Er.-IS. Eroglu Industrie Service

Stanje: rabljeno, Stroj za čiščenje, pranje in razmaščevanje PERO tip ROBOMAT 7A Uporabna dolžina: 1600 mm Uporabna širina: 1040 mm Uporabna višina: 960 mm Višina nalaganja: 800 mm Največja masa tovora: 1500 kg Hjdpfx Afozg Ux Ejaop

Stanje: zelo dobro (rabljeno), BIO-CIRCLE Hsdjzgclmjpfx Afajp Model: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Cleaning System The RWR units from Bio-Circle are the optimal solution for cleaning internal circulation systems—without disassembly. The unit is compact, quiet, and very easy to operate. Thanks to its completely closed system, there are no odours from the cleaning agent or contaminated water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz, 16A CEE 5p 6h plug Drain → 1 1/4" outlet Technical Specifications: Type of contamination: Scale, rust (mineral), oil, grease Number of parts: Single components, small series, low volume Component geometry: Whole parts (no disassembly) Seal of quality: Stainless steel, service package available Maximum fill volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of cleaning unit without tank filling: 180 kg Application area: The RWR 80 L KST Fully Automatic PLC is designed for plastic injection moulding applications and everywhere cooling channels (circulation systems, pipelines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the unit is switched on, it begins to heat up. During the heating phase, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and flow direction change run automatically after confirming the instructions displayed on the screen. Condition: Used Scope of delivery: (See picture) (Subject to changes and errors in the technical data. Information is provided without guarantee!) For any further questions, we are happy to assist you by phone.

Stanje: nepreverjeno (rabljeno), DÜRR Type: DÜRR 1K Adhesive Application System Dürr 1K adhesive application system with drum pump, metering unit, and heated hose (approx. 5 m). Technical machine description: Condition of the system: Drum pump, feed hoses, metering unit, etc. are contaminated with old adhesive and need to be cleaned or replaced. The system has approx. 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Max. air inlet pressure: 6 bar Dimensions: approx. 1.5 x 1 x 1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single drum pump (110014004) Hedpfx Afozgckcsasp Weight: approx. 300 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have any further questions, we will be happy to assist you by phone.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, obratovalne ure: 5.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.519, leto zadnje generalne obnove: 2026, vrsta zaščite (IP koda): IP65, višina izmeta: 1.100 mm, nazivna moč: 4 kW (5,44 KM), obratovalni tlak: 6 letvica, obratovalna temperatura: 80 °C, delovno območje: 950 mm, največja hitrost vrtenja: 1 obr/min, vrtljajska hitrost (min.): 1 obr/min, temperatura: 80 °C, skupna višina: 700 mm, priključek za stisnjen zrak: 6 letvica, Čistilna naprava BvL model Ocean RW 900 S Hjdpfxozf Hm Se Afaop Možnosti, kot so filtracijska tehnika itd., so še vedno možne

Leto izdelave: 2017, stanje: delavnici obnovljeno (rabljeno), Pozdravljeni, ponujamo dva obnovljena pralna avtomata IBS tipa MAXI 78 in MAXI 91-2. Pri obeh napravah so bile dodatno zatesnjene tudi črpalke. Ogled in prevzem možna v Einbecku. Onesnažene predmete za čiščenje se namesti v vrtljiv pralni košar in zapre pokrov. Po nastavitvi želene temperature in časa pranja se naprava vklopi in pralna raztopina v rezervoarju segreje. V zaprti napravi se košara vrti okoli lastne osi s konstantno hitrostjo. Črpalni agregati sesajo pralno raztopino iz rezervoarja in jo preko šestih cevi iz nerjavečega jekla z ravno razpršilnimi šobami razpršijo po celotni površini. Med enakomernim vrtenjem motorno gnanega koša je čiščenje intenzivno z vseh strani z vročo raztopino. Po končanem ciklu čiščenja se naprava samodejno izklopi. Prednosti: - 2 črpalki postavljeni horizontalno - 6 trosmernih cevi iz nerjavečega jekla - robustna izdelava iz nerjavečega jekla - dodatna košarica za čiščenje najmanjših delov iz nerjavečega jekla (Ø 170 mm) - vrtljiv pralni košar iz nerjavečega jekla, pogon preko klinastega jermena z ločenim motorjem - odvod pare - perforirana plošča iz nerjavečega jekla s filtrom nad rezervoarjem - zaščita proti pomanjkanju vode Hsdpfjzcuxxex Afaop - posamezno nastavljive noge za višino

