CKM Maschinenhandel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Kledpfx Adeyv In Iekep Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2259, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.900 mm, največja hitrost vrtenja: 24.000 obr/min, model krmilnika: Siemens 840D, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Pomik X-os: 6.000 mm Pomik Y-os: 3.500 mm Pomik Z-os: 1.900 mm b-os: +/- 110° c-os: 360° Hitrost vrtenja: 24.000 min⁻¹ Vreteno: HSK 63 Motor vretena: 25 kW Velikost mize: 6.000 mm x 2.500 mm (razpored lukenj 22H7 / M16) Pomik X + Y: 30.000 mm/min Pomik Z: 28.000 mm/min Hitri pomik: 30.000 mm/min PODROBNOSTI STROJA Krmiljenje: Siemens 840D Kjdpfx Adjyv A Dkskelp Izmenjevalec orodij: 40 orodij OPREMA Vreteno: Fischer (tip MFWS 1709/30, 2 kosa) Rezkalna glava: Forest Line (tip: vilicasta glava, b-os nagib +/- 110°, c-os vrtljiv 360°) Richter transporter za odrezke (strgalo transporter) Blum merjenje orodja Postaja za odlaganje rezkalne glave (2 kosa)

Stanje: dober (rabljeno), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.150 mm, Krmiljenje: Siemens 840 D Powerline Držalo orodja: HSK-A63 Kljdsyvyy Aspfx Adkop Maks. število vrtljajev: 16.000 min⁻¹ Pomik po osi X: 3000 mm Pomik po osi Y: 2500 mm Pomik po osi Z: 1150 mm Os A: +/- 100 mm Os C: +/- 181,5 mm Velikost mize: 3000 mm x 2500 mm Opcija: Zunanji pihalni zrak Kinematika: vilasta glava

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 23.291 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 750 mm, dolžina mize: 3.200 mm, širina mize: 1.400 mm, TEHNIČNI PODATKI Kledpoyvub Uefx Adksp Pomik X-os: 3.200 mm Pomik Y-os: 1.400 mm Pomik Z-os: 750 mm Velikost mize: 3.200 x 1.400 mm PODROBNOSTI STROJA Vrsta krmiljenja: CNC Krmilni sistem: Heidenhain Obratovalne ure Obratovalni čas vretena: 23.291 h Delovni čas programa: 27.807 h Čas vklopa krmiljenja: 83.301 h Čas vklopa stroja: 73.907 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.700 mm, pomik po osi Z: 1.500 mm, hitrost podajanja osi Y: 50 m/min, dolžina mize: 6.000 mm, skupna širina: 3.000 mm, največja hitrost vretena: 22.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, nos vretena: hsk 100, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 6,000 mm Y-axis transverse travel: 2,700 mm Z-axis vertical travel: 1,500 mm Maximum interpolated axes speed: 50 m/min WORKTABLE Dimensions: 6,000 x 3,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece fixing: 28 mm, DIN 650 (H12), complete with leveling screws. T-slots direction parallel to Y-axis movement. UNIVERSAL HEAD WITH CONTINUOUS POSITIONING, ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation movement driven by direct drive motors and controlled by CNC as positioning axes. Automatic tool clamping. Allows for a 10° undercut. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle available power (S1/S6): 22/33 kW Spindle available torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK-A63 DIN 69893 HSK-A100 ELECTROSPINDLE WITH SEMI-AUTOMATIC REPLACEMENT SYSTEM: Spindle available power (S1/S6): 37/43 kW Spindle available torque (S1/S6): 140/165 Nm Maximum spindle speed: 12,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE FOR 55 TOOLS, HSK-A100 / HSK-A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator protection, equipped with arm for vertical tool change, with automatic tool preparation. "Fixed position" management. Axis clamping by hydraulic control Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Max tool diameter: 90 mm Max tool diameter with adjacent free slots: 160 mm Max tool length: 300 mm Max tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Max tool diameter: 100 mm Max tool diameter with adjacent free slots: 160 mm Max tool length: 450 mm Max tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Kodoyvtt Nepfx Adkolp Machine complete with: • Remote Heidenhain HR550 electronic handwheel • High-pressure coolant (water and air) through the spindle • Semi-automatic electrospindle change with HSK-A63 and HSK-A100 adapters • Wide range of tooling included with the machine • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Axis and electrospindle cooling system • User and maintenance manual and CE declaration of conformity

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: omejena funkcionalnost, CNC Gantry Milling Machine (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 A high-performance gantry milling machine designed for the machining of large workpieces. Main areas of application are the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: As per year of manufacture, partial overhaul required. This is a very high-quality machine, therefore absolutely worthy of modernization/complete overhaul – highly recommended. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm - Machining length: 11,000 mm - Passage width: 4,400 mm Kjdeyuptzspfx Adkjlp - Passage height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight total table: max. 112 t - Maximum permissible workpiece weight single table: max. 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling support: - Drive power for milling and drilling operations (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control system: SINUMERIK 880 - 2 x chip conveyors - Documentation - CE marking No guarantee for completeness or accuracy of technical specifications and equipment. Subject to prior sale. A detailed technical data sheet and further information on equipment available on request.

