Cnc Bote

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.020 mm, proizvajalec krmilnikov: OKUMA, število osi: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, driven tools with C-axis capabilities, and synchronized thread cutting for increased productivity. The machine is equipped with an integrated tool setter for precise measurements and a programmable tailstock for added versatility. If you are looking for a high-quality lathe, consider the Okuma LU15 M-2SC 1000 horizontal lathe we offer for sale. Contact us for further details. • Turrets: 2 tool turrets • Driven tools: Yes (C-axis and powered units) Cgedoy Nmi Djpfx Ahxst • Thread cutting: Synchronized thread cutting • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, can travel with the carriage, automatic clamping • Tailstock quill: Controllable via M-code • Draw tube bore: 55 mm (partial hollow chuck cylinder) • Interface: DNC interface RS-232C • Cooling system: High-performance pump (8 bar at 30 l/min) • Programming: ONE TOUCH dialog NC (automatic job plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter spindle: No Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 230 mm, pomik po osi Z: 950 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 810D, število osi: 2, Horizontal lathe from 1999. This Weiler E35 D is equipped with a Siemens Sinumerik 810D control system, featuring Weiler D1 operator software and a 12.1-inch TFT color flat-screen display. It includes a coolant unit with a flow rate of 30 l/min and a quick-change toolpost. If you are looking for high-quality turning capabilities, you should consider the Weiler E35 D machine we offer for sale. Contact us for further details. • Control: Siemens Sinumerik 810D with Weiler D1 operator software • Display: 12.1-inch TFT color flat-screen Codsy Nlvcopfx Ahxegt • Operating voltage: 400 V • Control voltage: 24 V • Connected load: 14 kW • Rated current: 26 A • Frequency: 50 Hz • Main fuses: 35 A • Coolant system: 30 l/min at 0.4 bar • Toolholder: Multifix quick-change system size B • Features: Teach-in functions; graphic-supported contour programming; V-24 interface; electronic handwheel for manual contour tracking Additional Equipment • Supplied accessories: 1 toolholder; fixed center; spindle connector; set of keys; manuals; chip guard; movable splash guard; chuck guard with limit switch monitoring • Optional equipment included: Fixed steady rest with roller jaws (12-150 mm); adjustable hollow spindle stop; lever collet for DIN 6343-48 (173E) Technical Specification Counter spindle: No Driven tools: No

Stanje: rabljeno, Leto izdelave: 2005, Premer struženja 5-42 mm Dolžina struženja 3200 mm Krmiljenje Traub TX8i X-os 50 mm Z-os 50 mm Teža stroja pribl. 4000 kg 21817 ur Cgsdpfx Ajy Nd U Dohxjt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 245 mm, pomik po osi Z: 210 mm, moč vretenovega motorja: 7.500 W, število osi: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a dual-spindle turning cell with two turrets, a maximum spindle speed of 4,000 rpm, and an 8" chuck size. The machine is designed for high-volume production with automatic loading and unloading. If you are looking for a high-quality lathe, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details. • Axes: X1, Z1, C1, X2, Z2, C2 • Travel: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (twin front spindles), max. speed 4,000 rpm, power 7.5 kW (option 11 kW), high-speed spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: high-rigidity monoblock construction • Cutting performance: • Turning (S45C): Cutting depth 1.6 mm; feed rate 0.22 mm/rev; cutting speed 160 m/min • Drilling: Ø22 mm; feed rate 0.56 mm/rev • Thread cutting: M16 • Grooving: up to 8 mm • Precision: Positioning accuracy ±2 µm; repeatability ±2 µm • Coolant/System: 290-liter tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automatic; designed for unmanned, high-volume production • Driven tools: No • Condition: Good, operational; regularly maintained since 2008 Additional Equipment • Portal loader with workpiece reversing unit • Work stockers: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter spindle: Yes Cgsdpfx Ahey Ndu Djxjt Driven tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, potovalna razdalja osi X: 255 mm, pomik po osi Z: 1.500 mm, moč vretenovega motorja: 11.500 W, skupna širina: 1.800 mm, skupna masa: 2.500 kg, največja dolžina izdelka: 3.535 mm, število osi: 2, Horizontalni stružnica iz leta 1998. Ta PADOVANI E255/1500 je opremljena z glavnim vretenomotorjem z močjo 11,5 kW in skupno