Inplast LTD

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0306, skupna širina: 1.500 mm, skupna dolžina: 5.800 mm, skupna višina: 1.600 mm, vrsta vhodnega toka: trifazni, BEMA S.r.l. 800 td Nwjdpfx Aezgb Akeqqoh Well-maintained machine for freezer bags and ZIP bags. Please contact us for further information.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1973, skupna širina: 1.950 mm, skupna dolžina: 5.650 mm, skupna višina: 1.920 mm, priključek za stisnjen zrak: 7 letvica, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, obratovalni tlak: 7 letvica, skupna masa: 2.300 kg, vrsta vhodnega toka: trifazni, KAPACITETA 250 kos/min KAPACITETA (OTRPLJENA VREČKA) 100 kos/min ŠIRINA VREČKE 830 mm DOLŽINA VREČKE 70-1000 mm DEBELINA VREČKE 0,020-0,100 mm ŠTEVILO SERVO MOTORJEV 4 kosi SKUPNA MOČ 11 kW ŠIRINA STROJA 1760 mm DOLŽINA STROJA 5650 mm VIŠINA STROJA 1920 mm TEŽA STROJA 2300 kg STANDARDNE LASTNOSTI - S pomočjo zaslona na dotik je mogoče nastaviti oziroma spremljati dimenzije vrečke, število vrečk, proizvodno hitrost, količino vrečk v paketu ter število zaustavitev v skupnem seštevku. - Ena fotocelica omogoča rezanje tako potiskanih kot nepotiskanih vrečk. - Pogon vlečnih valjev z elektromotorjem s servokrmiljenjem omogoča rezanje pri visoki hitrosti ter z želeno natančnostjo. - Servokrmiljena varilna čeljust zagotavlja močan in kakovosten var. - S pomočjo servomotorno krmiljenega transportnega traku delujejo trakovi sinhrono s sistemom zlaganja. - Stoper valjčni sistem s servokrmiljenjem za boljše zlaganje. - Frekvenčni regulator napetosti odvijanja ovitkov. - Pnevmatski 'ballerina' sistem. - Samodejni sistemi za kontrolo robov. - Samodejna zaustavitev stroja, ko zmanjka materiala na kolutu. - Samodejna zaustavitev stroja s fotocelico, če odtis ni na pravem mestu. - Možnost izdelave iz PP, OPP, CPP, polietilena visoke gostote (HDPE), polietilena nizke gostote (LDPE) vrečk. STANDARDNA OPREMA - Enota za aplikacijo ročajev z ojačitvijo Nsdpjzga T Iefx Aqqewh - Enota za izsekavanje luknje za ročaj - Aparat za varjenje spodnje podpore - Aparat za izdelavo spodnjega pregiba (guse) - PE stranska varilna (izkopna) čeljust - PE dvojna varilna (majica/t-shirt) čeljust