Leto izdelave: 2016, stanje: dober (rabljeno), 1 rabljena naprava za čiščenje delov z vročo vodo Blagovna znamka: Bio Circle Tip: HTW II 800 Letnik izdelave: 2016 Material: nerjaveče jeklo Električno gnjen vrtljiv koš Učinkovita in stroškovno ugodna Skupna širina: 1175 mm Skupna globina: 1145 mm Višina pri zaprtem pokrovu: 1380 mm (z odvodnim lokom) Višina pri odprtem pokrovu: 1780 mm Premer notranje mrežaste košare: 800 mm Maks. uporabna višina: 400 mm Hjdpfxezb Iyao Afaep Maks. nosilnost: 350 kg Prostornina rezervoarja za pralno tekočino: 150 litrov Električna priključna moč: 6 kW Napetost: 400 V Frekvenca: 50 Hz Pretok črpalke za čiščenje: 4,8 m³/h Tlak pršenja: 2,5 bara Električni grelec v rezervoarju: 5,3 kW Temperatura obdelave: 10°C do 85°C Nosilnost: 150 kg Priključek za svežo vodo: 1/2″ Iztočni ventil: 1 1/4″ Teža: 330 kg

Leto izdelave: 2017, obratovalne ure: 14.932 h, stanje: rabljeno, številka stroja/vozila: IntNr231417, Descripción técnica – PERO RO Fabricante: PERO AG Modelo: RO R1 / 414-EX Año: 2017 / 10 Tipo de máquina: Sistema de limpieza / Desengrasadora Proceso: Limpieza con disolvente (p. ej., alcoholes modificados o hidrocarburos) Datos técnicos (típicos para esta serie): Sistema de limpieza: sistema de circuito cerrado, totalmente automático Dimensiones de la cámara de trabajo: aprox. 530 × 320 × 200 mm Peso máximo de carga: aprox. 50 – 80 kg Disolvente: alcohol modificado (a base de hidrocarburos) Secado: secado al vacío Control: control PLC con panel táctil Equipamiento: unidad de destilación integrada, sistema de filtrado, separador de aceite Consumo de energía: aprox. 10 – 15 kW Bomba de vacío: integrada Hedpfx Afoy U Hkxjajp Estado: Muy buen estado, bien mantenida – en producción continua Características especiales: Sistema de limpieza energéticamente eficiente con circuito de disolvente cerrado Alta calidad de limpieza con consumo mínimo de disolvente Ideal para industrias de precisión y mecanizado Se puede inspeccionar en funcionamiento previa cita. ¡Sujeto a cambios y errores en los datos técnicos y especificaciones, así como a venta previa!

