LST Laser und Strahl Technik

Stanje: zelo dobro (rabljeno), Na prodaj profesionalni mobilni industrijski označevalnik FlyMarker XL. Ročna naprava za trajno označevanje kovinskih delov s točkovno tehnologijo dot peen. Cpodpfx Afeyhnu Dexeu Model FlyMarker XL Napajanje 24 V DC Upravljanje preko vgrajenega zaslona in tipkovnice Samostojno delovanje brez potrebe po priklopu na računalnik Proizvajalec Nemčija Tehnično stanje dobro, naprava se vklopi in deluje. Zaslon in tipkovnica sta brezhibna. Vizualno stanje rabljeno, običajni znaki uporabe. Uporaba Označevanje serijskih številk Tehnične in proizvodne oznake Označevanje jekla, aluminija in drugih kovin V kompletu Označevalnik FlyMarker XL Napajalnik Kabli Natanko to, kar je na slikah Možna pošiljka ali osebni prevzem. Za vprašanja sem na voljo.

Stanje: rabljeno, Leto izdelave: 1969, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Gel/1 02.0026, Rabljeni gramozni stroj Proizvajalec: Franz Kuhlmann Cjdpfx Aoyg Rv Uefxepu Serijska št.: Gml/1 / 02.0026 z dodatno opremo

Stanje: dober (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.700 h, Funkcionalnost: popolnoma funkcionalen, laserska moč: 45 W, -Proizvajalec: Trotec -Model: Speedy100c-8063 -Datum izdelave: avgust 2022 -Serijska številka: S1-7145 -45 W CO2 -230 V -50 Hz -z avtomatskim ostrenjem -z dodatnim pihanjem Codpfx Ajygl Nvsfxepu -z lečo 2,0" -z rezalno mizo 12,7 mm -z nadgradnjo za večjo zmogljivost -z X-osjo z 2 vozički -merila v mm vklj.: -Odvod -Proizvajalec: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V -Serijska številka: 01732-18928 -povezovalni kabel za odvod Dodatno na voljo: večja količina graviranih delov iz lesa, plastike itd. Različne oblike / motivi Pošiljanje možno po dogovoru. Prodaja samo pravnim osebam.

Stanje: rabljeno, Leto izdelave: 2022, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, skupna širina: 1.085 mm, skupna višina: 1.050 mm, skupna dolžina: 1.550 mm, delovno območje: 1.000 mm, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, Ponujamo ta rabljeni Q400 Trotec laserski stroj in odsesovalno enoto Atmos Duo Plus 230 z prenosnikom, letnik 2022. Model: Trotec Q400 Odsesovanje: Atmos Duo Plus 230 Pretok zraka: 2×320 m³/h Tlak: 8500 Pa Vhodna napetost: 230 VAC Tok: 16,0 A Moč: 2,4 kW Frekvenca: 50/60 Hz Zaščitni razred: IP40 Trotec št.: 42335 Električna shema: AD 1.0 Datum izdelave: 10/2022 Serijska številka: 01422-19284 Dimenzije laserja: Cpedpfx Afjygl Daexeu Dolžina 155 cm x širina 108,5 cm x višina 105 cm Dimenzije odsesovalne enote: Dolžina 54,5 cm x širina cca 65 cm x višina 105 cm Gravirna površina: 100 x 60 cm Samo osebni prevzem. Ogled možen po dogovoru. Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2011, Ytterbium laser - vlakenski laser Cpsdpfjyghi Sjx Afxou Tehnični podatki: Laserski razred 4 Laserska moč: > 10 W Energija pulza: < 2 mJ Trajanje pulza: > 5 ns Valovna dolžina: 1060 - 1070 nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1724, laserska moč: 25 W, vrsta hlajenja: zrak, skupna širina: 850 mm, skupna višina: 1.950 mm, skupna dolžina: 1.000 mm, delovno območje: 1.250 mm, skupna masa: 210 kg, trajanje garancije: 6 meseci, širina odprtine vrat: 700 mm, dolžina mize: 700 mm, širina mize: 400 mm, Oprema: kabina, Used laser marking system for precise marking of metals, plastics, and hybrid components. Demonstration unit, 6-month warranty, Made in Germany. Technical Specifications – Laser - Laser source: Keyence - Marking field: 125 × 125 mm - Focal distance: 189 mm (±21 mm) - Features: Autofocus & distance measurement (MD-AD-ZT), 3D Marking Add-In (MD-AD-3D) Csdpfeyf Ap Dox Afxspu Workstation – SK LASER KOLLTRONIC - Laser class 1, enclosed workstation - Combined seated/standing workstation - Aluminum profile housing, silver paneling - Front door with laser safety glass, bright working illumination - Rear service door (screwed, for oversized workpieces) - Motorized Z-axis for focus adjustment - Suction nozzle DN50 for extraction - Dimensions: Standard for SK LASER KOLLTRONIC Workstation 1 Control & Software - Industrial PC - 19" TFT color monitor, keyboard & mouse - Controlled via Keyence software, including 3D and autofocus functions Condition & Delivery - Demonstration unit, used - 6-month warranty - Operating temperature: 0–40 °C - Delivery optional

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1746, dolžina gredi: 10.564 mm, laserska moč: 100 W, vrsta hlajenja: zrak, delovno območje: 1.750 mm, skupna masa: 205 kg, višina mize: 1.760 mm, dolžina mize: 12.000 mm, širina mize: 9.200 mm, Oprema: kabina, Used fiber laser system for laser engraving, marking, and microstructuring on metals and plastics. Showroom machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Output: 100 W Csdpfxoyfvhge Afxepu - Wavelength: 1064 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external chiller required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer laboratory values; actual values may vary depending on application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Kontrollic cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom modifications available on request - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import with one click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as a red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sit/stand workstation - Aluminum profile housing, front door with laser protection glass, bright workspace lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25 mm hole grid, 710 × 400 mm - Motorized Z-axis, travel distance 500 mm (gross) - Rear door for oversized workpieces (with door open, laser class 4) - Extraction port DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35 °C - Connected load: 230 V / 50 Hz Condition & Delivery - Showroom machine, tested - Optional: Delivery including commissioning within Germany

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 10.600 mm, laserska moč: 60 W, vrsta hlajenja: zrak, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna dolžina: 1.700 mm, delovno območje: 1.200 mm, trajanje garancije: 6 meseci, vrsta nastavitve višine: električni, višina mize: 7.000 mm, dolžina mize: 4.000 mm, Oprema: kabina, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Data - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air-cooled - Power supply: 230 V / 50 Hz - Scanner & Optics - X-Y galvo scanner with mirror mount - F-Theta lens: F = 200 mm, anti-reflection protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap files Cpjdjyfucvopfx Afxeu - Intuitive user interface, user-friendly Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE, TÜV certified Condition & Delivery - Refurbished, technically tested Offer ex works plus delivery, while stocks last

Stanje: rabljeno, Engraving machine with computer system Cpjdpfjydlbyox Afxeu Sign Pro 98

