AGICOM - Pedergnana OG

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 90 kW (122,37 KM), lastna masa: 36.500 kg, skupna širina: 2.400 mm, skupna dolžina: 9.500 mm, skupna masa: 40.000 kg, dolžina rezanja (maks.): 1.600 mm, leto zadnje generalne obnove: 2024, vrsta vhodnega toka: trifazni, obratovalni tlak: 220 letvica, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 600 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is intended for cost-effective scrap cutting: - Simple automatic operation - Energy-saving Kdjdpfxox Tp H Hj Af Tog - Cost-efficient - No foundation required Function: Scrap is loaded into the feed area using an excavator. Thanks to the horizontal feed hopper and the scrap’s own weight, the material drops into the loading chamber and subsequently into the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool holder, which pushes the scrap across the front knives. As the tool carriage moves horizontally, the processed material is pushed out through the knives on the front of the container. When the carriage returns to the rear position, additional scrap moves into the machine chamber by gravity. Scrap shears are available in different configurations upon customer request, and the output size can be selected (for new orders). Inspection and a test run are possible.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Novi škarjasti rezili, na primer za Lindemann LU 1010 Kdjdpjx R Ud Eofx Af Tog Mere: 200x80x524, deljena izvedba (glej risbo) Na voljo 8 kosov / 2 kompleta Cena za kos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 2.852 h, Funkcionalnost: popolnoma funkcionalen, Na prodaj je mobilna škarja za staro železo, Akros Henschel. Stanje stroja je zelo dobro in si ga je mogoče ogledati kadarkoli. Kdedox N Tw Uepfx Af Tog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 19.000 h, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 500 t, Sierra T 500 R mobilna na prodajo Pripravljena za uporabo in na voljo Nov motor je bil vgrajen pred 5 leti Kdodpfx Afjx Ih N No Tog

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, Na prodaj je mobilna škarja za staro železo Lefort. Stroj je v zelo dobrem stanju in si ga je mogoče kadarkoli ogledati. Kdsdpfx Afsx Elyae Tsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 49.000 kg, NAPRODAJ STROJ LEFORT (ŠKARJE) V ZELO DOBREM STANJU, PRIPRAVLJEN ZA UPORABO. Kodpfx Asx A Ugnof Tedg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 6.500 h, Prodaja se škarje za odpad v zelo dobrem stanju. Stroj si je mogoče ogledati kadarkoli. Kdedpfx Asxnavxjf Tjg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R40410, rezalna sila: 900 t, moč: 371,43 kW (505,00 KM), lastna masa: 75.000 kg, Premična dizelska škarjasta stiskalnica COPEX model REFLEX 900 ton (leto 2023). Servis opravljen pri proizvajalcu. Zmogljivost: 10 do 22 t/h glede na vrsto odpadkov za rezanje. Na voljo takoj. Ksdpfoxg Ekfjx Af Tedg

Stanje: pripravljen za uporabo (rabljen), obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 36290, rezalna sila: 650 t, skupna masa: 62.080 kg, dolžina mize: 6.000 mm, širina mize: 2.500 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNE PODROBNOSTI Moč in sile Škarjna sila: 650 t Poraba energije: 200 kW Delovno območje Dolžina komore: 6.000 mm Širina zaprte komore: 781 mm Dimenzije nakladalne mize: 6.000 x 2.500 mm PODROBNOSTI O STROJU Teža skupaj z mizo: 62.080 kg Delovne ure: 8.000 Kdsdpfx Afjw Nv Dis Tjg Opomba: Stroj bo na voljo od 01.03.2026.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 12.450 h, številka stroja/vozila: 1231, Lefort škarje-stiskalnica 330 Reže jeklo in balira material zelo dobro stanje, priložen daljinski upravljalnik Kodpfxsv I Utvs Af Tsdg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, obratovalne ure: 4.251 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 643, Gute Maschine in einwandfreiem Zustand, sofort einsatzbereit! Kedpfxov Dq Dvj Af Tsdg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 586, MODEL – C/A4 SCIVOLO 70 Kdodpfx Aju Nvhzof Tsg YEAR OF MANUFACTURE – 2006 CHASSIS NUMBER – 586 ENGINE TYPE – DIESEL