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, - Največja širina folije je 800 mm Nsdpfezga Apox Aqqewh - Največja dolžina do približno 600 mm - Hitrost do 120 taktov/min - Debelina do 60 mikronov - Predelano na servomotor - Dodane frekvence za vodila in pogone - Antistatično - Dodatno nož za dvojno varjenje Stroj je star, a redno posodobljen in dobro vzdrževan. Obnovljen leta 1999. Za več informacij sem na voljo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2082, skupna širina: 1.700 mm, skupna dolžina: 5.450 mm, skupna višina: 1.900 mm, priključek za stisnjen zrak: 7 letvica, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, skupna masa: 1.500 kg, vrsta vhodnega toka: trifazni, KAPACITETA: največ 250 kosov/minuto ŠIRINA VREČKE: 80 mm – največ 800 mm DOLŽINA VREČKE: 70 mm – 1000 mm DEBELINA FOLIJE: 0,020 mm – 0,100 mm SKUPNA ELEKTRIČNA MOČ: 13 kW (380 V - 50 Hz) SERVO MOTORJI: 4 ENOTA FOTOCELICA: 1 SKUPNI DOVOD ZRAKA: min. 6 bar ŠIRINA STROJA: 1650 mm DOLŽINA STROJA: 5450 mm VIŠINA STROJA: 1900 mm TEŽA: 1475 kg STANDARDNA OPREMA Skozi zaslonsko upravljalno ploščo je možno nastaviti: dolžino vrečke, število vrečk, proizvodno hitrost, prikaz števila vrečk v paketu ter funkcijo zaustavitve pri doseženem skupnem številu. Na voljo je ena fotocelica. Omogočeno rezanje potiskanih in nepotiskanih vrečk. Z rezanjem pri visoki hitrosti in točnosti po zaslugi servo motorjem krmiljenih vlečnih valjev. Zmogljivo in kakovostno varjenje zagotavlja servo motorjem krmiljena varilna čeljust. Vlečni trakovi s sistemom sinhronizacije, nadzorovani s servo motorjem, omogočajo usklajeno delovanje do zlagalnega sistema. Servo motorjem krmiljeni vpenjalni valji zagotavljajo visokokakovostno zlaganje. Valji za navijanje s sistemom za krmiljenje napetosti (inverter). Pnevmatski sistem 'balerina'. Avtomatski sistem za nadzor robov. Avtomatska zaustavitev stroja ob koncu role. Nwsdpfezgaw Hjx Aqqeh Avtomatska zaustavitev ob nepravilni lokaciji tiska glede na fotocelico. Največji premer role: 800 mm. Možnost dela z materiali: PP, OPP, CPP, polietilen visoke gostote (HDPE), polietilen nizke gostote (LDPE), vrečke.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2138, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, ÖZM 1100 BLSD BOTTOM SEALING BAG MAKING MACHINE Machine length: 6600 mm Machine width: 1900 mm Machine height: 1750 mm Produced year: 2024 Capacity: 150 pcs/min Bag's length: 100 - 2000 mm Bag's width: 1100 mm max Film thickness: 0,007 - 0,200 mm Nodezd S A Aspfx Aqqowh Servo Motor (pulling roller motor): 5 kW Main motor (jaw motor): 1,5 kW Unwinder Motor: 0,75 kW Bobbin unwinder motor: 1,5 kW Hydraulic Bobbin Lifting Motor: 0,37 kW Border control motor: 0,25 kW Conveyor motor: 0,25 kW Upper jaw resistance: 3 kW Lower jaw resistance: 2,5 kW Slicing resistance: 1,1 kW Current Type: 3 - 50 Hz Working Voltage: 380 Volt Air Pressure: 6 Bar Total Power: 19 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.650 mm, skupna dolžina: 5.450 mm, skupna višina: 1.900 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, skupna masa: 1.475 kg, vrsta vhodnega toka: trifazni, CAPACITY 250 pcs / minute max. BAG WIDTH 80 mm – 800mm max BAG LENGTH 70 mm -1000 mm FILM THICKNESS 0.020 mm- 0.100 mm TOTAL ELECTRIC POWER 13 kW (380 V-50Hz) SERVO MOTOR 4 UNIT FOTOCELL 1 UNIT TOTAL AIR SUPPLY 6 Bar min MACHINE WIDTH 1650 mm MACHINE LENGTH 5450 mm MACHINE HEIGHT 1900 mm WEIGHT 1475 kg STANDARD FEATURES Through touch operator panel; length of the bag, pieces bag, production speed, visible bag pieces in the package, stop feature in the number of written in total counting.  There is one Photocell. Cut are printed and unprinted bags.  It cuts at high speed and with the desired measurement precision through to the servo motor controlled pulling rollers.  Strong and high quality welding is achieved through to the servo motor controlled welding jaw.  Through to the servo motor controlled belt system, belts work synchronously to the stacking system.  Through to the servo motor controlled stacking rollers, it provides quality stacking.  Warp rolls with inverter tension control system,  Pneumatic ballerina system,  Automatic edge control system,  Automatically stops when the roll runs out,  When the photocell print location is not correct, it automatically stops.  Nwsdpfx Aqozd N Ipsqjh Roll bobbin binding diameter max 800 mm  Ability to work in PP, OPP, CPP, High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), bags,

