Rainer Dulat

Stanje: zelo dobro (rabljeno), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity 100 Liters Compressor has been replaced!! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This device is ideally suited for material testing, climate testing, as well as temperature and humidity simulation in industrial settings, laboratories, or R&D departments. The test chamber enables precise testing conditions ranging from extreme temperatures to high humidity levels. Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in workspace center: ± 0.3 to ± 1 K Spatial temperature uniformity (reference to set value in range tmin to +150°C): ± 0.5 to ± 2 K Temperature change rate Heating: 3.5 K/min Cooling: 3.5 K/min Heat compensation: max. 700 W Specifications for climate testing: Humidification system data: Tank capacity: approx. 13 l Water quality: demineralized pH value: 6 – 7 Conductivity: max. 20 μS/cm Water consumption at constant temperature +40°C, 92% RH: 2 l / 24 h Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature fluctuation in workspace center: ± 0.3 to ± 0.5 K Spatial temperature uniformity (to set value): ± 0.5 to ± 1.5 K Temporal humidity deviation in workspace center: = 1 to ± 3 % RH Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical loading data: Maximum load of chamber floor: 10 kg Per shelf: 10 kg Total shelf loading capacity: 50 kg Operational data: Chamber illumination: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230V ±10% 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Fuse (external): 16A slow Protection category: Ljdpfx Ajyw Nnfsb Tsri Control cabinet IP 22 and control panel IP 54 Heat dissipation for air-cooled test chambers: Max. heat output to environment: 2,500 W Noise measurement: Sound pressure level (free-field measurement at 2 m from front and 1.0 m height): approx. 59 dB(A) Port: Feed-through: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R23 Chamber volume: approx. 100 liters Weight: 210 kg Important information for you as a buyer for your safety! The following steps are performed in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2014, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13RO210, Nudimo ta rabljen prenosni spektrometer Oxford Instruments PMI-MASTER Pro, letnik 2014. Letnik modela: 2014 Vhodna napetost: 24 V DC Moč: 500 VA Lredpfsywwr Sex Ab Tsi Spektrometer smo kupili kot nov, vedno serviran pri Oxford Instruments Analytical GmbH in je v dobrem, delujočem stanju. Zadnji servis: 09/2024. Naprava je bila v uporabi do 09/2025. V primeru vprašanj ali dodatnih informacij nam pišite ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Emcotest Emco-Test N3 N3D naprava za merjenje trdote Dolžina hoda preizkusa: ca. 285 mm Izpon: ca. 170 mm Maksimalna teža vzorca: ca. 20 kg Teža stroja: ca. 35 kg Vabimo vas na ogled naprave. Za vas lahko uredimo ugoden prevoz! Ob nakupu prejmete ustrezen račun. Lrjdsywuqxspfx Ab Tsi Za tuje stranke je možno izdati neto račun. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge naše ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih imetnikov in služijo le za identifikacijo in opis izdelkov. Možna so odstopanja tehničnih podatkov in napake v opisu artikla, zato si pridržujemo pravico do sprememb.

