Habusch Maschinen GmbH

Stanje: rabljeno, Leto izdelave: 2025, Horizontal band saw with swiveling arm for metal cutting, allowing cuts perpendicular to the axis of the material as well as at any angle from 0 to 60º. The material can be fed manually or with any mechanical feeder, with automatic tool feed. The band guides are equipped with dedicated carbide plates and bearings, significantly improving blade guidance, service life, cut straightness, accuracy, and cut quality. The machine arm is made of profiled cast iron. The control panel is located next to the arm. Power transmission from the electric motor to the driving wheel is via a worm gear motor. The saw blade is tensioned across two cast iron wheels using a manual tensioner and guided by an adjustable rolling and linear carbide guide set. A separate coolant tank with an electric pump is located inside the machine. Arm lowering speed (cutting speed) is regulated hydraulically. Feed speed is controlled from the control panel. Two cutting blade speeds can be selected: 36 and 72 m/min. In the arm rest position (after completion of the cutting process), the blade drive is automatically switched off. Safety is ensured by saw blade covers and microswitches that stop the motor after the cutting cycle or when any covers are opened; additional safety is provided by automatic shutdown of the saw in case of blade breakage. Technical Data Bandsaw dimensions: 2455×27×0.9 mm Blade tension: mechanical (manual) Blade speed: 36, 72 m/min Feed speed: 0–50 m/min (stepless feed) Arm lowering control: stepless – hydraulic cylinder Vise base height: 900 mm Power supply: 3-phase 400 V Motor power: 1.1 kW Weight: 216 kg Warranty: 12 months Manual: yes CE declaration: yes Cutting Capacity Angle | ø Round | Rectangular | Square 0º | ø230 | 260×150 mm | 225×225 mm 45º | ø165 | 180×130 mm | 165×165 mm 60º | ø105 | 100×90 mm | 110×110 mm *Please note: The machine is by default supplied without a CEE connector due to the variety of types. If you would like it delivered with a connector, please contact the seller before purchasing/when placing your order. NOTE! MACHINE IS A RETURNED, REFURBISHED UNIT, NO PACKAGING. Hodpfxexn Itro Ah Djnu

Stanje: rabljeno, Leto izdelave: 2012, Schnittdurchmesser 290 mm Schnittbereich bei 90 Grad: flach 320 x 290 mm Schnittbereich bei 45 Grad: flach 240 x 150 mm Schnittbereich bei 45 Grad: rund 240 mm Schnittbereich bei 60 Grad: flach 150 x 180 mm Hodpfxsxiyzke Ah Donu Schnittbereich bei 60 Grad: rund 150 mm Drehzahlbereich: 35 + 70 m/min Sägebandlänge 3100 x 27 x 0.9 mm Maschinengewicht ca, 540 kg Abmessung L-B-H 1800 x 950 x 2100 mm Ausstattung: - robuste elektro-hydraulische Bandsäge (INDUSTRIE) - geeignet für Einzel- und Kleinserienfertigung - großer gelagerter Drehtisch * für Gehrungsschnitte von 45° links bis 60 ° rechts - automatische Sägebügelabsenkung * mit stufenlos einstellbarem Vorschub * Endabschaltung bei Schnittende - 2x Sägebandgeschwindigkeiten - manuelle Schraubstockspannung - Bedienpult - vorne rechts - Kühlmitteleinrichtung - Bedienungsanleitung auf Deutsch

