Zylinderschleifwerk / Mechanische Werkstatt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, največja hitrost vretena: 4.000 obr/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 124, število osi: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a SK40 spindle taper. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse speeds of up to 1,000 mm/min on all axes. Take the opportunity to purchase this KUNZMANN universal machining center WF 4/3. Contact us for further details on this machine. • Swiveling head: ±90° • Spindle and drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: Kledpfx Aoya D Svef Nsl • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Line filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, največja hitrost vretena: 18.000 obr/min, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Heidenhain iTNC 530, število mest v zalogovniku orodij: 40, število osi: 5, Ta 5-osni HERMLE C40U je bil izdelan leta 2009. Gre za univerzalni obdelovalni center s 5-osno simultano obdelavo, največjo hitrostjo vretena 18.000 vrt/min ter orodnim magazinom za 40 orodij. Pomik osi X znaša približno 850 mm, osi Y 700 mm in osi Z 500 mm. Razmislite o nakupu tega univerzalnega obdelovalnega centra HERMLE C40U. Za več informacij nas kontaktirajte. Kljdpfx Ajya D D Sjf Nel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 620 mm, pomik osi Y: 520 mm, pomik po osi Z: 460 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, This 5-axis SPINNER U-620 was manufactured in 2013. It is equipped with a Heidenhain iTNC 530 control unit, a vertical spindle with a maximum speed of 12,000 rpm, and a tool magazine capacity of 32 tools. The integrated NC rotary swivel table expands the possibilities of simultaneous 5-axis machining. If you are looking for a high-quality milling machine, you should consider the SPINNER U-620, which we offer for sale. Please contact us for further information regarding this machine. • Operating hours (according to control panel): • Control ON: approx. 50,450 h • Machine ON: approx. 49,000 h • Program run: approx. 30,900 h • Spindle hours: approx. 32,000 h • Spindle: • Type: Vertical • Tool changer: • Tool magazine capacity: 32 tools • Tool change: Automatic • Table / 5-axis unit: • Table type: Integrated NC rotary swivel table • 5-axis unit: Fully integrated rotary and swivel axes • Working area: • Fully enclosed work area • Large front access doors • Good view of the working area • Internal work area lighting • Coolant system: Standard external coolant supply Additional equipment (not part of the base machine): • Mechanical vise (clamping device not included unless otherwise agreed) • Some tools included in the offer Technical Specification Taper size: SK 40 Ksdpfx Afsya Dtgj Nell

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 15.000 obr/min, proizvajalec krmilnikov: HAAS, moč vretenovega motorja: 22.400 W, This 5-axis universal machining center, HAAS UMC-500SS, was manufactured in 2023. It offers advanced capabilities for complex and precise machining tasks. Consider the option of purchasing this HAAS UMC-500SS universal machining center. Contact us for further information. Additional Equipment • Chip conveyor: Positioned above the coolant tank, featuring automatic return function Machine Advantages Technical Machine Advantages • Drive system: inline direct drive • High-speed machining option (HSM): supports feed rates up to 1200 ipm (305 m/min) • Tool holders: 18 tool holders with collets and accessories • Through-spindle coolant system: allows high-pressure cooling up to 21 bar (300 psi) • Haas option “Through-Spindle Air Blast” (TAB): high-pressure air supply to the cutting zone Kodpfoyaqp Ijx Af Njll • Programmable coolant nozzle: precise CNC-controlled positioning • Chip filtration kit: 200-micron filter and pan-type chip collector • Clamping set: includes a self-centering 130 mm vise, a step platform, as well as various tool holders and accessories. Additional Information This machining center offers advanced features such as 5-axis machining, high spindle speeds, and integrated cooling and air blast systems, making it ideal for complex machining tasks and high-production environments.