Egmix Baltic OÜ

Stanje: rabljeno, Industrijski stroj za ravnanje, ravnalnik stabilizatorjev, stroj za upogibanje, rabljena oprema Proizvajalec: Schneider Tip: Richtmaschine Stabilisator Leto: 2016 Električni podatki: 400V, 16A Iodpfsxnq Dtsx Ah Dstn Skupne mere: Širina: 1900 mm Globina: 1250 mm Višina: 1660 mm

Stanje: rabljeno, Leto izdelave: 2011, Tlak 160 t Skupna potrebna moč 18,5 kW Teža stroja pribl. 13,5 t Isdpsxnkcpefx Ah Dotn

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 700 mm, stiskalna sila: 16 t, delovna višina: 1.050 mm, višina središča: 1.050 mm, Avtomatska ravnalna naprava, mehansko generalno obnovljena, dobi novo krmiljenje SIMATIC S7-1500, Drive Controller CPU 1504D TF. Maksimalna razdalja med konicama 500 mm, ravnalna sila 16 t, hod ravnanja 20 mm, prazni hod 95 mm, delovna višina 1050 mm, priključna moč 10 kVA, povprečna poraba 1,3 kW. Iodpfxjxldiqo Ah Dotn Možnost: Stroj je lahko opremljen z dvižnim transporterjem (skozi stroj), po želji kupca tudi z dovodnimi/odvodnimi trakovi ter z varnostno ograjo. Trenutno je stroj opremljen z eno ravnalno postajo, možna je razširitev.

Stanje: novo, Pressure: 60 t Max. stroke: 300 mm Max. bending capacity (flat): 300 x 16 mm Working speed: 10 mm/sec Control: NC Tool height: 300 mm Total power requirement: 5.5 kW Machine weight approx.: 1,530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press brake with a wide range of combination options. Whether tube bending, profile punching, or sheet metal cutting – with the appropriate accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction-hardened support pins - NC control Highlights - control panel with digital display - easy tool change - hardened support pins - hydraulic speed control Itsdpfxexfb Ikj Ah Den The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer in Turkey. The images are for orientation purposes only and do not represent scale-accurate depictions of the machine.

Stanje: novo, Biegeradius min. 190 mm Vierkantstahl 20 x 20 mm Flachstahl 100 x 7 mm Rundstahl 22,0 mm Winkelstahl 100 x 10 mm Abmessung L-B-H 900 x 430 x 310 mm Maschinengewicht ca. 33.0 kg. Eigenschaften - Zum exakten Kalt- und Warmbiegen von Flach-, Rund- und Vierkantstählen - Stabile Bauart zum Festschrauben auf der Werkbank - Stufenlos einstellbarer Biegeanschlag - Mit Exzenter-Schnellspannung zum rationellen Arbeiten - Ablesbarer Biegewinkel bis 120° - Hohe Wiederholgenauigkeit durch Biegewinkelanschlag - Ideal für Reparaturwerkstätten und Schlossereien Biegeleistung kalt warm Flachstahl 100 x 7 mm 100 x 15 mm 65 x 12 mm 75 x 20 mm Rundstahl 22 mm 27 mm Vierkantstahl 20 x 20 mm 25 x 25 mm Winkelstahl 100 x 10 mm 100 x 15 mm Itodoxcuyhjpfx Ah Djn Lieferumfang - Biegeplatte - Winkelanschlag stufenlos - Klemmblock mit Exzenterspanner - Materialanschlag

Stanje: novo, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Minimum bending radius 190 mm Isdpfx Ajxcux Roh Dstn Round steel 18.0 mm Machine weight approx. 33.0 kg. Features: - For precise cold and hot bending of flat, round, and square steels - Robust design for bolting to the workbench - Continuously adjustable bending stop with locking pin - With eccentric quick-clamping for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to bending angle stop - Ideal for repair shops and metalworking shops Bending capacity cold hot Flat steel 100 x 5 mm 100 x 15 mm 65 x 10 mm 75 x 20 mm Round steel 18 mm 27 mm Square steel 16 x 16 mm 25 x 25 mm Angle steel 60 x 8 mm 100 x 12 mm Scope of delivery: - Sharp / round bending plate - Radius bending plate R 20 / R 25 - Set-off block - Bending plate for round bar - Set-off plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Stanje: dober (rabljeno), Leto izdelave: 2007, Znamka: SCHIAVI Model: HFBs 100/3 Itjdpoxaz Igofx Ah Djn Nazivna sila: 100 ton Dolžina miz: 3110 mm Širina delovne mize: 90 mm Delovna višina brez dviga: 910 mm Največja razdalja med mizami: 450 mm Nazivni maksimalni hod: 250 mm Globina labodjega vratu: 405 mm Razdalja med stebri: 2700 mm Maksimalni tlak: 303 MPa Količina olja: 126 dm³ Največja dolžina (zasedeni prostor): 4000 mm Moč motorja: 7,5 kW

