HME Trading AG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB32-287, TEHNIČNI PODATKI Postaja 1: Žaganje Postaja 2: Vrtanje Postaja 3V: Sveder Postaja 3H: Vrtanje Postaja 4: CNC Postaja 5: CNC Isdpjx U Tgaofx Af Tstb Postaja 6V: Navojenje Postaja 6H: Vrtanje Postaja 7: Obrat Postaja 8: CNC prevrtavanje Postaja 9: CNC navoj Postaja 10: Sveder Postaja 11: Vrtanje Postaja 12: Brez enote Postaja 13: CNC Postaja 14: Rezkanje 45° Postaja 15: Vrtanje 45° Postaja 16: Vrtanje 45° PODROBNOSTI O STROJU Stanje: Razstavljen Datum skladiščenja: Od avgusta 2024 Priključna moč: 400 V, 40 kW OPREMA - Nalagalnik materiala - Knoll transporter za ostružke - Knoll vakuumski rotacijski filter VRF 500 - Stroj se prodaja brez črnega podesta

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K.966610 M, skupna višina: 3.056 mm, skupna dolžina: 4.825 mm, skupna širina: 3.500 mm, Ponujamo zelo dobro ohranjen avtomatski rotacijski stroj blagovne znamke Mikron Multifactor tip 60.015. Iodsx Ura Eepfx Af Tstb Stroj iz leta 1997 je zelo lepo vzdrževan in takoj pripravljen za uporabo. Obdelava struženih delov je možna na do 15 postajah (maksimalno 60 taktov na minuto). Možno je dovajanje materiala v palicah ali obročih. Če imate dodatna vprašanja ali potrebujete več informacij, nas prosim kontaktirajte!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Hydromat HB32/16 CNC, transferni stroj z 8 vpenjalnimi glavami in 8 vpenjalnimi tuležnimi držali, krmiljenje Bosch MTX, opremljen s 16 obdelovalnimi enotami, vključno s 5 CNC-50/100 stružnimi postajami in 2 CNC triosnimi rezkalnimi enotami, Stäubli členkasti robot, polnilni magazin dolžine 4,2 m, hladilni sistem KNOLL z VRF / visokotlačno in nizkotlačno črpalko. Itedpfxsxz Eave Af Tob Stroj je bil leta 2020 generalno obnovljen pri podjetju HME AG in opremljen s krmiljeno Bosch MTX.

Stanje: rabljeno, MIKRON Multistar CX-24 / 1500 je rotacijski prenosni stroj visoke natančnosti, zasnovan za vrhunsko natančnost in zanesljivost. Zmogljivost: 24 postaj; največ 23 zgornjih, 22 spodnjih, 22 stranskih postaj; premer obdelovanca do 24 mm; proizvodna zmogljivost 70 kos/min (večstopenjsko 280 kos/min). Glavni podatki: hitrost vretena 500–32.000 obr/min; priključek 50 Hz, 3x 400 V; komprimirani zrak 6 bar; masa stroja približno 3500 kg; masa krmilne omare približno 1200 kg. Dosega tesne tolerance; tipične uporabe: avtomobilska, letalska, medicinska, urarska industrija in orodjarstvo. Ijdpfxoxx U A Ue Af Totb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8450-02-001, premer vrtljive mize: 4.000 mm, Oprema: transportni trak za ostružke, TECHNICAL DETAILS Rotary indexing table diameter: 4,000 mm Processing stations: 12 Axis configuration: 4 × 3 axes, 8 × 2 axes Clamping chucks: 12 units for tool holders Drilling units: NC-controlled Accessory systems Chip conveyor: Knoll, type 500K-1/500, year of manufacture 2001 Coolant system: available Filtration system: available Measuring device: integrated MACHINE DETAILS Identification number: 8450-02-001 Customs tariff number: 84573010 Weight Machine: 6,000 kg Control cabinet: 800 kg Coolant system: 600 kg Dimensions Working height: 1,170 mm Machine height: 2,220 mm Footprint: 5,231 x 4,540 mm EQUIPMENT - Rotary indexing table with large diameter of 4,000 mm for comprehensive machining operations Iedpfx Aoxur Ruef Totb - 12 NC drilling units with 12-position clamping chuck setup - Integrated chip conveyor of type Knoll 500K-1/500 - Complete system including filtration and coolant systems - Measuring system and automatic loading/unloading for fully automated operation