nameščeno močjo približno 14 kW. Stroj ima dolžino 3535 mm in širino 1800 mm, tehta pa 2500 kg. Če iščete visokokakovostno stružnico, razmislite o PADOVANI E255/1500, ki jo ponujamo v prodajo. Za dodatne podrobnosti nas kontaktirajte. • Motor Z-osi: 1,4 kW • Motor X-osi: 0,7 kW • Motor za mazanje osi: 0,1 kW • Motor za hladilni sistem: 0,15 kW Cgsdpfjy Ndp Uox Ahxet • Skupna nameščena moč: ~14 kW Dodatna oprema • Držalo za orodje vključeno Tehnične specifikacije Kontrasnega vretena: Ne Pogonska orodja: Ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, potovalna razdalja osi X: 300 mm, pomik po osi Z: 754 mm, proizvajalec krmilnikov: HEIDENHAIN, število osi: 3, This 3-axis WEMAS DZ 270 was manufactured in 2002. It features a turning diameter of 300 mm and a turning length of 754 mm. The machine is equipped with a HEIDENHAIN control unit and a 12-position disc turret by DUPLOMATIC, enabling efficient tool management. If you are looking for a high-quality lathe, consider the WEMAS DZ 270 horizontal lathe we are offering for sale. Please contact us for further details. • Turning diameter: 300 mm • Turning length: 754 mm • Turret brand: DUPLOMATIC (Italy) • Turret positions: 12-position disc turret • Driven tools: Yes (axial and radial tool holders visible) • Main supply voltage: 3x 400 V ~ • Frequency: 50 Hz • Total power requirement: 19 kVA • Rated current: 50 A • Control voltage: 230 V ~ / 24 V = • Lighting: 230 V / 40 W Additional equipment • Chip conveyor: Integrated slat conveyor • Included tooling: Various Garant tool holders, VDI holders, ER collet chucks Technical Specification Cgodsy Nc E Iepfx Ahxot Counter spindle: No Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 580 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 18.500 W, skupna masa: 7.200 kg, število osi: 2, Torno horizontal de 2006. Este Johnford SL60 dispone de un volteo sobre bancada de 580 mm y un paso de husillo de 76,5 mm. Está equipado con un revólver portaherramientas de 12 posiciones y un motor de husillo de alto par con velocidad de hasta 3.500 rpm. Si busca un torno de alta calidad, considere la máquina Johnford SL60 que tenemos a la venta. Contáctenos para más detalles. Cedpoy Naiqsfx Ahxogt • Paso de husillo: 76,5 mm • Guías: robustas guías prismáticas (para la absorción de vibraciones) • Revólver portaherramientas: 12 posiciones • Contrapunto: no (retirado/no montado) • Horas de funcionamiento: 30.713 h • Total de piezas producidas: 234.092 Equipamiento adicional • Plato autocentrante hidráulico Schunk de tres garras Rota 315/86 • Transportador de virutas • Juego de portaherramientas • Documentación completa (Johnford & Fanuc) • Copia de seguridad de parámetros Especificación técnica Contrahusillo: No Herramientas motorizadas: No

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain Digital Display, Year of Manufacture 2004, in Excellent Original Condition This machine comes from the prototype workshop of a renowned German mechanical engineering company. CE-compliant!! Technical data: Year of manufacture: 2004 Weiler Primus VC Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Possible thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: engageable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (LxHxW) Cgsdpfxoy I U Dyj Ahxjt Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE Declaration of Conformity About the machine: The Weiler Primus VC is the smallest model in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and an impressive 4 kW drive output (40% duty cycle). This compact machine with big capabilities is ideal wherever maximum precision is needed in tight spaces, such as in optics, electrical, and automotive workshops, laboratories, and even Formula 1. For sale is a Weiler Primus VC lathe with Heidenhain digital display, year of manufacture 2004. This lathe is in excellent original condition and was only lightly used in the prototype construction area of its previous company. The control is very easy to use. The guides are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler Primus VC under power at our premises. You can find more lathes from well-known manufacturers on our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 23.723 h, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 235 mm, pomik po osi Z: 1.140 mm, moč vretenovega motorja: 22.000 W, skupna masa: 6.000 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P300, število osi: 3, Ta 3-osni stružnica Okuma Genos L300 E-M je bila izdelana leta 2014. Ima največji premer struženja 300 mm in dolžino struženja do 1000 mm. Stroj je opremljen z vretenom z največjo hitrostjo do 3800 vrt/min in robustnim revolverjem z 12 postajami. Če iščete visokokakovostni CNC stružni stroj, razmislite o Okuma Genos L300 E-M, ki ga ponujamo v prodajo. Za dodatne podrobnosti nas kontaktirajte. • Velikost vpenjalne glave: 203 mm • Najv. premer obdelovanca: 300 mm • Najv. dolžina obdelovanca: 450–520 mm (do 1000 mm opcijsko) • Pomik v osi Z: 450–1140 mm • Premer vretena: 65 mm • Revolver: 12 postaj • Tip orodja/vmesnik: VDI/BMT • C-os: Da Tehnične specifikacije Cgodpfx Ahey I Uu Esxjt Proti-vreteno: Ne Pogonjena orodja: Da

