Beppo Bercht Werkzeugmaschinen

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 250 mm, pomik po osi Z: 600 mm, število osi: 4, This 4-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool turret with a spindle speed of 4,000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics and is equipped with a C-axis for numerically controlled turning and positioning. If you are looking for a high-quality lathe, you should consider the TRAUB TNC 65 DG horizontal lathe we offer for sale. Contact us for further details. • TX8i control with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC • TX8i control with 64-bit technology including TFT color flat screen and electronic handwheel • Electrical system in accordance with VDE/EN 60204 • Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz • Machine operating voltage 400V 50 Hz • Accessory operating voltage 230V 50 Hz • Control voltage 24V DC • Machine equipped with interference suppression kit for industrial networks (EMC-compliant) • CE declaration of conformity and CE marking • Designed for machining metals and plastics with a defined cutting edge • Main spindle C-axis (numerically controlled turning and positioning device) • Counter spindle C-axis with synchronised speed control • Tool drive turret 1: Power 3.1 kW, speed 4,000 rpm • Tool drive turret 2: Power 3.1 kW, speed 4,000 rpm • Tool monitoring TX8i with wear and break control via axis motor monitoring Gsdpfx Afey Sg Niswoub • Thread cutting without compensating chuck • TRAUB Polyform software for milling programming with C-axis (face, longitudinal, cylindrical surface) • Network interface preparation with Ethernet port and RJ45 socket • Z/V-axis counter spindle software with defined end position (face transfer) • Maximum clamping diameter depending on system up to 60 mm Additional equipment: • Workpiece unloading device with gripper in turret 2 (automation) • Chip conveyor (hinged belt), discharge height 1,200 mm • High-pressure coolant system with programmable pressure stages 20 / 5 bar • Preparation for extraction and filtration system, connection Ø200 mm, socket 400V • Bar feeder interface preparation DNH 61 • RÖHM collet chuck system for spindle Ø65 mm • Reducing sleeve for main spindle Ø65 mm Technical Specification: Counter Spindle: Yes Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 210 mm, pomik po osi Z: 450 mm, število osi: 3, This 3-axis horizontal lathe TRAUB TNA 300 was manufactured in 2000. It features a spindle diameter of 65 mm and is equipped with a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine also comes with a chip conveyor and tool monitoring systems to enhance operational efficiency. If you are looking for a high-quality lathe, the TRAUB TNA 300 we offer for sale is worth considering. Please contact us for further details. Gedpfx Afey Sg Dgewsub • Spindle diameter: 65 mm • Machine version: without tailstock • Basic equipment: included • Hydraulic hollow clamping cylinder: included in delivery • High-pressure coolant system: 12 bar / 3 bar • Control: TX8H, 32-bit technology; latest-generation processor (at time of manufacture); parameter data on diskette • Axes/functions: • C-axis: included (numerical spindle positioning and rotation axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and Safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown at material end: optional via parameters • Error message via parameter: selectable • Guideway cover: included • Workpiece clamping: • Collet system: ROHM • Collet system compatibility: • DIN 6343 size 185E, max. diameter 60 mm • DIN 6343 size 48, max. diameter 42 mm • Rubberflex series 52 compatible • Rubberflex series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical installation according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: Industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine Standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional Equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar loader preparation: included • Bar magazine: TRAUB DNH 61-3000 (automatic) • Loading: telescopic pusher system • Bar forms: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar