S2 Plast Srl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 74.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 75 mm, delovna prostornina: 1.237 cm³, tlak vbrizgavanja: 1.635 letvica, Zapiralna enota: Zapiralna sila: 3000 kN Največja sila odpiranja orodja: 169 kN Pogon pomične plošče (odpiranje): 86 kN Pogon pomične plošče (zapiranje): 68 kN Pritrdilna plošča (v x š): 995 x 1050 mm Svetla odprtina (v x š): 630 x 630 mm Hod odpiranja orodja: 820 mm Minimalna višina vgradnje orodja: 330 mm Skupna odprtina: 1150 mm Hod izmetalca: 200 mm Izmetalna sila naprej/nazaj: 58/28 kN Vbrizgalna enota: Premer polža: 75 mm Ls/D razmerje: 18,7 Vbrizgalni pritisk: 1635 bar Volumen hoda: 1237 ccm Teža izstrelka (PS): 1126 g Pretok vbrizga: 442 ccm/s Hitrost vrtenja polža: 220 1/min Pretok plastifikacije: 87 g/s Sila nastavitve šobe: 82 kN Elektrohidravlična oprema: Iiodpfezfarhjx Abxoc Nazivna moč črpalnega motorja: 55 kW Vgrajena grelna moč: 29 kW Ogrevalne cone cilindričnega grelnika: 6 Oljna polnitev: 720 l Mere in teža: Potrebni prostor pribl.: 6,50 x 2,20 x 2,40 m Skupna teža: 14.500 kg Največja dovoljena masa orodja: 3430 kg Dodatna oprema: - Nihajni elementi - 8-polna vodna baterija - Robota Krauss Maffei LR 100: X: 550 mm, servo Y: 1200 mm, servo Z: 2000 mm, servo C: 0-90°, pnevmatski Dodatne enote: - 1 x hidravlični vlečni zatič - 1 x zračni ventil - Tlačni akumulator - 6 x regulacijskih mest vročega kanala - Robotski vmesnik po Euromap 67

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 62.490 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 160 kN, premer vijaka: 45 mm, injekcijska masa: 330 g, Negri Bossi 160T v zelo dobrem stanju, s popolno servisno zgodovino Negri Bossi. Razdalja med veznimi stebri 510x450 mm. Vmesnik za robota in dve hidravlični jedri. Iiodpszd U Dijfx Abxsc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 31.732 h, vpenjalna sila: 2.300 kN, premer vijaka: 55 mm, skupna višina: 2.160 mm, skupna masa: 12.000 kg, največja dolžina izdelka: 5.871 mm, Ta stroj HAITIAN ZE2300 je bil proizveden leta 2019. Ima zapiralno silo 2300 kN, hod odpiranja plošč 1150 mm in premer polža 55 mm. Opremljen je z robotom in vmesnikom Euromap 67, je v odličnem stanju in je še vedno v uporabi. Če iščete visokokakovosten stroj za brizganje plastike, razmislite o stroju HAITIAN ZE2300, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Hod odpiranja vodil: 1150 mm • Minimalna višina orodja: 220 mm • Maksimalna višina orodja: 600 mm • Razmak med stebri: 620 × 620 mm • Dimenzije montažne plošče: 920 × 920 mm • Premer centrirnega obroča: 160 mm • Največji volumen vbrizga: 570 cm³ • Radij injekcijske šobe (konica): R10 • Moč motorja: 47 kW • Moč grelca: 25 W • Število električnih priključnih zatičev: 32 Iijdpfozd T S Sox Abxoc • Vmesnik za robota: Euromap 67 • Delovne ure: 31.732 h • Stanje: odlično • Stanje: v proizvodnji Dodatna oprema • Robot (vgrajen)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 72.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.200 kN, premer vijaka: 100 mm, delovna prostornina: 2.827 cm³, Zapiralna enota: Zapiralna sila 4200 kN Maks. sila odpiranja orodja 250 kN Pogonska sila gibljive plošče - odpiranje 124 kN Pogonska sila gibljive plošče - zapiranje 102 kN Vpenjalna plošča (š x v) 1270 x 1200 mm Svetla odprtina (š x v) 800 x 800 mm Odpiralna pot orodja 1020 mm Minimalna vgradna višina orodja 380 mm Maksimalna odprtina: 1400 mm Izmetalna pot 250 mm Izmetalna sila naprej/nazaj 95 kN Brizgalna enota: Premer polža 100 mm Razmerje Ls/D 18 Brizgalni tlak 1490 bar Volumen giba 2827 ccm Teža brizga (PS) 2573 g Hitrost vbrizga 746 ccm/s Hitrost vrtenja polža 195 1/min Količina plastificiranja 165 g/s Sila na šobo 129 kN Elektrohidravlična oprema: Nazivna moč črpalnega motorja 90 kW Vgrajena grelna moč 44 kW Število regulacijskih con cilindričnega grelca 7 Polnjenje z oljem 1075 ltr. Mere in teža: Prostorska zahteva pribl. 7,50 x 2,60 x 2,50 m Skupna teža 23500 kg Iijdezd Smbopfx Abxec Maks. teža orodja 6700 kg Dodatna oprema: - Elastični elementi - 8-polna vodna baterija - Krauss Maffei robot LR 150 X: 900 mm, servo Y: 900/900 mm, servo Z: 2500 mm, servo C: 0-90°, pnevmatsko Dodatne naprave: - 1 x zračni ventil na BWAP - 1 x jedrna vleka na BWAP - Tlačni zalogovnik - Robotski vmesnik po Euromap 67 - 6 x vroče-kanalnih regulacijskih mest

