LvS-Plastic Machines GmbH & CoKG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Nkjdpfx Absydbbvjbet Tie bar clearance (h x v): 900 x 800 mm Mounting platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Maximum daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil quantity: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Stanje: rabljeno, Leto izdelave: 2017, Serial no. 141342-100, control unit Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould size 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, injection/metering unit manufactured by Wittmann, type Feedmax S3-NET, yr. 2021, sprue picker/robot by Wittmann, type WP80, yr. 2020, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 Nksdpfx Absyc Symobot This item is part of an online auction. The sale is subject to the approval of the seller.

Stanje: rabljeno, Leto izdelave: 2017, Ser.-No. 140228-100, control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle movement/force 350 mm/40 kN, injection/dosing unit, manufacturer Wittmann, type Feedmax S3-NET, year of manufacture 2017, sprue picker/robot, manufacturer Wittmann, type WP80, year of manufacture 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel, manufacturer Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 This item is part of an online auction. Acceptance of the bid is subject to the approval of the seller. Nkjdpfx Aeyc Stasbbjt

Stanje: rabljeno, Leto izdelave: 2017, Serial No. 138524-100, control system type Unilog B8, clamping force 1,100 kN, clear tie bar spacing 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, min. mould dimensions 296 x 296 mm, injection unit type 350, screw diameter 25 mm, screw stroke 175 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 85.9 - 220 cm³, specific injection pressure 1,595 - 3,000 bar, max. screw speed 350 rpm, screw torque 340 - 500 Nm, nozzle stroke/force 250 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2018, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, L 25 m, machine weight 4,800 kg, operating hours 42,853 Nsdpfxeyc Sqxe Abbokt This item is part of an online auction. Award will be made subject to the seller's approval.

Stanje: rabljeno, Leto izdelave: 2017, Ser.-No. 138522-100, Control unit: Unilog B8, Clamping force: 1,100 kN, Tie bar spacing (clear distance): 470 x 420 mm, Mold height (installation): 200 - 450 mm, Opening stroke: 380 mm, Max. platen daylight: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Max. mold weight: 1,000 kg, Min. mold dimensions: 296 x 296 mm, Injection unit: Type 750, Screw diameter: 35 mm, Screw stroke: 200 - 225 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Max. screw speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/force: 350 mm/40 kN, Dosing unit: Manufacturer Movacolor, Injection/Dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, year 2021, Sprue picker/robot: Manufacturer Wittmann, Type WP80, year 2021, Travel axes X/Y/Z: 100 x 550 mm x 90°, Pneumatic hose reel: Manufacturer Metabo, Type SA250, L 25 m, Machine weight: 5,200 kg, Operating hours: 36,180 This item is part of an online auction. Nkedpfx Asyc Snkobbst Awarding is subject to the consent of the client.

Stanje: rabljeno, Leto izdelave: 2017, Ser. no. 138264-100, Control system type Unilog B8, clamping force 1,800 kN, clear tie bar distance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, max. platen distance 1,030 mm, hydraulic/electric ejector stroke 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit manufacturer Movacolor, injection/dosing unit manufacturer Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot manufacturer Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel manufacturer Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038 This item is part of an online auction. Sale is subject to the approval of the client. Nodpfx Aoyc Sh Debbskt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse Njdpfsyc Ewxsx Abbekt - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 100 t Premer vijaka: 35 mm Razdalja med stebri (spredaj): 420 mm Razdalja med stebri (zadaj): 420 mm Prostornina izstrela: 144 cm3 Nsdoycvw Ajpfx Abbekt Tip: Horizontalni Pogon: Hidravlični Delovne ure: 46000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Nkedpfx Abjyctzfjbjt Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, vpenjalna sila: 4.000 kN, Oprema: dokumentacija / priročnik, Krmiljenje: CC200 Leto: 2013 Zapiralna sila: 400 t Maksimalna dnevna svetloba: 1450 mm Višina orodja min-maks: 450-1000 mm Izmetalni hod: 250 mm Premer polža: 70 mm (S8-polž G1) Prostornina brizganja: 1501 cm3 Količina vbrizga: 319 cm3/s Specifični tlak vbrizga: 2252 bar Maks. hitrost vrtenja polža: 160 rpm Tip: Horizontalno Pogon: Hidravlični 2 jedrna vleka 16 con za ogrevanje orodja 12 vodnih tokov Nksdpfxeyctyzs Abbjt Euromap 67 ECODRIVE ZRAČNI VENTILI