Stanje: novo, Leto izdelave: 2025, Standard Equipment of the MEBAbase 32A Fully automatic bandsaw with partial enclosure for safe, clean, and quiet operation Torsion-resistant welded construction for high stability and long service life Side band guide combining pre-tensioned carbide sliding guides and band twist rollers Hydraulic saw feed Infinitely adjustable saw feed speed from 1–300 mm/min Continuous cut pressure and feed monitoring with automatic adjustment in case of excessive cutting pressure Infinitely variable cutting speed from 10–80 m/min Large-capacity coolant tank (approx. 90 liters) Automatic band breakage monitoring with machine shutdown in case of band breakage Hydraulic saw blade tensioning Powered round brush for optimal tooth edge cleaning Automatic material feed with hydraulic full-stroke clamping Stable, linear-guided feed vice for highest positioning accuracy Integrated material end detection Feed vice can be opened to both sides Enclosed roller track with ball-bearing precision rollers Convenient disposal chute for cut parts, inclined for coolant return Robust panel controller with touchscreen, menu-guided, intuitive symbol navigation Fully automatic sawing process for any length and quantity Simple program creation and management Chip conveyor included as standard Technical Data Type: Straight-cut saw 90° Max. cutting area width ↔ (mm): 320 Hjdpfxsxdv Rds Ah Donu Max. cutting area height ↕ (mm): 320 Max. cutting diameter Ø (mm): 320 Cutting materials: Tube, round solid material, square tube, square solid material Motor [kW]: 5 Saw blade [mm]: 4115 x 34 x 1.1 Blade speed [m/min]: 10–80 Dimensions (LxWxH) [mm]: 2250 x 2300 x 1700 Weight [kg]: 2000 Working height [mm]: 830 Feed length per single stroke [mm]: 500 Degree of automation: Series cutting Options / Additional Equipment Additional chip conveyor or custom chip brush solutions Enhanced coolant systems Customizable cut line indicator (laser) Installation elements as required Technical modifications reserved. The machine is sold within the scope of statutory warranty obligations. You will receive exact delivery time information in your order confirmation.

Stanje: novo, Leto izdelave: 2025, S275 Metal Cutting Machine Hsdpfx Asxdbzbeh Denu Motor type: Three-phase induction motor Connection: 400 V 50/60 Hz Power supply: 400 V (three-phase) Protection class: IP54 Power: 1.5 HP (1.1 kW) Rated current: 400 V (3.6 A) Speed (RPM): 50 Hz: 2840/1420 Gearbox: Gear ratio: 50 Hz: 1:30 Bandsaw Blade dimensions: 2480 x 27 x 0.9 x 6–10 mm Diameter of blade guide wheel: 293 mm Blade speed: 50 Hz: 45/90 m/min Cooling system pump: Type: 230 V, 100 W Rated current: 0.3 A Speed: 50 Hz: 2840 RPM Tank capacity: 10 liters Mechanical data Dimensions with base: 1560 x 990 x 1665 mm Dimensions without base: 1320 x 510 x 755 mm Shipping dimensions: 1380 x 570 x 890 mm Weight: Net: 185 kg | Gross: 200 kg Noise level: 70 dB Fuse: max. 16 A Ambient temperature: 5–35 °C Air humidity: 25–80 % General: Cutting angle adjustment: via swivel arm Blade guide: ball-bearing guide rollers Saw arm lift: manual Feed: infinitely variable Blade tensioning: manual via handwheel Band guides with bearings and carbide plates Height from floor to vice: 910 mm

Stanje: rabljeno, Leto izdelave: 1970, Premer reza 250 mm Dolžina tračne žage 3660 mm Hedpfx Aexc Nwush Donu Širina reza 1,3 mm Obseg vpenjanja (dolžina) 450 mm Obseg vpenjanja (višina) 250 mm Hitrost rezanja 20 - 70 m/min Rezanje sila nastavljiva brezstopenjsko Poševni rezi - na obeh straneh 45° Napetost 380 V Frekvenca 50 Hz Pogonska moč 0,55 kW Teža stroja cca 0,7 t Potrebni prostor cca 1,5 x 1,0 x 1,6 m Naprava za hlajenje,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Manual high-performance band saw for metal, with the option to choose between manual and hydraulic lowering of the saw frame. In autonomous operation, the lowering speed can be continuously adjusted using the "Push&Pull" controller. By pulling the controller, the frame maintains the previously selected speed and does not need to be reset for subsequent cuts. Standard Equipment: - Saw frame made of robust cast construction - Heavy-duty round table with cutting channel for mitre cuts from 0°–60° right and 0°–45° left - Adjustable vice with resettable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze wheel and hardened, ground steel worm - Electric coolant pump for lubrication and cooling of the saw blade - Mechanical saw band tensioning with electric blade monitoring - Precise band guidance over adjustable, ground carbide plates and ball bearings Hnsdpfx Ahsxcnqaj Dou - "Push&Pull" regulator for adjustment of lowering speed - Rotating chip removal brush - Precise angle scale for angles from 60° right to 45° left - Control panel with operation indicator lamp, main/speed selector, and selector switch for manual or autonomous lowering - Emergency stop button at knee height for optimal accessibility - Microswitch in the handle for starting the motor and pump - "Dead man's switch" function in manual mode - Safety switch on the saw frame protection cover and band tensioning slide - Limit switch for automatic motor cut-off at the end of the cut - Length stop for repeat cuts - Material support on infeed side - Bi-metal saw blade - Tools and operating manual Technical Specifications: * Dual-speed 400V three-phase motor, 1.1/1.5 kW * 2 cutting speeds (33/66 m/min) * Vice clamping width: 305 mm * Working height: 940 mm * Saw band dimensions: 2750x27x0.9 mm * Weight: 380 kg Cutting capacity in mm: 90° 255 250x250 300x200 45° R 190 180x180 190x170 60° R 110 110x110 150x110 45° L 160 140x140 170x120