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, število osi: 3, This 3-axis vertical honing machine GEHRING 630-1 LR was manufactured in 2017. It is equipped with a HAINBUCH quill with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction sleeves. The machine is ideally suited for precision honing applications. Please contact us for more information regarding this unit. Additional equipment: • HAINBUCH hexagonal collet, Ø65 mm - quantity 1 Kedpoyap Uisfx Af Noll • HAINBUCH alignment screwdriver - 3 pieces • HAINBUCH drawbar adapter - quantity 1 • Cables (unspecified) - quantity 2 • Clamping tool (unspecified) - quantity 1 • Internal coolant collector - quantity 1 • Hydraulic tool holders VDI40, Ø20 (ISCAR) - quantity 8 • MAPAL holder D12, Ø13, part number unspecified - quantity 4 • Reduction sleeve for hydraulic holder, 20→13 mm - quantity 6 • MAPAL carbide reamer plate "Axel 92-R-0N" - quantity 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) - quantity 1 • Hydraulic holder for reduction sleeve ISCAR 20→14 - quantity 3 • Chisel/tool holder DIN 69880 - E2 - 40×40 - quantity 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) - quantity 4

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, največja hitrost vretena: 15.000 obr/min, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 635 mm, pomik po osi Z: 635 mm, This 5-axis HAAS UMC-1000SS was manufactured in 2020. It features a large work envelope with X, Y, and Z axes of 1016 mm, 635 mm, and 635 mm respectively. Ideal for complex geometries and multi-sided machining. Take the opportunity to purchase this HAAS UMC-1000SS universal machining center. Contact us for further information. Additional Equipment Ksdpfxoyalh Se Af Noll - Belt-driven chip conveyor - Export packaging - 8-station pallet pool for UMC - UMC spare tool storage (1 unit) - Through-Tool Air Blast (TAB) - Coolant secondary filter - Chip tray filter set Machine Advantages Technical Advantages - Standard program memory: 1 GB / Coolant tank capacity: 55 gallons / CNC control cabinet cooling / Dynamic Work Offsets and Tool Center Point Control (DWO/TCPC) / Rapid Power-Failure Detection Module / Ethernet interface / HaasConnect: Remote Monitoring / HaasDrop: Wireless File Transfer - Second home position / High-Speed Machining (HSM) / Media display via M-code (M130) / Remote jog handle with touchscreen / Rotary encoders / Synchronized tapping / Safe Run (safety restart function) / 1 year standard warranty - Enclosure with mist extraction / Variable coolant pressure / Wi-Fi connectivity to Haas control / Wireless Intuitive Probing System (WIPS) / Side-mount high-speed tool changer – 50+1 tools / CT (SK) 40 spindle taper - Through-Spindle Coolant (TSC): 69 bar (1000 psi) Additional Information Machine still under power

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D powerline, število osi: 5, Ta 5-osni stroj DMG DMC 100 H je bil izdelan leta 2006. Opremljen je s Siemens 840D Powerline krmiljem z Shopmill in robustnimi hodnimi potmi po X, Y in Z osi do 1000 mm. Ponuja visoko hitrost vretena do 8000 min⁻¹, dva menjalna razreda ter držalo orodja HSK 100 z do 360 pozicijami. Vključuje dve paleti dimenzije 800 x 800 mm in B-os z natančnostjo 0,001°. Kontaktirajte nas za več informacij o tem stroju. Dodatna oprema • Elektronski ročni kolesič • Način delovanja 4 • Izsesavanje oljne megle Ksdpfxjyaau Ts Af Njll • Notranje hlajenje (IKZ): 40 barov • Trakasti papirni filter • Merilna tipala Renishaw OMP 60 • Pištola za izpiranje ostružkov Prednosti stroja Tehnične prednosti stroja • Držalo orodja: HSK 100 • Število pozicij orodja: 270 / 360 • Število palet: 2 • Velikost palete: 800 x 800 mm Dodatne informacije Stroj je še vedno priključen na napajanje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, CNC stroj za honanje kroglic in kalot z Turbo separatorjem Premer obdelovanca (kroglice): ○22–○64 mm Premer obdelovanca (kalote): ○22–○64 mm Kodpfx Aex U T Auef Njll Krmiljenje: GE FANUC / Serija 321i-A Merilna enota: Marposs tip 7/ MHIS Za notranje in zunanje merjenje Dodatni tehnični podatki na fotografijah