changer: included • Remnant piece removal: forward • Central bar diameter adjustment: included • Continuously adjustable feed force: included • Central magazine adjustment: included • No guide channel change required • No collet change required • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle: No Driven Tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 81 mm, pomik po osi Z: 80 mm, moč vretenovega motorja: 20.000 W, število osi: 5, This 5-axis Index ABC horizontal lathe was manufactured in 2012. It is equipped with a main spindle featuring a maximum speed of 6,000 rpm, and a counter spindle with a speed of 4,500 rpm. The machine features two turrets, each equipped with X and Z axes, as well as a powerful driven tool system. If you are looking for a high-quality lathe, you should consider the Index ABC machine we are offering for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max. speed 6,000 rpm; max. power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Counter spindle: 7.5" chuck interface, max. speed 4,500 rpm • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max. 4,000 rpm • Turrets: Two turrets each with X and Z axes; driven tool system on turret 6,000 rpm, 3.3 kW • Rear working unit: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feeder) • Control: INDEX C200-4D based on Siemens 840D; 26 cm color display; thread cutting without compensating chuck; motor current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Electrical data: 400 V, 50 Hz TN-system; total connected load 45 kVA; rated power 38 kW; rated current 65 A; maximum fuse 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1,250 mm • Bar loader: MBL 65/3700 for spindle height 1,010 mm; bar diameter up to 65 mm; bar loader length 3,700 mm; roller bearing guide channel system; loading bars (Ø12 mm and Ø20 mm, length 1,400 mm); guide sets for 14-18 mm, 18-22 mm, 22-65 mm • Workpiece unloading device for main and counter spindle with parts catcher Gedpfx Ajy Sg Dajfwoub • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Work area lighting • Two electrical cabinet cooling units • 3 kVA transformer Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, največja hitrost vretena: 1.800 obr/min, potovalna razdalja osi X: 203 mm, pomik po osi Z: 1.219 mm, število osi: 3, Ta 3-osni stružni center HAAS TL-2 je bil izdelan leta 2020. Maksimalna dolžina reza je 1.218 mm, maksimalni premer reza pa 203 mm. Stroj je opremljen z 8" ročnim 3-čeljustnim vpenjalom in 4-pozicijskim revolverjem za orodja, zato omogoča vsestransko uporabo pri različnih stružnih operacijah. Če iščete visokokakovostni stružni stroj, razmislite o horizontalnem stružnem stroju HAAS TL-2, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Maksimalni premer reza: 203 mm • Maksimalna dolžina reza: 1.218 mm Guodpfx Asy Sgvcjfweb • Vreteno: A2-5 nos • Revolver za orodja: 4-stopenjski • Način delovanja: togo rezanje navojev • Stanje: zelo dobro; zelo malo obratovalnih ur; možnost preizkusa pod napetostjo Dodatna oprema • 8" ročno 3-čeljustno vpenjalo (A2-5) • Konjiček • Ročno podprtje obdelovanca (steadyrest) Tehnične specifikacije Proti-vreteno: Ne Pogon orodja: Ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 100 mm, pomik po osi Z: 350 mm, moč vretenovega motorja: 11.000 W, skupna višina: 2.250 mm, skupna širina: 1.985 mm, skupna masa: 4.050 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P300L, največja dolžina izdelka: 1.734 mm, število mest v zalogovniku orodij: 12, število osi: 3, This 3-axis Okuma LB2000EXII MC was manufactured in 2013. It features a maximum swing diameter of 580 mm and a maximum machining diameter of 360 mm. The machine is equipped with a turret head offering 12 tool positions, and a rapid traverse speed of 25 m/min on the X-axis. If you’re looking for a high-quality turning center, consider the Okuma LB2000EXII MC horizontal lathe we currently have for sale. Please contact us for further details. • Chuck size: 6" • Max. swing diameter: 580 mm • Max. machining diameter: 360 mm • Max. machining length: 150 mm • Spindle power: 11.0/7.5; (15/11; 22/15) kW • Turret: • Number of tool positions: 12 • External tool holder: 20 x 20 mm • Internal tool accommodation: Ø 32 mm • Driven tool speed: 45-6000 rpm • Driven tool power: 5.5/3.7 (7.1/4.1) kW • Rapid traverse: • X-axis: 25 m/min • Y-axis: 12.5 m/min • Z-axis: 30 m/min • W-axis: - • C-axis: 200 rpm • Operating hours: • Total: 43,157 • Cutting time: 18,671 Additional equipment • Bar feeder: IRCO MUK-7012 (bar diameter 6-70 mm, length 1250 mm) • Tool holders (including driven tool holders) • Collet chuck: Hainbuch SPANNTOP Technical Specification Counter spindle: No Driven tools: Yes Gjdsy Sgr Rspfx Afwsub