Leto izdelave: 2021, stanje: rabljeno, Karl Roll RUK0200-130-150-04 Avtomatiziran sistem za pranje delov (2021) Avtomatski sistem za čiščenje se uporablja izključno za čiščenje in razmaščevanje kovinskih delov z uporabo vodnih medijev. Vključuje napajanje z demineralizirano (VE) vodo. 3x400V/50Hz – 415kW/647A skupna priključna moč Velikost serije/nosilca obdelovanca: 2000 x 1300 x 1600 mm (D x Š x V) Maks. prepustnost: 8,0 serij/uro pri teži serije 300 kg (vključno z nosilcem), odvisno od programa Maks. teža serije: 450 kg (nosilec + izdelki). Teža mora biti enakomerno razporejena v košari. Volumen čistilnih postaj: 7550 litrov – približno, Postaja 1 6900 litrov – približno, Postaja 2 6900 litrov – približno, Postaja 3 7500 litrov – približno, VE rezervoar za vodo Ogrevanje – električno: 96 kW – Postaja 1 Hjdpfxjy Uxvto Afaep 72 kW – Postaja 2 72 kW – Postaja 3 24 kW – VE rezervoar za vodo 72 kW – Postaja za vroči zrak Maks. temperatura čistilnih kopeli: 75 °C Maks. temperatura VE rezervoarja: 65 °C Proces: Postaja 1: Prvo čiščenje v vroči vodni raztopini, • Krožni filtrirni krog s kontrolo tlaka • Naprava za tlačni obtok • Izpust tekočine • Oljni separator • Kratek hod prek vozička • Ponovno doziranje dveh različnih medijev • Dopolnjevanje neposredno ali prek kaskadnih črpalk iz postaje 2 Postaja 2: Prvo izpiranje v vroči vodni raztopini • Krožni filtrirni krog s kontrolo tlaka • Kratek hod prek vozička • Dopolnjevanje neposredno ali prek kaskadnih črpalk iz postaje 3 Postaja 3: Drugo izpiranje v vroči vodni raztopini • Krožni filtrirni krog s kontrolo tlaka • Kratek hod prek vozička • Recirkulacijski DI vodni sistem, • Neposredno dopolnjevanje Postaja 4 (na iztovarjalni progi): Sušenje z vročim zrakom • Ventilatorji • Grelna spirala s temperaturnim nadzorom • Dovod zraka prek filtra • Nastavljiv obvod izpušnega zraka Stanje: Zelo dobro

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23-006, For sale is an ultrasonic cleaning device / ultrasonic cleaning system from Schmitt Ultraschalltechnik GmbH, model SUT70USFL. The unit features a robust stainless steel housing and is designed to be mobile on castors. It is equipped with a lid with handles, an operator panel with main switch, temperature display/controller, and separate function switches for various operations. Thanks to its 230 V connection, the system is versatile and suitable for workshops, production, maintenance departments, parts cleaning, or industrial applications. The machine is used, but in like-new condition. Ideal for professional cleaning of workpieces, tools, components, or small parts. Technical specifications according to nameplate: Manufacturer: Schmitt Ultraschalltechnik GmbH Type / Model: SUT70USFL Serial number: 23-006 Year of manufacture: 12/2023 Operating voltage: 230 V Power: 0.8 kW Internal reference: RG-231214/0839 Design: Stainless steel housing Mobile: Mounted on castors CE marking present Features: - Ultrasonic cleaning system in stainless steel housing - Lid with handles - Operator panel with main switch - Temperature controller / temperature display - Separate function switches - Mobile design - 230 V connection via industrial plug - Compact design Condition: Used, with normal signs of use on the stainless steel housing. Terms of sale: Hjdpey Uwcxsfx Afajp Sale exclusively to commercial customers/businesses. The machine is sold as a used item, as described and/or as inspected, with any and all warranty and liability for material defects excluded. No guarantee is provided. Subject to errors and prior sale. Inspection possible by appointment. Sale ex location.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 17.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 863/2020, skupna višina: 2.100 mm, notranja dolžina: 530 mm, notranja širina: 320 mm, notranja višina: 200 mm, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, električna varovalka: 50 A, vhodni tok: 40 A, temperatura: 70 °C, ogrevalna zmogljivost: 6 kW (8,16 KM), nosilnost: 40 kg, Oprema: dokumentacija / priročnik, Höckh Multiclean Lean Concept III uključujući punjenje novim rastvaračem Safechem Dualene 1601 Sve je potpuno spremno za upotrebu i prodaje se kao kompletan paket. Postrojenje omogućava potapanje i prskanje, isparivačko odmašćivanje i čišćenje ultrazvukom. Daljinsko održavanje je pripremljeno i zahteva samo internet konekciju. Pored samog sistema, u obimu isporuke se nalaze: - automatski transporter za korpe - 3 korpe za čišćenje - hladnjak za hlađenje instalacije - potpuna dokumentacija Sistem može biti pregledan i testiran pre kupovine. Nakon kupovine, rado ćemo pomoći pri demontaži i utovaru, kao i pružiti kratku obuku za rukovanje i održavanje mašine. Hedpfxoy Sxn Dj Afaop Sistem je potpuno ispravan i u veoma dobrom stanju. Prodajemo ga jer smo u međuvremenu pustili u rad veći sistem.