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Tlak: 6 t Hod: 1020 mm Skupna potrebna moč: 3,5 kW Možno je ravnanje samo med vrhovi Itjdpfx Aew Ng D Teh Djn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201805015, delovna dolžina: 4.100 mm, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 300 mm, skupna širina: 1.550 mm, skupna dolžina: 3.560 mm, skupna višina: 2.850 mm, stiskalna sila: 185 t, skupna masa: 18.000 kg, potrebna višina: 3.440 mm, dolžina mize: 4.100 mm, vgradna višina: 500 mm, Little-used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic front supports Isdpswync Hefx Ah Detn ESA 660W CNC control LAG press brakes embody the synthesis of Italian technological innovation, attention to detail and design, and extensive Chinese manufacturing capabilities. These values, combined with top-quality European components, allow LAG to offer its customers press brakes, shears, and insertion machines with the best price-performance ratio on the market. This is the top-of-the-range press brake, equipped with accessories and automation for high-profitability performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Double pump: one main power pump for the machine operation, one for crowning management - DSP AP safety system - Touch-screen control panel housed in electric cabinet - Sliding front support arms - Touch-screen numerical control - 4-axis (X-R-Z1-Z2) reference rear backgauge model GRP-4

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23-9044, skupna širina: 1.560 mm, skupna dolžina: 3.540 mm, skupna višina: 2.800 mm, stiskalna sila: 50 t, skupna masa: 6.700 kg, dolžina mize: 2.550 mm, potovalna razdalja osi X: 600 mm, moč: 5,5 kW (7,48 KM), razdalja med stojali: 2.120 mm, vgradna višina: 2.800 mm, obratovalna hitrost: 150 mm/s, hod: 250 mm, višina mize: 910 mm, globina grla: 405 mm, vrsta vhodnega toka: trifazni, Schiavi Macchine HFBs 50.25 Press Brake, 4 axes (X-R-Y1-Y2), year 2006, fully overhauled with new Task SK12 CNC control and new front safety device by Nuova Elettronica. Equipped with 4 manual rear supports. Itsdpfxewybhps Ah Djn The HFBs press brakes represent the most technologically advanced model for automating the bending process. Combined with a dedicated hydraulic system and state-of-the-art software, the HFBs series offers sheet metal fabrication companies an effective means to increase their competitiveness. HFBs press brakes are particularly well-suited for integration into robotic bending cells.

Stanje: zelo dobro (rabljeno), Pressure 6.3 t Reach 200 mm Stroke 200 mm Ijdpfx Ahowuu A Ao Detn Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand operation, various attachments