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, Emco E25, v zelo dobrem stanju, letnik: 2012. Popolnoma delujoč. Aprila 2026 so bili izvedeni naslednji popravki: Ležaji vretena so bili zamenjani, steklo na vratih stroja je bilo zamenjano, jermen je bil zamenjan, geometrija preverjena. Ogled v proizvodnji možen do 22. tedna 2026. Krmilje: Siemens 828 D (Shop_Turn) Ogled možen kadarkoli po predhodnem dogovoru. Tehnični podatki: Stružni premer nad prečnikom sani: 85 mm Stružni premer nad posteljo: 250 mm Maksimalni stružni premer: 85 mm Maksimalna stružna dolžina: 225 mm Maksimalni premer palice: 25,5 mm Pomiki: Z-os: 300 mm X-os: 100 mm Revolver z 12 mesti za orodja, VDI16 Gujdpfxsy Sbido Afweb Obratovalna hitrost: 0 – 6.000 vrt/min Teža stroja: ca. 1.200 kg Mere: Dolžina: 1.700 mm Širina: 1.250 mm Višina: 1.800 mm Dodatna oprema: Vpenjalna glava za vpenjalne puše tipa 385E, 6 držal za orodja VDI16, LED signalna lučka, vmesnik za podajalnik palic, 4 klinasti vložki, dokumentacija stroja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, število osi: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, two tool turrets with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant purification system and a hinged belt conveyor for efficient chip removal. If you are looking for a high-quality lathe, consider the TRAUB TNC65 DG horizontal lathe we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes Gedey R Uvuspfx Afwjub • C-axis on main spindle: Yes • C-axis on counter spindle: Yes • V-axis: Yes (programmable position) • Tool turrets: 2 (turret I and II) • Driven tools on turret I: Yes • Driven tools on turret II: Yes • Number of tool stations: 10 per turret • Thread cutting: Without compensation chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant equipment: Purification system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply integrated for both turrets • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Compatible with water-based coolant Additional Equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (including preparation) • Workpiece ejector: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max. clamping diameter 60 mm Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 33.908 h, Funkcionalnost: popolnoma funkcionalen, CNC – Stružnica Proizvajalec: WEILER Tip: E 35 D Leto izdelave: 2002 Tehnični podatki Gusdpfx Afey R Uukjwsb Proizvajalec: WEILER Tip: E35 D Leto izdelave: 2002 Razdalja med konicami: 950 mm Višina konic: 200 mm Premer struženja nad ležiščem: 410 mm Premer vretena: 54 mm Maks. premer struženja: cca 260 mm Obrati: 20 – 3000 min⁻¹ Moč: 10 kW Dimenzije: cca D 2,60 x Š 1,60 x V 1,70 m Teža: cca 2,5 t Oprema • Navodila za uporabo • Sistem za hlajenje • Trivraten vpenjalni tulec • Sprejemnik vpenjalnih puš Vse informacije brez garancije. Možnost predstavitve pod tokom v naši razstavni hali kadarkoli.

Stanje: rabljeno, Leto izdelave: 2022, proizvajalec krmilnikov: Fanuc, model krmilnika: 0i-TF, Opis: Glavna vretena: Tehnologija: Motorno vreteno Maksimalna brzina: 10.000 o/min Maksimalna snaga: 3,7 kW Prolaz šipke: 20 mm Z-os hod (kod dugog obrtanja): 205 mm Stezanje obratka: Stezna čaura Vodeća čaura: Sinhrono prateća Kontra vreteno: Tehnologija: Motorno vreteno Maksimalna brzina: 9.000 o/min Gujdpfsy R Iwrox Afweb Maksimalna snaga: 1,1 kW Stezanje obratka: Stezna čaura Izbacivač: Pneumatski Linearna klizna jedinica: Broj stanica za strugačke noževe: 6 Prihvat alata: 12 x 12 mm Broj stanica za bušilicu: 4 Pogon alata: 8.000 o/min Broj stanica za frontalne nosače bušenja: 4 Prihvat alata: Ø22 mm Zadnja jedinica: Broj stanica: 4 Prihvat alata: Ø22 mm Pogon alata: 8.000 o/min Oprema/pribor: Upravljanje strugotinom: Transporter strugotine Upravljanje rashladnim sredstvom: Pumpa za rashladnu tečnost sa filterom Dovod sirovine: Magacin šipki, FMB minimag 20 Odvoz gotovih delova: Transportna traka sa posudom za prikupljanje Držači alata: Razni fiksni i pogonjeni držači Dodatna oprema: Trafo, radno svetlo u prostoru, pištolj za ispiranje

