MEKITECH GmbH

Stanje: rabljeno, Leto izdelave: 2015, proizvajalec krmilnikov: Fanuc, model krmilnika: 31i-B, Description: General: Year of manufacture: 2015 Control: Fanuc i 31-B Turning diameter: 175 mm Maximum turning length: 678 mm Main spindle: Technology: motor spindle Speed: 4,500 rpm Power: 11 kW Bar capacity: 65 mm C-axis: 0.001° Clamping cylinder: hollow clamping cylinder Chuck: collet chuck Sub-spindle: Technology: motor spindle Speed: 5,000 rpm Power: 7.5 kW Bar capacity: 51 mm C-axis: 0.001° Clamping cylinder: semi-hollow clamping cylinder Chuck: collet chuck Tool turret I (X/Y/Z/B): Technology: tool turret Number of stations: 12/24 Tool mount: BMT Powered tools: 6,000 rpm X-axis: 330 mm Y-axis: 80 mm (+/- 40 mm) Nwodpfx Agsy Hnt Ejxsf Z-axis: 1,040 mm B-axis: 182° (+/- 91°) Tool turret II (X/Y/Z): Technology: tool turret Number of stations: 12/24 Tool mount: BMT Powered tools: 6,000 rpm X-axis: 127 mm Y-axis: 65 mm (+/- 32.5 mm) Z-axis: 678 mm Equipment / Accessories: Chip disposal: chip conveyor Coolant supply: 2x high-pressure coolant pump Bar feeder: IEMCA Master 80 HF – 4 meters Finished parts removal: part gripper + conveyor belt Setup mode: electronic handwheel

Stanje: rabljeno, Leto izdelave: 2011, Turning diameter: 410 mm Nwsdoy Hl Exopfx Agxjf Turning length: 800 mm Control: Sinumerik 840 D ERGOLine Siemens Swing diameter over bed: 700 mm Max. turning diameter: 410 mm Travel - X axis: 300 mm Travel - Z axis: 850 mm Spindle speed range (max.): 4,000 rpm Chuck diameter: 260 mm Spindle bearing diameter: 130 mm Drive power (40% duty cycle): 34 kW Drive power (100% duty cycle): 25 kW Max. torque: 280 Nm C axis: 0.01° Turret (number of stations): 12 Tool holder: DIN 69880 / 40 mm Driven stations: 6 positions Speed range (driven tools): ~ 4,000 rpm Drive power (driven tools, 40% duty cycle): 11.3 kW Drive power (driven tools, 100% duty cycle): 5.6 kW Rapid traverse (X / Y / Z): 30 m/min Tailstock quill travel: 800 mm Morse taper: MT 5 Total power requirement: 65 kVA Machine weight: approx. 6.2 t Space requirements: approx. 5.5 x 3.0 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 800 V3 - Spindle hours: approx. 14,779 h - Package for unstable power networks - Extended operator panel - Hollow clamping device 95 mm - Hollow spindle stop 95 mm - Differential pressure clamping for main spindle - Includes workbench - Includes tool cabinet - Includes tool cabinet for VDI holders - Includes 2x driven tools - Includes 6x tool holders

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, premer struženja: 460 mm, največja hitrost vretena: 3.500 obr/min, model krmilnika: Fanuc 32iTB iHMI, največja hitrost protivretena: 4.500 obr/min, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Swing diameter over bed: 760 mm Swing diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Chuck-to-chuck distance: 625 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70/-50 mm B-axis travel: 640 mm Rapid traverse: 30/30/15/30 m/min Nwsdpfx Aey Hk Nijgxsf Maximum spindle speed: 3,500 rpm, ASA 8" A2 Maximum subspindle speed: 4,500 rpm, ASA 6" A2 Outer spindle bearing: 200 mm Inner spindle bearing: 130 mm Spindle bore: 86 mm Bar capacity: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Control: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, premer struženja: 460 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 86 mm, prehod palice: 78 mm, model krmilnika: Fanuc 32iTB iHMI, širina na sredini: 689 mm,