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FDM-150E/3000, obratovalna hitrost: 7 mm/s, hitrost vzvratne vožnje: 9 mm/s, skupna masa: 10.000 kg, skupna dolžina: 2.750 mm, skupna širina: 800 mm, skupna višina: 3.100 mm, stiskalna sila: 150 t, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, HYDRAULIC PRESS FOR BENDING The FDV-150E/3,000 double-column hydraulic press belongs to the F series and is custom-designed for bending operations. It features an optimized hydraulic system operating at a pressure of 295 Bar, ensuring long-lasting durability and reliable performance. The machine fully complies with all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES - Built with a rigid, fully-welded fixed-frame structure made exclusively of S355JR steel. - The frame is stabilized and machined after welding to ensure perfect parallelism and precision. - Designed and engineered using finite element software analysis. - Equipped with upper and lower machined tables made of C45E steel with DIN-650 T-slots. The upper table ensures perfect alignment by means of four 80 mm diameter cylindrical side guides with maintenance-free, anti-friction bimetallic bushings. - Lower table features a slotted surface of 3,100 mm x 600 mm. CYLINDERS AND HYDRAULIC UNIT - Two main double-acting cylinders with chromed plungers and maintenance-free wear-resistant guides. - Single-speed motorized hydraulic power unit, including a cylinder pressure release valve. - Glycerine-filled pressure gauge with readout in tonnes. ELECTRICAL INSTALLATION AND SAFETY - Equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touchscreen mounted on the electrical cabinet. Enables programming of semi-automatic and automatic operations, force, stroke length, and dwell time. Capable of storing up to 300 programs/recipes; all above parameters can be stored per recipe. Itodpfxswpg D Ue Ah Don - Operated via a low-voltage electric foot pedal. - For maximum safety, the press is fitted with category IV photoelectric safety barriers at the front working area, two fixed side guards, and a rear access-guard with magnetic interlock safety switch. TECHNICAL SPECIFICATIONS MODEL: FDM-150E/3000 Press force: 150 t Motor power: 11 hp Piston stroke: 250 mm Working speed: 7 mm/s Return speed: 9 mm/s Maximum pressure: 295 Bar Front clearance: 3,200 mm Side clearance: 500 mm Vertical working gap (clear distance between tables): 550 mm Working height: 950 mm Overall front width: 2,750 mm Overall side width: 800 mm Overall height: 3,100 mm Weight: 10,000 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.900 mm, dolžina mize: 10.000 mm, skupna širina: 3.660 mm, skupna dolžina: 10.200 mm, višina mize: 900 mm, širina mize: 2.545 mm, stiskalna sila: 100 t, skupna masa: 26.000 kg, obratovalna hitrost: 9 mm/s, hitrost vzvratne vožnje: 14 mm/s, pritisk: 320 letvica, moč: 4 kW (5,44 KM), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER-LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor Power kW 4 Motor Ventilation Switch Power kW 0.37 Ijdpfxjwkvmns Ah Dotn Bridge Travel Motor Power kW 0.75 Working Speed mm/s 3 Approach Speed mm/s 9.2 Return Speed mm/s 14.4 Max. Pressure Bar 320 Usable Area mm 10,000 x 2,545 Ram Stroke max. mm 450 Max. Open Height mm 600 Lateral Travel mm 2,120 Portal Travel mm 9,140 Working Height mm 900 Total Length mm 10,200 Total Width mm 3,660 Height mm 2,900 Weight kg 26,000 The TL-100/10000E hydraulic press belongs to the T/NC series and is specifically designed for straightening welded structures and cut plates. As with all our hydraulic presses from this series, its design facilitates the loading and unloading of large parts. Thanks to the lateral movement of the cylinder and longitudinal movement of the bridge, different pressing points can be accessed without having to reposition the workpiece. The machine meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • Electro-welded frame made exclusively of S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and accuracy. • Constructed and designed with finite element software. • The longitudinal movement of the bridge is achieved by a frequency inverter and toothed belt. • The lateral movement of the head is motorized. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with honed sleeve, chrome plated piston, and maintenance-free wear guides. • Equipped with a removable and replaceable cushion to prevent piston wear and machined on the end to accommodate the tool. • Features a standard anti-rotation device for the cylinder and a calibrated front with limit switches for cylinder stroke adjustment. • Motorized hydraulic unit with two speeds and automatic shut-off of fast speed. • Cylinder decompression valve. • Pressure regulator. • Glycerine pressure gauge with tonnage display. ELECTRICAL SYSTEM AND SAFETY • The control panel features a selector switch for manual or semi-automatic operation. • There is also a selector switch for choosing between rapid approach and slow working speed. • Operation via a pendant control with emergency stop and low-voltage control. • Includes a button to confirm the operating cycle.

Stanje: rabljeno, BRACKER RN 280 RADIALNA KOVALNA STISKALNICA ZA KOVICE PROIZVAJALEC: BRACKER, IZDELANO V ŠVICI MODEL: RN 280 ZMOGLJIVOST (PREMER STEBLA KOVICE PRI NATEZNI TRDNOSTI 370N/MM²): 1,0 mm – 12,0 mm DELOVNI TLAK: 14 – 88 PSI MAKS. KOVIČENJE (PRITISK): 340 KG ČAS KOVIČENJA: 0,1 – 5,9 SEKUND Itjdpfjwh N H Njx Ah Djn DELOVNI HOD: 5,0 mm – 40,0 mm POGONSKI MOTOR: 0,74 KM NAPAJANJE: 220V, 3-FAZNI TOK TEŽA STROJA: 340 KG DIMENZIJE STROJA (d x š x v): 1220 x 915 x 1930 mm DODATNO: - BRACKER NOŽNI PEDAL ZA AKTIVACIJO - ROČNA NASTAVITEV VIŠINE RADIALNE KOVALNE GLAVE NA DVOJEM PRAVOKOTNEM VODILU - NASTAVITEV PRITISKA Z MANOMETROM