Stanje: rabljeno, Leto izdelave: 2005, MORI - ZT1500Y - 2005 - 2 vpenjalni glavi in 2 revolverski glavi - maksimalni premer struženja 190 mm (tipično max 170 mm) - maksimalna kapaciteta palice cca 65 mm - maksimalna razdalja med glavnima vpenjaloma cca 1000 mm - odklopljen - po dogovoru je mogoče testiranje Gjdpoy R Extefx Afweub - rabljeno stanje kot prikazano na fotografijah

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 9.554 h, potovalna razdalja osi X: 239 mm, pomik po osi Z: 826 mm, število osi: 4, This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub spindle, and live tooling, enhancing its versatility for a variety of machining operations. The machine is equipped with a 12-station bolt-on turret and includes a chip conveyor and a mist extractor. If you are looking for a high-quality lathe, consider the HAAS DS-30SSY horizontal lathe we have for sale. Contact us for further details. • Condition: In good condition • Usage: Running hours 54,567 h; Servo hours 62,795 h • Spindles: Twin spindles (main/sub spindle; sub spindle rarely used) • Turret: 12-station bolt-on turret (BMT65) • Features: Y-axis milling, live tooling • Electrical: 360-480 V, 3-phase, 50/60 Hz; Total full load current 40 A; Largest load 70 A; Short circuit breaking capacity 10,000 A Additional Equipment • Chip conveyor (Jorgensen) • Mist extractor: SARA Ultra-Jet 2 SD • Parts catcher • Coolant hose • Foot pedals Technical Specification Counter Spindle: Yes Driven Tools: Yes Gujdpfx Aey R Dikofwjb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 208 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 406 mm, število osi: 2, CNC horizontalni stružnica, letnik 2023. Ta HAAS ST-15 ima maksimalno hitrost vretena 4000 vrt/min in je opremljena z 12-pozicijskim vijačenim revolverjem. Opremljena je s Haas podajalnikom palic in tečnim trakastim transportnim trakom za odrezke za učinkovito delovanje. Če iščete visokokakovostno stružnico, razmislite o stroju HAAS ST-15, ki ga ponujamo v prodajo. Za več informacij o tem stroju nas kontaktirajte. • Stanje: zelo dobro • Čas vklopa: 1369:37:08 h • Čas cikla: 373:45:41 h • Čas podajanja/rezanja: 208:26:21 h • Števec končnih kosov: 250 • Števec M30-1: 1577 Gusdpfxey R Dh Te Afwsb • Števec M30-2: 14238 • Električno: 440 V, 3 faze, 50/60 Hz • Polna obremenitev: 20 A • Največja obremenitev: 18 A • Kontravreteno: ni opremljeno (maks. hitrost 0 vrt/min) • LT vreteno: ni opremljeno (maks. hitrost 0 vrt/min) • Pomnilnik: 1 GB Tehnične specifikacije Kontravreteno: Da Pogonska orodja: Ne

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Krmiljenje: Siemens 840D Prehod vretena: 65 mm Število vrtljajev: 4.000 min⁻¹ Orodno držalo: VDI 30 Glavno in prevzemno vreteno z osjo C ORODNI NOSILEC I (XZ) Tehnologija: križni voziček (3x) Pomik: X= 70, Z= 115 mm Orodni nosilec II (X/Z) Revolver s 7 postajami in prevzemnim vretenom vse postaje gnane (3.000 min⁻¹) Pomik: X= 160, Z= 450 mm Orodni nosilec III Revolver z 8 postajami Pomik: X= 150, Z= 200 mm Orodni nosilec IV (zadnja stran) Revolver z 8 postajami Gjdpfx Aey Rr U Uefwsub 3 držala orodij za zadnjo stran OPREMA - Transporter ostružkov - Polž za palice IEMCA MASTER 80/33 HF