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2,000 bar Dosage Volume: 664 ccm Nksdsyctyuspfx Abbst Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1,510 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Controller with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter Highly precise rotary table, driven by servo motor and controlled by inverter Rotary table diameter: 1,500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor – mold pressure control Conversion of the injection unit for vertical operation is possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in a live technical test at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Nkjdpoyctyhsfx Abbot Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Njdsyctx Rjpfx Abbskt Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cm³ Nkedpfx Aboyctw Tsbst Clamping Unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 12 Injection unit hardened - bimetal Main machine motor - servo motor powered by inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder / accumulator with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven by servomotors (electric); axis C - pneumatic Travel range for axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and protective housing Purchase of robot and conveyor belt at an additional cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 570C 2000-350/150 / Production Line with Side-entry Arburg Multilift Robot / 2K-Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 40 mm Shot Weight: 153 g Injection Pressure: 2120 bar Dosage Volume: 182 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA Additional Equipment: Production line with side-entry Arburg Multilift robot 2K machine / two-component Air valve x 1 Hydraulic core pull x 5 Hot runner control Reinforced injection units – bimetallic Proportional valves on injection units – precise molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS Nedjyctwyopfx Abbskt All offered machines are started up and tested by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of Manufacture: 10/2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2,500 bar Dosage volume: 154 cc Clamping Unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 2K injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot runner control x 12 Reinforced injection units – bimetal Machine with two cylinders / batteries with compressed nitrogen (additional charge for high speed operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Nsdpeyctwgefx Abbekt Integrated Arburg conveyor belt and sorting chute Original Weber rotary table, very precise – electrically driven Purchase of rotary table and robot available for an extra charge Dimensions: Weight: 8,140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Njdpfx Ajyctwaebbjkt Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Njdeyctvpepfx Abbokt Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core pull control Injection unit hardened - bimetallic The screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total connected load: 27.9 kW All listed machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core pull control Injection unit hardened - bimetallic The screw diameter can be changed Dimensions: Weight: 4790 kg Nksdpfxeyctvie Abbst Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total connected load: 27.9 kW All listed machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Njdsyctu Eepfx Abbokt Additional equipment: Euromap 67 Robot interface Air valve x 1 Injection unit hardened - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 robot Year of manufacture: 2007 4-axis robot: 3 axes powered by servo motors (electric); C-axis Axis travel: X-420, Y-1200, Z-2000 mm Touch control panel Robot safety package Robot with adapter Purchase of the robot available at extra cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating capacity: 9.7 kW Total power: 28.2 kW All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection Unit: Screw diameter: 60 mm Shot weight: 427 g Injection pressure: 1,440 bar Dosage volume: 508 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Hardened – bimetallic injection unit Parallel movements Dimensions: Weight: 4,660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pump/Motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request Nksdpfeyctuxsx Abbot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Arburg 470C 1500-400 with Wittmann W721 Robot Year of manufacture: 12.2006 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 150 t Tie bar distance: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: Euromap 67 interface Robot interface Control unit with air valve Hydraulic core pull x 1 Nkedpeyctuljfx Abbst Injection unit hardened - bimetallic Integrated conveyor belt and sorting flap Wittmann W721 robot Year of manufacture: 2006 4-axis robot: 3 axes driven by servomotors (electric); C axis - pneumatic Axis travel range: X-550, Y-1200, Z-3000 Touchscreen control panel Safety package for robot Robot with adapter Robot purchase at additional cost Dimensions: Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 10.2 kW Total power: 28.7 kW All offered machines are started up by our service technicians before delivery. It is possible to receive a video of the technical testing of the selected machine or to participate in a live technical inspection at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Arburg 470C 1500-150/150 / 2K machine / Machine in very good technical condition Year of manufacture: 2005 Nksdpsyctufsfx Abbot Injection Unit: Screw diameter: 25 mm Shot weight: 49 g Injection pressure: 2,500 bar Dosage volume: 54 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional Equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Proportional valve on the injection unit – precise injection Injection unit type: Vario – offers the possibility to use the injection unit for e.g. side injection Parallel movements Vertical injection unit – screw diameter fi 25 mm (49 g/PS) It is possible to replace the screw diameter in both injection units with those recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5,700 kg Drive: Pump/Motor: 30 kW Heating power: 2 x 9.4 kW Total power: 48.8 kW All offered machines are started up by our service engineers prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 520S 1300-800 / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 ccm Clamping unit: Clamping force: 130 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 Hardened injection unit - bimetallic The machine has been regularly serviced by authorized Arburg service in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pump/motor: 30 kW Nodpfxsyctt Ue Abbokt All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Arburg 420C 1300-675 with Anguss Picker Star Year of manufacture: 2002 Injection Unit: Screw diameter: 50 mm Shot weight: 297 g Nodsycttzepfx Abbskt Injection pressure: 2080 bar Dosage volume: 353 ccm Clamping Unit: Clamping force: 130 t Tie bar distance: 420x420 mm Platen size: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened – bimetal Type of injection unit: Vario – enables e.g. side injection applications Operator-side covers open automatically Dimensions: Weight: 4,330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pump/Motor: 30 kW Heating power: 14.9 kW Total connected load: 44.9 kW All machines offered are run up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request