Stanje: dober (rabljeno), Leto izdelave: 2010, 660 mm premer struženja, 983 mm dolžina struženja, Maksimalna razdalja med konicama 1500 mm. Y-os +/-210 mm, C-os 0,001 stopinje na obeh vretenih, Vrtljaji vretena 3.000 min^-1. Nedpfxsy Hiibs Agxewf Prehod palice 80 mm. Glavno vreteno 22 kW, Stružno-frezalno vreteno 12.000 min^-1, Računalniška B-os mlinarskega vretena +/-120 stopinj. Moč rezkanja 18,5 kW, Menjalec orodja za 100 postaj, Mlinarsko vreteno Capto C6, hidravlični podpornik, hlajenje, merilec orodij, funkcija za zobljenje na vreteno 1, kontrola Mori Seiki MSX-701IV.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 60.425 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.050 mm, premer struženja: 465 mm, potovalna razdalja osi X: 300 mm, zunanji premer vpenjalne glave: 325 mm, model krmilnika: Fanuk Series 21I-TB, TEHNIČNI PODATKI Maksimalna dolžina struženja: 1.050 mm Premer struženja nad prečnim suportom: 350 mm Maksimalni premer struženja: 465 mm Premer vpenjalne glave: 325 mm Pomik X-osi: 300 mm Pomik Z-osi: 1.050 mm Maksimalno število vrtljajev: 3.500 min⁻¹ Maksimalni navor: 630 Nm Premer ležaja v vretenu: 120 mm Maksimalni premer palice: 90 mm Hod konjička: 850 mm Hod tulec konjička: 150 mm Hitri pomik X/Z-osi: 30 m/min Število položajev revolverske glave: 12 Nwodpfxsy Hg S Hj Agxef Držalo orodij: VDI 40 PODATKI O STROJU Krmiljenje: Fanuc Series 21I-TB Pogonska moč: 33 kW

Stanje: rabljeno, DOOSAN PUMA 280 – Leto 2012 Ø630 mm nihaj nad posteljo Nwodpfx Agoy Hgwcsxsf Ø500 mm nihaj nad sani Ø420 mm maks. premer struženja 658 mm maks. dolžina struženja Ø76 mm premer obdelovalne palice 3500 vrt/min hitrost vretena 10 orodnih postaj Transporter ostružkov in zaboj

Stanje: dober (rabljeno), Leto izdelave: 2019, V dobrem tehničnem stanju in popolnoma funkcionalen. Leto izdelave 2019 - maks. premer struženja 220 mm (za standardni revolver) - maks. dolžina struženja 356 mm - vpenjalni premer nad ležiščem 641 mm - vpenjalni premer nad prečnim saneh 413 mm - pomiki osi X/Z – 200 / 356 mm - hitri pomiki osi X/Z – 30,5 m/min - velikost vretena A2-5 - maks. moč 11,2 kW, pogon vretena Vector Drive - maks. navor 102 Nm - maks. hitrost vretena 6.000 /min - prehod skozi vreteno za material v palicah 44 mm - avtomatska hidravlična vpenjalna glava 165 mm - 12-pozicijska revolverska glava VDI40 (opcijsko BOT ali Hibrid) - opcija pogona orodij in C-os vretena - rezervoar hladilne tekočine 114 l s črpalko Nsdpsy Hgvxefx Agxewf - električni priključek 3x400 V/50 Hz, 14 kVA - teža stroja 3.450 kg

Stanje: dober (rabljeno), Leto izdelave: 2023, CNC Multi-Axis Turning Center Manufacturer: Hyundai WIA Model: LM1800TTSY Control: Siemens 840D Shopturn with 3D Simulation Year of manufacture: 2023 Technical Specifications: Slant-bed design with box ways in X-/Y-axis, Z-axes with linear guides Sub-spindle and double turret system Travel distances: - X/X1: 165 / 195 mm - Z1/Z2: 700 / 720 mm - ZB: 668 mm - Y: 100 mm Rapid traverses: - X/Y/Z: 20 / 7.5 / 40 m/min Max. turning diameter: 230 mm Max. turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & Milling Unit: 2 turrets with 12 stations each (optionally 24) System: BMT55P Milling drive: - Speed: 5,000 rpm - Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 litres Direct position measuring system (X1/X2, Z1/Z2, Y) Coolant temperature compensation (w/ air conditioning unit) High-pressure cooling 20 bar Chip conveyor (belt conveyor) Siemens network expansion Bar loader interface Extensions & accessories Software & Electronics: ShopTurn with 3D simulation Machine transformer Measurement & Automation Technology: Automatic Q-setter Renishaw Linear positioning sensor (for main and sub spindle) Workpiece Handling: Parts catcher main spindle Parts catcher sub spindle with belt discharge Workpiece ejector Clamping technology: Nwodoy Hfrljpfx Agxjf Hainbuch Spanntop mini Main spindle (AX Pull size 65) Sub spindle (AX Fix size 65) Peripherals: Bar loading magazine Sprint 565 S2 by LNS For bars up to 3,000 mm length Diameter: 5 – 65 mm Reduction tube set (various diameters) Extraction unit ARNO-2VF Purchase price in 2023: €330,000 The machine has had little use and is in very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, We offer you the following: Manufacturer: DMG MORI Model: CLX 450 TC Year of manufacture: 2022 Control: Celos with Siemens 840D sl Operate Technical data: Max. turning diameter: 400 mm Turning length: 1,100 mm Bar capacity: max. 65 mm Travel axes: x-axis travel: 276 mm z1-axis travel: 755 mm z3-axis travel: 775 mm y-axis travel: +/- 100 mm b-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Nwjdpfsy Hfpwsx Agxsf Drive power: 14 / 17 kW Max. torque: 275 / 345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14 / 17 kW Max. torque: 275 / 345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8 / 10.5 kW Tool interface: HSK-A 63 Tool changer: 60 positions Max. torque: 73 / 90 Nm Hollow clamping device: Ø 67 mm Technical features & accessories: - Absolute, direct linear measuring systems on x- and y-axes - Double switching filter - DMG Mori IoT connector - Dynamic dual-pressure clamping for main and counter spindle - Three-jaw power chuck, SMW Autoblok for main and counter spindle - Tailstock function for counter spindle incl. foot switch - Hinged belt chip conveyor incl. coolant tank - Coolant system 8 / 20 bar, consisting of: - Coolant tank 600 l - Belt filter system - Lifting pump - Mechanical oil mist separator - Chuck wash system on main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Window cleaning for safety glass - Workpiece probe RMP40, Renishaw - Tool probe Z-Nano, Blum - MPC (Machine Protection Control) - Linear measuring system for z1-axis - Automatic working area door, electric - Electrical interface for Robo2Go, includes: - Additional compressed air connection - Additional Ethernet interface - Robot power supply through the machine - Bar machining package Ø67 mm, consisting of: - Max. bar diameter Ø67 mm - Workpiece pick-up device with left-hand discharge conveyor for parts up to Ø80 mm x 200 mm, max. workpiece weight 6 kg - Pneumatic ejector for counter spindle - Connection for bar feeder or bar magazine - Tropical package - Signal provision for operating data acquisition device - Electronic handwheel - I/O configurable via M-function - Expansion of the number of tool data and tool offsets to 3,000 - Off-center turning and milling - Complete machining of shaft parts - Technology cycle for applying alternate spindle speeds - Multi-thread cycle 2.0 - Technology cycle with dialog-guided programming - Technology cycle for parting off the workpiece Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Technical specifications are subject to change and errors. Prior sale reserved!