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 3.500 h, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 90 kW (122,37 KM), lastna masa: 36.500 kg, skupna širina: 2.400 mm, skupna dolžina: 9.500 mm, skupna masa: 40.000 kg, dolžina rezanja (maks.): 1.600 mm, leto zadnje generalne obnove: 2024, vrsta vhodnega toka: trifazni, obratovalni tlak: 220 letvica, Scrap Shear MS-6300e (Scrap shear with electric motor) without operating fluids. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12-17 t/h Ksdpjuu Upgjfx Af Tedg Machine weight: 40 t (+ diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy saving - Cost saving - No foundation required Function: Scrap is loaded into the feed area with the help of an excavator. Through the horizontal feed area and due to the self-weight of the scrap, it falls down into the loading chamber and the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool holder side pressing it over the knives at the end wall. As the tool carriage moves horizontally, the processed material is discharged over the knives at the container front wall. When returning to the rear position, the loaded scrap, due to its own weight, moves further into the shear. Scrap shears are available in various configurations according to customer requirements and the output size can be selected (for new orders). Inspection and test operation are possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 16.800 h, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 600 t, moč: 242,71 kW (329,99 KM), Lefort mobilni 600 ton Sila rezanja: 600 t Sila pritiska: 120 t Potisna sila: 180 t Sila zapiranja pokrova: 240 t Višina zaboja: 600 mm Širina zaboja: 800 mm Globina zaboja: 6000 mm Na voljo takoj Kdodpfeuptrpex Af Tsg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 700 t, moč: 300 kW (407,89 KM), lastna masa: 115.000 kg, skupna širina: 3.000 mm, skupna dolžina: 17.000 mm, skupna višina: 4.000 mm, skupna masa: 91.000 kg, dolžina rezanja (maks.): 7.100 mm, leto zadnje generalne obnove: 2024, pritisk: 360 letvica, Taurus K773.L1E Shearing force: 700 tons Shearing width: 950 mm (blade 1000 mm) Shearing height: 650 mm Box length: 7100 mm Pusher force: 900 kN Central lubrication system included Drive power: 300 kW Overhauled in 2024 (Year of manufacture: 2006) Overhaul includes the following work: - Replacement of HARDOX slide guides - Replacement of carbon guides on the blade carriage - Installation of new upper/lower blade seats - Installation of new blades and bolts upper/lower Ksdpfxeuptmyo Af Todg - Welding of worn areas in the shear mouth - Dismantling of both covers, fitting new hinges, installing new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing of the valves at the left/right valve bank - Installation of new feed cylinder rod (180 x 8.29 m) - Installation of new feed guide bushings including seal kit - Hardfacing and re-machining of the feed block and hold-down - Inspection of side cylinders, partial installation of new seal kits as required - Replacement of piston rods and honing of tubes as needed - General repair work on hydraulic pipes and clamps as required - Replacement of damaged hoses - General repair work on the structure, covers, and platform construction - New paintwork of the unit - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with new paintwork.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 110 kW (149,56 KM), skupna širina: 2.400 mm, skupna dolžina: 9.400 mm, skupna višina: 3.800 mm, skupna masa: 50.000 kg, dolžina rezanja (maks.): 1.600 mm, vrsta vhodnega toka: trifazni, Scrap Shear MS-6300mex (Mobile Scrap Shear with Electric Motor) A 250kW diesel generator can be offered separately. Model: MS-6300mex Cutting force: 630 t Kodpfxor Ihzis Af Tedg Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 8–15 t/h Machine weight: 50 t (+ diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-efficient - No foundation required The scrap shear is capable of cutting almost all types of scrap material. Note: The machine is not recommended for cutting high-carbon steel, such as: axles, wire ropes, pig iron, spring steel plates, rails, alloy steel, hubs, etc. (These hard materials will damage the cutting blades) Function: Scrap is loaded into the feed area with an excavator. Due to the horizontal feed area and the scrap’s own weight, it falls down into the loading chamber and cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carrier over the blades mounted at the front wall. As the tool carrier moves horizontally, the processed material is extruded over the blades at the front of the container. When returning to the rear position, the loaded scrap moves into the shear under its own weight. Scrap shears are available in various configurations according to customer requirements, and the output size can be selected (for new orders). Inspection and trial operation are possible.