Stanje: dober (rabljeno), Leto izdelave: 2010, Vrtljiva miza WEISS Tip: TC 220T letnik 2010. Iedpsxr Dh Hjfx Af Tjtb

Stanje: rabljeno, 2x Pfiffner RT 100 Description: Rotary Indexing Table / Spindles: - Clamping Stations: 12 motorized spindles - Drive: Torque drive, water cooled - Position Measuring System: Direct - Indexing Time: 1.5 seconds - Spindles: Water-cooled motor spindles - C-Axes: 0.001°, hydraulically clamped - Speed: 5,500 rpm Iedpow Si T Aofx Af Tjtb - Power: 11 kW - Clamping Device: Chuck Base Modules: - Technology: Positioning module, 3-axis - X-Axis: 50 mm - Y-Axis: 100 mm - Z-Axis: 100 mm - Measuring Systems: Direct on all axes - Coolant Supply: Integrated Max. Workpiece Size: 100 x 100 x 100 mm Station 1: - Horizontal: Raw part infeed (indexing conveyor + Stäubli robot) - Vertical: Raw part measurement Station 2: - Horizontal: 4-position turret, non-driven - Vertical: Remeasure clamping error (C-axis homing) Station 3: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 4: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 5: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: 6-position turret with WAN, 10,000 rpm Station 6: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 7: - Horizontal: Not equipped - Vertical: 6-position turret with WAN, 10,000 rpm Station 8: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: Not equipped Station 9: - Horizontal: 4-position turret, non-driven - Vertical: Not equipped Station 10: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: Not equipped Station 11: - Horizontal: 6-position turret with WAN, 10,000 rpm - Vertical: 6-position turret with WAN, 10,000 rpm Station 12: - Horizontal: Loading/unloading device with dual swing gripper + discharge conveyor Equipment / Accessories: - Chip Management: Chip conveyor - High Pressure System: 50 bar - Tool Monitoring: ARTIS breakage control - Raw Material Supply: Infeed belt with robot - Finished Parts Removal: Discharge belt with 3-way diverter - Oil Mist Separator: Electrostatic filter - Fire Extinguishing System: Kraft und Bauer - Part Marking: Laser - Part Cleaning: HESO cleaning system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je specialno predelana krožna avtomatska strojna celica za obdelavo aluminija, ki jo je preuredilo podjetje Stöferle. 1) Celoten stroj, priključna moč: 120kW, hidravlični tlak: 50bar, pnevmatski tlak: 6bar, transportna širina: pribl. 2600mm, postaj: 8, dimenzije stroja X/Y/Z: pribl. 3000mm/2600mm/2800mm, teža: pribl. 9500kg. 2) KSS naprava Knoll s strgalnim transporterjem, letnik: 2010. 3) Hidravlično agregat Hydropa. 4) Pnevmatski sistem Festo. 5) Centralni mazalni sistem ALS. Na voljo je dokumentacija. Ogled na lokaciji je možen. Itodpfx Ajw Rqw Tjf Tsb

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Itjdpow H Rh Sefx Af Tsb Feed of drilling units: mechanical feed via quill Drilling heads: multi-spindle drilling units Rotary indexing table: mechanically indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic via centric expanding mandrel, workpiece Ø approx. 80 mm Dimensions of machine (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • Machine designed for large batch production • Stable cast iron machine table with side chip removal and separate coolant tank • automatic safety guard door • 5-station rotary indexing table • heavy-duty cast iron machine table, ideal for custom rebuilding or retrofitting • machine suitable for refurbishment / rebuild

