 l tank (on left), 650 x 565 x 1250 mm, aluminum, engine OM471, I6, 12.8 l, 375 kW (510 hp), 2500 Nm, front wall height 1,000 mm. Loading height approx. 1,680 mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors! Ncodpfjydfkbox Abbjl

Stanje: rabljeno, Stroj za izdelavo knjižnih platnic - Case Maker Hörauf BDM 60 z avtomatsko nastavitvijo s programske plošče Buchdeckenmaschine / Case Maker Hörauf BDM 60 Leto 1999 - serijska številka: 0/68026 Min. format: 105 x 170 mm - max. format: 410 x 720 mm Debelina platnic: 0,1 do 2,5 mm Maksimalna hitrost: 60/min. Podajalnik platnic Avtomatska nastavitev prek programske plošče - nadzorna plošča Nadzorna plošča z vrtljivim zaslonom - prečna rezalna naprava Enota Holtmet Stiskalna postaja Ncsdpfx Ajydfi Robbjl Sesalni prenosni valj Iznašalni trak z valji Spletni video-pregled po WhatsApp - MS Zoom – Telegram Na zalogi v Emskirchenu/Nürnbergu – takoj na voljo – možno testiranje

Stanje: rabljeno, prevoženi kilometri: 896.156 km, moč: 302 kW (410,61 KM), prva registracija: 01/2012, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, stanje pnevmatik: 60 odstotek, konfiguracija osi: 8x2, medosna razdalja: 7.100 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 450 l, barva: zelen, vrsta prenosa: samodejen, število prestav: 16, emisijski razred: Euro 5, vzmetenje: drugo, skupna dolžina: 10.220 mm, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2011, Oprema: ABS, klimatska naprava, parkirni grelec, tempomat, žerjav, = Additional Options and Accessories = - Refrigerator - PTO (Power Take-Off) = Further Information = General Information Cab type: SC Technical Information Number of cylinders: 6 Axle Configuration Front axle: Tire size: 385/55R22.5; Tire tread: 60%; Reduction: single reduction; Suspension: parabolic spring Nsdpfx Abjydfi Debjcl Rear axle 1: Tire size: 385/55R22.5; Tire tread: 40%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 295/60R22.5; Tire tread: 30%; Reduction: single reduction; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Tire tread: 40%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 19,565 kg Payload: 14,435 kg Gross vehicle weight: 34,000 kg Functional Crane: Hiab 422EP-5 HIPRO, year of manufacture 2011 Layout Number of sleeping berths: 1 Condition Damages: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We manage used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet current standards, and comply with the high demands of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website: