Maschinen Marketing

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 850 mm, dolžina pomika po osi Y: 520 mm, dolžina podajanja os Z: 510 mm, Stroj je v dobrem tehničnem stanju. Hodi x, y, z: 850 x 520 x 510 mm Velikost mize: 1000 x 510 mm Maksimalna nosilnost mize: 500 kg Razdalja med vretenom in mizo: 150-660 mm Razdalja od ležišča do središča vretena: 585 mm Hitri pomiki x/y/z: 30/30/24 m/min Obseg hitrosti: 80-8000 obr/min (10k/12k/15k opcijsko) Stožec vretena: 40 BT / CAT Krmilni sistem: SINUMERIC Maks. premer orodja: 76 mm Bledpfox Akfyex Afqer Maks. dolžina orodja: 250 mm Maks. teža orodja: 7 kg Čas menjave orodja: 6 sekund Dvosmerni avtomatski menjalec orodij: 24 dvojna roka tip (20-32 opcijsko) Fiksni program navijanja Spiralna interpolacija Teža stroja: 5.500 kg Stroj vključuje transporter za odrezke. Ogled delovanja stroja je možen po predhodnem dogovoru.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F200 ECO Premium CNC milling machine, direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system sets itself apart through its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 duty cycle: 9 kW Drive motor torque S1 duty cycle: 57 Nm Drive motor S6 30% duty cycle: 17.1 kW Drive motor torque S6 30% duty cycle: 118 Nm Spindle taper: BT40 Coolant system Bjdpfx Afexyh Dboqjlr Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling precision Repeat accuracy: 0.008 mm Positioning accuracy: 0.004 mm Tool changer Type: Double arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse, X/Y/Z axes: 48 / 48 / 48 m/min Motor torque X / Y / Z axis: 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 - 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table length x width: 1000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg Features • Linear guides with precision ball screws for high rapid traverse speeds on all axes • Telescopic way covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 and 230 V power connection • Machine light in work area • Cleaning gun • THK ball screws and linear guides • Chip flushing • Spindle head cooling (machining area) • Electrical cabinet • Arm-type tool changer • SW24 • CE *More options available

Stanje: rabljeno, Leto izdelave: 2004, CNC-fræsemaskine PMER type DPM X-akse vandring: 780 mm Y-akse vandring: 410 mm Z-akse vandring: 550 mm Numerisk styring: ANILAM type 5000 M Konus: ISO 40 Spindeludgang: 120 mm (manuel) Spindelhastighed: 70 – 3800 O/min Bordstørrelse: 1270 x 320 mm Byggeår: 2004 Maks. afstand, spindelnæse til bord: 500 mm Min. afstand, spindelnæse til bord: 100 mm Svingbart hoved, højre/venstre Jog-håndhjul Mulighed for manuel bearbejdning (med håndhjul) eller CNC-drevet Bedoxxazcspfx Afqelr Smørepumpe Spænding: 380 V Bredde: 1900 mm Dybde: 2100 mm Totalhøjde: 2500 mm Vægt: 2,5 T

Stanje: rabljeno, Leto izdelave: 2002, CNC-Fräsmaschine PMER Typ S120 Verfahrwege X: 1.200 mm Verfahrwege Y: 630 mm Verfahrwege Z: 600 mm Numerische Steuerung: ANILAM 5300 (Defekter ANILAM-Bildschirm durch PC-Monitor und PC-Tastatur ersetzt) Werkzeugaufnahme: BT 40 Spindeldrehzahl: 50 bis 6.000 U/min Tischgröße: 1.600 x 500 mm Baujahr: 2002 Maximaler Abstand Spindelnase/Tisch: 730 mm Minimaler Abstand Spindelnase/Tisch: 130 mm Durchmesser Spindelhülse: Ø 150 mm Pneumatische Werkzeugspannung Zentralschmierung Schmierstoffpumpe Spannung: 380 V Bledpfoxxayljx Afqsr Breite: 2.300 mm Tiefe: 3.600 mm Gesamthöhe: 2.600 mm Gewicht: ca. 4,5 t