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: E 118/09025, I am selling a polishing machine for fine polishing OTEC - Type: ECO 1 X 18 - Machine No.: E 118/09025 Hsdpjy Rzxcefx Afaep - Year: 2009 - Weight: 50KG The machine is regularly serviced, maintained and is in excellent condition. The polishing machine has been used very little and is practically new. It is suitable for fine polishing, cleaning and deburring the most demanding pieces that have been through various machining processes. Various workpieces are placed in a tank together with granulate and coolant, which rotates and vibrates at the same time, resulting in polishing. The machine works fully automatically because you can set the polishing time, vibration frequency and rotation speed. It is connected to the mains and ready to start.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 70/060260, I am selling a polishing machine for fine polishing OTEC - Type DF 70 - Serial No. 70/060260 - Year 2006 - Power 2KW - Weight 450kg - ACCESSORIES OF THE MACHINE - coolant tank - automatic dosing of polishing paste Hsdpfx Ajy Rzwxsfaop - printer, report - 10 pieces of tool holders - 1 piece of mixer holder I am selling a polishing machine for very fine polishing of various metal parts after all machining. It can also be used to clean various very dirty, stubborn surfaces on parts made of various materials. The machine is fully automatic and has an additional coolant tank, which allows the granulate and pieces to not heat up during polishing, so it can polish continuously for 10 or more hours. The workpieces are polished by being completely or partially immersed in the polishing material, so that the granulate reaches all surfaces of the piece being polished evenly and in this way the piece is polished even in the deepest and most difficult to reach zones. The machine has worked very little and has been regularly maintained. It is connected to the electrical network and ready to start.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, WEBEN / CEEVER Washing Tunnel with Robot, Conveyor, and Inspection System Manufacturer: WEBEN / CEEVER Application: Automated parts handling after upstream press (press not included), washing, drying, and quality control Description: This system is an automated solution for removing and transferring parts from an upstream press. Robots pick up the parts and use a conveyor and transport system to move them through an industrial washing tunnel (wet cleaning) and subsequently through an inspection/measurement system for quality checking. The entire process chain is designed for continuous operation, integrating robotic handling, washing process, conveyor technology, and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of manufacture: 2021 Cleaning process: Spray-spray process (water-based), air blow-off, hot air drying Max. workpiece dimensions: Length 1400 mm Max. workpiece dimensions: Depth 2000 mm Max. workpiece dimensions: Height 10 mm Max. workpiece weight: 12 kg Machine dimensions: Width 3000 mm Machine dimensions: Depth 35,500 mm Machine dimensions: Height 3400 mm Weight (empty): 20,000 kg Weight (operational): 27,000 kg Product-contact material: Stainless steel AISI 304 Washing tank capacity: 4,000 liters Washing tank heating: electric 80 kW Rinsing tank capacity: 2,500 liters Rinsing tank heating: electric 40 kW Washing pump: 2,000 l/min, 6 bar, 30 kW Rinsing pump: 900 l/min, 6 bar, 15 kW Filtration (washing): 4 bag filters, 100 µm Drying: electric 48 kW Electrical connection: 380–400 V / 50 Hz / 3 Ph + N Total connected load (washing tunnel): 385 kW Hsdpfsy Ein Uox Afasp Compressed air for automation: 6–8 bar, 1/4″ connection Compressed air for blow-off: 6–8 bar, 4 connections, consumption approx. 30,000 Nm³/h, 1 1/4″ connection Technical Data – Robot, Conveyor, and Inspection System Control: Siemens PLC S7-1500 1517F Operating panel: Siemens TP1900 Comfort Robot: KUKA KR50 R2500 IONTEC with KRC4 (multiple robots in the line) Conveyor technology: several conveyor lines / transport zones Max. conveyor speed: up to 24 m/min Inspection system: laser measurement system with automatic OK/NOK evaluation and sorting Location: EU