Stanje: dober (rabljeno), potovalna razdalja osi X: 12.000 mm, pomik osi Y: 7.300 mm, pomik po osi Z: 3.000 mm, skupna dolžina: 30.000 mm, dolžina mize: 12.000 mm, širina mize: 4.730 mm, skupna širina: 12.000 mm, skupna višina: 10.475 mm, obremenitev mize: 250.000 kg, skupna masa: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Manufacturer: Waldrich - Siegen - Model: PF-F-150(1)-530/400 X-axis: 12,000 mm Y-axis: 7,300 mm Z-axis: 3,000 mm W-axis: 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Traverse-type milling head Vertically adjustable crossbeam Horizontal hydrostatic spindle ram Milling spindle diameter: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angle milling head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2400 rpm Küma fixed head GB1D – 90 kW – 2400 rpm Küma angle head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – coolant through spindle at 20 / 40 bar Machine refurbished in 2004 by Schiess Bed – Table assembly: Renewal of sliding surfaces Regrinding of guideways Renewal of table drive Direct linear measuring system Hydrostatic guideway Gantry and crossbeam: Modification of adjusting spindle Trapezoidal spindle replaced with ball screw Direct linear measuring system New drive motors to increase feed speed of milling axes New milling slide with hydrostatic guideways Electrical System: Completely new control cabinet Completely new wiring Siemens Sinumerik 840D control – 6 axes Equipment: Completely new Raumag-Janich safety covers Completely new double swarf conveyor Large tool package Extensive clamping accessories Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Kedpeytrxkofx Adkslp Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine casings. Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute any representation or contractual terms. We recommend verifying all critical details.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, MOSTNA REZKALNA STROJ FPT INDUSTRIE TEHNIČNE ZNAČILNOSTI Znamka: Fpt Industrie Model: Dinox 350 (IAT) Leto: 2023 PickUp z 2 pozicijama Avtomatska tisočinka glava (2 ohišji) Menjava orodja Ksdpfx Adeytpfnskolp CNC: Heidenhain CENA IN VEČ INFORMACIJ NA POVPRAŠEVANJE (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MEHANIZACIJA, PINACHO, MORISEIKI, REZKALNI STROJ, STRUŽNICA, BRUSILKA, VRTALKA, PREŠA, LASER, ŠKARJE, UPORABLJALNIKI)

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Prodajamo našo Datron M8 letnik 2011. Stroj je priključen na elektriko in takoj pripravljen za delo! Vključno z orodjem, vakuumsko pritrdilno ploščo, pnevmatskimi vpenjali ter programersko programsko opremo! 10-mestni magazin za orodje (vključno z veliko orodji in nosilci) Rezkalno vreteno HSK25, 50.000 vrt/min Kjdpfoyti I Asx Adkolp Vključena programska oprema Primcam 2x pnevmatska vpenjala Vakuumska plošča vključno z vakuumsko črpalko Horizontalna vpenjalna naprava Hlajenje z alkoholom ali zrakom