Stanje: zelo dobro (rabljeno), Vötsch Vötsch Climate Test Chamber VT 4004 Tabletop Test Cabinet -40°C to +180°C For sale is a high-quality climate test chamber / tabletop test cabinet from the renowned manufacturer Vötsch Industrietechnik (model VT 4004). This device is ideal for use in laboratories, R&D, or industrial applications, and is perfectly suited for simulating temperature conditions when testing electronics, components, and materials. Features & Applications: - Temperature testing range: -40°C to +180°C - Uniform temperature distribution via recirculating air system - Combination of cooling and heating - Digital control with display - Compact tabletop construction (approx. 35 litres interior volume) - RS232 interface for connection to PC or measuring systems Technical Data: Manufacturer: Vötsch Industrietechnik Type: VT 4004 Volume: approx. 35 litres Cooling: air-cooled Refrigerant: R404A Electrical Data: Voltage: 1/N/PE AC 230V ±10% / 50 Hz Rated power: approx. 1.5 kW Rated current: approx. 7.5 A Dimensions: External: Width: 95 cm / Height: 63 cm / Depth: 83 cm Internal: Width: 32 cm / Height: 40 cm / Depth: 27 cm Ljdpfx Aboywg Amj Tori Condition: Used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Stanje: pripravljen za uporabo (rabljen), Binder ED 240 / E2 sušilna omara, inkubator, grelna omara, valilna omara št. 1147 Nazivna temperatura: 300°C Notranje mere: 800 mm × 500 mm × 600 mm (Š × G × V) Zunanje mere: 1040 mm × 800 mm × 820 mm (Š × G × V) Teža: cca 85 kg Lrsdpfx Abeyvun Io Tei Moč: 2,70 kW Vabljeni k ogledu naprave. Na željo lahko organiziramo ugoden prevoz. Ob nakupu prejmete ustrezen račun. Za tuje kupce lahko izdamo neto račun – pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo spletno trgovino in si oglejte tudi ostalo ponudbo. Navedenih blagovnih znamk in imen lastnikov uporabljamo zgolj za identifikacijo in opis izdelkov. Možna so odstopanja v tehničnih podatkih ali napake v opisu – pridržujemo si pravico do sprememb.

Stanje: zelo dobro (rabljeno), Despatch LCC2-14NV-3 Leto izdelave: cca. 2018 Maks. temperatura: 260 °C / 500 °F Napajanje: 415V - 1 faza - 50 Hz Polni tok obremenitve: 25,2 A S.C.C.R: 5 kA Grelec: 16 kW 22,3 A Največji motor: 2,1 A Lsdpfsyvlauox Ab Tori Skupni tok motorjev: 3,2 A

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Na voljo je Köhlerjeva solna pršilna komora za preizkušanje korozije materialov in sestavnih delov. Prostornina preizkusne komore: 1000l, temperaturna konstantnost: +/-1K, vodni tlačni razpon: 2,5bar-5bar, notranje mere X/Y/Z: 1250mm/950mm/760mm, mere stroja X/Y/Z: pribl. 2100mm/1400mm, teža: pribl. 350kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Lredpfx Aboyu T Dke Tei

Leto izdelave: 2013, stanje: rabljeno, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Useful volume: nominal 1200 liters Interior dimensions: 1310 x 675 x 1410 mm (W/D/H) External dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 by Weiss Technik is a highly flexible plant growth chamber, specifically designed for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable space while requiring minimal footprint. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touchscreen panel. Humidity: Optional humidification up to 80% r.h. (relative humidity) available. Dehumidification: For seed storage, the system can lower the humidity to as little as 15% r.h. at 4°C. Useful volume: The chamber has a nominal volume of approx. 1200 liters. Maximum growth height: Without intermediate shelves, the maximum growth height is up to 1275 mm (dependent on specific LED or lamp configuration). Ledpjyu Svlofx Ab Tori Footprint: Thanks to its shallow depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Used item as shown in the pictures. If you have any questions, please contact us.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation: 4500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1280 mm x Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Side access ports: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg For your safety as a buyer, please note the following information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) Lodpfxsyu Rhgo Ab Tjri If you have further questions, we will gladly answer them by phone.

Leto izdelave: 2011, stanje: dober (rabljeno), Steklena plošča 6 kamer z osvetlitvijo Dva lijaka + en pogon Integrirani zalogovnik 25 l / 50 kg z regulacijsko napravo Skako bunker 125 Polnilnik za 10 zabojev Lrodpfoyu Ivnex Ab Toi Dodatni objektiv TC1224 + nosilec Dodatni objektiv TC23056 + nosilec brez UPS