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 350 mm Turning length: 650 mm Control system: 840 D SL ShopTurn Siemens Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Main spindle speed range: 0 – 4,500 rpm Main spindle drive power: 11.5 / 8 kW Max. torque: 340 Nm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar capacity: 65 mm Max. chuck diameter: 250 mm Spindle nose: 170 h5 Number of tool stations: 12 positions Shank diameter DIN 69880: 30 mm Number of driven tool stations: 6 positions Speed range – driven tools: max. 4,500 rpm Drive power on driven tool stations: 5.5 kW X-axis travel: 255 mm Z-axis travel: 800 mm Tailstock quill travel: 680 mm Tailstock taper: MT 4 Clamping force: 6.8 kN Feed rate: 0 – 30,000 mm/min Rapid traverse (X / Y / Z): 30 / - / 30 m/min Feed force (X / Y / Z): 4.5 / - / 6.2 kN Total power requirement: 28 kW Machine weight: approx. 3.3 t Space requirements: approx. 5.0 x 2.5 x 2.3 m CNC universal lathe GILDEMEISTER - NEF 400 V3 - C-axis - Driven tools Nsdpsy E Tvvsfx Agxswf - Only approx. 8,093 spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI holders - incl. 8x tool holders - incl. 4x driven tools (2x radial, 2x axial)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stružno-rezkalni center s protivretencem z 10 CNC osmi (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Krmilnik: FANUC 31:iA Glavno vreteno Moč vretena: 15/11 kW Premer palice: 51 mm Vrtljaji vretena: 5.000 min⁻¹ Protivreteno Moč vretena: 11/7,5 kW Premer palice: 51 mm Vrtljaji vretena: 5.000 min⁻¹ Stružno-rezkalno vreteno Moč: 7,5/3,7 kW Vrtljaji: 12.000 min⁻¹ Maks. dolžina struženja spodnje revolverske glave: 1.005 mm Hodi suportov X1/X2/Z1/Z2/B2: 455 / 222,5 / 1.090 / 1.005 / 1.008 mm Nwedpfxey E Nz Io Agxof Hodi suportov Y1/Y2: ±70 / ±50 mm Zasuk osi B1: ±95 ° Linearni regalni magazin z vključenim podporno-robotom CNC podajalna luneta Hladilni ciklonski filtrirni sistem z 2 črpalkama hladilne tekočine Olajni hladilnik vretena

Stanje: rabljeno, Leto izdelave: 2009, premer struženja: 2.000 mm, potovalna razdalja osi X: 1.875 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 1.345 mm, največja hitrost vrtenja: 300 obr/min, vrtljajska hitrost (min.): 10 obr/min, Mazak Integrex e-1550 V 10 ll + PMC CNC vertikalni večoperacijski stroj CNC krmiljenje Mazatrol Matrix 2 Premer struženja 2000 mm Hitrost obračanja 10–300 vrt/min Vrtljaji rezkalne glave 25–5000 vrt/min Hodi osi X-Y-Z 1875-1550-1345 mm Nwedpjy Ey Tbofx Agxef Hod osi B -30/120° Indeksacija osi C 360/0,0001° Orodni priključek Capto C8 Za vsa vprašanja o stroju ali za dogovor o ogledu nas kontaktirajte po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled zaloge.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 16.093 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, največja hitrost vretena: 5.000 obr/min, model krmilnika: MITSUBISHI M-720BM (MAPPS 2), največja hitrost protivretena: 5.000 obr/min, največja hitrost rezkalne vretena: 12.000 obr/min, TECHNICAL DETAILS Turning length: 1,000 mm Nwjdpfxsy Eydye Agxef Main spindle Maximum spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Sub-spindle Maximum spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool interface: Capto C6 Tool positions: 100 stations Hollow clamping device: 67 mm MACHINE DETAILS Control: MITSUBISHI M-720BM (MAPPS 2) Hours of operation Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, ejection to the right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-coolant Coolant spray gun Blow air through sub-spindle Manual tool presetting in main spindle 3-color signal light Double foot switch Simultaneous 5-axis machining Automatic power-off Tool offset for 5-axis machining Programmable data input Dynamic exchange of diameter/radius Stroke check before movement

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Krmilna znamka: FANUC Model krmilja: 21T Globina stroja: 1850 mm Teža stroja: 3000 kg Največja dolžina struženja: 450 mm Največji premer nad suportom: 310 mm Nsdpfx Asy Eyazsgxjwf Največji premer nad ležiščem: 500 mm Luknja v vretenu: 77 mm Mesta orodij v revolverju: 12 kosov Pomik revolverja x / z: 200 / 450 mm Hitro pomikanje x / z: 24 / 30 m/min

