Volker Gross Werkzeugmaschinen GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, hitro pomikanje X-os: 70 m/min, hitri pomik os Y: 70 m/min, hitri pomik na osi Z: 40 m/min, hitrost pomika os X: 70 m/min, hitrost podajanja osi Y: 70 m/min, hitrost podajanja os Z: 40 m/min, vrtilni moment: 12 Nm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 640, širina mize: 3.000 mm, višina mize: 80 mm, dolžina mize: 2.000 mm, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 15.000 W, Mise en service : 2019 Commande : Heidenhain iTNC 640 avec molette manuelle Axe X : env. 3 000 mm Axe Y : env. 2 000 mm Axe Z : env. 1 250 mm Axe A : ± 96° Axe C : ± 270° Table de serrage : 3 000 x 2 000 x 80 mm, rainures en T 18H12 / 250 mm Tête de fraisage 2 axes Puissance broche : 15 kW Vitesse broche : max. 24 000 tr/min Couple : max. 12 Nm Porte-outil : HSK 63F Bjdpfoyrdnnex Afnewi Entraînements axes linéaires Vitesse d’avance X, Y et Z : jusqu’à 70 m/min / 40 m/min Données de raccordement Tension : 400 V Fréquence : 50 Hz Préfusible : 63 A Puissance requise : 35 kW Dimensions, poids Poids total : env. 15 000 kg Équipements complémentaires - Lubrification quantité minimale - 2x changeur d’outils 12 positions - Enceinte de la zone de travail Équipements en option avec supplément : - Mesure d’outil laser Blum - Installation d’aspiration État de la machine Entièrement fonctionnelle, en très bon état. Visible sous tension.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Immediately available: Gantry Milling Machine FS 1200 • Total travel X=12,000 mm – ideal for flexible large-part machining • Travel axes: X=12,000 mm, Y=1,500 mm, Z=3,500 mm • Control: iTNC 530 with wireless HR 550 FS handwheel, operator cabin mounted on gantry • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS (Internal Coolant Supply) air up to 6 bar • Dust protection packages for guiding rails and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor at the rear of the unit • Process monitoring ToolScope basic system • Additional control panel at the rear of the unit • Partial enclosure consisting of work area and steel door, rear with safety fence and unobstructed view into the working area • Including leveling pads • Chiller units • Including internal tool cooling (closed cooling circuit) with chiller unit • Short delivery time, immediately available, ---subject to prior sale--- Bsdpfx Afeyrdfyjnswi Inspection by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, obratovalne ure: 10.356 h, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, nazivna (navidezna) moč: 44 kVA, proizvajalec krmilnikov: Heidenhain TNC 430, teža obdelovanca (maks.): 5.000 kg, skupna višina: 4.200 mm, skupna dolžina: 7.900 mm, skupna širina: 8.800 mm, hitrost vretena (min.): 10.000 obr/min, Year of manufacture: 2001 CNC control: Heidenhain TNC 430 Axes Travel X-axis mm: 1800 Travel Y-axis mm: 2000 Travel Z-axis mm: 1100 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 NC milling/turning table: Pallet dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Max. spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 Tool changer type: Double gripper Chip-to-chip time sec.: 13.5 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Rinsing gun Operating mode 4 Tool breakage detector Bsdpfx Aoyq Rpcofnewi Machine operating hours: Hours powered on: 10,356 Spindle operating time: 6,223 Base machine: Dimensions/weight Length mm: 7,900 Width mm: 8,800 Height mm: 4,200

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 51.775 h, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, nazivna (navidezna) moč: 44 kVA, proizvajalec krmilnikov: Heidenhain iTNC 530, teža obdelovanca (maks.): 4.000 kg, skupna višina: 3.500 mm, skupna dolžina: 7.500 mm, skupna širina: 7.700 mm, dolžina mize: 1.500 mm, skupna masa: 35.000 kg, hitrost vretena (min.): 10.000 obr/min, Year of manufacture: 2006 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 1600 Travel Y-axis mm: 1250 Travel Z-axis mm: 1000 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: 0–190º Feed rates m/min: 60 Rapid traverse m/min: 60 NC milling/turning table: Pallet dimensions mm: Ø1500 x 1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Max. spindle speed rpm: 10,000 Spindle drive power kW: 44/32 (40/100% duty cycle) Spindle torque Nm: 288/187 (40/100% duty cycle) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 980 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 Tool changer type: Double gripper With free adjacent slots mm: 250 With occupied adjacent slots mm: 130 Max. tool length mm: 650 Max. tool weight kg: 30 Chip-to-chip time sec.: 6 Equipment Chip conveyor Infrared probe Rotary viewing windows Rinsing gun Operating mode 4 Compressed air through spindle center selectable via M-function Machine operating time: Hours powered on: 98,398 Bwsdpfjyq Rm Iox Afnsi Spindle operating hours: 51,775 Total power requirement kVA: 96.2 Base machine: Dimensions / Weight Length mm: 7,500 Width mm: 7,700 Height mm: 3,500 Weight kg: 35,000