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production Itodpfxew H I R Rs Af Tob • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: pripravljen za uporabo (rabljen), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing performance: 20 cycles/min, spindle stroke: 100 mm, drilling capacity steel/brass: 20 mm/30 mm, thread cutting capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Itodpfx Aow Hglmof Tjb

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Itjdpfx Asw E Hpvof Teb Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Iodsw Emx Rspfx Af Tjtb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Iedpfx Aewy I Tlef Tjtb Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: nepreverjeno, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Itjdpfxjwyn S Uj Af Teb Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical threading unit Feed of drilling units: mechanical feed via quill Drill heads: single spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine has a robust machine table with chip disposal to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary tools • The machine is equipped with a 6-station rotary indexing table

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Year of manufacture: approx. 1999; Control: Siemens S5 / Siemens HME; Stations: 12; Processes: sawing / feed / indexing; Operating hours: approx. 85,383. Includes loader, control cabinet, chip conveyor, coolant system, and a total of approx. 35 machining units. Documentation is available. An on-site inspection is possible. The machines are dismantled and stored, but you can view similar machines in operation. One machine is incomplete and suitable as a source of spare parts. Iedpfx Aowv Um Djf Tetb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, 3 Rotary Transfer Lines + 3 Linking Robots OVERVIEW - Bar feeder - Rotary transfer line 1 (sawing + machining operation 1) - Rotary transfer line 2 (machining operation 2) - Placement onto conveyor belt - Marking Itjdpfxjwqf R Nj Af Tsb - Deburring station - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the sawing clamp and transfers it to the clamping device of rotary transfer line 1 (station 1) Rotary transfer line 1 (Machining Operation 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2×), drilling Ø 6.5 mm (4×) Station 5: Drilling Ø 5 mm (4×), threading M6 (2×), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2×) Station 6: Transfer to second line Rotary transfer line 2 (Machining Operation 2) Station 1: Robot takes part from station 6 of line 1 and places it in the clamping fixture of the second rotary transfer line Station 2: Contour milling bottom Station 3: Slot milling (2×) Station 4: Contour milling bottom (2×) Station 1 (again): Discharge onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Loading height: approx. 1200 mm Parts buffer: 10 bars Rotary Transfer Line 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feed axes: 14+1+5 NC axes Rotary Transfer Line 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feed axes: 9+1+3 NC axes Discharge Conveyor Chain conveyor: workpiece carriers made of plastic Inclination: approx. 3° Length: 8,000 mm Part detection: at loading station / marking station / unloading station Rotary Transfer Line 3 - SEMA REA 30/5-6S-NC-R Number of deburring positions: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Deburring cell extension: Blowing off workpieces Robot: for loading and unloading the deburring station, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB32-571, Oprema: dokumentacija / priročnik, transportni trak za ostružke, TECHNICAL DETAILS Number of CNC units: 8 Control: Siemens Chip conveyor: Knoll Filtration system: Vacuum rotary filter High-pressure system: Combiloop Bar loader: 3 m UNIT ALLOCATION PLAN Station 1: Sawing Station 2: Hydraulic drilling Station 3 H: CNC turning Station 3 V: Hydraulic drilling Station 4: CNC turning Station 5: CNC turning Station 6 H: Hydraulic drilling Station 6 V: CNC turning Station 7: No unit Station 8: CNC turning Station 9: CNC turning Station 10: Hydraulic drilling Station 11: Hydraulic drilling Station 12: CNC turning Station 13: CNC turning Station 14: Milling Station 15: Hydraulic drilling Station 16: Hydraulic drilling EQUIPMENT - Platform - Declaration of conformity Itsdpfx Aowkd A Dof Tjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, EUBAMA S6, year 2010. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Itodpfxov Ef N Ao Af Tob Maximum output (cycles/min): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Number of machining units: 15 PRA 52 P IEMCA bar feeder Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant tank The machine is in working condition.