Stanje: rabljeno, Leto izdelave: 2013, Cutting diameter: 250 mm Cutting range at 90 degrees (flat): 250 x 450 mm Cutting range at 45 degrees (round): 190 mm Cutting range at 45 degrees (square): 250 x 190 mm Table height: approx. 650 mm Saw band length: 3300 mm Saw blade dimensions: 3300 x 27 x 0.9 mm Cutting speed: 21 - 62 m/min Total power requirement: 1.5 kW Machine weight: approx. 320 kg Space requirement: approx. 1739 x 571 x 1130 mm Very rarely used (!!) Equipment: - Electro-hydraulic horizontal bandsaw - Precision saw band guide - Infinitely variable band speed - Infinitely adjustable feed rate for the saw frame - Heavy cast construction - Manual quick-action material clamping - Adjustable settings for mitre cuts - Spare saw bands - Coolant system * Machine link: ?machineno=1008-9173350 Hnsdpfxoxab Efe Ah Dju

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Hnjdpfx Ahoxabpwj Deu Space requirement: approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 220 mm Cutting range at 90°: square 210 x 210 mm Cutting range at 90°: flat 230 x 185 mm Cutting range at 45°: round 150 mm Cutting range at 45°: square 150 x 150 mm Cutting range at 45°: flat 150 x 210 mm Cutting range at 60°: round 90.0 mm Cutting range at 60°: square 90 x 90 mm Cutting range at 60°: flat 90 x 100 mm Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting speed: 35 / 70 m/min Working height: approx. 900 mm Total power requirement: 1.2 kW Weight: 240 kg Dimensions (L x W x H): 870 x 1550 x 1740 mm Features: - Compact, robust manual band saw (HOBBY / INDUSTRIAL) * Suitable for cutting solid material and profiles - Mitre cuts up to 60° to the left possible - 2 selectable cutting speeds (37 and 74 m/min) - Infinitely variable feed rate of the saw bow - Automatic shut-off at the end of the cut - Manual quick-release vice, incl. quick-release lever - Machine base - Coolant system - Operating manual BERG SCHMID Auto-Cut-System = 3-step system: 1. Automatic lowering & automatic sawing operation 2. Manual operation – lowering & sawing operation 3. Rapid lowering mode of the saw frame – without sawing Hedsxabbgopfx Ah Djnu

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Table height: 910 mm Cutting range at 90° (flat): 245 x 150 mm Cutting range at 90° (square): 200 x 200 mm Cutting range at 45° (round): 160 mm Cutting range at 45° (square): 160 x 160 mm Cutting range at 60° (round): 100 mm Cutting range at 60° (square): 100 x 100 mm Speed range: 45/90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Features: - Suitable for cutting profiles, tubes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for miter cuts - Stepless lowering control via hydraulic descent cylinder Hsdsxaa Tbepfx Ah Djnu - Torsion-resistant, heavy-duty saw arm made of cast iron - 2-band speeds for optimal cutting results (400 V) - Robust construction for smooth and low-vibration operation - Automatic cut-off after material is fully cut - Heavy-duty cast-iron vise with quick-release mechanism - Ball-bearing saw blade guide with quick adjustment to adapt to the workpiece width ensures optimal working results Scope of delivery: - Saw blade - Workpiece stop - Base frame - Pressure gauge for blade tension - Vise with quick-release mechanism - Coolant device - Hydraulic descent cylinder - Motor protection switch - Automatic cut-off