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 22.180 h, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC430, skupna višina: 3.200 mm, širina mize: 1.250 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 18.000 kg, največja hitrost vretena: 8.000 obr/min, število mest v zalogovniku orodij: 120, največja dolžina izdelka: 6.000 mm, število osi: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control unit, an SK50 spindle taper, and a 120-position tool magazine. With a total of 22,180 spindle hours, this is an excellent opportunity to purchase the universal machining center DMG DMU 125 P hi-dyn. Please contact us for further information about this machine. • Spindle hours: 22,180 Kljdex Sz Dhopfx Af Nel • Tool magazine/positions: 120 • Travel paths: 1250 x 880 x 800 mm • Tool holder: SK50 • Tool changer: 120 positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working area: X-axis: 1250 mm, Y-axis: 880 mm, Z-axis: 800 mm • Dimensions: approx. 6 x 8 x 3.20 m (H) • Weight: approx. 18,000 kg B-axis is indexed Additional features: • Full enclosure • Through-spindle coolant supply • Air blast through spindle retrofitted • Chip conveyor • 600-litre coolant tank • NC rotary table D1250 x 1000 mm • Maximum table load (center): 2,000 kg • Clamping grid: 9 T-slots 18H7 at 100 mm spacing • Motor package with SK50 gearbox — spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared probe • Electronic handwheel • 4 operating modes available • Rinsing gun with pump Technical Specification Taper size: SK 50 Through-spindle coolant: Yes Dimensions Machine depth: 8000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: n/a, število osi: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004 and features a high-speed motor spindle with 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It is equipped with a 5-axis milling package, 92 tool stations, and a Marposs collision monitoring system. Ideally suited for machining long parts up to 6,000 mm and pendulum machining. If you are looking for a high-quality milling machine, you should consider the CHIRON Mill 6000 SK we have for sale. Contact us for further information. Machine advantages Ksdpfxsx Nr Irs Af Noll Technical machine advantages • 92 tool positions HSK-A63 (background magazine) • Long-part machining up to a maximum of 6,000 mm • Face machining (5th side) horizontally with swivel head (right/left) • Pendulum machining with central divider, max. workpiece length 1,773 mm with face machining on both ends (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum field, positioning and clamping via linear system (hydraulic release, mechanical clamping) Additional Information Additional Equipment High-speed package with motor spindle: 12,000 rpm, 140 Nm Production package: Scraper belt conveyor, discharge height 1,050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with high-pressure pump and control valve Rinsing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m³/h Rotatable viewing window left and right (1,400 mm from machine center) Automatic loading doors Central divider for pendulum machining 5-axis milling package Air blow-off Tool life monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, parts counter) Marposs (Brankamp) CMS100 collision monitoring system 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 hydraulic vices KOHN Multi 2000 MFS 125/680 HD Two-part operator stand across the entire working width of 6,000 mm With the 3 axes x, y, z and the swivel head, forms such as curves can be milled with the 5-axis milling software package. The software then synchronizes the axes.