Stanje: rabljeno, Leto izdelave: 2017, x-Hod: 750 mm y-Hod: 650 mm z-Hod: 560 mm Upravljanje: 3D HEIDENHAIN TNC 640 Veličina stola: 800 x 650 mm Rotacioni sto: 650 mm Nosivost stola: 600 kg c-os: ° b-os: -120+120° Prečnik alata: 840 mm Maksimalna visina alata: 500 mm Brzi hod: 40.000 mm/min Broj obrtaja: 20.000 o/min Prihvat: HSK-A63 Obrtni moment: 130/86 Nm Snaga motora: 35 kW Bodexwzftepfx Afqelr Unutrašnje hlađenje, dovod: 40 bar Radni sati uključivanja: 26.972 h Radni sati vretena: 11.412 h Magacin alata: 60 pozicija Unutrašnje hlađenje, dovod: 40 bar Ukupna potrebna snaga: 49 kW Težina mašine: cca. 11.600 kg Polovna 5-osna obradački centar DMG-Mori DMU 75 MonoBlock Godina proizvodnje: 2017 -Rezervoar sa papir filterom 500 l -Aktivni rashladni ormar -Heidenhain infracrveni merni sonda -Blum laserski merni uređaj -Uređaj za usisavanje strugotine -Pištolj za čišćenje sa pumpom 2 bar 40 l/min -3D-3D Quick Set -HEIDENHAIN HR-510 prenosivi ručni upravljač *Moguće razgledanje pod naponom, u besprekornom stanju

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 17.260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel distances X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Bodpfxjxtu H Ne Afqjlr Distance between vertical spindle nose and table: 130 – 550 mm Table load: max. 500 kg Speed range: 50 - 4000 rpm Feed range, stepless: 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Swiveling vertical milling head: ± 90° Manual quill adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC path control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24/RS 232 • Swiveling vertical milling head ± 90° right+left with quill adjustment • Hydraulic tool clamping vertical + horizontal ISO 40 • Swiveling device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation due to stable, heavily ribbed cast iron guides • Ball screw drives for X, Y, and Z axes • All electrical control elements on one side, in the movable control panel • Fixed angle table with folding chip guard • Coolant system in machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Fig.: Shows brochure image Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, Leto izdelave: 1997, dolžina podajanja os X: 900 mm, dolžina pomika po osi Y: 450 mm, dolžina podajanja os Z: 400 mm, Pomiki X/Y/Z: 900/450/400 mm Površina mize: 1120x400 mm Največja obremenitev mize: 600 kg Vreteno stožec: ISO 50 Skupni vhod moči: 20 kVA Skupne dimenzije stroja (D x Š x V): 2560 x 3280 x 3355 mm Skupna teža stroja: 4550 kg Bjdpoxtaxdsfx Afqolr Krmilni sistem: Heidenhain TNC 415 Stroj vključuje naslednjo opremo: 4. os, primež, nosilec orodja, vpenjalne tule, sonda, navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 1986, CNC universal milling machine Manufacturer: DECKEL, Model: FP5NC, Year: 1986, Control: DIALOG 4 Travel distances: X 710 mm / Y 600 mm / Z 500 mm Bljdpfx Aexr A A Ajfqor Clamping table: 1000 mm x 550 mm Tool holder: SK40 Feed rate programmable: 2 ... 3600 mm/min Spindle speed: 18 ... 6300 rpm Spindle power: 7.5 kW Machine in stock.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2010, Funkcionalnost: nefunkcionalno, številka stroja/vozila: M-075.068.10, dolžina podajanja os X: 750 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 640 mm, največja hitrost vretena: 12.000 obr/min, hitrost vretena (min.): 50 obr/min, širina mize: 520 mm, dolžina mize: 900 mm, CNC rezkalni stroj Emco MC 75/50 Št. stroja: M-075.068.10 Leto izdelave: 2010 vključno z 30 vpenjali orodij SK40 z vlečnimi vijaki vključno s 4. rotacijsko osjo vključno z različnimi orodji in vpenjali vključno s koncentratom hladilne tekočine Bsdpfxjxn Hy Re Afqolr POZOR: Stroj se prodaja kot potreben popravila. Krmiljenje stroja je poškodovano: Heidenhain MC420 vključno z dokumentacijo in navodili za uporabo brez garancije in jamstva

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, CNC univerzalni rezkalni in vrtalni stroj DECKEL MAHO DMU 80 P duoBlock Z vodenjem poti MILL PLUS iT Letnik: 2006 Pomiki: X 800 Y 800 Z 800 Območje vrtljajev: 0 – 8.000 min⁻¹ brezstopenjsko (SK 50) Z naslednjo opremo: NC okrogla miza 900 mm x 700 mm vpenjalna površina (max. obremenitev mize 1,4 t) Univerzalna rezkalna glava z gnano osjo B Univerzalni menjalec orodij z 40 mesti v magazinu, dvojni grabilnik (SK 50) Polna zaščitna kabina z drsnimi vrati in notranjo osvetlitvijo IKZ – 40 bar Transporter za ostružke Rotoclear 3D merilna tipala Heidenhain TS 641 Način delovanja 3 + 4 Elektronski ročni kolešček 50 kosov držal orodij SK 50 Bjdpfx Aexn Aczjfqolr 3 kos nastavljive strojne noge po višini Transportna oprema Navodila za uporabo