Stanje: rabljeno, Leto izdelave: 2005, Zmogljivost Največji premer struženja: ≈ 300 do 400 mm Največja dolžina struženja: ≈ 600 do 1000 mm Preraz nad posteljo: ≈ 500 mm Vreteno Premer vretena: ≈ 65 mm (skladno z oznako UP65) Velikost vpenjalne glave: 200 do 250 mm Hitrost vretena: ≈ 3500 do 4500 vrt./min Moč vretena: ≈ 15 do 22 kW Nwjdpfx Agjy Ewkqexsf Osi Pomik X: ≈ 200 do 250 mm Pomik Z: ≈ 600 do 1000 mm Hitri pomik: X: ~20 m/min Z: ~24 m/min Konjiček Hidravlični konjiček Premer tulec: ~80 mm Hod tulec: ~100 do 150 mm Teža stroja Približno 4.500 do 6.500 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Mazak Integrex 35 stružno-rezalni center, Nwodpfsy Ev Rpjx Agxsf leto izdelave 1998, krmilnik Mazak T Plus, dolžina struženja 1500 mm, maks. premer struženja 575 mm, os Y, os B brezstopenjsko vrtljiva, verižni magazin za 40 orodij, nosilec za stružne alate KM 63, nosilec za rezkalne alate SK 40, konjiček, podporni prstan, transportni trak za ostružke, Kitagawa trivoščeljustna glava B 12,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Multicut 500i 5-axis turning center in very good condition. (X, Z¹, Z², C, B, Y axes). The machine was installed in September 2014 and has been regularly maintained. It is a very powerful and highly precise machine. Spindle on: approximately 13,700 hours, spindle operating hours: 4,500 Main technical data: CNC: Siemens 840D Swing diameter over bed: 1,030 mm Maximum turning diameter: 690 mm Turning length: 1,693 mm Y-axis travel: 370 mm Spindle bore: 106 mm Bar capacity through draw tube: 94 mm Spindle speed: 3,500 rpm Spindle motor S1/S6 40% duty cycle: 59/74 kW Milling spindle: 12,000 rpm Nodpey Evw Aefx Agxewf Milling spindle power S6 40% duty cycle: 22 kW Milling spindle taper: CAPTO C6 B-axis: -120º, +105º ATC magazine with 81 positions Linear scales in X, Z, Y Tailstock: Morse taper 6, stroke 180 mm Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m Machine weight: 22,800 kg Accessories: • Forkart power chuck type 3FNC with reversible hard jaws • Chip conveyor • Through-tool coolant 60 bar • Coolant gun • Automatic tool measurement • Automatic door opening • Servo-controlled hydraulic steady rest SMW type SR 5.1 (85 to 350 mmØ), automatic up/down movement