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Avtomatski satinirni stroj s 3 agregati in priklopom na mokri filtr za odsesavanje prahu. Ksdjx I Hmyepfx Af Nell Delovna širina 1150 mm 1. pozicija – Valj za odstranjevanje ostrin 2. pozicija – Orbitalne ščetke za zaobljenje robov 3. pozicija – Končni valj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 17.050 h, potovalna razdalja osi X: 670 mm, pomik osi Y: 830 mm, pomik po osi Z: 600 mm, skupna masa: 20.000 kg, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It is equipped with a Heidenhain iTNC 530 control system, a new spindle with 5,700 operating hours since 2021, and a robust spindle speed of 18,000 rpm. The machine offers a large travel range with dimensions of 670/830/600 mm and supports 96 tool stations. Additional features include internal coolant supply with 60 bar pressure, a comprehensive coolant system, and a chip conveyor. Take advantage of the opportunity to purchase this versatile POSmill H 800 U machining center. Contact us for further information. Additional equipment: • New spindle since 2021: only 5,700 spindle hours (spindle replacement due to wear) • Machine inspection under power possible Machine advantages Technical benefits: • Air-through-spindle feature • Internal coolant supply: 60 bar • Coolant unit with 1,000 l paper band filter • Rotating viewing window • Chip rinse gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement system • Heidenhain 3D touch probe • Mobile electronic handwheel • Kinematic package Additional information: Spindle replaced due to wear (new spindle: 5,600 hours since 2021). Production hours: Control powered on: approx. 33,300 hours, Spindle powered on: 17,050 hours (new spindle 5,600 hours, replaced in 2021 due to wear). Tool stations: 96; includes tool holders (shrink-fit chucks, collet chucks, etc.). Kledpfx Afex D Dx Ao Njl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 11.200 h, potovalna razdalja osi X: 670 mm, pomik osi Y: 820 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis POSmill H800U was manufactured in 2017. It is a universal machining center featuring a Kessler spindle with 18,000 rpm and a turning diameter of 800 mm. The machine is equipped with a Heidenhain 530 control unit and is fully fitted with Heidenhain measuring systems on all axes. Notably, it offers 96 tool changer slots. Consider the opportunity to purchase this POSmill H800U universal machining center. Contact us for further information. • New service scheduled for April 2025 including replacement of rotary union (€8600) • 96 tool changer positions • Space-saving base, stacked coolant supply (rare) • Large spindle chiller • Fully equipped with Heidenhain measuring systems on all axes • Kessler swivel arm, turning diameter 800 mm, fully usable with zero point system • Internal coolant pressure: 40 bar • Coolant system: water and air both externally and through the spindle, internal coolant pressure 40 bar with 600 litres capacity • NC rotary tilting table: Ø 800 mm The machine underwent a complete overhaul at the beginning of 2025 – relevant documentation is available. Rotary unions, rod connections, and general maintenance were carried out. Additional equipment: Kjdox D Eciepfx Af Njll • Accessories: chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 61.913 h, potovalna razdalja osi X: 450 mm, pomik osi Y: 580 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 28.000 obr/min, moč vretenovega motorja: 29.000 W, kot vrtenja osi C (maks.): 360 °, število osi: 5, This DMG Mori HSC 55 linear universal machining centre was manufactured in 2011 and has recorded 61,913 control hours, 59,275 machine running hours, 10,986 program running hours, and 10,631 spindle hours (spindle replaced at approx. 7,300 hours). The machine features a spindle speed of 20 - 28,000 rpm and a capacity for 30 tools. It is equipped with a pallet changer, the control unit is a Heidenhain iTNC 530, and the machine has 5 axes. Machine advantages Quality benefits of the machine • The machine has a capacity for 30 tools • Pallet changer Technical machine advantages • Measuring length: 400 x 400 mm • Planar runout of the clamping surface Ø 350 mm • Axial stability of the working spindle: 0.005 mm • Spindle nose: 250 mm • Tool holder HSK-A63 according to DIN69893 • Pickup tool changer with 16 positions (chain) • Active cooling unit for main spindle and linear drives // active cooling unit for control cabinet • Direct absolute measuring system incl. sealing air • Coolant/air blast switching • Z-axis extension to z = 460 mm Additional information Kledpfx Afjx D Eqgj Nsl The machine is still under power.