Fertigungsmaschinenbau Kilgenstein Wiesen GmbH

Stanje: dober (rabljeno), RICHTER - EASY MARKER - Iglasti označevalnik -Vključno z delovno mizo kot prikazano -Richter - Easy Marker iglasti označevalnik -Tehnični podatki glej priloge Pedpfx Agoxz Tlmepord -Delovna miza Garant s 3 predali + dvižnimi vrati Mere: D x Š x V 1,5x1x1,6 metra / Teža cca 200 kg Pridržujemo si pravico do napak in tipkarskih napak.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj FP1 v dobrem stanju. Možen ogled pod napetostjo. Psdsxzi I Rjpfx Agpsrd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 46.259 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11210001263, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 10.000 obr/min, Krmiljenje: Heidenhein Mill plus Vpenjalna miza: 1000 x 800 mm Stožec: HSK 100 Menjalnik orodij: 120 pozicij Prsdpoxzddtsfx Agpjd Menjava miz: 2 mizi Rezervoar za hladilno tekočino: 2000 l Stroj je v delujočem stanju, opremljen s hlajenjem vretena

Stanje: rabljeno, Universalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 RPM Glava nagibna vodoravno Vretenov motor: 2 hitrosti Motor: 1,5 kW Pedpfexyymbex Agperd Pomiki: X - Z avtomatski / Y ročni Dobavljeno brez mize, le z eno 4-čeljustno koncentrično glavo Ø 140 mm Napetost: 380 V Širina: 1200 mm Globina: 1200 mm Skupna višina: 1600 mm Teža: približno 900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Deckel FP2 Aktiv, orodjarska rezkalna naprava s 3-osnim Heidenhain TNC 111 Aktiv digitalnim prikazom. Stroj je v zelo dobrem stanju, prihaja iz državnega izobraževalnega oddelka. Fiksna miza, vreteno SK 40. Oprema: različne vpenjalne puše in nosilci rezkarjev, kontrapodpora. Zelo dobro delujoč, pripravljen za uporabo. Možna predstavitev pod napetostjo po dogovoru. Pedpfx Agsxyhmvjperd

Stanje: dober (rabljeno), DECKEL Toolroom Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment milling head arm: 100 mm Enlarged working area up to: 300 x 260 mm Spindle speeds vertical/horizontal: 40 – 2,000 rpm Gear ranges: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: Prjdoxyc Tkspfx Agpjd - For horizontal machining, the milling head is swiveled 90 degrees and retracted. - 3-axis precision digital readout by HEIDENHAIN - Stepless feed in X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-coolant spray device - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available on request! Condition: Good to very good, from training facility Available from: March 2026

Stanje: zelo dobro (rabljeno), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed: Vertical/Horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axes: 5 – 500 mm/min Feed control: stepless Rapid traverse: X/Z axes: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: ±90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data not binding! Features: • For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. • 2-axis HEIDENHAIN POSITIP VRZ 719 precision digital readout • Stepless feed in X/Z axes • The machine underwent partial overhaul by a specialized company a few years ago. Pedpfjxyc N Eex Agperd Equipment: • 2-axis digital readout HEIDENHAIN • Fixed angle table • Chip tray • Machine lamp • Machine feet Additional accessories available on request! Condition: Good to very good from training facility Available from March 2026

Stanje: rabljeno, Univerzalni rezkalni stroj DECKEL FP1 Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 obr/min Velikost mize: 600 x 210 mm Glava nagibna horizontalno Ravna delovna miza Vreteniški motor: 2 hitrosti Motor: 1,3 kW Pomiki: X - Z avtomatsko / Y ročno Napetost: 380 V Prjdsxxpp Nspfx Agped Širina: 1200 mm Globina z električno omarico: 1200 mm Višina: 1600 mm Teža: pribl. 900 kg

Stanje: dober (rabljeno), Interna številka artikla: 25094 Psdpfoxxkwnox Agpord Univerzalni rezkalni stroj Deckel FP1 + Oprema (strojni primež / delilna glava / SK40 držala / nasprotni nosilec) V rezkalni glavi je vgrajena vpenjalna puša M16 + Dodatno vpenjalna puša S20x2 Stroj je možno pregledati ob priklopu na elektriko.