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Ravne aktivne orodje – 2 kosa Cedpfx Aey I I Ncjhxjgt Kotno, 90°, aktivno orodje – 3 kosi + vsi nosilci orodij, ki so vidni na fotografiji.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krmiljenje MITSUBISHI M 700 Prehod palice 37,5 mm 2 x 12-pozicijski revolver z gnanimi orodji 2 x C-os 2 x Y-os Glavno / protivretensko vreteno FMB polnilnik palic turbo 3-36 Sistem za pripravo hladilne tekočine Knoll KF 10 Transportni trak za odrezke Renishaw merilna sonda Lovilec delov Codoy I Dilopfx Ahxjgt Transportni trak za končne izdelke Zračni filter 2 x vpenjalna glava za vpenjalne tule Nosilci orodja in vpenjalne tule

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.502 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 96E425, premer struženja nad prečnim suportom: 32 mm, stružna dolžina: 200 mm, premer struženja: 32 mm, vrtljajska hitrost (min.): 6.000 obr/min, Stroj z avtomatskim podajalnikom palic, transformatorjem, filtrom za oljno meglo in protipožarnim sistemom 'Reacton'. Stroj je v brezhibnem delovnem stanju. Codpfxoy Iy E Ne Ahxsgt Y-os na drugem vretenu. Popoln komplet pogonskih orodij.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 190 mm, pomik po osi Z: 350 mm, skupna masa: 2.100 kg, število osi: 2, Ta 6-osni stružnica Index ABC 63 je bila izdelana leta 1999. Ima nazivno moč 13 kW in maso stroja približno 2100 kg. Če iščete visokokakovostni stružni stroj, razmislite o horizontalni stružnici Index ABC 63, ki jo imamo na voljo za prodajo. Za več podrobnosti nas kontaktirajte. Cgjdpfoy Iwrmsx Ahxet • Omrežna napetost: 400 V • Krmilna napetost: 24 V • Frekvenca: 50 Hz • Nazivna moč: 13 kW Tehnične specifikacije Nasprotno vreteno: Ne Pogonsko orodje: Ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 410 mm, pomik po osi Z: 280 mm, moč vretenovega motorja: 30.000 W, skupna masa: 6.800 kg, število osi: 2, Horizontal lathe from 2001. This Monforts RNC 400 A features a maximum swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-station disc turret and a powerful three-phase asynchronous main spindle motor with a speed range of 30-4000 rpm. If you are looking for a high-quality lathe, consider the Monforts RNC 400 A, which we have available for sale. Contact us for further details. • Swing over bed: 410 mm • Maximum diameter over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 Cgodpfx Ahjy If A Hsxot • Bar capacity/material passage: 65 mm • Main drive: Three-phase asynchronous motor (100%/40% duty cycle), 20.5/30 kW • Maximum torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: Mounted on separate guideway, manual clamping, 900 mm traverse, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shank diameter (VDI 40), direction logic and face gearing • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping unit (max 65 mm) • Coolant system: 310 l tank, 3 bar, 40 l/min • Control and equipment: 256 kB memory (expandable to 1.5 MB), programming according to DIN 66025, 2D/3D simulation, serial interface RS-232C, tool compensation (up to 600 tools), constant cutting speed, threading/tapping • Construction: 60° slant bed, welded steel design on reinforced concrete foundation with 3-point mounting; hydrostatic guides (X-axis) • Tool measurement device • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle: No Driven Tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 410 mm, pomik po osi Z: 280 mm, moč vretenovega motorja: 30.000 W, skupna masa: 6.800 kg, število osi: 2, Horizontal lathe from the year 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4,000 rpm. If you are looking for a high-quality lathe, you should consider the Monforts RNC 400 AC, which we are offering for sale. Contact us for further details. Csdoy Ifptjpfx Ahxsgt • CNC memory: 256 kB (buffered RAM), expandable up to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity: 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-position disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; maximum power 13.6 kW (25% duty cycle); maximum torque 28.9 Nm; maximum speed 4,500 rpm • C-axis: 0-25 rpm; 300 Nm holding torque • Tailstock: Separate guideway; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; welded steel construction on a reinforced concrete base with 3-point support • Power supply: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow chuck • Parts catcher • A6 draw tube for collet chuck • 200 mm suction nozzle • 1 GB memory expansion • Network card • Driven tools with thread cutting without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 340 mm, pomik po osi Z: 2.000 mm, moč vretenovega motorja: 20.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 810D, število osi: 2, Horizontal lathe from 2008. This Weiler E50x2000 features a 2000 mm centre distance and a 570 mm swing over bed. It has an 83 mm spindle bore and a maximum spindle torque of 1600 Nm. The machine underwent a complete overhaul in 2026, incorporating significant enhancements for improved performance. If you are looking for a high-quality lathe, consider the Weiler E50x2000 offered for sale. Please contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Centre distance: 2000 mm • Centre height: 280 mm • Swing over bed: 570 mm • Max. turning diameter over cross slide: 340 mm • Cross slide travel: 340 mm Cgsdpey H E Akefx Ahxet • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: - Gear stage 1: 1–625 rpm - Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Toolholder system: Multifix size C or Parat size 3 • Availability: Machine available soon • Overhaul: Completely overhauled in 2026 • Hardening and grinding of all bedways; grinding of tailstock guides • Overhaul of complete bed and cross-slide unit (grinding/scraping all guides) • Renewal of bed slide guideways • Renewal or shimming of keyways and lower guides • Installation of a toolholder system on console (Multifix C or Parat size 3) • Overhaul of the complete spindle housing assembly • Regrinding of the main spindle (internal/external tapers and faces) • Renewal of main spindle bearings • Renewal of ballscrew on X-axis incl. bearings • Renewal of ballscrew on Z-axis incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Replacement of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of faulty rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of central lubrication system • Renewal of flexible cables and coolant hoses in working area/to monitor • Replacement of membrane keyboard (monitor) • Renewal of cable drag chains • Painting in standard colours (standard texture) • DGUV and high-voltage test with test protocol • Backup of machine parameters/software • Geometric acceptance test according to DIN 8605 Additional Equipment • Chip conveyor: used device included • Optional accessories: additional chip conveyor available The machine is being overhauled in July, photos are for reference only and may not represent the final appearance. Technical Specification Counter Spindle: No Driven Tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 48 mm, pomik po osi Z: 236 mm, moč vretenovega motorja: 750 W, skupna višina: 400 mm, skupna masa: 85 kg, število osi: 2, Horizontal lathe from 2006. This EMCO Concept Turn 55 offers a maximum turning diameter of 52 mm and a maximum workpiece length of 215 mm. It features an 8-position tool turret and a spindle speed range of 120–4000 rpm. If you are looking for a high-quality lathe, consider the EMCO Concept Turn 55 that we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing diameter over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum workpiece length: 215 mm • Spindle/tool mounting • Spindle mount: Factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Chuck spindle through-hole: 15 mm • Diameter of automatic chuck: 76 mm • Speed range: 120–4000 rpm • Mechanical gear stages: 2 • Maximum torque: 14 Nm • Tooling: • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/drives/accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Positioning deviation X: 0.008 mm • Positioning deviation Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MT1 • Automatic tailstock quill stroke: 15 mm • Lubrication: • Guideways: Oil • Other lubrication points: Grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % Codpfx Asy H Etcjhxogt • Frequency: 50/60 Hz • Connected load: 0.85 kVA • Maximum fuse: 12 A • Dimensions/weight/noise • Center height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) Technical Specification Driven Tools: No Counter Spindle: No