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, obratovalne ure: 30.912 h, Táto 5-osá DMG DECKEL MAHO MH 800 E2 bola vyrobená v roku 1990. Disponuje polokabinovým postrekovým krytom, prispôsobiteľným riadením s agregátom, rozvodnou skriňou, vertikálnym MAHO meničom nástrojov, NC rotačným stolom a elektrickým ručným ovládacím panelom. Využite príležitosť kúpiť toto univerzálne obrábacie centrum DMG DECKEL MAHO MH 800 E2. Kontaktujte nás pre viac informácií o tomto stroji. • Postrekový kryt (polokabína) • Riadenie s prispôsobením a výkonnostnou jednotkou, vrátane rozvodnej skrine • Rozhranie na pripojenie periférnych zariadení • MAHO vertikálny menič nástrojov • NC rotačný stôl • Elektrický ručný ovládací pult • Presnosť/poziciovanie: • Tolerancia polohy T_P: 0,020 mm • Neistota polohy P_a: 0,015 mm • Vôľa U: 0,005 mm Kodpfx Afox D Hqze Nsll • Rozptyl polohy: 0,005 mm • Doplnkové vybavenie: • Tlmiace platne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.215 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 640, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis MTcut UDS80H-5A was manufactured in 2019. It features a spindle with 20,000 rpm, 120 Nm torque, and 35 kW drive power. Equipped with an HSK63 tool holder, a 96-position tool changer, and a Kessler rotary-swivel table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT display, and Ethernet connectivity. Ideal for precision machining with Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; machine 5,480 h; program run time 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary-swivel table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales on all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" TFT color display • Interfaces: Ethernet interface, 2x USB ports • Control functions: plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement Klodpfx Ajx D In Ujf Nel • Heidenhain TS460 workpiece probing system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain KKH 250 calibration ball • Extraction system: Filtermist FX4002, airflow rate 1,250 m³/h • Swiveling inspection window • Work area lighting • Tool package Technical Specification Taper Size HSK 63

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 2.925 h, največja hitrost vretena: 3.000 obr/min, skupna masa: 725 kg, Splošni podatki Teža stroja: 725 kg Kljdpfx Afox D Nw Ro Njl Glavni pogon Območje vrtljajev vretena: 200–3000 vrt/min Ta stroj Sunnen ML 2000 je bil izdelan leta 2006. Gre za vodoravni honalni stroj z območjem premerov 1,5 – 165 mm za ročni pomik in 1,5 – 95 mm za avtomatski pomik. Dolžina pomika dosega do 170 mm. Deluje z vrtljivimi hitrostmi vretena od 200 do 3000 vrt/min in ima motor vretena z močjo 7,5 kW. Stroj tehta 725 kg in zahteva približno 3,5 m² prostora. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Honenje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, Tento 5-osni Matec 30-HV je bil proizveden leta 2009 in je vsestranski univerzalni obdelovalni center z velikim hodom X-osí 3000 mm in Y-osí 600 mm. Ponaša se z visokohitrostnim razponom do 12.000 vrt/min, orodnim magazinom za 36 orodij in visokotlačnim hladilnim sistemom (70 barov). S pogonsko CNC-rotacijsko mizo in krmiljenjem Heidenhain iTNC 530 je idealen za kompleksno 3D obdelavo. Za več informacij o tem stroju nas kontaktirajte. Dodatne informacije • Dimenzije stroja (D׊×V): X = 3000 mm (miza 3500 mm), Y = 600 mm, Z = 800 mm horizontalno Kedpfex D Rggsx Af Nell • Hitri pomik: 48 m/min v oseh X, Y in Z • Pogonska CNC-rotacijska miza za 3D obdelavo • Orodni magazin za 36 orodij • Največja dolžina orodja: 380 mm • 3D merilna sonda z brezžičnim upravljanjem in prenosom signala • Visokotlačno hlajenje vzdolž in skozi vreteno (70 barov) • Posoda za hladilno tekočino: 900 l • Samodejna vrata