Leto izdelave: 1999, stanje: rabljeno, Ponujamo ta rabljeni Vötsch VT 7100, letnik 1999. Številka naprave: 59566005700010 Leto izdelave: 1999 Hladilno sredstvo: R 404A Lsdpfx Abeyu Hwqj Tsri Količina hladilnega sredstva: 4,2 kg Dovoljen obratovalni nadtlak: 25 bar Mirni tlak: 70 bar Napetost: 3/N/PE AC 400 V ±10 % 50 Hz Nazivna moč: 11,5 kW Nazivni tok: 22,0 A Št. električne sheme: EPL 66912 Št. sistemske sheme: RPL 67612041W Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Na voljo je modularni kompaktni viskozimeter Anton Paar za rotacijske in oscilacijske meritve. Merilna plošča: PP25, premer merilne plošče: 25 mm, maksimalni navor: 125 mNm, minimalni navor: 0,4 µNm, ločljivost navora: 100 nNm, maksimalno število vrtljajev: 1500 vrt/min, temperatura vzorca min./maks.: -20°C/220°C, temperaturna enota: P-PTD 220, maksimalni tlak merilne celice: 150 bar. Dimenzije stroja (X/Y/Z): pribl. 400 mm/700 mm/550 mm, teža: pribl. 35 kg, krmiljenje: RheoCompass Light. Dokumentacija je na voljo. Možen je ogled na lokaciji. Ledpoyuyvmsfx Ab Tsri

Stanje: rabljeno, Hegewald und Peschke Hegewald & Peschke Universal Testing Machine inspeKt 5 “table blue” + Long-Travel Extensometer MFX 200 For sale is a universal testing machine from Hegewald & Peschke (Germany) equipped with an integrated long-travel extensometer, type MFX 200. The system comes from a laboratory setting and was used for tensile testing and materials testing. ⚠️ Important Notice: The control and regulation electronics (blue control box) are not included. Therefore, the system is being sold as a source of spare parts, for project use, or for retrofit purposes. The manufacturer has confirmed that retrofitting with a new control unit is generally possible, although it may be costly. Ideal for: - Universities - Testing laboratories - Mechanical engineering - Spare parts sourcing - Retrofit projects Description / Function The Hegewald & Peschke inspeKt series is a high-quality universal materials testing machine for performing mechanical property tests. Typical tests include: - Tensile tests - Compression tests - Material elongation Lsdpfx Absyux S Tj Teri - Elongation at break - Determining modulus of elasticity (E-modulus) - Stress-strain analysis The integrated long-travel extensometer MFX 200 provides precise measurement of specimen length change during tensile testing, enabling exact determination of material properties. Machines in this series are used in: - Materials research - Quality control - Plastics and metals testing - Universities and testing institutes Technical Data: Manufacturer: Hegewald & Peschke Meß- und Prüftechnik GmbH Machine: inspeKt 5 - table blue Extensometer: MFX 200 long-travel extensometer Year of construction: 2011 Article no.: 15-100-031 Serial no.: 15031101 Power supply: 230 V / 50–60 Hz Extensometer Manufacturer: MF Mess- & Feinwerktechnik Velbert Machine type: Universal materials testing machine Dimensions and weight (approx.): - Height: approx. 150–170 cm - Width: approx. 60 cm - Depth: approx. 60 cm - Weight: approx. 120–180 kg Important Note: “The table shown in the photos is not included in the sale.” Condition - Visually in very good laboratory condition - Complete mechanical assembly present - Control unit / electronics missing - Sale expressly as a spare parts or retrofit unit - Delivery as shown in the images. (Technical data subject to change and error!) Further questions can be answered by phone.

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixing Systems 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-assisted measurement data acquisition Precise edge detection in transmitted and reflected light using intelligent image processing algorithms Compact and ergonomic – delivers high performance Fast handling with maximum measuring accuracy Special features Includes Renishaw TP 200 touch probe system LED surface illumination, switchable Lrjdpfx Abjyuut Ts Tji Diode laser as positioning aid With a measuring range of 300 mm × 200 mm × 200 mm, it is especially suitable for stamped, plastic, rubber, and milled parts as well as tools, profiles, and circuit boards. Highlights of the measuring microscope include camera-assisted data acquisition, fast operation, and high precision. Notably, it offers highly accurate edge detection in both transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and easy to handle, with dimensions of 900 mm × 950 mm × 950 mm.