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Millstep CNC Milling Machine PA8070V3, year 2021, and PAX8050V2, year 2015 – total of 6 units available CNC Gantry Milling Machine MillStep PA8070V3 – excellently equipped For sale are three CNC gantry milling machines, model MillStep PA8070V3 (special size), in excellent condition. These machines are ideally suited for precise machining of aluminum, plastics, wood, and non-ferrous metals, as well as for prototyping and small series production. Technical data • Travel: X 800 mm / Y 680 mm / Z approx. 200–240 mm • Work area: 800 × 625 mm • Repeatability: ±0.01 mm • Feed rate: up to 9 m/min • Linear guides: HIWIN profile rails • Ball screws on all axes Features • HF spindle 2.2 kW (up to 24,000 rpm) with ER25 collets • Hitachi frequency inverter WJ200 • 3-axis control with cncGRAF Pro • Vacuum tables 800 × 500 mm and 600 × 500 mm • Vacuum pump 1.5 kW • Minimum quantity lubrication (MQL) • Tool length sensor • Robust steel frame with chip drawers • Safety enclosure with protective doors The machine is fully operational, well-maintained, and can be inspected and tested by appointment. Location: 09474 Crottendorf Kledpfjyrx Shox Adkjp Price: EUR 5,900 net per unit (PA8070V3, year 2021) and EUR 3,900 net per unit (PAX8050V2, year 2015) – 3 units of each model available – On-site inspection possible (machines are still in operation) Shipping: available by arrangement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 29.081 h, Funkcionalnost: popolnoma funkcionalen, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard Drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes down to 0.1 µm / Rotary axes down to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, continuous movement on 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Operating Torque A/C: 450 Nm Clamping Torque Axes: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel type, with tool change arm) Magazine Capacity: 80 tools Kedpfxjyrndme Adkjlp Max. Tool Ø: 75 mm Max. Tool Ø with adjacent pocket free: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage control (software included) Probe for Workpiece Measurement/Alignment: Radio transmission, cycles included in CNC Monitoring Sensor for Vibration/Collision Detection: Response time approx. 1 ms External/Internal Coolant System (LEU/LEIUHP) Tank Capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar Through-Spindle Coolant: max. 30 l/min, max. 70 bar Additional Options/Features External Tool Spray Mist Compressed Air Through Spindle (High Speed) up to 24,000 rpm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.000 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 18.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 38 Nm, skupna masa: 65.000 kg, Initial commissioning: 2012 Control: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (below floor) with T-slots 18H12 / 250mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Kljdpfeyrdc Eex Adkep Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power demand: 85 kVA Dimensions, weights Space required (machine only, without peripherals): approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Opening doors on both sides - 10-station tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 68.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.200 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 167 Nm, skupna masa: 35.000 kg, Premiere mise en service : décembre 2014 Commande : Fidia Axe X : env. 2 200 mm Axe Y : env. 3 500 mm Axe Z : env. 1 200 mm Axe A : ± 100° Axe C : ± 275° Machine sous tension : env. 68 000 h Heures total broche : env. 26 500 h Table de bridage : 2 000 x 3 500 mm avec rainures en T Klsdeyrc Akepfx Adkep Tête à fourche 2 axes Puissance broche : 70 kW Vitesse de broche : max. 15 000 tr/min Couple : max. 167 Nm Porte-outils : HSK 100A Déblocage outil : hydraulique Entraînements axes linéaires Vitesse avance X, Y et Z : jusqu’à 50 m/min / 30 m/min Données de raccordement Tension : 400 V Fréquence : 50 Hz Dimensions, poids Encombrement machine hors périphériques : env. 8 000 x 6 000 x 5 000 mm Poids total : env. 35 000 kg Équipements supplémentaires - Installation de refroidissement - Changeur d’outils 26 positions - Carénage espace de travail - Convoyeur à copeaux En option, en supplément : - Palpeur de mesure radio - Laser BLUM État de la machine Entièrement fonctionnelle, en très bon état. Visible sous tension.

Stanje: rabljeno, Leto izdelave: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens type 840D PL spindle diameter 200 mm spindle power 85 kW clamping area 9000x2800 mm max. table load 40000 kg column passage 3400 mm rapid traverse spindle taper ISO 50 machine weight approx. 193.8 t space requirement approx. 22.4x10.2x8.2 m retrofit 2009 steep taper ISO 60 DIN 2079 spindle speed 12-450 rpm Milling heads: 1x WF 680/450 1x WFU 180/350 1x WFU 70/300 1x extension 550 mm for WFKs The technical data are manufacturer or operator details and therefore not binding for us. Prior sale reserved; exclusively our terms and conditions of business and sale apply. About us more than 400 own machines in stock over 15,000 m² storage area, crane capacity 70 t more than 10,000 accessory items for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Klsdpfjyq Sxljx Adkep