Stanje: nepreverjeno (rabljeno), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine by JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideally suited for precise milling tasks on workpieces up to 700 kg including clamping device. --- Technical Specifications - Travel X/Y/Z: 800 × 500 × 500 mm - Table working area: 500 × 1,400 mm - Number of T-slots: 7 - Slot width: 18 mm - Slot pitch: 63 mm - Max. longitudinal table travel: 800 mm - Max. vertical knee travel: 500 mm - Max. cross slide travel (ram): 500 mm Bljdpfx Afexk Tzgoqer - Feed rate range: stepless 0–4,000 mm/min - Spindle taper: ISO 50 - Head swivel angle: ±45° - Distance spindle axis to vertical guides: max. 590/90 mm - Spindle speed: 56–1,800 rpm - Rapid traverse: 4,000 mm/min - Spindle drive motor power: 5.5 kW - Operating voltage: 380 V, control voltage 24 V - Total power consumption: 10 kW - Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm - Total weight incl. hydraulic unit: 4.5 t --- Equipment & Features - Vertical, swiveling milling spindle on cross-adjustable ram - Hydromechanical tool clamping system - Separate feed drives with DC motors and permanent magnets - Transmission via toothed belts driving preloaded ball screws - Automatic lubrication system for spindle drive and guideways - Hydraulic counterweight for the knee - Manual adjustment via electronic handwheel - Heidenhain control system on swiveling control panel, control cabinet mounted on machine base - Including documentation and operating manual - Additional photos and videos available on request --- The machine is immediately available for use. - Inspection possible at any time - Europe-wide transport possible --- Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and error.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.200 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Gre za robotsko celico, ki je bila prvotno uporabljena za upravljanje dveh strojev Hermle C40U. Blodjw Sdc Sjpfx Afqjr Prodaja se le robotska celica brez strojev. Idealno za nadgradnjo avtomatizacije na obstoječe stroje ali kot vir rezervnih delov. - Leto izdelave: 2008, Kuka robot KR210-2 2000, največja nosilnost palete 200 kg - Krmiljenje KRC 2 - Prilagojeno za rokovanje s paletami – ni za rokovanje s posameznimi deli - Regal z 51 mesti za palete - Postaja za pripravo - Prilagojeno za dve stroji - Obseg naprave: robotska celica s KUKA robotom, krmiljenjem in KPC2 panelom, 16 ustreznih palet in pločevine za prilagoditev strojem Zelo dobro ohranjeno stanje. Robot je bil do demontaže popolnoma delujoč. Opomba: Robotska celica je na voljo takoj.

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, 1 rabljena: Univerzalni rezkalni stroj, rabljen • Proizvajalec: Klopp • Model: FW 11/4 • Leto izdelave: neznano, cca 1970 • Vpenjalna površina mize: 1100 x 300 mm • Vpenjalno vreteno: SK 40 • Glava za rezkanje nastavljiva: 2x 110° • Hitrosti vretena: 40/80/120/240/480/960 obr/min Bjdpfxjw R T A Ej Afqslr • Pomiki: 12-340 mm/min Pribor: različna vpenjala in rezkalniki, 1 komplet vpenjalnih puš Hidravlični primež s pnevmatskimi podporami Širina čeljusti primeža: 160 mm

Stanje: rabljeno, Univerzalni orodni rezkalni stroj Znamka: OPTIMUM Model: MT 100 Bedpfxsw Rlvqs Afqelr Leto izdelave: 2018 – delavniško preizkušen Št. stroja: J33021808035 Geometrijsko prevzemanje s preizkusnim protokolom Oprema: - 3-osni digitalni prikaz DPA 2000 - Vertikalna rezkalna glava SK 40 z navojem M 16 - Fiksna miza 1.120 x 260 mm (T-utor: 14 mm) - Strojna luč - Naprava za hlajenje - Ročno centralno mazanje - Navodila za uporabo Rabljeno kot vidno, brez garancije. Stroj je tehnično ustrezen stanju iz leta izdelave.