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90° (flat): 280 x 200 mm Cutting range at 90° (square): 230 x 230 mm Cutting range at 45° (round): 190 mm Cutting range at 45° (flat): 180 x 180 mm Cutting range at 45° (square): 180 x 180 mm Cutting range at 60° (flat): 110 x 110 mm Cutting range at 60° (square): 110 x 110 mm Cutting range at 60° (round): 120 mm Vice opening: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic lowering of the saw bow * With infinitely adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x band saw speeds - Carbide blade guides - 1x saw blade - 1x angle stop Hodpfx Ahsxaa H Io Djnu - Integrated chip cleaning brush - Operator panel - front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing unit

Stanje: novo, Cutting diameter: 225 mm Cutting capacity at 90° (flat): 245 x 150 mm Cutting capacity at 90° (square): 200 x 200 mm Cutting capacity at 45° (flat): 160 x 140 mm Cutting capacity at 45° (round): 160 mm Cutting capacity at 45° (square): 140 x 140 mm Cutting capacity at 60° (flat): 110 x 80 mm Cutting capacity at 60° (square): 90 x 90 mm Cutting capacity at 60° (round): 90 mm Vice opening: 245 mm Blade speed range: 46/92 m/min Saw blade dimensions: 2450 x 27 x 0.9 mm Hjdpsxaa Dyjfx Ah Djnu Total power requirement: 1.5/1.8 kW Machine weight: approx. 240 kg Space requirement: approx. 1,530 x 900 x 1,720 mm Equipment: - Compact, robust manual bandsaw - Single-sided mitre device up to 60° to the left - Hydraulic lowering of the saw bow * Infinitely variable feed adjustment * Automatic shut-off at end of cut - 2x bandsaw speeds - Carbide-tipped blade guides - Manual vice with quick-release - Machine stand - Coolant system - Manual blade tensioning (star knob at the front) - 1x angle stop - 1x metal bandsaw blade - Operating manual

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Features: - Rugged electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate Hnodpsxaarkjfx Ah Deu * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides with carbide inserts - 1x saw band - 1x angle stop - Integrated chip removal brush - Control panel – front right - Hydraulic pressure cylinder for saw band tensioning * With analog pressure gauge (manometer) - Machine base with forklift slots - Coolant system - Operating manual in German

Stanje: novo, Cutting diameter: 225 mm Cutting capacity at 90°: flat 245 x 150 mm Cutting capacity at 90°: square 200 x 200 mm Cutting capacity at 45°: flat 160 x 140 mm Cutting capacity at 45°: round 160 mm Cutting capacity at 45°: square 140 x 140 mm Cutting capacity at 60°: flat 110 x 80 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 60°: round 90 mm Vice width: 245 mm Blade speed range: 46/92 m/min Saw blade dimensions: 2450 x 27 x 0.9 mm Total power requirement: 0.7 / 0.81 kW Machine weight approx. 265 kg Features: - Compact / robust manual bandsaw - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Hydraulic lowering of the saw bow * Stepless feed adjustment * Automatic cut-off at stroke end - 2x saw blade speeds - Carbide blade guides - Manual vice with quick-action clamping - Machine base - Coolant system - Manual blade tensioning (star grip at the front) - 1x angle stop - 1x metal saw blade - Operating manual Hsdpfoxaaciex Ah Donu