Stanje: rabljeno, Leto izdelave: 1991, x-Weg 5300 mm y-Weg 2500 mm z-Weg 1200 mm Tischbelastung 60000 kg Ständerdurchgang 2700 mm Werkstückhöhe - max. 1700 mm Tischabmessung 5000x2250 mm Steuerung Heidenhain Typ 430 Kledpfeyq Swhox Adkep Maschine wurde überholt machine is retofit Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen, Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2004, x-Weg 3000 mm y-Weg 3400 mm z-Weg 950 mm Aufspannfläche 2500x1600 mm Anzahl der Tische 2 Steuerung NUM Werkzeugwechsler 12 Pos Drehzahl 4,5-40.000 U/min Spindelaufnahme: HSK 40 Spindelmotor 6 kW Tischbelastung 850 kg Kjdpfxeyqv Eis Adkolp Spindel HF 100 A 45 Die technischen Daten sind Hersteller- bzw. Betreiberangaben und daher unverbindlich. Zwischenverkauf vorbehalten; es gelten ausschließlich unsere Verkaufsbedingungen. Über uns: Mehr als 400 eigene Maschinen auf Lager Über 15.000 m² Lagerfläche, 70 t Krankapazität Mehr als 10.000 Artikel und Zubehör für Ihre Werkstatt Wenn Sie interessiert sind, Maschinen, Produktionslinien oder Ihr Unternehmen zu verkaufen, kontaktieren Sie uns bitte. Weitere Angebote finden Sie auf unserer Website. Besichtigungen sind nach Terminvereinbarung möglich. Wir freuen uns auf Ihren Besuch! Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1994, X-travel 7000 mm y-travel 3500 mm z-travel 1000 mm Serial number 14908 Control Siemens Sinumerik 880 Clamping table 2 units Clamping table 3000x2500 mm Spindle power 42 kW Max. speed 4000 rpm Tool changer for 128 tools Tool holder SK50 Clamping surface 6800x2500 mm Column clearance 3200 mm Table load 20 t Universal angular milling head Straight head Extended straight head Coupled clamping surface 6800x2500 mm Max. table load per table 10 t Coupled 20 t Ksdpsyqvqlsfx Adkslp The technical data are provided by the manufacturer or operator and are therefore non-binding for us. Interim sale reserved; only our terms and conditions of business and sale apply. About us: Over 400 machines in stock More than 15,000 m² of storage space, crane capacity 70 t Over 10,000 accessories for your workshop If you wish to sell machines, production lines or your company, please contact us. Find more offers on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1971, x-hod 13.000 mm y-hod 2.750 mm z-hod 3.000 mm Hitrost vrtenja 600 vrt/min Vreteno ISO 50 Rezkalna glava 4 Št. stroja 11137 Tehnični podatki so navedeni po informacijah proizvajalca oziroma uporabnika in zato niso zavezujoči. Vmesna prodaja je pridržana; veljajo izključno naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, dvigalna kapaciteta 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali vaše podjetje? Kledpsyqvl Aofx Adkep Kontaktirajte nas. Dodatne ponudbe najdete na naši spletni strani. Ogled je možen po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: rabljeno, Leto izdelave: 1991, x-Pot 6200 mm y-Pot 1500 mm z-Pot 508 mm Krmiljenje Mazatrol Tip M 32 Višina obdelovanca 708 mm Izmenjevalec orodja 60 Vpenjalni stožec vretena ISO 50 Delovna površina mize 6200x750 mm Tehnični podatki so navedbe proizvajalca oz. lastnika. Zanje ne prevzemamo odgovornosti. Vmesna prodaja pridržana; veljajo izključno naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, se obrnite na nas. Kledpfx Adjyqvdrekep Druge ponudbe najdete na naši spletni strani. Ogled je možen po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: rabljeno, Leto izdelave: 1986, x-Weg 5300 mm y-Weg 3300 mm z-Weg 1300 mm Tischbelastung 50000 kg Ständerdurchgang 2600 mm Werkstückhöhe - max. 1700 mm Tischabmessung 5000x2000 mm Steuerung Heidenhain Kljdpfxjyqtm Rj Adkep Typ ITNC530 Maschine wurde überholt machine is retrofit Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2010, - Model: MECAPRO 3015 - Leto izdelave: 2010 - Velikost mize: 3050x1530 mm - Orodne postaje: 6 kosov Klsdpfx Aeypi Hqedkep - Vreteno: 4 kW - Vakuumska črpalka: 4 × Siemens 2,2 kW - Krmilnik: Mecanumeric CN7000ISO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2412178161400128, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 200 mm, skupna dolžina: 3.800 mm, skupna širina: 1.900 mm, skupna višina: 1.790 mm, največja hitrost vrtenja: 40.000 obr/min, The following machine is for sale: Klsdpfx Ajymznzsdkjp Pfeiffer Gantry Milling Machine SkyCNC WL2412 Ready to use! Complete package > Setup, Connect, Start Working Condition: Used, very good condition, fully operational Original price: €98,000 The machine can be inspected under power at our facility. Further detailed photos available on request. Affordable shipping, including suitable forklift in the truck, can be arranged. TECHNICAL