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 380 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP‑P200LA‑R, število osi: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-position turret with live tooling, enabling milling and drilling operations on the C-axis. If you are looking for high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we are offering for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C-axis; no Y-axis • Tailstock: Equipped • Tool presetting device: Automatic tool presetting device installed • Turret: 12-position turret with live tooling (milling and drilling on the C-axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2-6 • Spindle bore diameter: approx. 50 mm • Electrical connection: 380 V, 3 phase, 50/60 Hz • Apparent power rating: 17.7 kVA • Full load current: 26.7 A Gujdpfx Afsy Rrwvjwsb • Maximum motor current: 45 A Technical Specification Counter Spindle No Driven Tools No

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, 1 OKUMA CNC stružnica, model LT2000EX-2M1Y z upravljalnim sistemom OSP-P200LA CNC krmilnik vključno z oznako CE 1 komplet 〈Evropska standardna specifikacija〉 1-1 Vreteno, motor VAC 11/7,5 kW (5 min./kont.) 2 kompleta 1-2 Hitrost vretena 50 - 6.000 min⁻¹ 2 kompleta 1-3 Premer vretena 62/100 mm, 140 ravni nos 2 kompleta 1-4 C-osna kontrola, 360° z 0,001° inkrementom 2 kompleta 1-5 Y-os 95 mm (+50 do -45) za zgornji revolver 1 komplet 1-6 Zgornji V16 (struženje & rezkanje) + Spodnji V16 (struženje & rezkanje) Radialni revolver (Brez nosilcev za orodja) 1 komplet 1-7 Pogonski motor za rotacijska orodja, PREX 5,5/3,7 kW (2 min/štetje) 2 kompleta 1-8 Hitrost rotacijskega vretena 45-6.000 min⁻¹ 2 kompleta 1-9 Sistem za dovod hladilne tekočine, motor črpalke 0,8 kW x 3 kompleti 1 komplet 1-10 Delovna luč, fluorescentna svetilka 1 komplet 1-11 Popolnoma zaprto varovalo 1 komplet 1-12 Vrata z medzaporo 1 komplet 1-13 Posoda za ostružke, bočni odvod ostružkov 1 komplet 1-14 Podložke za temelje in nivelirni vijaki 1 komplet 1-15 Ključki za dvigovanje stroja 1 komplet 1-16 Avtomatsko odpiranje/zapiranje vpenjalne glave s potrditvijo 2 kompleta 1-17 Zračni puhalnik za vpenjalno glavo 2 kompleta 1-18 Nadzor mazanja B-1 1 komplet Gjdpfxey Rnbdj Afweub 1-19 Oznaka CE in EMC 1 komplet 1-20 Aplikacija za IEC standard 1 komplet 1-21 Dvojna nožna tipka za upravljanje vpenjalne glave 2 kompleta 1-22 Sinhronizirano narezovanje navojev (za LT2000EX-M) rotacijsko rezkalno orodje 1 komplet 1-23 CNC krmilnik OSP-P200LA z 38 cm (15") barvnim zaslonom, zaslon na dotik 1 komplet 1-24 Specifikacije kompleta OSP-P200LA 3D-M-E 1 komplet *Večfunkcijski stroj, pretvorba koordinat (1 komplet) *Večfunkcijski stroj, generiranje profilov (1 komplet) *Shramba programov, standard: 2GB (1 komplet) *Delovni medpomnilnik, standard: 2MB (1 komplet) *3D simulacija v realnem času (1 komplet) *Preverjanje preseganja delovnega časa (1 komplet) *Nadzor obremenitve (vreteno, pomične osi) (1 komplet) *Nadzor delovanja NC (vklj. števec in nadzorne funkcije) (1 komplet) *Funkcija za zmanjšanje časa cikla (1 komplet) *Spremenljivo upravljanje hitrosti vretena (1 komplet) 1-25 Kompenzacija napake stopenj X + Ys + Z 1 komplet 1-26 Funkcija za preklop med palčnim in metričnim sistemom 1 komplet 1-27 Zaznavanje izpada obdelovanca 1 komplet 1-28 Signalna svetilka statusa (2-slojna), namesto svetilke v 3D-E kompletu 1 komplet 1-29 Električna instalacija prilagojena lokalnim napajalnim virom (CE transformator) 1 komplet 1-30 Odpiranje/zapiranje vpenjalne glave med vrtenjem vretena (LT-Standard) 1 komplet 1 komplet orodij - glejte zadnjo fotografijo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, Črpalka + Filter + Hladilnik Št. 06 motoriziranih aksialnih glav Št. 13 motoriziranih radialnih glav Držalo za orodje Držalo za vrtalnike Godpfoy Rlbzsx Afwsub Puntalino: Puše nalagalnika + cevke: Ø51/ Ø46 / Ø41 Št. 02 novih serij puš nalagalnika MBL Št. 02 2 optični liniji revidirani s strani HEIDENHAIN 1 priključek Baluff Klešče za Gantry Različni senzorji, proximity, kabli Pogonski jermeni: 6 kosov Set antivibracijskih puš za nalagalnike MBL