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, skupna višina: 2.370 mm, skupna masa: 2.500 kg, največja dolžina izdelka: 2.850 mm, This 4-axis laser engraving machine, DMG Lasertec 40, was manufactured in 2009. It features a picosecond laser with an average power of 50 W and a wavelength of 1064 nm. The machine offers a traverse range of X = 400 mm, Y = 300 mm, and Z = 500 mm, with maximum feed rates of 15 m/min for the X and Y axes and 12 m/min for the Z axis. Take advantage of this opportunity to purchase the DMG Lasertec 40 laser engraving machine. Contact us for further information. • Machine footprint (incl. operation/maintenance with extraction): Depth 3.5 m, Width 3.0 m, Height 2.5 m • Weight with X-Y table: approx. 2,500 kg • Power consumption (with laser and cooling unit): 16 kVA • Fuse protection: 40 A at 400 V • Operating voltage: 3/N/PE/400 V/230 V 50 Hz • Maximum permitted deviation: ±10% • Control voltage: 24 V DC • Permissible ambient temperature: +15°C to +35°C • Permissible relative humidity: max. 75% at 20°C • Traverse range (with X-Y table): X = 400 mm (longitudinal), Y = 300 mm (transversal), Z = 500 mm (vertical) • Table size: 400 x 300 mm • Feed drive: Digitally controlled AC motor and ball screw spindle on each linear axis • Maximum feed speed: X/Y: 15 m/min; Z: 12 m/min • Guides: Ball bearing linear guides in all linear axes • Measuring systems: X, Y, Z indirect length measuring device • Machine accuracy: P = 0.010 mm (VDI/DGQ 3441) • Laser type: Picosecond laser • Average laser power: 50 W • Wavelength: 1064 nm • Scanner: Planar field lens; focal length 163 mm; field size 65 x 65 mm • Lubrication: Manual central lubrication • Electrical control cabinet: with cooling unit (integrated into the machine) Cpjdpsya Ah Aefx Afxju • Cabin: Fully enclosed cabin including roof; laser protection wall (optionally multiple); optimal operator access.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 2.360 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S5-0910, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 120 W, vrsta hlajenja: zrak, skupna širina: 1.920 mm, skupna višina: 1.140 mm, skupna dolžina: 1.240 mm, delovno območje: 1.245 mm, skupna masa: 500 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 1.420 mm, vhodni tok: 16 A, valovna dolžina laserja: 10.600 nm, vhodna frekvenca: 50 Hz, vrsta laserja: CO₂ laser, For sale is a pre-owned, exceptionally well-maintained Trotec SP500 CO laser cutter with 120 watts of power and extensive additional equipment. Technical Specifications: Model: Trotec SP500 Power: 120 watts CO Year of manufacture: September 2019 Working area: 1200 mm x 700 mm Camera system: Integrated, for precise positioning Condition: Fully operational, very well cared for Included accessories: Honeycomb table (for fine cutting operations) Slat table (for processing thicker materials) Rotary engraving unit (rotary axis for cylindrical objects) 3 different focusing lenses (for various applications and material thicknesses) Cpsdpfeyap Rdox Afxsu Original Trotec extraction ports PC with Trotec software, keyboard, and monitor (plug & play) Various tools, spare parts, and accessories included as a package Special features: Ideal for engraving and cutting wood, acrylic, plastics, leather, paper, textiles, and much more High processing speed and precision Large working area – ideal for sign making, model construction, industry, or creative workshops Ready for immediate use – no further investment required Price & Contact: If you are interested or have any questions regarding the machine or accessories, feel free to contact me. Inspection and test lasering available by appointment.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna višina: 455 mm, skupna masa: 63 kg, Ce EPILOG Laser Fusion Edge 12, fibre 30 watts, a été fabriqué en 2022. Il dispose d’une zone de travail de 610x305 mm et d’une profondeur Z maximale de 178 mm. La machine fonctionne avec une source fibre de 30 watts et atteint des vitesses allant jusqu’à 120 IPS (3,05 m/s) avec une accélération de 5G. D’un poids de 63 kg, elle est conçue pour une précision maximale lors de la découpe laser fibre. Si vous recherchez des fonctions de découpe de haute qualité, envisagez la machine EPILOG Laser Fusion Edge 12 que nous proposons à la vente. Équipements supplémentaires • Source : fibre 30 watts • Vitesse : 120 IPS (3,05 m/s) avec accélération 5G Avantages de la machine Avantages techniques • Profondeur Z maximale : 178 mm • Zone de travail : 610x305 mm Informations complémentaires Cjdpfex U Tmgjx Afxepu Machine encore sous tension Dimensions Profondeur de la machine : 1003 mm