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: omejena funkcionalnost, rezalna sila: 800 t, lastna masa: 190.000 kg, vrsta vhodnega toka: trifazni, Arnold HS850 Presse à ferraille et métaux La machine est actuellement prête pour le transport. Vérin principal Force du vérin : 850 t Vitesse de pressage : 0,08 m/s Vérin de maintien Force du vérin : 100 t par vérin Vérin d’avance : Force du vérin : 100 t Vérin de couvercle : Force du vérin : 100 t Dimensions principales Longueur totale : 16 175 mm Largeur totale : 5 200 mm Hauteur totale : 6 420 mm Dimensions de passage : Kjdpfjh T Dctox Af Tsdg Largeur de passage au poste de cisaillement : 800 mm Hauteur de passage au poste de cisaillement : 800 mm Hauteur totale : 6 000 mm Poids : Poste de cisaillement avec poutre porte-lames : 60 t Unité d’avance env. : 85 t Poids total : env. 170 t Volume d’huile nécessaire : 5 200 litres Puissance de raccordement de la machine : 220 kW Si vous avez besoin de plus d’informations, nous sommes à votre disposition ! Veuillez nous contacter via le formulaire de contact ou appelez-nous. Votre annonce a été traduite automatiquement. Des erreurs de traduction sont possibles.

Stanje: novo, Leto izdelave: 2025, - Cutting force: 1,600 tons - Capacity: up to 70 tons per hour - Side compression force: 2 x 220 tons - Clamp pressure: 250 tons - Motor: 480 kW - Machine weight: 150,000 kg - PLC controlled - Remote control available - Adjustable output length Kodegv Acujpfx Af Todg

Stanje: novo, Leto izdelave: 2025, - Shearing force: 1,350 tons - Capacity: up to 50 tons per hour - Side compression force: 2 x 180 tons Ksdegv Abpepfx Af Tjdg - Clamp pressing force: 250 tons - Motor: 396 kW - Machine weight: 120,000 kg - PLC controlled - Remote control available - Adjustable output length

Stanje: novo, Leto izdelave: 2025, - Cutting force: 900 tons - Capacity: up to 25 tons per hour - Side compression force: 2 x 120 tons - Clamp pressure force: 160 tons - Motor: 220 kW - Machine weight: 78,000 kg - PLC controlled - Remote control available - Adjustable discharge length Kjdpfsgv Aa Iox Af Tjdg

Stanje: novo, Leto izdelave: 2025, - Cutting force: 700 tons - Capacity: up to 20 tons per hour - Side compression force: 2 x 85 tons - Clamping force: 100 tons - Motor: 160 kW - Machine weight: 55,000 kg - PLC controlled Kdedpfegv Aacex Af Tog - Remote control available - Adjustable output length

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SHK2019-11, rezalna sila: 100 t, skupna širina: 820 mm, skupna dolžina: 1.650 mm, skupna višina: 1.600 mm, skupna masa: 1.250 kg, dolžina rezanja (maks.): 400 mm, pritisk: 160 letvica, MIZAR ALS A1 je zasnovan za hidravlično rezanje odpadnih kablov in kovin. Površina hidravličnih batnih gredi je indukcijsko kaljena in kromirana za dolgotrajno vzdržljivost. MIZAR ALS A1 je opremljen z rezili iz posebej obdelanega orodnega jekla ter hidravlično enoto Bosch Rexroth. Vse električne in elektronske komponente so blagovne znamke Siemens. Naši izdelki so izdelani in certificirani v skladu s standardi CE in EAC. Kjdsd Exv Hepfx Af Tsdg

Leto izdelave: 2024, Stanje: novo, - Cutting force: 1,100 tons Kdodpfx Ajdfcpasf Tsg - Capacity: up to 50 tons per hour - Side compression force: 2 x 120 tons - Clamp pressure force: 160 tons - Motor: 264 kW - Machine weight: 85,000 kg - PLC controlled - Remote control available - Discharge length adjustable

Stanje: novo, Leto izdelave: 2025, • Shearing force: 700 t • Holding clamp force: 120 t • Box closing force: 240 t Kedpfjdd Tp Rjx Af Tjdg • Pusher ram force: 150 t • Cutting width: 800 mm • Box length: 6000 mm • Box width (open): 2550 mm • Box width (closed): 800x600 mm • Electric power: 2 x 90 kW • Maximum operating pressure: 315 bar • Capacity: 15 - 20 t/h (iron/steel) • Shearing capacity: 12 - 16 t/h (iron/steel) • Weight: 70,000 kg