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krmiljenje Siemens C 200 – 4D Premer struženja: 100 mm Dolžina struženja: 280 mm 8-pozicijski revolver z gnanimi orodji 6-pozicijski revolver z gnanimi orodji Obratno število vretena: 6000 min-1 Maks. prehod palice: 60 mm Zadnja vrtalna enota za 5 postaj Transporter odrezkov Knoll Hladilni sistem Cgodpfxsy Hxtcj Ahxet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 550 mm, pomik po osi Z: 1.130 mm, moč vretenovega motorja: 22.000 W, proizvajalec krmilnikov: FANUC, model krmilnika: 21i-T, število osi: 2, Horizontal lathe from 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It is equipped with a programmable tailstock and a 12-inch three-jaw chuck, enhancing operational efficiency and precision. If you are looking for a high-quality lathe, consider the DOOSAN S 550 L we offer for sale. Please contact us for further details. • Condition: Fully functional, ready for demonstration; machine is still under power; increased performance and precision • Capabilities: max. workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width over bed slide 280 mm • Spindle: nose ASA A2-8; spindle bore taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearing: roller/angular + axial; speed override 50-150; motor AC 18.5/22 kW (continuous/30 min) • Turret/tool mount: V12 turret; standard tool shank 25 mm; max. boring bar Ø50 mm • Axes: rapid traverse X: 20, Z: 24 (units as specified) • Control/electronics: NC unit F-21iTB; total power consumption 31 kVA • Pumps: hydraulic pump motor AC 1.5 - 4P kW; way lubrication pump motor AC 0.02 - 4P kW; coolant pump motor AC 0.4 - 2P • Additional features: steady rest and tailstock move when hooked onto the slide Additional equipment • Programmable tailstock • 12" 3-jaw chuck • Self-centering steady rest SLU 3.1 • Automatic tool setting arm Technical Specification Counter Spindle: No Driven Tools: No Cgjdpfx Ahjy Hrgcjxst

Stanje: rabljeno, Leto izdelave: 2000, Revolver 1 – Čelno/vzdolžno struženje 155/280 mm Csdpfjy Hppzex Ahxjgt Revolver 2 – Čelno/vzdolžno struženje 82/120 Gildemeister Sprint 65 mm Vrtina vretena (glavno vreteno) 79 mm (s kleščnim vpenjanjem 65 mm) Vrtina vretena (podvreteno) 65 mm (s kleščnim vpenjanjem 42 mm) Vrtljaji vretena 25-5000 obr./min (glavno vreteno) C-os – 5000 obr./min Revolver z 8 postajami Krmiljenje: Siemens Sinumerik 840 C Opremljeno z: Magazin za nalaganje palic proizvajalca Simag model 65.1 – 3200 mm – leto 2000 Transportni trak za ostružke Razni nosilci orodij

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 243 mm, pomik osi Y: 50 mm, pomik po osi Z: 740 mm, skupna masa: 9.600 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TD, število osi: 4, Cet atelier de tournage horizontal CNC 4 axes Romi GL 350B a été fabriqué en 2014. Il offre un diamètre maximum de pièce de 350 mm et une vitesse de broche de 4 000 tr/min. La machine est équipée d'une contre-broche avec une plage de vitesse de 6 à 6 000 tr/min et d'une tourelle à 12 postes. Si vous recherchez un tour de haute qualité, le Romi GL 350B proposé ici pourrait vous intéresser. Contactez-nous pour plus de détails. • Axes : • Rotation maximale de l'axe B : 830° • Capacité : • Diamètre maximal de la pièce : 350 mm • Passage de barre maximal : Ø 64 mm • Broche principale : • Nez de broche : A2-8 • Contre-broche : • Incluse Cedey E Nirspfx Ahxogt • Vitesse : 6–6 000 tr/min • Nez de broche : A2-5 • Tourelle : • 12 positions • Prise d'outil/interface : BMT-65 • Dimensions : • Profondeur de la machine : 2080 mm Caractéristiques techniques Contre-broche : Oui Outils entraînés : Non

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 220 mm, pomik po osi Z: 1.065 mm, skupna masa: 2.800 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 802D, število osi: 3, Cette Romi C420 à 3 axes a été fabriquée en 2013. Elle offre une capacité de tournage sur banc de 430 mm et une distance entre pointes de 1 000 mm. La machine est équipée d'une commande Siemens 802D et atteint une vitesse de broche maximale de 4 000 tr/min. Si vous recherchez un tour de haute qualité, pensez à la Romi C420 que nous proposons à la vente. Contactez-nous pour plus d'informations. • Capacité : Cgsdpfoy E Nh Ijx Ahxot • Diamètre du mandrin : 150 mm • Capacité de passage en barre : 53 mm • Tournage sur banc : 430 mm • Tournage sur chariot transversal : 200 mm • Distance entre pointes : 1 000 mm • Broche : • Puissance du moteur : 10 CV • Configuration : • Tourelle porte-outils à 4 positions • Contre-pointe : • Dimensions : • Dimensions approximatives : 2,75 m x 1,30 m Spécifications techniques Contre-broche : Non Outils entraînés : Non