Stanje: rabljeno, Leto izdelave: 1989, x-travel 750 mm y-travel 270 mm z-travel 300 mm Table size 900 x 350 mm Spindle mount ISO 40 Spindle speeds 18–1600 rpm Operating hours 2543 h 3-axis Heidenhain digital readout Total power requirement 10 kW Machine weight approx. 1570 kg Space required approx. 2.60 x 3.80 x 2.35 m Bljdew Hlzgspfx Afqsr Universal milling machine Berlett FE1-10, year of manufacture 1989 Very robust tool milling machine with extensive accessories. Various machine vises. Manual rotary table Various tool holders and cutters Coolant tank Fully equipped tool cabinet with cutters, etc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 27.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M342-06207026DHA, potovalna razdalja osi X: 760 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, širina mize: 1.020 mm, dolžina mize: 510 mm, TECHNICAL DETAILS Travel paths X-axis travel: 760 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table Clamping surface: 1,020 x 510 mm Spindle Speed range: 10 – 10,000 rpm Taper Spindle taper: SK 40 DIN 69871 Number of tool stations: 24 Control: Ultimax 4 MACHINE DETAILS Bljdpjw Eih Isfx Afqjr Electrical data Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Operating hours: 27,500 hours Dimensions & Weight Dimensions: 3,900 x 4,100 x 2,800 mm Weight: 2,900 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, The machine is on display and has only been used for demonstration purposes. Optimill F 150 HSC Premium CNC milling machine direct from the manufacturer. F 150 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Dimensions and Weights Length approx. 3,000 mm Width/Depth approx. 1,950 mm Height approx. 2,310 mm Weight approx. 4,350 kg Drilling/Milling Capability Max. face mill diameter: 63 mm Max. end mill diameter: 32 mm Rapid Traverse Speed X-axis: 36,000 mm/min Y-axis: 36,000 mm/min Z-axis: 36,000 mm/min Electrical Data Supply Voltage: 400 V Mains Frequency: 50 Hz Electrical Connection Total Connected Load: 31 kVA Horizontal Milling Table Length: 900 mm Width: 410 mm Overhang: 480 mm Vertical Spindle to Table Min.: 102 mm Vertical Spindle to Table Max.: 562 mm T-slot size: 16 mm Number of T-slots: 4 T-slot spacing: 102 mm Max. load: 350 kg Precision Repeatability: ± 0.005 mm Positioning Accuracy: ± 0.005 mm Coolant System Number of Coolant Pumps: 3 Coolant Pump Motor Power per Unit: 1.27 kW Tank Volume: 210 l Flow Rate: 66 – 100 l/min Pneumatic Connection Operating Pressure: 5 – 7 bar Control Type: Sinumerik 828D System Software: SW 28x CNC Memory: 8 MB Block Change Time: 1 ms Look Ahead: 150 Number of Tools: 512 Travel X-axis Automatic: 760 mm Y-axis Automatic: 440 mm Z-axis Automatic: 460 mm Vertical Spindle Spindle Taper: SK 40 DIN 69871 Speed Range: 12,000 rpm Spindle Drive Motor Power S1 Continuous Duty: 9 kW Spindle Drive Motor Power S6-30% Duty: 21.2 kW Spindle Drive Motor Torque S1 Continuous Duty: 57 Nm Spindle Drive Motor Torque S6-30% Duty: 135 Nm Feed Force Feed Force X-Axis: 3.0 kN Feed Force Y-Axis: 5.5 kN Feed Force Z-Axis: 5.5 kN Feed Motor Torque X-Axis S1 Continuous Duty: 7.3 Nm Y-Axis S1 Continuous Duty: 10.5 Nm Z-Axis S1 Continuous Duty: 15 Nm Tool Changer Type: Double arm gripper Bledpfx Afjw Ea Ixeqor Number of Tool Stations: 24 tools Max. Tool Diameter (adjacent slots free): 125 mm Max. Tool Diameter: 80 mm Max. Tool Length: 200 mm Max. Tool Weight: 8 kg Included Options: • PPU 290 Touch Panel • 12,000 rpm Inline Spindle • Screw-Type Chip Conveyor • 70 Bar External Through-Spindle Coolant (IKZ)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D controller offers outstanding performance, speed, precision, and long service life. • Heavy-duty design • High productivity • Exceptional reliability • Strongly ribbed, torsion-resistant machine base • Profile rails with roller bearings on all axes for high load capacity • High-torque servo drives directly connected to the ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes • Telescopic way covers on all three axes • Main spindle SK40 with speeds up to 15,000 rpm, inline spindle • Heavy-duty, precision-ground milling table with five T-slots, large dimensions • Portable electronic handwheel with enabling button and emergency stop switch simplifies program setup • Tool changer with arm gripper, 30 tool positions • Coolant system with chip flushing and cleaning gun • Internal spindle coolant at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Workspace LED lighting • SIEMENS extended warranty package and free online/on-site OSS Plus service • 1-year Basic maintenance contract for DE/AT/CH included Control: • 15.6" color display • 16:9 format Complete Package: • Safety Integrated • Residual material detection and processing • ShopMill process programming • Network drive management Blodpjw Ea Ifsfx Afqer • 3D simulation • Path recording Additional Siemens OSS PLUS package: • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Equipment Details: Inline spindle: • SK40 / DIN 69871 taper • Spindle speed up to 15,000 rpm Dimensions and weights: • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed: • X-axis: 36 m/min • Y-axis: 36 m/min • Z-axis: 32 m/min Electrical data: • Connection voltage: 400 V • Mains frequency: 50 Hz • Total connected load: 30 kVA Horizontal milling table: • Length: 1200 mm • Width: 600 mm • T-slot size: 18 mm • Number of T-slots: 5 • T-slot spacing: 100 mm • Maximum load: 800 kg Accuracy: • Repeatability: ± 0.005 mm • Positioning accuracy: ± 0.005 mm Travel: • X-axis (automatic): 1000 mm • Y-axis (automatic): 620 mm • Z-axis (automatic): 630 mm Vertical spindle: • Spindle taper: SK40 DIN 69871 • Speed range: 15,000 rpm • Drive motor power S1 (continuous): 20 kW • Drive motor power S6-30% duty cycle: 52.4 kW • Drive motor torque S1: 96 Nm • Drive motor torque S6-30%: 250 Nm Feed force: • X-axis: 6.68 kN • Y-axis: 6.68 kN • Z-axis: 12.01 kN Feed motor torque: • X-axis (S1): 20 Nm • Y-axis (S1): 20 Nm • Z-axis (S1): 36 Nm Tool changer: • Double-arm gripper • Number of tool positions: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool change time (tool to tool): 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The machine is currently on display and has only been used for demonstration purposes. Optimill F 150 E CNC milling machine, directly from the manufacturer. F 150 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. Bjdsw Ea Dgopfx Afqslr - Carousel tool changer with 16 tool positions - All linear guides with stainless steel covers - Central automatic lubrication system - Siemens main spindle motor - SIEMENS servo drives on all axes (closed loop) - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - Maximum spindle speed: 10,000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency stop switch—significantly simplifies program setup - Coolant system with 190-liter coolant tank - Tool change is automatic or triggered at the push of a button - Heavy, precisely machined and large-scale milling table - Large access doors designed to minimize cleaning and maintenance time - “SINUMERIK 808D on PC” software package included. (Practical training software allowing for offline programming and simulation of workpieces on PC. The software can be downloaded free of charge.) SINUMERIK 808 ADVANCED – CNC technology from the market leader, combined with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control system. This compact and user-friendly entry-level solution is designed for simple milling applications. Features such as intuitive operation, commissioning, and easy maintenance make it the ideal basis for equipping CNC machines. Through its technology-specific configuration, the SINUMERIK 808D ADVANCED is perfectly preconfigured for milling. Thanks to hardware and software extensions, it provides sufficient performance for basic milling functions in mold and tool making. Compact and robust Thanks to its panel-based CNC design with minimal interfaces and an IP65-rated control panel, the SINUMERIK 808D ADVANCED is perfectly suited for use in harsh environments. Its compact dimensions enable installation in smaller machines. INCLUDED: - RJ45 Ethernet port - 8.4” LCD color display with 800 x 600 resolution - Prepared for remote maintenance - AST function: allows for easy optimization in tasks requiring greater dynamics and accuracy - Absolute encoder / No reference run required - Higher precision Travel distances: X = 750 mm Y = 500 mm Z = 500 mm Dimensions and weights: Length approx. 3,420 mm Width/Depth approx. 2,050 mm Height approx. 2,400 mm Weight approx. 4,500 kg Drilling/Milling performance: Maximum face mill diameter: 80 mm Maximum shank cutter diameter: 38 mm Electrical data: Supply voltage: 400 V Mains frequency: 50 Hz Total connected load: 15 kW Horizontal milling table: Length: 900 mm Width: 500 mm Vertical spindle – table distance min.: 100 mm Vertical spindle – table distance max.: 600 mm T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 80 mm Maximum table load: 350 kg Accuracy: Repeatability: ±0.005 mm Positioning accuracy: ±0.01 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 200 HSC Premium CNC milling machine, direct from the manufacturer. F 200 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty construction - High productivity - High reliability - Strongly ribbed, torsion-free machine base - Linear guide with recirculating rollers for high rapid traverse speeds on all axes - Powerful servo drives on all three axes - Telescopic guideway covers on all three axes - Automatic lubrication - Robust, precision-ground milling table with five T-slots, generously dimensioned and ground to high accuracy - Portable electronic handwheel with enable button and emergency stop facilitates program setup significantly - Coolant system with chip flushing and cleaning gun - Through-spindle cooling with 20 bar pressure - Belt-type chip conveyor for efficient chip removal - Chip cart - RJ45 connection and 230 V power supply - Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dust particles - Machine light in the work area - SIEMENS supplementary package with material defect liability and free OSS Plus online/on-site service - 1-year Basic maintenance contract included in Germany/Austria/Switzerland Milling Spindle Inline spindle Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Torque of drive motor S1 operation: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque of drive motor S6-30% operation: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Coolant pump output, 3 units: 1 kW Delivery rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent empty slots): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drives Bsdpfx Asw Ea Avsfqslr Rapid traverse X, Y, Z axis: 48 m/min Drive torque motor X/Y/Z: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z: 5.34 kN / 5.34 kN / 6.68 kN Speed range Spindle speed: 12,000 rpm Pneumatics Air pressure: 6 – 8 bar Air consumption per hour: 6 – 8 kg/m³ Milling table Spindle-to-table distance: 100 – 650 mm Table size (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 7.921 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 637, potovalna razdalja osi X: 754 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, TECHNICAL DETAILS Number of axes: 3 Travel X: 754 mm Travel Y: 500 mm Travel Z: 500 mm Max. spindle speed: 10,000 rpm Table size (length): 1,000 mm Table size (width): 500 mm Control type: Heidenhain iTNC 530 Control system: CNC Interface: ISO40 MACHINE DETAILS Dimensions & Weight Weight: 4,000 kg Dimensions: 2,600 mm x 2,350 mm x 2,560 mm Transport packages: 3 units EQUIPMENT Documentation available CE marking available Bledpfx Aowyv Tmjfqjr