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: X-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm Pendulum machining right, fixed table X = 925 mm Pendulum machining left, 2-axis table X = 780 mm Control: Heidenhain TNC 640 Tool magazine: 122 SK 40 Infinitely variable spindle speeds: 12,000 rpm Spindle torque: 120 Nm Drive power: 22 kW Fixed table dimensions: 920 x 540 mm Table load, fixed table: 2000 kg Max. workpiece size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load, rotary table: 500 kg B-axis swivel angle: -90°/+110° Workpiece size, rotary table: 600 x 500 x 400 mm Bedpfxsyqyfgj Afnewi Workpiece dimensions across both tables: 1500 x 500 x 400 mm Internal coolant supply: 70 bar Machine weight approx.: 10.5 t Space requirements approx.: 3.65 x 2.53 x 2.81 m Accessories: Removable handwheel HR 510 FS Rotoclear viewing window Automatic shut-off at end of program Workpiece measurement with Blum TC 52 probe Coolant gun at workplace The Spinner U5 1530 5-axis machining center with Heidenhain TNC 640 control is nearly new and in excellent condition. 122 SK 40 tool holders are included. A special Gressel vise for 5-axis machining on the rotary table is also included. The B and C axes feature a hydraulic brake for increased rigidity during static machining. All linear and rotary axes are equipped with direct measuring systems. "Advanced Function Set 1" Option 8: - Swiveling the machining plane through coordinate transformation - Cycles for cylindrical surface interpolation (cycles 27, 28, 29, and 39) - Mapping a contour programmed in the X-Y plane onto the cylindrical surface - Automatic feed rate calculation in mm/min for a rotary axis depending on the tool's distance from the rotary center (M116) - Three-axis interpolation for spatial circles in a swiveled machining plane "Active Chatter Control" Option 145: Increased material removal rate

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.990 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0903, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, Pomik osi: 3000 x 800 x 1100 mm (X-Y-Z) Krmilnik Heidenhain iTNC530 Ročni kolesni upravljalnik 48 orodij v verigi Bwjdpfx Afoyqx N Dsnsi Vreteno z motorjem 12.000 vrt/min / 30 kW / 198 Nm Vpenjanje orodja HSK63 Neposredni merilni sistemi na vseh oseh Notranje hlajenje pod tlakom 20 bar s trakom filtrom, prostornina 450 litrov Namizni NC vrtljivi stroj za navpično/ležečo uporabo, premer 500 mm 3D merilna sonda Renishaw Orodna sonda Renishaw Novo motorno vreteno, nov kroglični navoj osi X, poravnana geometrija, velika servisna opravila.

Stanje: dober (rabljeno), Leto izdelave: 2015, Velikost mize 950 x 800 mm, nosilnost mize 1.000 kg, pomiki X Y Z 1.000 x 900 x 700 mm, os B -5/+110 stopinj, os C 360 stopinj, hitri pomiki 80 m/min, menjalnik orodij s 60 postajami, konus vretena HSK 63, hitrost vretena 18.000 vrt/min, upravljanje Heidenhain TNC 530, transporter za ostružke, hlajenje skozi vreteno. Bedpfx Afoyqxduonjwi

Stanje: rabljeno, Leto izdelave: 2001, x-Weg 2000 mm y-Weg 1200 mm z-Weg 1400 mm Steuerung Heidenhain 426 Nummer: Maschinennummer 3112 Tisch 1800x1200 mm Drehzahl 3000 U/min Spindelaufnahme ISO 50 Werkzeugwechsler 20 Positionen Fräskopf mit stufenloser Positionierung in der B-Achse 2x Späneförderer in Längsrichtung, Auswurf links Vollverkleidung Die technischen Daten stammen vom Hersteller bzw. Betreiber und sind daher für uns unverbindlich. Zwischenverkauf vorbehalten; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns: - Mehr als 400 eigene Maschinen auf Lager - Über 15.000 m² Lagerfläche, Krankapazität 70 t - Mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Wenn Sie Maschinen, Produktionslinien oder Ihren Betrieb verkaufen möchten, sprechen Sie uns gerne an. Weitere Angebote finden Sie auf unserer Website. Besichtigungen sind nach Vereinbarung möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team Bwsdpfoyqud Rex Afnei