Stanje: rabljeno, Laser TECHNIFOR TF410 Codjx Tvhkspfx Afxspu

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vhodna frekvenca: 50 Hz, We are offering a used Siro-Lasertec SLC 20W laser engraving and marking machine, year of manufacture 2019, previously used in a commercial environment. The machine is fully functional, was not used in continuous operation, and has low operating hours. There is a minor dent on the housing, which was already present upon delivery and is purely cosmetic (no impact on functionality). Technical Data (according to nameplate / manufacturer specifications): Type: SLC 20W Manufacturer: Siro-Lasertec GmbH Year of manufacture: 04/2019 Laser power: 20 W Maximum power consumption: 600 W Mains voltage: 100–240 V AC Frequency: 50–60 Hz Scope of delivery: – Siro-Lasertec SLC 20W laser engraving machine – ECO BF5 extraction and filtration unit – Motorized rotary axis / rotation axis with chuck Cedpfex Tqc Njx Afxjpu – Laptop with installed laser software – 9 additional filter cartridges – Connection and accessory parts The machine is ready for immediate use. A demonstration upon collection is possible and encouraged. Price: €4,201.68 net plus 19% VAT (€5,000.00 gross) Commercial sale with invoice and VAT shown separately. Collection preferred, no shipping. Sale subject to exclusion of liability for material defects, as permitted by law.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Ta 3-osni Baublys Control Laser UL 65QR/NC 100 50 50 SOMA je bil izdelan leta 2008. Opremljen je z Nd:YAG trdnotelesnim Q-switched laserjem, ki dosega frekvence do 50 kHz. Stroj ima okroglo transportno mizo s premerom približno 75 cm in je nameščen v ohišju velikosti 2,4 x 2,6 metra. Če iščete zanesljive zmogljivosti laserskega označevanja, razmislite o Baublys Control Laser UL 65QR/NC 100 50 50 SOMA — za več informacij nas kontaktirajte. Vrste uporabe: Cpsdpfx Aox Sz Efofxeu Drugi stroji za obdelavo pločevine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, laserska moč: 120.000 W, Glavni pogon Moč laserja: 120 kW Tehnične specifikacije Cpodpfx Afex I S Nyexou Hitrost graviranja: 3000 m/s Ta 3-osni laserski gravirni stroj Trotec Speedy 360 je bil izdelan leta 2023. Opremljen je z CO₂ laserjem z močjo v območju 30–120 W in delovno površino 610 x 305 mm. Stroj zmore obdelovati materiale do debeline 10 mm in je primeren za različne materiale, med drugim les, akril in steklo. Na voljo ima integriran odsesovalni sistem in barvni zaslon na dotik. Če iščete visoko kakovostno graviranje, razmislite o stroju Trotec Speedy 360, ki ga ponujamo v prodaji. Kontaktirajte nas za več informacij. Vrste uporabe Drugi stroji za obdelavo pločevine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Tip: TSM 15-10-UG Leto izdelave: 2012 Vrsta krmiljenja: NR4000.2.1 IPC PODROBNOSTI O STROJU Naziv izdelka: CNC označevalni stroj OPREMA Codpfxjx Iuhfj Afxepu Navodila za uporabo priložena

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 10 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 50022358, laserska moč: 200 W, skupna masa: 1.000 kg, Stroj nikoli ni bil v uporabi, zato je kot nov. Sam ga še nisem zagnal, zato ne morem veliko povedati o njem. Cedpfsx It Abox Afxspu Če kupec pozna ta stroj, ga je možno pred nakupom priključiti na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 18.000 obr/min, potovalna razdalja osi X: 500 mm, pomik osi Y: 500 mm, pomik po osi Z: 100 mm, obremenitev mize: 20 kg, Nova cena stroja je znašala 39.875 EUR! TEHNIČNE PODROBNOSTI Delovno območje Pomik X: 500 mm Pomik Y: 500 mm Pomik Z: 100 mm T-utorna miza X: 700 mm Y: 570 mm Cpedpfjx Hfzmox Afxju Največja obremenitev mize: 20 kg Podatki o vretenu HFS vreteno moč: 80 W HFS vreteno hitrost: 18.000 vrt/min Gibanje Hitri pomik: 100 mm/s Ponavljajoča točnost: 0,01 mm Orodje: 6 mm PODROBNOSTI O STROJU Električni priklop: 240 V Programska oprema: Signumeric OPREMA Zložljive harmonikaste zaščite Energetske vodilne verige Jäger gravirno vreteno 42-2 W27 FS z vključeno frekvenčno pretvornikom Ojačana podkonstrukcija Odvod toplote preko nosilca vretena 2 m izhodni kabel Menjalni nosilec za uporabnikov elektro gravirnik