Stanje: novo, Press force 300 t Working speed 3-8 mm/sec Stroke 500 mm Return speed 15 mm/sec Table size 3000 x 1500 mm Tank capacity 45 l Travel path x / y 2600 x 1000 mm Clearance 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely milled with CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump from Bosch Rexroth - Hydrapack or Badeston hydraulic valve - Hydraulic block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/controller ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens Itjdpfovxw Hmjx Ah Den CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01 ,16092-03 - Two-hand control operation - Reset and emergency stop button - Safety cable with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s plant. - Hydraulic oil is not included in the price. - All handling costs (such as crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty includes the delivery of all spare parts required for repairs and service calls to the machine. Damaged parts must be returned to the manufacturer after replacement. - This warranty does not cover parts damaged by improper use.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1970, Pressure 6 t Reach 250 mm Stroke 550 mm Ijdpfx Aevpaadsh Dstn Table size 650 x 500 mm Total power requirement kW Machine weight approx. 3.5 t Space requirement approx. 1.2 x 1.0 x 2.8 m

Stanje: dober (rabljeno), Hydraulic press, bending machine, straightening machine, section straightening system, coil straightening machine, coil straightener, shaft straightening system, combined bending-straightening press, section bending machine, flat bar bender, horizontal bending/straightening press, horizontal bending machine - Hydraulic press: straightening system, straightening machine, section straightening system with roller conveyor - Pressing force: 10 tons - Pressure: max. 100 bar Itjdpfevgu Hasx Ah Don - Roller conveyors: 2x 1000/170/H1110 mm / Rollers Ø 56 x 140 mm - Transport dimensions: 1335/1220/H1470 mm - Weight: 807 kg

Stanje: rabljeno, Technical Details: Pressure: 2.5 t Reach/Throat Depth: 155 mm Maximum Ram Stroke: 280 mm Distance Table to Ram: 450 mm Clamping Plate on Table: 260 x 1000 mm Ram Advance Speed: 0.08 m/s Ram Return Speed: 0.32 m/s Ram Bore: Ø 20 x 45 mm Height Above Floor: 930 mm Total Power Requirement: 1.1 kW Machine Weight approx.: 500 kg Itsdpfju Nfv Usx Ah Dsn Machine Dimensions (LxWxH) approx.: 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations.

Stanje: rabljeno, Technical details: Pressure: 200 t Itedpfxsu Nfrpo Ah Don Stroke: approx. 200 mm Table size: L:1200 x W:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press Eccentric Bending Machine - Jaw holder: LxW 1200 x 220 mm - Jaw adjustment: 200 mm, traversable - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, shims, angle stops, and marking gauges Included as per list (i.D.).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5 m straightening beam. This allows you to process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated via the proven Stierli stroke fine adjustment control. This makes it very easy to use and enables fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyor, NC control, laser measurement, etc. (Note: The photo does not show the actual machine.) Iedjufhzvspfx Ah Dotn

Stanje: novo, Pressure: 40 t Max. stroke: 300 mm Max. bending capacity - flat: 250 x 16 mm Working speed: 10 mm/sec Control: NC Tool height: 250 mm Total power requirement: 4 kW Machine weight approx. 1190 kg Space requirement approx. 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press with a wide range of combination options. Whether bending pipes, punching profiles, or cutting sheet metal – with the appropriate accessories, the HP 40 is a multifunctional machine among presses. Standard equipment: - Ergonomic tool clamping table - Quick tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC Control Highlights: - Control panel with digital display - Quick tool change - Hardened support pins - Hydraulic speed regulation Ijdpfsuddfbex Ah Djtn The HP 40 is manufactured in Turkey by a renowned producer for our sales brand "GERD WOLLF Maschinenfabrik". The photos are for reference only and do not represent the machine to scale.

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Iedpfx Aot Hw Ameh Djtn Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Iodpfx Aet Hwwdeh Dotn Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: dober (rabljeno), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press Itsdpfx Ahjt Hmhlj Den - Bending/straightening press: hydraulic profile bending machine - Base frame: heavy-duty design, mobile - Hydraulic unit: unfortunately no type designation - Piston rod: Ø 55 mm / stroke: 200 mm - Individual components: see photos - Overall dimensions: 1180/1060/H1000 mm - Weight: 445 kg

Stanje: novo, Pressure: 20 t Max. stroke: 200 mm Max. bending capacity – flat: 200 x 10 mm Working speed: 10 mm/sec Iodpfx Ahetq Du Re Detn Control: NC Tool height: 150 mm Total power requirement: 2.2 kW Machine weight: approx. 640 kg Space required: approx. 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with a wide range of combination options. Whether it’s pipe bending, profile punching, or sheet metal cutting – with the right accessories, the HP 20 is a multifunctional machine among presses. Standard equipment - Ergonomic tool clamping table - Easy tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control Highlights - Control panel with digital display - Simple tool change - Hardened support pins - Hydraulic speed regulation The HD 180 is manufactured for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer in Turkey.