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: nepreverjeno, številka stroja/vozila: A0400177, Funkcionalna oprema, iz Italije, popolna, po retrofitu, v zadnjih 2 letih ni bila uporabljena. Priložena tehnična dokumentacija. Pripravljena za odpremo. Bjdpfoypkptox Afnewi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Univerzalni obdelovalni center s 5-osnim simultanim delovanjem Pomik X: 800 mm Pomik Y: 700 mm Pomik Z: 600 mm Število vrtljajev: 12.000 min⁻¹ Vpenjanje orodja: SK 40 Menjalec orodij: 80 Krmiljenje: Heidenhain 530i Skupna priključna moč: 59 kW Teža stroja: ca. 10.600 kg Bsdpfx Aoypaqmofnewi Dokumentacija/priročnik, brezstopenjsko nastavljivo število vrtljajev, transporter za ostružke Število mest v zalogovniku orodja: 40

Stanje: rabljeno, Leto izdelave: 2017, x-pomik 1.100 mm y-pomik 610 mm z-pomik 610 mm Krmiljenje Heidenhain Dimenzije mize 1.100 x 610 mm Število orodnih mest 40 pozicij Orodni vpenjalni stožec SK 40 Po naši oceni je stroj v dobrem rabljenem stanju in si ga je mogoče po predhodnem dogovoru ogledati pod napetostjo. Pribor, prikazana orodja in vpenjalne naprave so vključeni v dobavo samo, če je to navedeno v dodatnih informacijah. Bedpfoyn R Ndox Afnswi Vse spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja so pridržane!

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Technical details x-travel: 2800 mm y-travel: 2200 mm z-travel: 800 mm Control: Heidenhain iTNC 530 Table surface: 3000 x 1200 mm Tool holder: HSK-A-63 Spindle speed: 12000 rpm Drive power: 18 kW Bjdsym T Dbopfx Afnowi Feed rate: 35,000 mm/min Total power requirement: 68.7 kW Machine weight approx.: t Space requirements approx.: 12.4 x 3.5 x 4.6 m Additional information The FPT DINO is a 5-axis gantry milling machine designed for precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12000 rpm, this machine combines large machining capacity with outstanding dynamics for finishing operations. CNC path control Heidenhain iTNC 530 5 controlled axes (simultaneous): X/Y/Z/C/B Travel distances: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length 12,434 mm Machine width 3,597 mm Machine height 4,622 mm Coolant system (no IKZ) Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15025702504, potovalna razdalja osi X: 2.350 mm, pomik osi Y: 520 mm, pomik po osi Z: 520 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, nazivna (navidezna) moč: 21 kVA, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.800 mm, skupna dolžina: 9.000 mm, skupna širina: 3.200 mm, širina mize: 500 mm, dolžina mize: 700 mm, obremenitev mize: 310 kg, skupna masa: 15.000 kg, največja hitrost vretena: 12.000 obr/min, montažni premer: 40 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 80 A, krmilna napetost: 220 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, DECKEL MAHO DMU 70 VL Universal Machining Centre - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Setup feed X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm Bsdsym Smbspfx Afnjwi - Positional tolerance in X/Y/Z: 0.010 mm - Travel range X-axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 6 kg - Max. total tool weight in magazine: 80 kg - Required compressed air: approx. 5.5 - 8 bar Work tables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Max. rotary table speed: 16.73 rpm - Swivel speed: 14.73 rpm - Swivel range: 0 to 180° - Input/display increment: 0.001° - Weight: approx. 310 kg - one fixed table - Dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - Number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Please note: the machine can be transported on a truck up to 2800 mm width! Attention: The item must be collected between 21/04 and 30/04/2026 at a date to be agreed in advance. FCA D-96257 Marktgraitz – loaded onto truck.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15025704014, potovalna razdalja osi X: 2.350 mm, pomik osi Y: 520 mm, pomik po osi Z: 520 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, nazivna (navidezna) moč: 41 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426, skupna višina: 2.800 mm, skupna dolžina: 9.000 mm, skupna širina: 3.200 mm, največja hitrost vretena: 18.000 obr/min, premer orodja: 40 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DECKEL MAHO DMU 70 VL Universal Machining Centre - Operating voltage: 400 V - Frequency: 50 Hz - Connection load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup feed X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm Bwsdpfxjym Sd Te Afnji - Positioning tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer 2 x 32 stations - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display resolution: 0.001° - Weight: approx. 310 kg - Includes the tool holders visible in the photos in the magazine, as well as chip conveyor and coolant system - Note: The clamping systems on the work tables are not included in the scope of delivery. Note: The machine can be transported on a truck with a width of up to 2800 mm! Note: The item must be collected bindingly at an agreed date between 21.04. and 30.04.2026. FCA D-96257 Marktgraitz - loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref.-Nr.: 10621 Proizvođač: PAMA Tip: Speedmat 3/TR16 Godina proizvodnje: 2008 Tip upravljanja: CNC Upravljačka jedinica: SIEMENS SINUMERIK 840 D PL Lokacija skladišta: Halberštat Zemlja porekla: Italija X-pomak: 3500 mm Y-pomak: 2500 mm Z-pomak: 2200 mm W-osovina: 800 mm Prečnik vretena za bušenje: 160 mm Nosivost stola: 12000 kg Površina stola za stezanje: 1600 x 2000 mm Prijem alata: ISO 50 BIG PLUS Brzina obrtaja: 3500 o/min Maksimalni obrtni moment: 2.765 Nm Brzi hodovi X/Y/Z: 25.000 mm/min Snaga pogona – motor vretena: 46 kW Unutrašnje hlađenje: 15 / 45 bar Spoljašnje hlađenje: 50 / 4 bar Brzina vretena, brzina prenosa 1: 2.120 o/min Brzina vretena, brzina prenosa 2: 2.765 o/min Dodatne informacije: Automatska izmjena alata SK50 DIN69871, komada 80 Automatska glava za glodanje pod uglom TS 35 – 360 pozicija Bjdpfxoym Nfue Afnjwi Obrtaji: 2000 o/min Obrtni moment: 2000 Nm Automatska univerzalna glava za glodanje TU25C (2 ose) Obrtaji: 3000 o/min Obrtni moment: 800 Nm Automatska izmjena dodatne opreme, komada 2+1 Merni taster (Renishaw) Mašina može biti demonstrirana pod naponom.