Stanje: zelo dobro (rabljeno), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic polymer to rectangular glass panels as part of a solar module production line. The polymer forms a seal to a second glass pane, which is applied in a subsequent production step. Feeding, application, and removal of the glass panels are carried out on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet numerous requirements with great precision. For this reason, only raw materials (glass, sealant) that conform to the specifications on the following pages should be processed. This helps ensure high-quality and safe production. Performance Data and Connection Values - Maximum transport speed: 18 m/min - Height of the glass running surface: 1100 mm - Height of the applied sealant bead: 0.5 to 1.2 mm - Maximum width of the applied sealant bead: 12.0 mm - Required constant pneumatic inlet pressure: 6.5 to 8.0 bar - Operating pneumatic pressure: 6.0 bar - Compressed air consumption (normal operation): 10 NL/min - Compressed air consumption (during drum change): 500 NL/min - Average energy consumption per hour: 10 kWh - Working temperature of sealant: 110°C to 130°C Nsdezdyh Hjpfx Aqqowh Environmental Conditions and Emissions - Minimum ambient temperature: +15°C - Maximum ambient temperature: +35°C - Maximum relative humidity: 75% - Sound level: less than 70 dB(A) Requirements for Sealant Drums Design: Material drum with lid D18 acc. to DIN 6644 – with foot (F1) and smooth outer surface (mantle version, smooth). - Capacity: 216 liters - Inner diameter: 571.5 mm - Height: 874 mm - Minimum wall thickness: 1.25 mm Processable Glass Panels Glass types: Processable are glass panels with smooth surfaces (float glass). Dimensions and Weights Smallest sizes – largest sizes – geometry - Length (LS): 1198 mm – 1200 mm - Width (BS): 498 mm – 600 mm - Thickness (DS): 1.8* mm – 5.0* mm Processable thermoplastic polymers are based on polyisobutylene (butyl). The polymer must be flowable at about 110°C to 130°C and exhibit a defined viscosity profile. Only materials that are proven in practical use and have been approved by the manufacturers of these substances as well as by Bystronic for your intended application should be used. For detailed product descriptions and information on handling, storage, and disposal of the polymer, please refer to the product and safety data sheets made available by the manufacturers. Dimensions of Gantry Robot with Glass Conveyor - Height x Width x Depth: 2800 x 1890 x 2735 mm - Weight of gantry robot: 850 kg - Weight of glass conveyor: 1400 kg Dimensions of Drum Pumps - Height x Width x Depth: 3320 x 1060 x 1200 mm - Weight (without drum): 850 kg - Weight (with drum): 1100 kg - Height H for drum pump FP1: 4400 mm - Height H for drum pump FP2: 4000 mm Dimensions of Control Cabinet - Height x Width x Depth: 2200 x 1800 x 600 mm - Weight: 450 kg The applicator was operated with butyl material. Condition: used From test laboratory, mint condition, only a few operating hours for testing! Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications may change!) If you have further questions, we will be happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 1976, Funkcionalnost: nefunkcionalno, Brusilnik za žage Widmann model HKS 700 Nwodsy Swlnepfx Aqqsh

Stanje: dober (rabljeno), Stroj za ovijanje v folijo AFFELDT SA-05-30, proizvajalec: AFFELDT, tip: SA-05-30, letnik izdelave: 2010, serijska številka: 706 Njdpfsy Ez S Ssx Aqqewh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Használt nagy teljesítményű tekercses szemeteszsák gyártógép eladó. Tekercsemelő, hosszanti hegesztő, hajtogató, fenékhegesztő, címkéző. A gép kifogástalan állapotban van, termelés közben megtekinthető. Kevesebb kihasználtság miatt gyári támogatással és pótalkatrészekkel együtt eladó. Műszaki adatok: Nodeykz Ebspfx Aqqswh Hegesztési szélesség: 700 mm Zsák hossz (max.): 2000 mm Zsák hossz (min.): 380 mm Fólia sebessége: 120 m/perc Meghajtás: Szervo Pályák száma: 2 További jellemzők: Robusztus, automata, 2 sávos tekercses szemeteszsák gyártógép Fólia vastagsága: LD/LLDPE: 0,012-0,060 mm (egy réteg) HDPE: 0,008-0,015 mm (egy réteg) Zsák szélessége: 300-700 mm Gyártási sebesség: 100-165 m/perc (az anyag, vastagság és fóliaminőség függvényében) Kész tekercs méret: tekercsszélesség 200-300 mm; tekercs átmérője: 130 mm/max Egysoros címkéző gép: 70-200 mm x 1 sor Címke hossza: 180-350 mm Címketekercs átmérője: max. 250 mm Gyártási év: 2006. április 1. TAI-1300C Tekercsemelő lecsévélő 2. SSB-1300A Vágókés, hosszanti hegesztő 3. TA-800C1 Zsákgyártó gép, hegesztő gép 4. TAF-400-2N-M 2 sávos hajtogató 5. TAD-700 Négyorsó-csévélő Egyéb információk: Garancia: Nincs Aktuális státusz: Termelésben Elérhetőség: Azonnal Teljesítményigény: 20 kW Ár: 50 000 EUR

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Na voljo sta dve predstavitveni stroji Polymaster za folijsko industrijo. Uporabna širina: 1900mm/2100mm, teža role: 100kg, dimenzije stroja X/Y/Z: pribl. 2550mm/1050mm/2000mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nwjdoyh Nvtspfx Aqqsh