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Binder FP 400 Laboratory Dryer Year of manufacture: 2023. Like new, unused. 2 years warranty on spare parts BINDER FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features extremely precise temperature control and uniform temperature distribution throughout the interior. Thus, the unit forms an ideal basis for repeatable material tests, stability studies, cultivation, or development processes. Compared to similar test or climate chambers, it stands out for its high performance, energy efficiency, and user-friendly design, which greatly simplifies daily laboratory processes. Technical features and advantages for laboratory use: The advanced FP 400 technology meets the highest standards for safety, energy efficiency, and ease of use. This material test chamber enables precise control of temperature conditions across a wide range of test and development processes – from microbiological cultures and chemical reaction studies to stability tests for sensitive samples. Key technical data at a glance: Temperature range: approx. 5°C above ambient up to max. 300°C Lodpfx Aboyt A Ene Tjri Internal capacity: 400 liters; maximum load: 90 kg total (up to 35 kg per shelf) Temperature deviation over time: ±0.3 K; spatial temperature deviation: 1 K at 70°C, 2.5 K at 150°C, 4.8 K at 300°C External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) Power supply: 400 V, 3 N~, 3.4 kW, 50/60 Hz Energy consumption: 520 W (70°C), 1200 W (150°C), 2340 W (300°C) Protection class: IP 20 acc. to EN 60529, certified to DIN 12880 Additional features: - Interior made of high-quality stainless steel — ensures maximum durability and easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low noise level - Environmentally friendly and energy-efficient operation thanks to low energy consumption and modern insulation concept - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Double inner glass doors allow quick visual checks without affecting temperature levels - Optimized airflow ensures optimal temperature uniformity - Easy to transport and install thanks to compact design and ergonomic handle The steam chamber offers a large capacity of 498 liters, and the advanced air replacement system (16–18 air exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to target parameters after brief door openings remains minimal, even at high temperatures – a crucial benefit for frequent use in routine operations. Compliance with globally recognized DIN 12880 and EN 60529 (IP 20) standards guarantees safe and standards-compliant daily operation. As such, this device is perfectly suited for quality control laboratories, industrial testing purposes, and academic research projects requiring maximum precision.

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tensión de conexión: 380 V, potencia conectada: 7,5 kVA, consumo energético específico 2 kW/m² Ledpfeytr Swjx Ab Tori Ensayos de intemperismo UV global con espectro global [similar al arco de xenón], pero con lámparas fluorescentes Volumen de la cámara de prueba: 200 litros Superficie de prueba: 0,75 m² Dimensiones de la cámara de prueba (Al x An x Pr): 1100 x 800 x 250 mm Rango de temperatura sin aislamiento: -20°C a +90°C Rango de temperatura con aislamiento: +10°C a +90°C Constancia de temperatura: ±2K Rango de temperatura del punto de rocío: +5°C a +40°C Rango de humedad: aprox. 15 - 95% h.r. Humidificación de muestras con 8 boquillas pulverizadoras El sistema utiliza fuentes de luz UV fluorescente para simular en laboratorio el espectro dañino de la radiación solar, acelerando así los efectos de envejecimiento como cambios de color, pérdida de brillo, formación de grietas, fragilización y degradación del material. Los ciclos programables de exposición UV, control de temperatura y fases opcionales de humedad y condensación reproducen y repiten de forma reproducible las cargas ambientales prácticas. Desmontaje a cargo del comprador.