Stanje: rabljeno, TEHNIČNI PODATKI - Kapaciteta: 1900 [l] - Kapaciteta črpalke: 430 Hjdpfoy Dikmjx Afasp - MOTOR: 7,5 [kW] - Dimenzije koša: 1790 x 800 [mm] - Največja uporabna nosilnost: 1000 [kg] - Teža stroja: 1500 [kg]

Leto izdelave: 2005, stanje: rabljeno, Tehnične podrobnosti: Hsdpfx Afeyzhnlsaep Nosilnost v kg: 230 kg

Stanje: novo, Leto izdelave: 2026, Takoj na voljo za prevzem (nova naprava) Metalclean P60 pršilna čistilna naprava iz nerjavečega jekla Enorezervoarska pršilna čistilna naprava z vrtljivim košem. Hsdpfx Afoyymbhoajp Uporabna mera = premer 590 mm, višina 380 mm Nosilnost / na polnitev = 100 kg Kapaciteta rezervoarja = 60 litrov Pršilni tlak = 3 bar Obratovalna napetost = 3 x 400 V/N/PE 50 Hz

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.260 mm, skupna širina: 1.110 mm, skupna višina: 2.600 mm, skupna masa: 1.600 kg, Uporabljeni čistilni stroj tipa RCTS petite / 2 Tehnični podatki: Čistilno sredstvo: ogljikovodik brez halogenov oziroma modificiran alkohol Priporočena je uporaba visokokakovostnega topila, kot je (DOWCLENE TM 1601 ali) DOWCLENE 1621 Z oznako CE v standardni valjčni izvedbi v skladu z risbo 5I05204X1-3---- Naprava ustreza 31. nemški uredbi o varstvu pred emisijami (velja od 21.08.2011), Švicarski uredbi o čistosti zraka (velja od 01.03.1998), Avstrijski uredbi VAV (velja od 26.07.2022) ter EU VOC Direktivi 199/13 Naprava RCTS je zasnovana kot enokomorni potopni sistem. Sistem deluje pri polnem vakuumu pri približno 100 mbar absolutnega tlaka, zato popolna Ex-zaščita ni potrebna. Velikost košare/velikost serije: 260 x 160 x 95/100 mm po dogovoru Hsdjyud Nqopfx Afasp Največja teža serije: 15 kg Leto izdelave: 2018 Obratovalne ure: na zahtevo Stanje: generalno obnovljen v letu 2026, v zelo dobrem stanju

Leto izdelave: 2011, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Clean-o-mat SP 120 Uporabni premer košare cca 1140 mm Priključne vrednosti: 230/400 V/24 A/50 Hz Hodpoyth Uzofx Afaop Uporabna višina cca 500 mm Motor črpalke: 4 kW Višina nakladanja cca 830 mm Ogrevalna moč: 9 kW Dovoljena obremenitev košare: 500 kg Pogon za vrtenje košare: 0,09 kW Volumen tekočine: 210 l Enostopenjsko izsesavanje pare: 0,45 kW Pretok črpalke: 280 l/min Skupna višina cca 1250 mm