Stanje: generalkompletno obnovljen (rabljeno), Used, tested. 6-month warranty. 5 units available. Price per unit. Length: 296 cm Width: 74 cm Height to top edge of blue bracket: 166 cm Itjdpfxsvvac Es Af Tjb Height of conveyor belt: 48 cm Intra-community delivery within the EU possible with 0% VAT. Please provide your VAT ID if interested. Price excludes 20% VAT.

Stanje: rabljeno, Description: General: Year of manufacture: 2018 Control: Fanuc Machining stations: 5 units Loading station: 1 unit Travelling range: X-axis: 450 mm Y-axis: 500 mm Z-axis: 450 mm Rapid traverse X/Y/Z: 50 m/min Turret: Number of stations: 8 Speed: 13,300 rpm Itedpfx Afjvr Az No Tsb Torque: 58 Nm Tool holder: HSK 63 C Workpiece/Fixture: Maximum dimensions: 350 x 350 x 350 mm Maximum permissible weight: 250 kg Media connections: 6 units NC rotary tilt table: A-axis: +/- 150° B-axis: 360° Maximum load: 250 kg Table diameter: 320 mm Equipment / Accessories: Loading/Unloading: Fanuc Robot M20i-A Chip disposal: 2x chip conveyors Coolant supply: High-pressure coolant system, 20 bar Linear measuring systems: Direct on all axes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Stations: 6, Power: 40 kW, Control system: Siemens. Includes upstream Fischer separating head, Festo feed unit, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip processing system with ejection and hydraulic unit. Documentation available. On-site inspection possible. Itjdpfxju T Rhbs Af Teb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, A rotary transfer machine for the production of ball sockets is available. Processing stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing, and separate Knoll chip disposal. In 2015, the machine was upgraded with SW milling. Documentation available. On-site inspection is possible. Iedpou T Rg Rjfx Af Tstb

Stanje: rabljeno, Technical Details: Spindle mount: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15–20 sec Speed: drilling 225–1037 rpm Speed: threading 50–316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Machine weight approx.: 9.0 t Space requirement approx.: 3.9 x 2.4 x 2.5 m Machine dimensions: L: 3.9 x W: 2.2 x H: 2.7 m Dimensions L x W x H: + system 2.7 x 2.52 x 2.25 m Itedpfxeu Idyce Af Teb Transfer Machine The machine can be offered fully overhauled. (Photos show original condition!) The machine is designed for machining workpieces in a single clamping operation. Primarily, Ms blanks with Ø 90 mm x approx. 100 mm length were machined on it. Description: - Workpiece carrier indexing table with clamping stations, round table type with horizontal axis, equipped with 5 workpiece stations. Machining units: - Drilling spindle and thread-cutting units - Drilling capacity up to 2 3/4" and 81.53 mm in Ms - Thread cutting up to 2 1/2" and metric threads The machine is equipped with a feeding and unloading unit for workpieces. (Feeding rate 3–4 pcs/min and cycle time 15–20 sec.) Also includes coolant system in original condition.

Stanje: rabljeno, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Machine weight approx.: 17.0 t Space requirements approx. (LxWxH): 5.0 x 6.2 x 3.8 m Machine dimensions (LxWxH): 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 work stations and 15 drilling/milling spindles For example, for the production of fittings in larger quantities Further technical specifications: Ijdeu Idxrjpfx Af Tstb - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm - Left: 4x drilling and milling spindles with 18 speeds and 1x hydraulic thread cutting spindle, 14 – 224 rpm; radial 3x drilling and milling spindles, including 1x U-axis and 1x thread cutting spindle - 1st thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left rotation - 2nd thread cutting unit: SK 40 holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Control panel - Hand-held selector switch in process.