Stanje: zelo dobro (rabljeno), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for handling large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical applications: • Industrial production • Plastics and metal processing • Component drying • Heat treatment • Testing technology / material testing • Laboratory and experimental applications The system is robustly built to industrial standards and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Max. temperature: 250 °C Temperature safety class: TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Lsdpfjytrzfjx Ab Tsri Load capacity: Internal housing load capacity: 400 kg Floor surface load: 1000 kg Weight Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Rated power: 54 kW Connection load: 58 kW Additional data: Minimum exhaust air volume flow: 600 m³/h Reduced exhaust air volume flow: 150 m³/h Purge time: 465 s Total vapor space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter cut-off temperature: 280 °C Temperature setpoint limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WT11-340/40 Weiss Temperature Test Chamber, Air-Cooled Temperature range: -40°C to +180°C Temporal temperature fluctuation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (heating): 2.3 K/min Temperature change rate (cooling): 1.6 K/min Heat compensation: max. 1000 W Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1800 mm, Width 895 mm, Depth 1810 mm Test chamber volume: approx. 335 liters Rated voltage: 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.9 kW Rated current: 9.0 A Refrigerant: R404A Weight: approx. 490 kg Important information for your safety as a buyer! The following steps are carried out on our listed chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Ledpfxeytqnqj Ab Tori Condition: used Scope of delivery: (see image) (Specifications and details subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Stanje: pripravljen za uporabo (rabljen), CV Instruments THR-700E appareil de mesure de dureté testeur de dureté Rockwell dureté numérique Force d’essai : 98,07N (10 kgf) Force de test/charge : 588,4N (60 kgf), 980,7N (100 kgf), 1471N (150 kgf) Hauteur maximale : 170 mm Profondeur maximale : 165 mm Dimensions : env. 215 mm x 500 mm x 750 mm (L x P x H) Poids : env. 85 kg Vous pouvez volontiers venir pour une visite. Nous pouvons organiser pour vous un transport économique ! Vous recevrez une facture conforme. Pour les clients étrangers, une facture nette peut être établie à condition de fournir un numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Lsdpfxeytn Hks Ab Tsri Visitez notre boutique et consultez également nos autres offres. Les noms de sociétés et les marques cités appartiennent à leurs propriétaires respectifs et sont uniquement utilisés à des fins d’identification et de description des produits. Des divergences dans les données techniques ainsi que des erreurs dans la description de l’article sont possibles et réservées.

Leto izdelave: 2001, stanje: rabljeno, Univerzálna skúšobná stanica na plechy a pásy Univerzálna skúšobná stanica na plechy a pásy Erichsen Model 145-60 Stav: Použité Rok výroby: 2001 Technické údaje Hydraulický pohon Max. výkon motora: 11,5 kW / 1500 1/min Výkon čerpadla (malý okruh): 12,3 l/min Výkon čerpadla (veľký okruh): 31 l/min Skúšobný valec Dierovacia sila: 665 kN / 160 bar Hydraulické otváranie skúšobnej hlavy Max. pracovný tlak: 95 bar Držiaci tlak: 50 bar Prepínateľné sily ťahu Malý rozsah ťahovej sily: 37 kN / 10 bar Stredný rozsah ťahovej sily: 225 kN / 60 bar Veľký rozsah ťahovej sily: 600 kN / 160 bar Max. zdvih ťahu: 150 mm Max. rýchlosť ťahu: 750 mm/min Indikácia zdvihu lisovacieho tŕňa: rozlíšenie 0,1 mm Elektrické pripojenie Prípojka: 400 V trojfázový, 50 Hz Istenia: 25 AT a 35 AT Prevádzková teplota okolitého prostredia: medzi +5° a +50°C Lrjdpeyr R Uhofx Ab Toi Rozmery a hmotnosť Rozmery (D/Š/V): 1800 mm / 1320 mm / 1400 mm Čistá hmotnosť: cca 2400 kg

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Na voljo je torzijski merilnik EasyDur za preizkušanje materialov. Merilno območje: 0,2 Nm / 2 Nm / 5 Nm / 50 Nm, zmogljivost dinamometra: 200 kg. Dokumentacija je na voljo. Možen je tudi ogled na lokaciji. Lredpfxeyr Rwvo Ab Tji