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 99.000 h, številka stroja/vozila: 154855, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, Stroj prihaja iz čistega prostora medicinske tehnologije in je tako vizualno kot tehnično v odličnem stanju. Zaradi predpisanih rednih vzdrževalnih del je bil vedno skrbno vzdrževan. Iisdpfx Abjzdyk Isxjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljeni brizgalni stroj z robotom, stroj prihaja iz čiste sobe Proizvajalec: ENGEL Tip: VICTORY 330/140 TECH Leto izdelave: 2011 Zapiralna sila: 140 ton Razmik med stebri: brez stebrov Premer polža: 35 mm Maks. hod prostornina: 154 ccm³ Iedpfxjzdk I Rj Abxjic Teža brizganega izdelka: 139 g/PS Krmiljenje: CC200 Oprema: - Robot, proizvajalec: Engel, tip: V12 - 2 x izmet jedra - Ventil za izpih - 16 regulacijskih con vročega kanala - Zaščitna ograja - Transportni trak

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80400008, vpenjalna sila: 2.800 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, hod izmetalca: 200 mm, odmični hod: 675 mm, Nakladanje stroja je mogoče za doplačilo 500 €! TEHNIČNI PODATKI Zapiralna sila: 2.800 kN Število komponent: 1 Širina vpenjalne plošče: 950 mm Višina vpenjalne plošče: 950 mm Prosta razdalja med stebri, vodoravno: 630 mm Prosta razdalja med stebri, navpično: 630 mm Iiedpfxozdiyxo Abxsc Premer centrirnega obroča: 160 mm Vgradna višina min.: 330 mm Vgradna višina max.: 710 mm Maks. hod odpiranja: 675 mm Maks. hod izmetalnika: 200 mm Maks. teža orodja: 3.700 kg Maks. teža orodja na premični strani: 2.500 kg PODROBNOSTI STROJA Navoj: M20 Premer polža: EE1: 45 mm Maksimalna brizgalna teža PS: EE1: 320 g Razpored agregata: EE1: vodoravno OPREMA 2x vlečenje jedra 6x kaskadno Robot Opomba: Delovne ure so razvidne iz zadnje slike.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Letnik izdelave: 2015 Obratovalne ure: 25.109 ur Polž: 35 mm Tlak vbrizga: 2400 bar Volumen vbrizga: 192 cm³ Iisdpfx Ajzdf S Ejbxsc Zapiralna sila: 120 t Razmak med stebri: 740 x 680 mm Min. vgradna višina orodja: 300 mm Maks. razmik plošč: 800 mm Mere: 5100 x 1500 x 2350 mm Teža: 7000 kg Priključek: 22 kW Avtomatska vrata, enojni izvlek jedra, zračni ventil, ogrevanje orodja, nova cena 122.000,- € itd... Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 1500 T 2000-400 Vrtljiva miza (29.844 h) (S&P 3792) Leto izdelave: 2015 Obratovalne ure: 29.844 ur Iodpfszdf Sxjx Abxjic Polž: 40 mm Tlak vbrizgavanja: 2000 bar Volumen giba: 201 cm³ Zapiralna sila: 200 t Razmak med stebri: 1500 mm Min. višina orodja: 400 mm Maks. razmik plošč: 700 mm Dimenzije: 4700 x 2100 x 2600 mm Teža: 11.500 kg Priključek: 22 kW Premer mize: 1500 mm, vrtljiva miza z 2 postajama (180°), dvojen izvlek jedra, izpiha naprava, vmesnik za barvni dozirnik, ogrevanje orodja, nova cena cca 250.000 € itd. Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Letnik: 2015 Obratovalne ure: 25.008 ur Polž: 25 mm Tlak brizganja: 2500 bar Volumen hoda: 59 cm³ Iiodpfx Ajzdf Srjbxsc Zapiralna sila: 150 t Razmik med stebri: 520 x 520 mm Minimalna vgradna višina orodja: 250 mm Največja razdalja med ploščami: 950 mm Dimenzije: 4800 x 1700 x 2400 mm Teža: 6000 kg Priključna moč: 29 kW HHG vmesnik EM67, hidravlični akumulator, zračni ventil itd... Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Isdpfszc N U Ijx Abxoic Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2,000 bar Dosage Volume: 664 ccm Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1,510 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Iedpfxszc N Unj Abxoic Controller with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter Highly precise rotary table, driven by servo motor and controlled by inverter Rotary table diameter: 1,500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor – mold pressure control Conversion of the injection unit for vertical operation is possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in a live technical test at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Iiodezc N Ubopfx Abxec Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Ijdpfx Aszc N T Robxsic Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 570C 2000-350/150 / Production Line with Side-entry Arburg Multilift Robot / 