Leto izdelave: 2020, obratovalne ure: 6.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning items whose contaminants can be removed by spraying with detergent under pressure. The loaded basket, filled with items to be washed, is guided evenly past the nozzles installed above and below by means of a rotary wheel. Additionally, the wash items are sprayed by a nozzle system located in the door and at the rear of the machine. Thanks to the high spray pressure and a low rotation speed, a uniform cleaning result is achieved. TECHNICAL DATA Hedpfxeyr Dkcs Afasp Model: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm height Maximum load: 100 kg with evenly distributed weight Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm height without roller conveyor Infeed height: approx. 1,240 mm Detergent: service water, aqueous, pH 7 - 11, max. +70° C, non-foaming, max. concentration 5% Detergent fill volume: approx. 460 L Rinse agent: aqueous, pH 7 - 11, max. +70° C, non-foaming, max. concentration 5% Rinse agent fill volume: approx. 240 L Offer includes roller conveyor and wash baskets. For further information, please contact us.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.100 mm, skupna širina: 1.300 mm, skupna višina: 1.600 mm, vhodna napetost: 380 V, nosilnost: 500 kg, lastna masa: 550 kg, Oprema: dokumentacija / priročnik, Komorna pralna naprava z vrtljivim rešetom. Največja teža obdelovanca 500 kg, velikost košare 74x74 cm, največja višina obdelovanca 66 cm. Vključuje voz za nalaganje in čistilni prašek. Navodila za uporabo so na voljo. Hsdpfxsymggvs Afajp

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Fully Automatic Solvent Cleaning System KP50 HMA Designed for operation with solvents (hydrocarbons or modified alcohols) under full vacuum. The cleaning and drying process runs fully automatically in a closed work chamber under vacuum. Component cleaning is performed by spraying, turbulent flooding, ultrasonic cleaning, and vacuum-assisted cleaning with freshly filtered and distilled solvent from the two storage tanks. Additionally, steam degreasing with high-purity solvent vapor directly from the main still is possible. The final vacuum drying ensures 100% dry components, and the double condensation stage guarantees minimal solvent loss and exceptionally low emission and AGW values. Technical Data / Features: - 2-tank FULL VACUUM system including main and bypass still - Designed for flammable solvents (FP >55°C) - Includes basket holder with swinging/rotating device - Basket dimensions: 520 x 320 x 200 (h) mm - Batch weight: max. 50 kg/batch - System dimensions: approx. 2,300 x 2,250 x 3,000 mm (W x D x H) - Ultrasonic: 750 W, 40 kHz - 2 pcs. bag filter size 1 + provision for an additional filter - Automatic door for the work chamber - Work chamber door in glass - Double loading table (cross-adjustable) in front of the work chamber - 12" operator panel - Main and bypass still - Remote maintenance module An optional chiller can be supplied if no cooling water is available onsite. Hodpsyi Sf Nsfx Afaop Price ex works, excluding VAT, transport, installation/commissioning.