Stanje: novo, Leto izdelave: 2025, Professionelle, sehr leistungsstarke und effiziente Metallbandsäge mit 45° schwenkbarem Sägebügel. Die perfekte Lösung für Schlossereien, Produktionsbetriebe und Handwerkswerkstätten. Seit vielen Jahren unerreicht - die Konstruktion und die massive Bauweise machen sie zur idealen Wahl. Maschinenbeschreibung Die professionelle und äußerst leistungsfähige Metallbandsäge mit 45° Schwenkarm, CORMAK BS 712 SW, basiert auf ausgereiften Lösungen und ist in ihrer Klasse konkurrenzlos. Der aus geformtem Sphäroguss gefertigte Sägebügel sorgt für Steifigkeit während des Betriebs und absorbiert sämtliche Vibrationen. Das Bedienfeld ist am Sägebügel angebracht. Die Maschine besticht durch hohe Effizienz und eine unkomplizierte Bedienung. Sie ermöglicht Schnitte in der Vertikalebene sowie in der zur Achse des Schnittmaterials senkrechten Ebene oder unter jedem beliebigen Winkel im Bereich von 45° bis 90°. Das Werkstück kann manuell oder durch eine beliebige Zuführeinrichtung zugeführt werden. Der Vorschub erfolgt während des Schneidens gravitationsgesteuert nach dem Prinzip des Ölflusses in einem zweikammerigen Hydraulikzylinder. Die passende Senkgeschwindigkeit des Sägebügels wird durch ein Ventil reguliert, das den Ölfluss zwischen den Zylinderkammern steuert. Die robuste, stabile und präzise Bauweise sowie der durchgehende Guss-Sägebügel gewährleisten hohe Steifigkeit und Stabilität beim Schneiden und somit Genauigkeit und langfristige Zuverlässigkeit. Das für die Maschine verwendete 20 mm breite Sägeband ermöglicht das Schneiden großer Stückzahlen. Die erforderliche Bandschnittgeschwindigkeit wird durch das Übersetzungsverhältnis der Riemenscheibe zwischen Schneckengetriebe und Antriebsmotor eingestellt. Technische Daten: Motorleistung: 1,1 kW Bandschnittgeschwindigkeiten: 22/33/45/65 m/min Stromversorgung: 400 V Bandabmessungen: 2360 × 20 × 0,9 mm Schnittbereich: 45°L – 45°R Gewicht: 145 kg Abmessungen: 1280 × 575 × 1140 mm Schnittkapazität: Winkel 0°.....Ø 205.....215×205.....205×205 Hodpsw U Skvsfx Ah Djnu 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 Der angegebene Preis ist ein Nettopreis. Versandkosten sind nicht im Preis enthalten. Für weitere Informationen kontaktieren Sie uns bitte telefonisch oder per E-Mail. Unser vollständiges Angebot finden Sie auf unserer Webseite.

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 1430 91, Technical specifications Cutting diameter: 260 mm Saw band length: 3660 mm Cutting width: 0.9 mm Cutting capacity – square: 260 x 260 mm Feed length: 500 mm Feed length (multiple): up to 5,999 mm Hnedpfx Ahjw Eua Aj Deu Cutting speed: 17 – 106 m/min Saw band dimensions: 3660 x 25 x 0.9 mm Saw motor: 1.5 kW Total power requirement: 2 kW Machine weight: approx. 1.05 t Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m Accessories Coolant Specifications according to manufacturer

Stanje: rabljeno, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Hnedpfx Aswzzgnsh Deu Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Stanje: novo, Leto izdelave: 2022, Cutting diameter: 230 mm Hedpfowp Tmijx Ah Denu Saw band length: 2730 mm Cutting width: 320 mm Round material: 230 mm Flat material: 320 x 130 mm - New machine - - Double mitre saw - (Item no. 105126) * For more information regarding the exact standard equipment and available options, please visit our website or contact us directly by phone. *