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref. št.: 10615 Proizvajalec: DMG Tip: DMU 210 P Leto izdelave: 2011 Tip krmiljenja: CNC Krmiljenje: Heidenhain ITNC 530 Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 128/XXXX Bsdpfx Aeym Nfhsfnswi X-hod: 1800 mm Y-hod: 2100 mm Z-hod: 1250 mm Območje nihanja: -30 / +180 ° Nosilnost mize: 10000 kg Maks. premer rotacijske mize: 1700 Ø Območje vrtljajev mize: 12 min/-1 Vpenjalo orodja: SK 50 Število orodnih mest v magazinu: 60 Približna teža stroja: 41 t Vreteno z motorjem: 24000 U/min Pogon za podajalne osi A, C: 30 min/-1 Horizontalna glava za rezkanje: 130-1.380 mm Vertikalna glava za rezkanje: 230-1.480 mm Dodatne informacije: Stroj je možno pregledati pod napetostjo.

Stanje: dober (rabljeno), Leto izdelave: 2010, Ref. No.: 10530 Manufacturer: DöRRIES - SCHARMANN Model: Alpha 1000 Year of manufacture: 2010 Control system: CNC Control unit: Siemens SINUMERIK 840 D Location: Halberstadt Country of origin: Germany X travel: 2000 mm Y travel: 2000 mm Z travel: 2000 mm A-axis: 0 - 90 x 0.001° B-axis: 360 x 0.001° Number of T-slots: 1 + 8 Bwodpfxsym Nctj Afnsi Max. workpiece weight: 5,000 kg T-slot width: 22 mm T-slot spacing: 100 mm T-slots: DIN 650 mm Tool holder: HSK – A 100 Tool magazine capacity: 207 + 10 pcs. Maximum torque: 1,250 Nm Feed speeds X/Y/Z axis: 1 – 30,000 mm/min Rapid traverse X/Y/Z: 30 mm/min Spindle motor drive power: 45 kW Total power requirement: 100 kW Floor space required (approx.): 13 x 8 x 4.5 m Pallet size (L x W): 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 – 1,096 rpm Spindle speed gear stage 2: 1,096 – 6,000 rpm Additional features: - Touch probe - Chip conveyor - Coolant system - Coolant through spindle - Pallets with 5-fold media interface and hydraulic clamping - Extraction unit - Swiveling spindle A-axis 0 – 90° - NC rotary table B-axis