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 2.800 obr/min, potovalna razdalja osi X: 280 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 30.000 W, skupna višina: 1.915 mm, skupna širina: 2.035 mm, skupna masa: 5.650 kg, največja dolžina izdelka: 3.821 mm, število osi: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-position tool turret and a three-jaw power chuck with a diameter of 305 mm. If you are looking for a high-quality lathe, you should consider the horizontal lathe DOOSAN Puma GT 3100 M, which we have available for sale. Please contact us for further details. • Siemens S828D control with touchscreen and 15-inch ShopTurn display • 3-axis CNC horizontal lathe with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Maximum turning diameter: 376 mm • Maximum turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Maximum torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-position tool turret with BMT65P tool holders • Max. speed of driven tool: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite design • 30° slant bed construction • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with work area lighting • Interface for bar feeder • Oil wipers • Electronic safety coupling for X- and Z-axis • Electrical connection: 400 V, 3-phase, 50 Hz • Total connected load: approx. 47 kVA Csdpjy E I Hiefx Ahxegt • Unused (as new) Additional Equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 105 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 22.000 W, skupna višina: 1.915 mm, skupna širina: 1.985 mm, skupna masa: 6.550 kg, proizvajalec krmilnikov: SIEMENS, največja dolžina izdelka: 3.857 mm, število osi: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station turret and driven tools, offering versatile machining capabilities. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN PUMA 2600 SY II that we have available for sale. Contact us for further details. • Siemens S828D control with touchscreen and 15" ShopTurn display • 6-axis configuration with driven tools, Y-axis and sub spindle • Main and sub spindle with integrated motor spindle technology • Cylindrical roller bearings, accuracy class P4, lifetime lubrication • Main spindle chuck diameter: 255 mm • Sub spindle chuck diameter: 175 mm • Hydraulic hollow clamping system • Hollow clamping cylinder • 24-position turret (BMT65P interface) • Automatic tool setting arm, electric swivel • Dynamic spindle speed control • Sub spindle with tailstock function • Coolant flow max. 448 l/min • Oil flow 336 l/min • Electronic safety clutch for X and Z axes • Swing over bed: 780 mm • Swing over cross slide: 630 mm • Max. turning diameter: 255 mm • Max. turning length: 760 mm • Bar capacity: 76 mm • Max. workpiece weight including chuck: 250 kg • Main spindle bore: 91 mm • Max. torque: approx. 706 Nm • Sub spindle bore: 52 mm • Spindle speed up to 6000 rpm • Motor power: approx. 18.5 kW • Torque: approx. 118 Nm • Main spindle C-axis: 360° resolution 0.001°, speed 200 rpm, torque approx. 1508 Nm • Sub spindle C-axis: 360° resolution 0.001°, speed 200 rpm, torque approx. 121 Nm • Turret: 12 driven tool positions out of 24 Cgjdpfx Asy E Izashxet • Max. speed of driven tools: 5000 rpm • Driven tool power: approx. 7.5 kW • Driven tool torque: approx. 50 Nm • Rapid traverse X and Z: approx. 30 m/min; Y: approx. 10 m/min • Bed inclination: 30° • Coolant tank capacity: approx. 220 liters • Coolant pump pressure: 7 bar • Hydraulic tank: approx. 20 liters • Automatic central lubrication system • Electrical connection: AC 380 V, 3-phase, 50/60 Hz • Total connected load: approx. 69.27 kVA • The machine has never been used (as new condition) Additional Equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction unit • Boring bar holder, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Set of reduction sleeves: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • Reduction sleeves for U-drills: 40/20, 40/25, 40/32 • Two Eppinger driven toolholders BMT65P, straight, with external cooling Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Nova, nerabljena stroj!!! DOOSAN LYNX 2100G Leto 2021/10 Maks. premer struženja mm 170 Maks. dolžina struženja mm 330 Standardna velikost vpenjalne glave col 6 Maks. navor vretena N·m 118 Maks. hitrost vretena obr/min 6000 Maks. moč vretena kW 18,5 Lovilec kosov Operacijski sistem – FANUC touch Transporter za ostružke Cromar Dokumentacija stroja Cgjdey E Ixxspfx Ahxet