Stanje: rabljeno, Leto izdelave: 2025, Piła taśmowa do metalu, z optymalnym zakresem cięcia, powszechnie stosowana w stolarstwie, zakładach produkcyjnych i rzemieślniczych. Opis maszyny Uniwersalna piła taśmowa do metalu CORMAK BS 712 A z certyfikatem CE to sprawdzone rozwiązanie do cięcia metalu, niezawodne od lat. Charakteryzuje się wysoką wydajnością oraz łatwą obsługą. Umożliwia cięcie w płaszczyźnie pionowej i prostopadle do osi ciętego materiału, jak również pod kątem w zakresie 45°–90°. Element przeznaczony do cięcia może być podawany ręcznie lub za pomocą dowolnego podajnika. Posuw w trakcie cięcia odbywa się grawitacyjnie, na zasadzie przepływu oleju w dwukomorowym siłowniku hydraulicznym. Dzięki zaworowi regulującemu przepływ oleju między komorami siłownika uzyskuje się odpowiednią prędkość opuszczania ramienia. Wymagana prędkość liniowa taśmy uzyskiwana jest poprzez zmianę przełożenia na przekładni pasowej między przekładnią ślimakową a silnikiem napędowym. Wytrzymała, stabilna i dopracowana konstrukcja oraz ramię wykonane z jednolitego żeliwa zapewniają wysoką sztywność i stabilność podczas cięcia, gwarantując precyzję oraz długą żywotność urządzenia. Dzięki konstrukcji taśmy tnącej 20 mm możliwa jest efektywna obróbka dużej ilości elementów. Dane techniczne Hnedpfx Aewl Ea Toh Dsu Rozmiar taśmy tnącej: 2360×27×0,9 mm Napięcie taśmy: mechaniczne (ręczne) Prędkości taśmy: 22, 33, 45, 65 m/min Posuw: 0–50 m/min (bezstopniowy) Sterowanie opuszczaniem ramienia: bezstopniowe – siłownik hydrauliczny Zasilanie: 3-fazowe 400V Moc silnika głównego: 1,1 kW Masa: 190 kg Kąt 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Konstrukcja maszyny Układ napędowy taśmy tnącej składa się z dwóch kół żeliwnych. Pierwsze koło to koło napinające (regulacja dźwignią), drugie to koło napędowe. Moment obrotowy z przekładni ślimakowej przekazywany jest bezpośrednio na koło napinające, a sama przekładnia ślimakowa napędzana jest silnikiem elektrycznym. Odpowiedni kąt ustawienia taśmy zapewnia zespół łożysk tocznych. Podstawę maszyny stanowi sztywna bryła stalowa, wewnątrz której znajduje się zbiornik na ciecz chłodzącą z pompą chłodziwa zalewowego. Dzięki obrotowemu imadle możliwe jest cięcie materiału w zakresie kątów 0°–45°. Na górnej części maszyny zamontowane są zbiornik na ciecz odprowadzającą oraz pojemnik na wióry. Do zbiornika przymocowany jest żeliwny stół roboczy z imadłem do mocowania materiału oraz z ramieniem piły taśmowej. W dolnej części podstawy znajdują się otwory na osie kół jezdnych. Bezpieczeństwo podczas pracy zapewnia instalacja elektryczna spełniająca wszystkie wymagania CE. Maszyna wyposażona jest w wyłącznik krańcowy zatrzymujący piłę po zakończeniu cięcia, przycisk awaryjny, szereg mikroprzełączników odłączających zasilanie w przypadku otwarcia np. osłony przekładni pasowej czy osłony taśmy tnącej. Dodatkowo, w odróżnieniu od konkurencyjnych maszyn, jest wyposażona w szczotkę drucianą do czyszczenia taśmy, co zapobiega blokowaniu ostrza i zapewnia skuteczniejsze cięcie. UWAGA! DOSTĘPNE 3 SZTUKI: 1. MASZYNA ZWROCONA, SERWISOWANA, ZLOZONA (poz. 519) 2. MASZYNA ZWROCONA, BRAK OPAKOWANIA, WGNIECIONA OSŁONA SILNIKA, KOMPLETNA, ZLOZONA (poz. 518) 3. MASZYNA ZWROCONA, BRAK OPAKOWANIA, WGNIECIONA OSŁONA SILNIKA I PASÓW, ZLOZONA (poz. 517)

Stanje: rabljeno, Leto izdelave: 2020, Cutting diameter: 250 mm Saw band length: 3100 x 27 x 0.9 mm Cutting range at 90 degrees (square): 220 mm Cutting range at 90 degrees (flat): 280 x 190 mm Band speed: 37 / 74 m/min Hnedpfx Ahjwkvq Ho Dju Saw motor: 1.5 kW Machine weight: approx. 0.5 t Space requirement: approx. 1.6 x 1.4 x 1.3 m Mitre band saw - Semi-automatic - Double mitre - Material detection during lowering