2K-Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 40 mm Shot Weight: 153 g Injection Pressure: 2120 bar Dosage Volume: 182 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA Additional Equipment: Production line with side-entry Arburg Multilift robot 2K machine / two-component Air valve x 1 Hydraulic core pull x 5 Iiodpfx Abozc N Twexsc Hot runner control Reinforced injection units – bimetallic Proportional valves on injection units – precise molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up and tested by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 2012 Iiodpfx Ajzc N Tqjbxec Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Metering volume: 154 cm³ Clamping Unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot-runner control x 12 Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) The machine features a servo motor integrated in the injection unit for dosing the plastic material Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm – 77 g/PS Integrated Arburg brand conveyor belt and sorting chute Original Weber brand rotary table, highly precise – electrically driven (inverter integrated in the machine) Rotary table and robot available at additional cost Dimensions: Weight: 8140 kg Length/width/height: 4.81 x 1.84 x 3.45 m All offered machines are commissioned by our service technicians before sale. Video of technical tests for the selected machine is available upon request, or you may participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Iisdezc N Tkjpfx Abxjc Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 520H 1500-290 e² / hibridni stroj / proizvodna linija s stranskim robotom Wittmann W818 / obratovalne ure: 21.588 h v avtomatskem načinu Leto izdelave: 05.2016 Vbrizgalna enota: Premer polža: 30 mm Vbrizgalna teža: 97 g Vbrizgalni tlak: 2500 bar Dozirni volumen: 106 ccm Zapiralna enota: Zapiralna sila: 150 t Razmak med stebri: 520x520 mm Dimenzije vpenjalnih plošč: 695x695 mm Izmetalec: električni Isdpfozc N Tdox Abxjic Zapiralni sistem: kolenčasti vzvod Krmiljenje: SELOGICA - zaslon na dotik Dodatna oprema: Stroj v zelo dobrem tehničnem stanju Hibridni stroj: visokohitrostni, varčen z energijo in zelo tih Obratovalne ure: 21.588 h v avtomatskem načinu Euromap 67 Vmesnik za robota 5-kratni zračni ventil Krmiljenje za vleko jedra 3-kratni zračni vleki jedra Vbrizgalna enota ojačana - bimetal Glavni motor stroja - servo motor z inverterjem - varčevanje z energijo Vbrizgalna enota poganja servo motor, ki ga krmili inverter Stroj z jeklenko / baterijo stisnjenega dušika (dodatno za hitro delovanje) Centralno mazanje Samodejna nastavitev višine orodja Paralelna gibanja Robot Wittmann W818 Leto izdelave: 2016 4-osni robot: 3 osi poganjajo servo motorji (električni): X, Y, Z; os C - pnevmatska Hodi v oseh: X-420, Y-1000, Z-1500 Krmilna enota na dotik Varnostni paket za robota Robot z adapterjem, transportnim trakom z električno nastavitvijo višine, zaščitnim ohišjem Nakup robota in transportnega traku za doplačilo Dimenzije: Teža: 6250 kg Dolžina/širina/višina: 4,45x1,56x2,21 m Vsi ponujeni stroji so pred prodajo zagnani in testirani s strani naših serviserjev. Možen je ogled videoposnetka tehničnega preizkusa izbrane naprave ali sodelovanje pri tehničnih preizkusih v živo v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 cc Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter - energy savings Injection unit driven by a servo motor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional capacity for fast operations) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure control The injection molding machine operated in a so-called “clean room” and is equipped with additional protection against contamination as well as two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatic Iijdpfx Ajzc N Syobxsc Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company premises in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Arburg 520H 1500-800 e² / Hybrid Injection Moulding Machine / Production Line with Arburg Multilift H Side Robot Year of manufacture: 2013 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 cm³ Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - bimetallic Main motor of the machine - servo motor with inverter drive - energy saving Injection unit driven by servo motor controlled by