DATA: Vacuum Table Working Area: 2500 x 1250 mm (medium format) Spindle: HSD 4.5 kW, 40,000 rpm, HSK E25 interface, liquid-cooled Z-axis: 200 mm Minimum quantity lubrication All axes with ball screw drives Including handwheel control Including automatic tool length measurement (automatic transfer to the system) External dimensions / Footprint: 3800 x 1900 x 1790 mm Weight: 2150 kg Year of manufacture: 2015 Tool changer: 10-position + 8 storage slots for manual tool changes (can also be programmed for automatic tool changes) Power supply: Three-phase 400V/AC, fuse protection 63A recommended (plug and cable included) Steel frame with high rigidity on 4 adjustable feet with robust linear guides. Suitable for machining non-ferrous metals, plastics, and wood. Cooling unit with pump (active cool 1500) 230V, 3.8A, max. 900W power consumption, 1500 W cooling capacity Weight: 41 kg, Dimensions: L 450 x W 330 x H 600 mm Vacuum pump (Becker Germany) KVT 3.100 3.4 kW, designed for continuous operation, maintenance-free, 100 mbar vacuum, Weight approx. 100 kg Soundproof box with insulation, dimensions: L 1050 x W 700 x H 570 mm Computer with control software, Fanuc ISO programming language, CAD system, machine setup program, comprehensive manuals on CD Further accessories included: 10x HSK E25 collet chucks, 6x HSK collet chucks CentroGrip® tool holders MR16 Mini, collet set CentroGrip® Ø1 – Ø10 (8 pcs), 2x CentroGrip® collet Ø8, 3x CentroGrip® collet Ø6, 2x CentroGrip® collet Ø10, MR16 Mini collets: 1x Ø1, 1x Ø2, 1x Ø2.5, 1x Ø3, 1x Ø4, 1x Ø5, 3x Ø6, 1x Ø7, 1x Ø8, 1x Ø8.5, 1x Ø10, 2 tool clamping wrenches, 1 MR16 spanner, sealing rubber for vacuum table, vacuum fleece pads, 3 plexiglass safety covers, 3D dial gauge Terms: We guarantee the machine is currently operational. No further guarantee is provided. No statutory warranty is assumed. The risk passes to the buyer upon loading. Payment is due 100% in advance before loading. An invoice with VAT stated will be prepared and sent electronically as a PDF. All future costs, losses, and warranty claims arising from the use or non-use of the machine by the buyer are excluded.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 42.832 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 760 mm, model krmilnika: FANUC SERIES 18i MB, razmak između stupova: 2.300 mm, DÉTAILS TECHNIQUES Course X: 3 000 mm Course Y: 2 100 mm Course Z: 760 mm Distance entre colonnes : 2 300 mm Dimension de la table : 3 020 mm × 2 010 mm Charge maximale sur table : 10 000 kg Cône de broche : ISO-50 Vitesse de broche standard : 6 000 tr/min Diamètre max. outil / logement vide : 127 mm / 215 mm Longueur max. outil : 350 mm Poids max. outil : 20 kg Ksdpfx Ajymxi Aodkolp Capacité changeur d’outils : 32 outils Avance rapide X : 20 000 mm/min Avance rapide Y : 15 000 mm/min Avance rapide Z : 15 000 mm/min Avance de coupe : env. 1 – 10 000 mm/min DÉTAILS DE LA MACHINE Commande CNC : FANUC SERIES 18i MB Puissance moteur broche (continu / 30 min) : env. 22 / 26 kW Heures de fonctionnement avance : 42 832 h Heures de fonctionnement automatique : 53 246 h ÉQUIPEMENT Changeur automatique de tête (avec tête de fraisage angulaire) Palpeur RENISHAW

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Heidenhain TNC640, miza 2.500 x 4.000 mm, osi X/Y/Z: 4.000/2.500/1.300 mm, 5-osna univerzalna glava, 18.000 obr/min, držalo orodja HSK-A63 po DIN 69893, 120 orodij, notranje hlajenje skozi vreteno (IKZ). Klsdpoymm Eljfx Adkjp

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control system: Siemens 840 D Travel distances: X = 10,000 mm, Y = 1,500 mm Extended spindle slide stroke: Z = 1,000 mm Increased clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 Taper: SK 50 Machining capacity in C45: Core drilling D=120mm, Thread tapping M55, Milling 100cm³/min Gantry construction with movable portal bridge and stationary clamping table. Clamping table equipped with crosswise clamping beams at 750 mm intervals. Standard platen fields omitted. Hydraulic clamping system with clamping bridges for axle machining incl. hydraulic unit Angular drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth coupling Automatic tool change into the angular head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with crosswise clamping beams every 750 mm Tool chain magazine on portal column with 30 pockets Machine cooling system Water/air heat exchanger integrated in control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Kedpfeymb Easx Adkjlp Partition wall with inspection window Chip conveyor with hinged belt design Mounting and alignment elements