Stanje: dober (rabljeno), Leto izdelave: 2010, Ref. No.: 10287 Manufacturer: DMG Model: DMC 210 FD Year of Manufacture: 2010 Controller Type: CNC Controller: Heidenhain Mill Plus Location: Halberstadt Country of Origin: Germany X Travel: 2,100 mm Y Travel: 2,100 mm Z Travel: 1,250 mm Machine Length: 11,000 mm Machine Width: 5,000 mm Machine Height: 3,500 mm Max. Workpiece Diameter: 2,500 mm Max. Workpiece Weight: 6,000 kg Max. Rotary Table Diameter: 1,850 mm Table Speed Range: 250 rpm Tool Holder: HSK-A100 Bedpfxsym I U Is Afnewi Tool Magazine with: 183 pcs. Spindle Speed: 12,000 rpm Max. Drilling Spindle Torque: 288 Nm Max. Torque: 2,000 Nm Feed Rate X/Y/Z Axis: 30,000 mm/min Max. Workpiece Height: 1,460 mm Axes: 5 Additional Information: Turning and milling center incl. pallet changer system Gear-driven spindle with 1,800 Nm Coolant preparation system with belt filter, 710 x 50 mm 1 chip conveyor Knoll 600S2 2 Losma oil mist separators 1 steel platform (storage area for clamping devices), approx. 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoders, electrical components replaced - Geometry logs available The machine is still in production and under power. The machine can be inspected at any time by appointment.

Stanje: dober (rabljeno), Leto izdelave: 2002, 5-osni CNC-obdelovalni center Proizvajalec: AXA Model stroja: VPC 50 U Krmiljenje: Siemens Leto izdelave: 2002 Število krmiljenih osi: 5 Portalska izvedba TEHNIČNI PODATKI Pomiki - X-os (mm): 2.300 - Y-os (mm): 1.200 - Z-os (mm): 700 Vreteno – nagibno vreteno - Območje nagiba (stopinj): 90 (0,001) - Razpon vrtljajev (vrt/min): 30–7.500 Orodjarna - Vpenjanje orodja: SK50 Strojna miza - Velikost fiksne mize (D x Š) (mm): 1.100 x 1.100 - Premer vgrajene vrtljive mize (mm): 1.100 x 1.100 Pridržujemo si pravico do sprememb in napak v tehničnih podatkih. Bwjdpfx Afjymw Tgjnoi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 61.082 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 800 mm, model krmilnika: HEIDENHAIN TNC 426, Oprema: transportni trak za ostružke, In January 2025, a new spindle was installed! The machine has been regularly serviced! TECHNICAL DETAILS Travel X-axis: 2,800 mm Bodpeymw Rlofx Afnswi Travel Y-axis: 1,200 mm Travel Z-axis: 800 mm Feed Rates Rapid traverse: 35,000 mm/min Spindle Speed S1 (continuous operation) Vertical: 10,000 rpm Spindle Speed S1 (continuous operation) Universal swivel head, 2-axis: 18,000 rpm MACHINE DETAILS CNC Control: HEIDENHAIN TNC 426 Electrical Data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Total installed power: 59.8 kW Operating Hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design from the FPT-DINO series Precision linear guides and ball screws Spacious work area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for toolmaking, moldmaking, and mechanical engineering Includes documentation and acceptance certificate according to ISO standards Automatic tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Technical Details x-axis travel: 1600 mm y-axis travel: 1250 mm z-axis travel: 1600 mm B-axis (table): 360.000 x 0.001° Swiveling head +/- (HV): 360.000° Pallet size: 1000 x 800 mm Table load: 3000 kg Tool holder: SK 50-B Spindle speeds: max. 8000 rpm Gear stages: 2 Spindle motor (100/40 % duty cycle): 37/50 kW Infinitely variable feeds x/y/z: 30,000 mm/min Total power requirement: 100 kVA Machine weight approx.: t (specify exact weight if available) Space requirement approx.: 11,555 x 7,998 x 5,050 mm Additional information Universal machining center, 5-axis simultaneous Original purchase price: EUR 1,295,000 The machine was first commissioned as a new unit in September 2011. A geometry measurement protocol dated 30.08.2025 is available. Bsdpfjymlldsx Afnewi RTCP function is possible. On Siemens this is called TRAORI (orientation transformation). TRAORI is unlocked and configured. Equipment: - CNC control Siemens 840D Solution Line - Separate hand-held control unit, wired, Siemens HT-2 - 2-station pallet changer with safety light barrier - 330-tool automatic changer (max. tool length 600 mm) with second control panel Siemens 840D - Tool taper cleaning - Special enclosure with oil mist extraction system - Coolant tank 3,300 liters, pump pressure 4 bar / 50 bar (Q1/Q2) - Chip conveyor - Workpiece probe - Operating manual - Spare part: Unused ball screw Note: The machine is sold without tool holders, tooling, or clamping devices.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 12.200 mm, pomik osi Y: 4.200 mm, pomik po osi Z: 1.800 mm, proizvajalec krmilnikov: Heidenhain, dolžina mize: 4.000 mm, širina mize: 4.000 mm, model krmilnika: TCN 530, nazivna (navidezna) moč: 63 kVA, obremenitev mize: 100.000 kg, Oprema: transportni trak za ostružke, X/ os: 12200 mm, Y/ os: 4200 mm Z/ os: 1800 mm, A/ os: 180° C/ os: 360°, W/ os: 3600 mm, B/ os: 360°/001° Bwedeymklvjpfx Afnoi T: 100 ton 4000 mm x 4000 mm / Skoda "Možno dodati digitalno" Moč motorja: 63 kW Območje hitrosti: 22–5000 vrt/min CNC krmilna enota: Heidenhain I TCN 530