Stanje: dober (rabljeno), Orodjarska rezkalna stroj - MACMON M100 iz izobraževalne ustanove - Pomiki X/Y/Z 310x340x170 mm - Območje obratov 40-2500 obr/min - Samodejni pomiki / hitri hodi Psdoxw T Srspfx Agpord - Orodni držalo ISO 40 - Vertikalna glava nagibna - Horizontalna / vertikalna rezkalna naprava - Tog kotni stroj 600x215 mm - Naprava za hlajenje - Pogonska moč 2,5 kW - Dokumentacija Mere: D x Š x V 1,5x0,7x1,7 metra Možne napake ali vnosne napake.

Stanje: dober (rabljeno), Leto izdelave: 1976, Deckel FP1 orodjarska rezkalna naprava, fiksna kotna miza, SK 40 vpenjalni konus vretena. Zavora vretena, dodatki: nasprotni nosilec, različne vpenjalne puše. Dobro delujoče stanje. Po dogovoru možno prikazati pod napetostjo. Psdpexw T Efjfx Agpord

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Odlično ohranjeni 5-osni brusilni stroj za orodja naprodaj zaradi neizkoriščenosti! Predpfx Asxw Sxksgpsd

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Precizna mehanika Weilheim Deckel (Švica) Predsxw Npyjpfx Agpod

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: popolnoma funkcionalen, potrebna širina: 1.400 mm, zahteva za prostor dolžina: 1.040 mm, potrebna višina: 1.900 mm, Oprema: dokumentacija / priročnik, Kopirni rezkalni stroj v vrhunskem stanju, možen prevzem s strani gravirja. 1 naprava za zmanjševanje in povečavo 1 vrtljiva miza s 3 lukenjskimi ploščami 1 optična tipalna naprava s fiksirnimi čeljustmi 1 pomična miza Predpfx Agjxw Nn Aoped 1 zglobna svetilka 1 podaljšek za rezkalo 1 nasadni rezkalni trn različne vpenjalne naprave in kopirne predloge 9 vpenjalnih tulec za rezkalno vreteno

Stanje: dober (rabljeno), Leto izdelave: 1985, Deckel FP1 Aktiv s 3-osnim digitalnim prikazovalnikom Heidenhain, 3 aktivne osi, togata miza, vreteno SK 40 M16. Centralno mazanje, navodila za uporabo. V dobrem delujočem stanju, prihaja iz centra za poklicno izobraževanje. Po dogovoru možno prikazati pod napetostjo. Prsdexwunzspfx Agpsd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Pjdpfx Agoxu Hbhjpord >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes Prjdpexu E R Iofx Agpod >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 300 mm, pomik po osi Z: 380 mm, Oprema: dokumentacija / priročnik, Na žalost se prodaja zaradi pomanjkanja prostora. Prihaja iz učne delavnice in je bila zelo dobro vzdrževana. Žal mi primanjkuje tudi časa za uporabo, vendar je stroj vedno pripravljen za preizkus. Na voljo so tudi dodatki, kot so 3D sondna držala, rezkarji itd. Podpfx Ajxudw Hjgpord

Stanje: dober (rabljeno), Dimenzija mize: cca 600 x 150 mm X/Y/Z pomik: cca 300 / 130 / 300 mm Vpenjanje vretena: W20 Teža: cca 600 kg Gladko gibljive osi, zelo malo zračnosti. Nagibna miza avtomatski pomik po X-osi motorna zavora Pedpfx Aexq Taiegpjrd Število obratov 100 do 2000 min⁻¹ Pozor: Podatki na tej strani so pridobljeni in sestavljeni po najboljših močeh, vendar njihova točnost ni zagotovljena. Zato to ne predstavlja ponudbe ali pogodbe, zato vam priporočamo, da vse pomembne podatke preverite. Finančne informacije DDV/marža: Marža: Prikazana cena je z DDV (DDV ni odbiten za podjetja).