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Hsdpowirpvofx Ah Denu Država izvora Italija Cena 8680 € Leasing obrok 167,52 € Žagin okvir vrtljiv Dimenzije žaginega traku 3120x27x0,9 mm Hitrost traku 35/70 m/min Kapaciteta reza 0° okroglo 280 mm Kapaciteta reza 0° kvadratno 240 mm Kapaciteta reza 0° ploščato 370x140 mm Kapaciteta reza 45° okroglo 225 mm, kvadrat 215 mm Kapaciteta reza 60° okroglo 140 mm, kvadrat 140 mm Delovna višina 830 mm Dolžina 1550 mm Širina 1400 mm Višina 1900 mm Teža 353 kg Ročni primež s hitrim zapiralnim ročajem Spuščanje z lastno težo z nastavljivim dušilcem 2 hitrosti Naprava za hlajenje MOŽNOSTI: Valjčne proge in žagini trakovi na zahtevo

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock no.: 6242 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €5,400 Available in stock: 1 Saw frame: pivoting frame Saw blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 35 / 70 m/min Cutting capacity 0° round: 220 mm Cutting capacity 0° square: 220 mm Cutting capacity 0° flat: 260 x 140 mm Cutting capacity 45° round: 160 mm, square: 155 mm Hjdpfx Ahewiqpze Denu Cutting capacity 60° round: 95 mm, square: 95 mm Working height: 965 mm Length: 1200 mm Width: 1100 mm Height: 1860 mm Weight: 240 kg Demo machine / like new condition Net price (original price €6,730.00) Manual vice with quick-clamping lever Descent by dead weight with adjustable damper 2 speeds Coolant system OPTIONS: Roller conveyors and saw blades available on request

Stanje: novo, Cutting diameter: 260 mm Saw band length: 2455 mm Maximum cutting width: 260 x 200 mm Saw band dimensions: 2455 x 27 x 0.9 mm Cutting angle: 0 – 60° Drive power: 0.75 / 1.1 kW Cutting speed: 34 / 68 m/min Table height above floor: 900 mm Machine weight: approx. 220 kg Space requirement: approx. 1.45 x 0.72 x 1.05 m NEW MACHINE PRICE: €1,990.00 plus VAT - Automatic hydraulic feed with flow control valve - Quick-release vice - Quick-action angle clamp - Angle scale - Oil bath for continuous lubrication - Cooling system with electric pump - Precision bearing band wheels - Saw band tracking adjustment Hnedpfx Ahowc D Azo Dsu - Saw band tensioner with disc spring assembly - Safety end switch for saw band monitoring - Adjustable front saw band guide - Adjustable front/rear tension bearings - Chip brush - Auto-OFF shut-off function - Saw frame with tapered roller bearings - Sheet steel base with chip tray

Stanje: rabljeno, Leto izdelave: 1994, Semi-automatic horizontal bandsaw for solid materials and profiles Cutting capacity up to approx. Ø 260 mm Hnodpfx Ahjwbfhce Dou Robust cast iron construction Manual feed and hydraulic cutting cycle Swiveling saw head for miter cuts Integrated coolant system Ideal for workshops and industrial use

Stanje: novo, Leto izdelave: 2025, Cutting diameter: 240 mm Saw blade length: 2910 x 27 x 0.9 mm Cutting width: 310 mm Table height: 900 mm Cutting speed: 35 + 75 m/min Total power requirement: 1.1 / 1.8 kW Machine weight: approx. 470 kg Space requirement: approx. 800 x 1720 x 1450 mm Standard features of the MEBAbase 24 DG-HS: - MEBA mitre system: Large, swiveling table prevents saw cuts into the material support surface – reduced wear costs! Material is always clamped at a right angle close to the saw blade. - Manual mitre adjustment from 90° to 30°, steplessly adjustable via scale, with 1.0° accuracy - Mitre rotation point is the intersection of the saw blade and material stop, so no change in length occurs when the angle is changed - End stops at 30° – 45° – 90° – 45° - Hydraulic material clamping. Material is always clamped parallel at 90°, regardless of saw frame angle - Centralized machine control - Cutting pressure reduction via own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section, using hydraulic damping cylinder and counterbalance spring - Saw blade drive with automatic end stop - Infinitely adjustable clamping jaws - Movable blade guide arm, adjustable to material width - Saw blade deflection rollers with carbide guides Hsdpfx Aswa Ui Tsh Donu - Practical chip tray with drip screen - Permanently engaged chip cleaning brush - Mechanical saw blade tensioning - Operating manual and spare parts list (digital) - 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine - Complete coolant system - Paint finish anthracite (RAL 7016)