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 83.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.100 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, delovne ure vretena: 32.800 h, nova vretena v 08.2021 > trenutno število ur vretena 5.577 h ročni volan magazin za orodja z 60 mesti SK40 odsesavanje oljne megle IKZ (hlajenje skozi vreteno) vreteno 12.000 1/min SK40 Bedpsyl Ut Uefx Afnswi sonda Renishaw Opomba: Ponujamo prilagodljive finančne rešitve za vse stroje ter profesionalno storitev selitve. Demontaža, prevoz in strokovna montaža – vse na enem mestu. Obračun glede na individualne pogoje in trajanje. Kontaktirajte nas za vašo osebno ponudbo.

Stanje: dober (rabljeno), Leto izdelave: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Year of manufacture: 1998 Control: SIEMENS 840C Machine No.: 85667 Travel paths: X-axis (longitudinal): 1,200 mm Y-axis (cross): 700 mm Z-axis (vertical): 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhauled (value: €15,000) in 08/2025. Equipment: Swivel head: -90 to +90 degrees, indexing in 2.5° increments NC rotary table, make SEMPUCO, 400 mm Spindle: SK 40, speed 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant supply through spindle External coolant supply Paper band filter Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Features, technical data and transport – see PDF. Illustration, contents and information are provided without guarantee and are therefore non-binding. All other accessories visible in the photos and videos are not included and are thus not part of this sale. The scope of delivery only includes the accessories explicitly stated here, in the order confirmation, and on the invoice. Bwedpfx Aeyl Tzksfnsi FCA (Free Carrier, truck loaded) D-92729 Weiherhammer Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon purchase.

Stanje: dober (rabljeno), Leto izdelave: 2012, EiMa ALPHA T CONTURA 5-axis Universal Machining Center Year of manufacture: 10/2012 Control unit: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel ranges: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel range: ± 121° Bodpfsyl Tukox Afnjwi C-axis travel range: ± 211° Feed rate X/Y/Z = 60/60/40 m/min. New milling spindle installed on 19.05.2025 Equipment: 5-axis fork-type head Milling spindle 15 kW/12 Nm / 24,000 rpm For milling, drilling, sawing Disc tool changer for 12 tools, HSK-63 F Pick-up station for saw blade Spindle cooling unit Fluidtech minimum quantity lubrication system Partition wall for pendulum operation Vacuum clamping plate by WITTE, 2,100 mm x 1,200 mm x 42 mm Chip conveyor Extraction system by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawing – see PDF. Illustrations, content, and data without guarantee, therefore not binding. All other accessories shown in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery includes only the accessories explicitly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier - Truck Loaded) D-97944 Boxberg Packaging only Delivery time: immediately Subject to prior sale / payment due immediately upon conclusion of sale.