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, število osi: 3, Glavni pogon Število osi: 3 Klodpfx Aex D Rihef Nsl Ta 3-osni stroj GEHRING L2-630 je bil izdelan leta 2013. Opremljen je z 6-postajno vrtljivo mizo, ki vključuje 2 honalni postaji, 2 merilni postaji in 1 ščetkalno postajo, vse popolnoma avtomatizirano. Idealen za natančne honalne aplikacije. Za več informacij nas kontaktirajte. Vrste uporabe Honanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Glavni pogon Število osi: 3 Kodjx D Rinepfx Af Nsll Ta 3-osni vertikalni honalni stroj GEHRING L2-630 je bil izdelan leta 2010. Opremljen je s 6-postajno rotacijsko mizo, dvema honalnima postajama, dvema merilnima postajama in eno postajo za krtačenje. Popolnoma avtomatiziran z robotskim podajalnikom – razmislite o nakupu tega vertikalnega honalnega stroja GEHRING L2-630. Za več informacij nas kontaktirajte. Vrste uporabe Honanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Splošni podatki Kjdpfx Afsx D Sqys Njll Mere širina: 2350 Mere dolžina: 3150 mm Mere višina: 2180 mm Teža stroja: 10.500 kg Krmilna enota Znamka: SIEMENS Model: Sinumerik 840 D Glavni pogon Število osi: 9 Ta 9-osni horizontalni honalni stroj FASSLER HMX 400 je bil izdelan leta 2005. Opremljen je z naprednim krmilnim sistemom Sinumerik 840 D, ki zagotavlja natančnost in enostavno upravljanje. S premerom honalnega kamna 400 mm in maksimalnim premerom obdelovanca do 350 mm je idealen za zunanje in notranje honanje. Izkoristite priložnost za nakup stroja FASSLER HMX 400 za horizontalno honanje. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Honanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 3.200 kg, največja hitrost vretena: 24.000 obr/min, število osi: 12, This 12-axis Emmegi Quadra L1 was manufactured in 2013 and offers extensive movement with X, Y, Z, U, V, W, H, P, Q, B, C, and CI axes, as well as high-speed traversing up to 120 m/min. It features a milling unit with 6 air-cooled electrospindles, a cutting unit with a 600 mm saw blade, and a robust monoblock frame. Ideal for complex milling, drilling, and cutting applications. Contact us for more information about this machine. • Milling unit with 6 air-cooled electrospindles • Max. Power: 5.6 kW • Functions: Milling, drilling, and cutting • Number of axes: 12 • X-AXIS travel: 320 mm, speed: 30 m/min, acceleration: 1.5 m/sec² • Y-AXIS travel: 402 mm, speed: 30 m/min, acceleration: 5 m/sec² • Z-AXIS travel: 395 mm, speed: 30 m/min, acceleration: 5 m/sec² • A-AXIS rotation: 0° ÷ 360°, speed: 6000°/min • U-AXIS travel: 9660 mm, speed: 120 m/min, acceleration: 7.5 m/sec² • V-AXIS travel: 138 mm, speed: 9 m/min, acceleration: 0.36 m/sec² Kledpfx Asx D Eyzef Nsl • W-AXIS travel: 215 mm, speed: 9 m/min, acceleration: 0.36 m/sec² • H-AXIS travel: 627 mm, speed: 24 m/min, acceleration: 2.5 m/sec² • P-AXIS travel: 880 mm, speed: 30 m/min, acceleration: 5 m/sec² • Q-AXIS rotation: 298°, speed: 6600°/min • B-AXIS travel: 790 mm, speed: 60 m/min • C-AXIS travel: 47 mm, speed: 9 m/min • Operation and control cabinet with cooling system • CNC PC with Celeron M 1.5 GHz processor • 15" touchscreen display • 1 GB RAM • 4 GB Compact Flash storage • 1 USB port • RJ45 network card Maximum bar length in the loading magazine (infeed) is 7500 mm. The maximum outfeed length is 7000 mm. Additional equipment: • Pressurized spray system • Automatic and motor-driven clamping systems • Monoblock machine frame made of electro-welded and normalized steel Dimensions Machine depth: 22,000 mm

Stanje: rabljeno, Hitrost vretena: 200 - 3000 obr/min Število hodov: 60 - 500 hodov/min Območje dolžine hoda: 6,0 - 170 mm Teža: 800 kg Ksdjxy Ikzjpfx Af Nell Vse informacije brez garancije.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 203214, teža obdelovanca (maks.): 2 kg, največja hitrost vretena: 3.700 obr/min, premer obdelovanca (maks.): 150 mm, lastna masa: 1.579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Kljdpfx Ajxxkfxof Nel Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air supply requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Standalone weight: 1,579 kg Baseplate requirement: Minimum thickness 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed value, spark-out) Automatic finishing cycle Machine operating modes: automatic, manual Series production Single-part production Optional clamping

Stanje: rabljeno, Leto izdelave: 2005, Tip honalnega stroja Krmiljenje Nagel Stroj je po naši oceni v dobrem rabljenem stanju in si ga je mogoče po dogovoru ogledati pod napetostjo. Na voljo sta 2 stroja. Pribor, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Kljdpjxwdxisfx Af Nsl Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!