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 50.669 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 2.110 mm, premer struženja nad prečnim suportom: 725 mm, premer struženja: 570 mm, moč vretenovega motorja: 30.000 W, največja hitrost vretena: 2.000 obr/min, izvrtina vretena: 132 mm, potovalna razdalja osi X: 320 mm, pomik po osi Z: 2.200 mm, vrsta vhodnega toka: trifazni, Premer palice (maks.): 117 mm, premer tulec: 100 mm, premer nihanja nad prečno desko: 780 mm, skupna masa: 11.000 kg, Obráběcí centrum pro soustružení a frézování – HYUNDAI KIA SKT400LMC Stroj je v provozu a pod proudem. Stroj je vybaven vysoce kvalitní hydraulickou lunetou s rozsahem Ø30–Ø245 mm, včetně mnoha čelistí – cca 90 sad, z toho 10 zcela nových. Držáky nástrojů pro poháněné nástroje BMT75 – 2 radiální a 2 axiální, velké množství držáků pro statické nástroje. Dvourychlostní převodovka značky „BARUFFALDI“. Automatické dveře! Stroj je velmi přesný a stabilní. Technické údaje: Řídicí systém FANUC 21i-T Točný průměr 725 mm Průchod vřetenem 117 mm/132 mm Průměr sklíčidla 320 mm – Forkardt Maximální průměr obrábění 570 mm Maximální délka obrábění 2110 mm Výkon frézovacího motoru 7,5/5,5 kW Nodpfoy Equ Tox Agxswf Otáčky frézování 4000 ot./min Posuv pinoly koníku 2100 mm Průměr pinoly koníku 150 mm Zdvih pinoly koníku 150 mm Kužel pinoly koníku MT #5 – INTEGROVANÝ Počet pozic revolverové hlavy 12 stanic Rychloposuvy 20 m/min Výkon hlavního motoru 37/30 kW Upínací rozhraní vřetene A2-11 Otáčky vřetene 2000 ot./min Velikost nástroje 32 x 32 mm Typ nástrojového upínání BMT 75 C osa 0,001 stupeň Pojezd v ose X 320 mm Pojezd v ose Z 2200 mm Rozměry stroje 6340 x 2165 x 2228 mm Hmotnost stroje 11000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 205 mm, pomik osi Y: 105 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 828D, število osi: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multitasking operations, a 12-station turret with driven tools, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder, enabling efficient series production. If you are looking for high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill center we have for sale. Contact us for more details. • Key Features: • Main spindle + sub spindle • Y-axis for multitasking machining • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workpiece clamping capacity (on the machine): • Hydraulic 3-jaw chuck: 170 mm • Scope of delivery: • Transport to customer • Installation and commissioning of the machine • Basic operator training (14 hours) • Main advantages: • Y-axis + sub spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for series production • Automated parts handling → increased productivity Additional Equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20-50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet chuck system, capacity 5-65 mm • Chip conveyor (belt, side discharge) • Parts catcher for sub spindle • Oil skimmer • High-pressure coolant system (5-7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal beacon • Parts handling arm (for unloading the sub spindle) • Tooling package: Nedpey Epi Asfx Agxowf • 2x straight driven tool holders • 2x angled driven tool holders • 1x extended angle holder • 1x set of turning tool holders Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2016, Kontaktirajte za več informacij Nwjdpey Enr Sofx Agxof

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, skupna višina: 2.060 mm, skupna širina: 2.800 mm, skupna masa: 6.500 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 828D, največja dolžina izdelka: 3.450 mm, število osi: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for increased versatility. If you are seeking high-quality turning capabilities, the EMCO EMCOTURN E65 turn-mill center we have for sale is worth considering. Contact us for more details on this machine. • Working Area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt drive): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing diameter: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Sub spindle: • Speed: 60-5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid traverse speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Live tools (VDI30): • Speed: 0-5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed force X: 5000 N • Feed force Z: 7000 N Nwedpsy Enr Eofx Agxef • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • Main spindle with C-axis • Driven tools • Hydraulic tailstock • ShopTurn programming • USB and Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional Equipment • Bar loader: EMCO SL1200 • Bar diameter: 8-95 mm • Bar length: 150-1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, tangled chips, dry and wet machining • Coolant gun (Multiflow): • Adjustable nozzle + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper size: VDI 30 Counter spindle: Yes Driven tools: Yes

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 10.014 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00340000910, stružna dolžina: 1.290 mm, premer struženja: 640 mm, moč vretenovega motorja: 46.000 W, največja hitrost vretena: 2.000 obr/min, izvrtina vretena: 95 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 1.200 kg, sila podajanja os X: 9.500 N, podajalna sila osi Z: 15.500 N, Oprema: dokumentacija / priročnik, Tehnični podatki v prilogi. Nwsdoy Emx Rspfx Agxof

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Krmiljenje Mazatrol T-Plus Maks. premer struženja 470 mm Maks. premer nihanja 575 mm Dolžina struženja 1.500 mm Nwjdpfxsy Ehm Aj Agxsf Hitrost vretena 3.000 min-1 Magazin za 40 orodij (KM 63/SK 40) B-os Y-os Luneta Repati konjiček Transporter za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 5.002 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 424 mm, premer struženja: 370 mm, potovalna razdalja osi X: 380 mm, prehod palice: 52 mm, model krmilnika: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full-indexing capability: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Nwodpfey Edc Hex Agxsf Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotation speed: 6,000 rpm Driven tool drive power: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Through-hole chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub-spindle Spindle speed: 1,000 rpm BW-axis: 4 fixed positions, 0º, -30º, -180º (-225º for transfer to conveyor, if applicable) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating hours Power on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump External spindle air blower Foot switch (dual) for main and sub-spindle