Stanje: rabljeno, The SUNCOMBE SteriWasher is an innovative, robust, high-performance, and fully validatable parts washer designed for use in the pharmaceutical, biotechnology, food, beverage, healthcare, and other critical sectors. The wash chamber is accessible via a heavy-duty hinged door and is manufactured from 316 stainless steel with a hygienic design. By utilizing a combination of specially developed variable-power spray technologies, the washer delivers high-energy cleaning along with energy-efficient rinsing, selectable via simple recipe selection. Description The SteriWasher™ parts washers incorporate both proven and new technologies to provide an environmentally friendly washing solution with low water and energy consumption for production and research environments, cleaning a wide range of equipment—from critical small parts and tools to large mixers, drums, and containers. Available in chamber sizes ranging from 0.6 m x 0.6 m x 0.6 m up to the largest 1.5 m x 1.5 m x 1.5 m. Custom variants in any chamber dimension can be supplied to meet your requirements. The washers feature crevice-free constructions and are equipped with an air-tight, leak-proof inflatable door seal for the entire unit and wash chamber. Standard or tailor-made racks with individually validated cleaning positions are available, removable and loadable onto mobile trolleys for easy loading and unloading. Single-door and dual-door pass-through versions are available. Washers are built in single-door, straight-through double-door, or 90-degree double-door configurations, using 316 stainless steel and meeting cGMP, EHEDG, ASME BPE, and GAMP standards for use in wash areas or cleanrooms. Features • 316L stainless steel radius corners, sloped design, crevice-free wash chamber • Standard and custom chamber sizes • One or two chemical dosing systems • Automatic interlocked hinged door with optional window and interior lighting • Inflatable door seal for maximum safety • Loading trolleys and racks designed for specific equipment to be cleaned • Hygienic pneumatically actuated valves and instruments • Hygienic stainless steel pumps • Stainless steel covers • HEPA-filtered air drying and cooling • Pharmaceutical-grade washer Specifications Hodpfxsyf N Ims Afajp KVP philosophy: Total loss, full or partial recovery Discharge temperatures: Ambient up to 90°C (aqueous) – ambient (solvent) Materials: 316 stainless steel, duplex, or Hastelloy Operating temperature: Ambient to 95°C (120°C turbo drying cycle) Operating voltage: 230VAC or 400VAC (24VDC control) Automation: CIPSuite Level 2000 to 4000 (DCS control option) Reporting: Printed records, optional 21CFR11 electronic records and batch reports.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: hidrostat, barva: zelen, skupna masa: 1.200 kg, Leto izdelave: 2026, Oprema: dodatne luči, hidravlika, nadzor oprijema, nastavljiva roka, nastavljivo podvozje, Mazaka Sunlite SL240- SL340- SL440- SL510- SL640 krtača za čiščenje sončnih panelov je profesionalna rešitev, zasnovana za zagotavljanje največje učinkovitosti fotovoltaičnih modulov. Hsdpfox Thn Njx Afaep Opremljena je s kakovostnimi, neabrazivnimi mehkimi ščetinami, ki varno odstranijo prah, umazanijo, ptičje iztrebke in druge okoljske ostanke, ne da bi poškodovale površino panelov. Z ergonomskim dizajnom in vzdržljivo konstrukcijo zagotavlja visoko učinkovitost tudi pri dolgotrajni uporabi.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, temperatura: 60 °C, Immediately available! Function Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaning agent (wash liquor). Contaminated items to be cleaned are placed into the rotating wash basket and the lid is closed. After setting the desired wash temperature and time, the unit is switched on and the wash liquor in the tank is heated. Inside the closed machine, the basket rotates at a constant speed on its axis. The pump units extract the wash liquor from the tank and distribute it through 6 stainless steel spray pipes equipped with overlapping flat fan nozzles. The items to be cleaned are intensively sprayed from all sides with the hot cleaning solution due to the even rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally arranged pumps - 6 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, belt drive via separate motor - Steam extraction - Stainless steel perforated plate with filter basket above the wash tank - Suction filter in front of pump chamber - Water shortage protection - Individually height-adjustable leveling feet Technical Data - Tank / Basket Capacity: 280 l - Tank / Basket Diameter: 1150 mm - Load Capacity: 350 kg / optionally 500 kg - Temperature Range: min. - max. 0–60 °C - Working Height: 700 mm - Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Hodpfx Afsx Izwmjaop - Weight: 250 kg - Heating Power: 10 kW - Spray Quantity: 2 x 10,800 l/h - Pump Pressure: 2.3 bar - Material: Stainless Steel - Electrical Connection: 13.5 kW / 400 V / 50 Hz / 32 A

Stanje: dober (rabljeno), Leto izdelave: 2003, Naprava za čiščenje delov, IBS – rabljeno - : Cena na kos: 350 € (neto) Proizvajalec: IBS Scherer GmbH Tip: Tip F2 Leto izdelave: 2003 Serijska številka: 44675 Električni priključek: 1/N/PE 230V, 50Hz Nazivna moč: 18W, 0,2A Nosilnost: 60 kg Širina: 800 mm Lastna teža: 50 kg Velikost soda: sod 50 litrov Material ogrodja: jeklo Hedpox El A Uefx Afajp Višina: 1125 mm Vrsta čiščenja: specialno čistilo Širina čistilnega korita: 790 mm Globina čistilnega korita: 540 mm Stanje: dobro Na voljo: takoj Lokacija: skladišče Frankenberg / Saška