Stanje: generalkompletno obnovljen (rabljeno), Stroj za vrečke, prenovljen, delovna širina 680 mm. Nwodpoxf Txhjfx Aqqjh

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, The item for sale is a laminate production line utilizing the cast film lamination method, where film is cast directly onto the substrate. Lamination is performed using two extruders, each fitted with adjustable slotted dies, allowing for laminate widths from 1 meter up to 1.6 meters. The machine is capable of producing film thicknesses ranging from 60 to 200 microns. This setup is ideal for joining various substrates and manufacturing technical laminates according to individual requirements. The line is also equipped with a material accumulator and a sealing unit, enabling continuous feeding of material without line stoppage. Please note that components marked in red in the photos are not included in the offer. Additionally, the machine can produce technical bubble wrap. Commissioning at the buyer’s location can be arranged for an additional charge if required. The line is fully operational and recommended for a variety of laminate applications. Nwedpfx Aqsvkv Hcoqeh

Stanje: rabljeno, Film Unwinding Automation, Film Unwinder WIDMANN Pay-off and take-up reel, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guiding system Unwinding automation with deflection rollers for constant web tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection roller diameter Ø 80 mm Nwjdpfx Aeu H R Iqsqqeh Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Clamping shaft for cardboard core with inner diameter Ø 76 mm (coil inner diameter) Max. roll outside diameter - coil outside diameter 600 mm Max. disturbance circle during rotation of the film roll Ø 800 mm Reel shaft rotational speed approx. 70 rpm Motor power - drive for film roll 0.37 kW Motor power - drive for flat film into vacuum chamber 0.25 kW Power supply 400 Volt, 50 Hz - Constant web tension, winding tension maintained by film accumulator with deflection rollers and vacuum chamber - Spindle with clamping chuck suitable for jumbo rolls with cardboard core, inner diameter 76 mm - 8 deflection rollers for film accumulator ensuring consistent winding tension, mounted in precision linear guides - LENZE geared motor with brake as drive for the film roll (0.37 kW) - LENZE geared motor with brake as drive for flat film into vacuum chamber (0.25 kW) Space requirements L x W x H 1900 x 1300 x 1900 mm Net weight 580 kg In good condition

Stanje: rabljeno, Automatic Film Unwinder, Film Unwinding Machine WIDMANN Pay-off & Take-up Reel, Unwinder, Rewinder, Winding Machine, Roll Winding Machine, Roll Unwinding Machine Unwinder with Deflection Rollers and Film Guide System Automatic Unwinder with Deflection Rollers for Constant Web Tension Year of Manufacture: approx. 2000 Roll Width - Coil Width: max. 400 mm Material Width: max. 400 mm Deflection Roller Diameter: Ø 80 mm Deflection Roller Width: 430 mm Roll Weight - Coil Weight: max. 150 kg Expanding Shaft for Cardboard Core with Inner Diameter Ø 76 mm (Coil Inner Diameter) Roll Outer Diameter - Coil Outer Diameter: max. 600 mm Interference Circle during Rotation of Film Roll: max. Ø 800 mm Nwodoud U Sfopfx Aqqsh Reel Spindle Speed: approx. 70 rpm Motor Power - Film Roll Drive: 0.37 kW Power Supply: 400 Volt, 50 Hz - Constant web tension, winding force via film accumulator with deflection rollers and vacuum chute - Support shaft with expanding chuck for large rolls with cardboard core, inner Ø 76 mm - 8 deflection rollers for film accumulator ensuring consistent winding tension, mounted on precise linear guides - LENZE geared motor with brake for film roll drive (0.37 kW) - Electrical system not operational, see photos Space Requirements (L x W x H): approx. 1000 x 1000 x 1900 mm Net weight: 360 kg Good condition

Leto izdelave: 2020, stanje: novo, A fully automated film rewinding machine according to GMP guidelines. Njdsfwfpbjpfx Aqqswh Film Rewinding Machine Type FUM-900 CP This film rewinding machine is designed to rewind film rolls that have become misaligned or wound with incorrect tension during large-scale production, thereby preparing them for further processing. It was specifically engineered in accordance with pharmaceutical standards and for the handling of PVC film. Advantage of our machine: thanks to two separate drives, we can guarantee winding in both left and right directions. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: Product-contacting: 1.4301 / acrylic Output: up to 120 m/s Speed: infinitely adjustable Film roll Ø: max. 450 mm Connection: 230 V / 50 Hz Drive: DC 0.25 kW