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Good day, We are pleased to offer you, without obligation, a used forced-air drying oven / drying cabinet manufactured by Binder, model FD 53. Lrsdeypv Ihopfx Ab Tsi Manufacturer: BINDER GmbH, Germany Model: FD 53 Article number: 9010-0082 Year of manufacture: 2015 Temperature range: +5°C above ambient temperature up to 300°C Heating time to 70°C: approx. 7 min Heating time to 150°C: approx. 24 min Heating time to 300°C: approx. 60 min Spatial temperature deviation at 150°C: approx. 6.7 +/- K Internal volume: 53 L Internal dimensions: 400 x 400 x 340 mm (W x H x D) External dimensions: 640 x 660 x 630 mm Maximum number of shelves: 5 pcs Usable area per shelf: 385 x 300 mm (W x D) Maximum load per shelf: 15 kg Permitted total load: 40 kg Weight (empty): 44 kg Electrical supply: 230V, 50/60 Hz Power consumption: approx. 5.3 A Rated power: 1.2 kW Energy consumption at 70°C: approx. 172 W Energy consumption at 150°C: approx. 429 W Energy consumption at 300°C: approx. 951 W Temperature controller: Microprocessor PID controlled Safety class: 2 (DIN 12880) Controller function (timer): 0-99 hours Areas of application: These units are suitable for the precise temperature control of non-hazardous materials, as well as for drying and heat treatment of solid or powdered stock and bulk materials by means of heat supply. The units can also be used for drying, e.g. laboratory glassware, as well as for warm storage of liquids in containers. Note: The forced-air drying oven / drying cabinet is in good condition, fully operational, and can be tested under power at our workshop. Note: The above technical data were taken from the operating manual, manufacturer’s brochures or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of delivery: 1 piece of forced-air drying oven / drying cabinet, manufacturer BINDER GmbH, model FD 53 We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Leto izdelave: 2018, obratovalne ure: 1.448 h, stanje: zelo dobro (rabljeno), Napredna rentgenska kontrola z idealnim ravnovesjem med visoko občutljivostjo zaznavanja in nizkimi obratovalnimi stroški. Napredna rentgenska detekcija, ki zagotavlja najboljše med optimalno občutljivostjo in ekonomičnim delovanjem. Primerna za širok spekter izdelkov, sistem rentgenske kontrole je mogoče prilagoditi skoraj vsaki aplikaciji. - Obdelava slike z genetskim algoritmom (GA) optimizira detekcijo glede na individualne zahteve kupca Ledpfx Aoynzaajb Tori - Integriran klimatski sistem - Uporabniku prijazen 17'' zaslon na dotik za upravljanje Tehnični podatki v priloženem letaku.

Stanje: zelo dobro (rabljeno), Binder Model: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideal for laboratory, workshop, research, electronics, materials testing, or hobby applications where constant temperatures are required. Features: - Precise digital temperature display - Robust industrial quality - Even heat distribution - Made in Germany - Ideal for professional applications What can this unit do? The BINDER ED 53 is a precision drying oven featuring natural convection. It is utilized for: - Drying samples and materials - Heating components - Tempering materials - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to high-quality insulation and workmanship, the unit operates evenly and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300°C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current consumption: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Appliance class: 2.0 - Interior volume: approx. 53 liters - Dimensions (approx.): * External: approx. 63 × 63 × 57 cm (W × H × D) Lodpfsynh E Ajx Ab Tori * Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Specifications and details subject to change and error!) For further questions, please contact us by phone.

Stanje: pripravljen za uporabo (rabljen), Binder KB-115 hladilni inkubator / toplotna pečica Zunanje mere: D 83,5cm x Š 68cm x V 85cm Ledpfeynhp Ujx Ab Teri Notranje mere: D 60cm x Š 40cm x V 46cm Temperaturno območje: -10°C - 100°C Nazivna napetost: 230V Vabimo vas na ogled. Prejmete pravilni račun. Za tuje stranke lahko izstavimo tudi neto račun. Pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge naše ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in služijo le za identifikacijo in opis izdelkov. Možna so odstopanja od tehničnih podatkov ter napake v opisu izdelka, ki si jih pridržujemo.