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, x-slag 710 mm y-slag 600 mm z-slag 500 mm Bledpfxewu Dfmj Afqor NC-draaitafel 630 mm Spilopname SK 40 Spilsnelheden 18 - 6300 rpm DIALOG 4 besturing Voedingssnelheid 2 - 3600 mm/min Snelle traverse 6 m/min Maximale tafelbelasting 485 kg Zwenkslag 80 mm Spindelmotor 9,5 kW Totaal benodigd vermogen 20 kVA Machinegewicht ca. 4,6 ton Afmetingen (L x B x H) 3,8 x 2,24 x 2,35 m Accessoires: LNS Fox ws 2-1500 filtersysteem met 2 nieuwe filters in doos, 2 kasten vol gereedschap Deze machine is bij ons in opslag.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 77533, dolžina podajanja os X: 700 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 600 mm, največja hitrost vretena: 6.300 obr/min, pomik vretena: 80 mm, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Spindle stroke: 80 mm Spindle speed: 20 - 6,300 rpm Feed rate: 1 - 4,000 mm/min X and Z rapid traverse: 12 m/min Blsdpfx Ajwtq T Uofqsr Y rapid traverse: 10 m/min Accuracy: 0.001 mm

Stanje: zelo dobro (rabljeno), Year of manufacture: 2002 Overhaul: 2010 Model: CNC 607GK Control system: Eckelmann (PC control) Operating hours: 14,136 h Table size: 718 x 680 mm Travel distances (X-Y-Z): 780 – 620 – 360 mm Spindle interface: HSK 63F Spindle speed: up to 24,000 rpm Feed rate: up to 8,000 mm/min Accessories: spindle cooling Condition: good Suitability: The machine is particularly suitable for light machining operations, aluminum, as well as wood processing Bjdpfx Ajwhwwiefqslr Connection: 20 kW Machine dimensions: 1,700 x 3,000 x 2,500 mm Weight: 1.6 t

Stanje: dober (rabljeno), X 800 mm Y 400 mm Bledpfxewa Naao Afqer Z 500 mm