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 600 h, Funkcionalnost: popolnoma funkcionalen, laserska moč: 200 W, vrsta hlajenja: voda, From business liquidation: Trotec SP2000 (original price: €144,582) from 2018, large-format CO₂ laser cutting system for precise processing of acrylic glass, wood, cardboard, textiles, and other materials. The machine is designed to meet high production demands and offers reliable cutting quality throughout the entire working area. Annual servicing has been conducted, maintained by Trotec. With only around 600 operating hours, the machine is in excellent, as-new condition. Includes chiller, extraction system, and control unit. Operating manual and technical data sheet included. Technical specifications (general): • Large-format laser system with a spacious processing area • Powerful CO₂ laser unit (model-typical power) • Precise and clean cut edges, especially on acrylic • High repeat accuracy and robust mechanics • Efficient material utilization through optimized software control • Pass-through for sheet material and large-format workpieces • Includes chiller and as-new accessories Condition: Cjdpfx Aex Emz Sjfxepu Well-maintained condition, immediately ready for use Collection & Access: Individual collection appointment possible. Access via a large gate – ideal for transporters. Assistance with loading available upon request. Important: Invoice will be issued. Listed prices are net. Contact: We will reply as soon as possible. Available by phone daily from 5 PM, Saturdays all day. Please contact us if you have any questions or concerns.