an inverter Machine equipped with cylinder / battery charged with compressed nitrogen (additional loading for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor – mold pressure control The injection moulding machine operated in a so-called “cleaning room”, equipped with additional protection against contamination and two fume absorbers Iedpfozc N Smjx Abxeic Side robot Arburg Multilift H Year of manufacture: 2013 5-axis robot: Z-axis driven by servomotor (electric); X-, Y-, and B-axis (rotation) pneumatic Safety package for robot Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt possible at extra charge Dimensions: Weight: 6680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 520H 1500-400 e² / Hybrid Injection Moulding Machine Year of manufacture: 2011 Injection Unit: Ijdpezc N R Nefx Abxoic Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosing volume: 201 cc Clamping Unit: Clamping force: 150 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: electric Clamping type: toggle lever Control: SELOGICA – touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 interface Robot interface Core pull control Hot runner controller x 8 zones Injection unit hardened – bimetallic Main motor – servo motor driven by inverter for energy savings Injection unit powered by servo motor controlled by inverter Machine equipped with a cylinder/battery with compressed nitrogen (additional reservoir for fast operation) Central lubrication Parallel movements Priamus sensor – mould pressure control Dimensions: Weight: 6010 kg Length/Width/Height: 4.67 x 1.56 x 2.21 m All machines offered are started up and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided or you are welcome to participate in live technical tests at our company premises in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520H 1500-800 e² / Hybrid machine / Production line with Arburg Multilift H side-entry robot Year of manufacture: 09.2012 Injection unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen dimensions: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA – Touchscreen Ijdpfxozc N R Ae Abxjic Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control with air valve Core pull control Hot runner control x 12 zones Hardened injection unit – bimetallic Main drive motor – servo motor with inverter – energy-saving Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast cycling) Central lubrication Automatic mold height adjustment Kistler sensor – mold cavity pressure regulation Machine operated in a "clean room", equipped with additional contamination protection and two vapor absorbers Side-entry robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z axis servo motor-driven (electric); X, Y, and B (rotation) axes pneumatically driven Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety housing Purchase of robot and conveyor belt at extra charge Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests of the chosen machine can be provided, or you can participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520H 1500-400 e² / Hybrid machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface 4x air valves on the fixed platen side 3x air valves on the moving platen side 1x hydraulic core puller on the fixed platen side Hardened injection unit – bimetallic Main motor of the machine – servo motor driven by frequency inverter – energy saving Injection unit is driven by a servo motor controlled by a frequency inverter Machine equipped with cylinder / battery with compressed nitrogen (additional boost for fast operation) Central lubrication Parallel movements Ijdpfx Abszc N Rvsxeic Automatic mold height adjustment Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core pull control Injection unit hardened - bimetallic The screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total connected load: 27.9 kW All listed machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Isdpfxszc N N Ss Abxjic Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Iiodjzc N Nlspfx Abxjc Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core pull control Injection unit hardened - bimetallic The screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total connected load: 27.9 kW All listed machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Price: On request