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 310 mm, dolžina pomika po osi Y: 170 mm, dolžina podajanja os Z: 340 mm, potovalna razdalja osi X: 310 mm, pomik osi Y: 170 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 55 obr/min, Macmon M100 NC with Heidenhain TNC 128 Year of manufacture: 2025 The machine is new and can be inspected at any time. The Macmon M100 NC is a compact universal milling machine designed for precise machining tasks in workshops, training centres, and single-part production. Its robust cast construction and backlash-free guides ensure high accuracy and repeatability. Equipped with the Heidenhain TNC 128 control system, the machine allows both manual operation and NC-controlled machining. The cross axis (Y) is CNC-controlled, while both the longitudinal (X) and vertical (Z) axes can be operated manually or automatically. Technical specifications: Control system: Heidenhain TNC 128 Travel distances: Manual operation: X = 310 mm / Y = 170 mm / Z = 305 mm NC-controlled: X = 300 mm / Y = 165 mm / Z = 300 mm Controlled axis: Y-axis (cross axis) Prodpfjxqh Hdox Agpod Milling head: swivels 0–90° Drive: infinitely variable Operating modes: combinable manual and NC operation Equipment: coolant system, work light, machine cabinet Condition: New (year of manufacture 2025) Immediately available Can be inspected under power at any time

Stanje: delavnici obnovljeno (rabljeno), Deckel FP1 AKTIV (3-axis Aktiv) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Features: - Aktiv digital readout for 3 axes (HEIDENHAIN TNC 113) - Infinitely variable feed in X, Y, and Z axes Prodsxpwfgjpfx Agpjd - Quill traverse at vertical milling head: 60 mm - Vertical milling head is swiveling and extendable horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically tested. Upon request, videos of the geometry can be provided. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation parallelism X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital display overhauled - Set of scrapers installed - LEDs in Aktiv display replaced - Oil change - Vertical milling head re-bedded - Oil sight glass replaced Net price ex works, loaded from stock

Stanje: pripravljen za uporabo (rabljen), Fraiseuse universelle Deckel FP 2 NC TNC 320 / 321 Courses : x - 300 mm | y - 300 mm | z - 400 mm Vitesse en continu : 31,5 - 5000 tr/min Predjxfkm Aepfx Agpjd Avances : 2-4000/min Avance rapide : 4000/min Porte-outil : SK 40 Course de la broche : 80 mm Poids de la machine : 1350 kg Vous pouvez volontiers venir voir la machine sur place. Nous pouvons organiser pour vous une expédition économique ! Vous recevrez une facture conforme. Pour les clients étrangers, une facture nette peut être établie, à condition d’avoir un numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Visitez notre boutique et découvrez également nos autres offres. Les noms des sociétés et les marques mentionnés sont la propriété de leurs détenteurs respectifs et servent uniquement à l’identification et à la description des produits. Des écarts dans les données techniques ou des erreurs dans la description de l’article peuvent survenir et restent réservés.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 150 mm, dolžina podajanja os Z: 340 mm, hod vretena: 60 mm, največja hitrost vrtenja: 2.000 obr/min, skupna masa: 1.000 kg, vhodna napetost: 380 V, Oprema: dokumentacija / priročnik, Universal-Fräsmaschine DECKEL Typ FP 1 Maschinennr.: 56699/08 Baujahr: 1974 Verfahrwege: X: 300 mm Y: 150 mm Z: 340 mm Psdpfx Ajxdxkmegpord Tischgröße: 600 x 220 mm Spindelaufnahme: SK 40 Spindeldrehzahl: 40–2000 U/min, 16 Stufen Motorleistung: 1,0 und 1,4 kW, polumschaltbar Anschluss: 380 Volt, 50 Hz - Vorschub auf den Achsen X und Z - Zwei Motorgeschwindigkeiten und 8 Getriebestufen - Vertikalkopf-Spindelhub: 60 mm - Festwinkel-Tisch - Integrierte Kühlmittelanlage im Maschinenständer - Separater Schaltschrank - Digitalanzeige auf zwei Achsen X Y mit Zählwerk für 3 Achsen Aufstellmaße (L x B x H): 1200 x 1100 x 1600 mm Gewicht: ca. 1000 kg - 1 Präzisionsschraubstock - 1 Kraftschraubstock - 1 Ausdrehkopf - 1 EROWA SK 40 Schnellspannfutter mit 3-Backenfutter - 1 schwenkbarer Teilkopf - 1 Rundtisch für Teilkopf - Aufnahmen und Spannzangen - Spannwerkzeuge, Briden, Schlüssel, Fräser Sehr guter Zustand

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: Prodpjxdi Ivofx Agped >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: rabljeno, Rezkalni stroj DECKEL FP1 Prjdsxbt E Topfx Agped