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S36-0330, Description For sale is a Trotec Speedy 360 CO₂ laser with 80 W laser power, previously used in professional production. This machine is suitable for engraving and cutting a wide range of materials, including wood, acrylic, plastics, paper, leather, textiles, and similar materials. The working area of 813 × 508 mm enables efficient processing of standard formats as well as serial production with multiple parts per pass. The machine is equipped with InPack-Technology™, which reliably protects guides and optics from dust and dirt. Additionally, the system features an autofocus function for quick and precise adjustment of the focus height. The laser is in well-maintained condition appropriate to its age and is fully operational. The cutting grid and working area show normal, production-related signs of use. The machine has been regularly cleaned and maintained as part of a service contract. Technical Data • Laser source: CO₂ • Laser power: 80 W • Working area: 813 × 508 mm Codpoxz Ekhefx Afxopu • Focus: Autofocus • Protection system: InPack-Technology™ Scope of Delivery Trotec Speedy 360 CO₂ laser, 80 W Original price: €52,814.00 Honeycomb cutting table Inspection / Handover Inspection and powered demonstration available by appointment. Sale from current location. Shipping by arrangement.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, laserska moč: 600 W, vrsta hlajenja: voda, dolžina mize: 1.300 mm, širina mize: 900 mm, Oprema: CE označba, For cutting and engraving on wood, cardboard, leather, etc. Purchased new in 2021. In very good condition. Specially designed with two laser heads, one 600W and one 90W, allowing you to adjust the power, detail, and speed according to your project requirements. - The bed is designed to support a honeycomb structure for high structural stability as needed - Ruida control system: USB interface - Supported graphic formats: CorelDraw, AutoCAD, Photoshop Cpedpfx Ajxzrugefxeu - Stepper motor and Leadshine driver motion system - Supported file formats: BMP, PLT, DST, DXF, and AI - Digital control panel - Transparent viewing window with tinted eye protection allows you to monitor engraving progress at any time, and it can automatically cut power when opened. - An emergency stop button is available in case of issues. - Mobile wheels allow for easy movement - Front opening for larger projects Technical specifications: • Engraving area: 1300 x 900 mm • Laser power: SLW 600W and RECI 90W • Sealed CO2 laser tube • Maximum cutting speed: 0-600 mm/s • Maximum engraving speed: 0-1000 mm/s • Power supply: 220V±10% 50/60Hz Additional features: Sold with CW6200 chiller, honeycomb table, and submersible pump for mirror cooling. Includes spare 2” and 4” lenses.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, Oferta obejmuje kompletny przemysłowy system znakowania laserowego z serii TRUMPF TruMark – składający się ze źródła lasera TruMark 5000 oraz jednostki sterująco-zasilającej TruMark 5020. Seria TruMark gwarantuje precyzyjne, trwałe i wyraziste znakowanie na szerokiej gamie materiałów w środowisku przemysłowym. Oba urządzenia wyposażone są w oryginalne tabliczki znamionowe firmy TRUMPF i znajdują się w zadbanym stanie używanym. Dane techniczne TruMark 5020 – Jednostka sterująco-zasilająca Model: TruMark 5020 Zasilanie: 100–240 V, 50/60 Hz Pobór prądu: 7 A Moc: 600 W Stopień ochrony: IP54 Numer seryjny: L1150E2020 Rok produkcji: marzec 2018 Certyfikaty: CE, 21 CFR Chapter 1, Subchapter J TruMark 5000 – Źródło lasera Model: TruMark 5000 Numer seryjny: 0N510-2779-02 Długość fali: 1040–1200 nm Średnia moc wyjściowa (Po): ≤ 120 W Moc impulsu (Pp): ≤ 50 kW Czas trwania impulsu (t): ≥ 1 ns Zakres częstotliwości (F): ≤ 1000 kHz Cpedpfjxxp Eqox Afxju Norma: IEC 60825-1:2014 (Bezpieczeństwo laserowe)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, laserska moč: 60 W, vrsta hlajenja: zrak, skupna masa: 35 kg, trajanje garancije: 12 meseci, dolžina območja skeniranja: 220 mm, širina območja skeniranja: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Serial Production & Automation GLT – Grossmann Lasertechnik GmbH Made in Germany • Automated • Industry 4.0 Ready The Integra Fiber Laser is a fully integrated laser marking system for industrial series production, engineered for high cycle rates, precision, and process reliability. Cpodpfoxvtu Djx Afxeu Combining fiber laser technology, integrated PLC control, and a modular machine architecture, the Integra is ideal for production lines, custom-built equipment, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-Theta optics for maximum engraving speed • Work area: 100×100 mm to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: camera systems, pallet handling, conveyor integration • CE-certified, low-maintenance, suitable for continuous operation Advantages • Integration system “Made in Germany” – direct from the manufacturer • Custom machine engineering & automation to customer requirements • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminium, brass, plastics, and more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machine engineering Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation and commissioning across Europe • Lifetime after-sales support incl. remote maintenance

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 100 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 60 W, vrsta hlajenja: zrak, skupna masa: 135 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, dolžina območja skeniranja: 220 mm, širina območja skeniranja: 220 mm, potovalna razdalja osi X: 300 mm, Gravis Fiber Laser – Industrial Marking Laser Made in Germany | Automated & PLC Controlled The Gravis Fiber Laser is an industrial laser marking system for metal, plastic, nameplates, and serial numbers. Developed and manufactured in Germany, it combines maximum precision, robust mechanics, and flexible PLC control for 24/7 production operation. Technical Features • Power: 20 – 100 W • Galvo system with precise F-Theta optics • Working area: variable (100×100 mm up to 300×300 mm) • Integrated PLC with TCP/IP communication • Flexible software options: LightBurn / EZCAD / Beam Construct • CE-certified, low-maintenance, ready for immediate use — Advantages • Complete system “Made in Germany” – directly from the manufacturer • Custom machine construction & automation tailored to customer requirements • Integration into production lines (e.g., PLC or robot) • Perfect engraving results on stainless steel, aluminum, brass, plastic, tool steel, and more • German support, training & spare parts supply Delivery & Support • Delivery time: 4 – 6 weeks • Delivery, installation, and commissioning across Europe • Lifetime after-sales support Cpodpfxsxvtt Hj Afxou Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Tool and automotive industry • Electronics, plastics processing, promotional items • Jewelry engraving, precision engineering, contract marking