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: IntNr231509, A Miyano BNE-51S CNC lathe with IEMCA BOSS 552-HD bar feeder is available for sale. Year of manufacture: 1999 Control: FANUC Series 18-T (dual-channel control) Gedpfx Afoy Rft Rswjub Technical details: Maximum bar diameter: 51 mm Maximum turning length: approx. 125 mm Travel ranges: * X1 / X2: 150 mm / 115 mm * Z1 / Z2: 380 mm / 125 mm * Y-axis: +/- 40 mm (upper turret) Spindles (main & sub spindle): - Speed range: 135 – 5,000 rpm (both spindles) - Drive power: 11 kW / 15 kW (main spindle) - C-axis: 0.001° on both spindles for complete contour machining Tool system (2 x turrets): - Turret 1 (upper): 12 stations (all driven, incl. Y-axis) - Turret 2 (lower): 12 stations (all driven) - Maximum driven tool speed: 3,200 rpm Bar feeder: IEMCA BOSS 552-HD - Bar diameter: 5 mm to 51 mm - Bar length: up to 3,200 mm Additional equipment: - Chip conveyor - Batec fire extinguishing system The machine is available for viewing under power by appointment. Subject to prior sale and to changes or errors in specifications or technical data.

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: IntNr231584, Na prodajo je robusten CNC poševnoležiščni stružni center ACCUWAY UT-300, letnik 2013, vključno z avtomatskim podajalcem palic FEDEK DH-65L. Tehnični podatki Krmilje: FANUC 0i-TC Število osi: 2 osi, X/Z Pomik X-osi: 300 mm Pomik Z-osi: 750 mm Hitri pomik X-osi: 20 m/min Hitri pomik Z-osi: 24 m/min Hitrost vretena: do 3.500 obr/min Prehod za palico: 75 mm Moč glavnega motorja: pribl. 15 / 18,5 kW Revolver za orodja: 12 postaj Konjiček Gedpfx Afey N Tu Hjwjub Teža stroja: pribl. 5.500 kg Dimenzije stroja: pribl. 3.300 × 1.800 × 1.800 mm Podajalnik palic FEDEK DH-65L: Dolžina palice: pribl. 1.500 mm Premer palice: pribl. 5–65 mm Vmesnik: vključen vmesnik za podajalnik palic Stroj si je možno ogledati po predhodnem dogovoru. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 161 mm, pomik osi Y: 100 mm, pomik po osi Z: 580 mm, število osi: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin-spindle configuration with Y-axis capability on both turrets, enabling versatile machining operations. The machine offers a maximum Z-axis travel of 580 mm and a Y-axis travel of mm. If you are looking for high-precision turning capabilities, consider the Nakamura Tome WY-250 horizontal lathe we have for sale. Please contact us for further information. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposing tools • 6x boring bar holders • Driven tool holders (HEIMATEC): • 4x radial • 4x axial • Collet chucks (Bellegrandi): • Main spindle: MSCNT70-A6" for size 70 BA and BD collets, complete with corresponding cups • Sub spindle: MSCTNR70-A5" for size 70 BA collets, complete with spring ejector Additional Equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar loading magazine for CNC lathes • Capacity: • Maximum bar length: 3300 mm (to be confirmed) • Maximum bar diameter: up to Ø80 mm (according to model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feed, synchronization with turning cycle, compatible with spindle insert/guide channel systems, robust frame • Condition: Currently stopped/not in production; reported to be functional; can be inspected by appointment • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may be part of the lathe setup Gsdpfx Afsy N Spcjwjub • Complete set of part grippers ("manine") for the parts unloader (parts unloader itself not included) Technical Specification Counter spindle: Yes Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 230 mm, pomik po osi Z: 520 mm, skupna masa: 4.100 kg, število osi: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It offers a maximum X-axis travel of 230 mm and a Z-axis travel of 520 mm. The machine is equipped with a hydraulic clamping system, a chip conveyor, and several driven tool holders to enhance machining capabilities. If you are looking for high-quality turning operations, consider the MORI SEIKI SL-153 SMC horizontal lathe we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Includes foot pedal • Interface for automatic bar feeder likely installed • Tooling and supplied holders • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for sub-spindle machining • 1x shared output for both spindles Guedpfx Afey N Shlsweb • 2x special double boring bar holders (bore Ø20 mm) • Prepared for hydraulic clamping accessories Schunk TendoTurn DSE (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with bores Ø25 mm and Ø32 mm • Accessories for direct mounting of square shank tools to the turret • Collet holders • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 • Suitable for BA and BD collets size 52 • Suitable for main and sub-spindle • Electrical data • Voltage: 200 V • Frequency: 50 Hz • Full load current: 116 A • Spindle motor rated current: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported to be functional prior to removal • Available for inspection Additional Equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year of manufacture: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: According to the seller, compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never used with this lathe • Condition: Reported as functional Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 280 mm, pomik po osi Z: 500 mm, moč vretenovega motorja: 22.000 W, število osi: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It offers a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust 12-station turret. If you are looking for a high-quality lathe, consider the Okuma LB 300M X 500 horizontal turning center we have for sale. Please contact us for further details. • CNC: OSP U100L • Maximum turning diameter: 340 mm • Maximum turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increments) • Rapid traverse: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Driven tools: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: Quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional Equipment Guodpfsy N Sabox Afweb • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blower • Driven tool holder • 4 radial driven tools • 4 axial driven tools Technical Specification: Taper size: VDI 40 Counter spindle: No Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 22.542 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 570 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: FANUC, model krmilnika: Series 21i-T, število osi: 3, This 3-axis Gildemeister CTX 400 Series 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm, a Z-axis travel distance of 635 mm, and an X-axis travel of 570 mm over the bed. The machine is equipped with a 12-position turret and comes with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking for a high-quality lathe, consider the Gildemeister CTX 400 Series 2 machine we have for sale. Contact us for further details. • X-axis travel: max. 570 mm (over bed) / 420 mm (over cross slide) • Voltage: 400 V • Frequency: 50 Hz • Power consumption: 44 kVA • Rated current: 64 A • Main fuse: 80 A • Control voltage: 230 V (AC) / 244 V (DC) • Operating hours: 22,542 hours • Feed time: 8 hours 4 minutes • Turret: 12-position turret • Tool mounting: driven tools; C-axis is displayed on the screen Additional Equipment Gedpfey Nynyox Afwjub • 3-jaw chuck • Chip conveyor • Coolant system • Work area lighting • Optional: Toolholder package • Optional: Schunk Rota NCD 210-66 three-jaw chuck Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, AVTOMATSKI CNC STRUŽNIK INDEX ABC 60 Popolnoma delujoč Pripravljen za proizvodnjo. Letnik 2000 Gujdpfxoy Nycdo Afwsb CNC stružnica s fiksno glavo, 1 vpenjalna glava Prehod: 65 mm 2 revolverski glavi z motoriziranimi orodji Stranska obdelava spredaj in zadaj Dimenzije: 6500x1500x1800 mm Krmiljenje: SIEMENS 840 C Transporter za odrezke: KS SRF 040.00 Naprava za podajanje palic: SCHMID LN 3200

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 13.390 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 550 mm, premer struženja: 280 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 515 mm, moč vretenovega motorja: 11.000 W, hitro pomikanje X-os: 15 m/min, hitri pomik na osi Z: 24 m/min, skupna višina: 1.800 mm, skupna dolžina: 2.100 mm, skupna širina: 1.350 mm, hod vretena: 500 mm, premer tulec: 60 mm, poteza s peresom: 125 mm, vrsta vhodnega toka: Klimatska naprava, vrtilni moment: 121 Nm, skupna masa: 4.000 kg, zunanji premer vpenjalne glave: 225 mm, Oprema: dokumentacija / priročnik, For sale is a TC400 52MC CNC lathe from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. The machine is in good used condition with only 13,390 hours of active control time, of which just 3,341 hours are actual machining time. The machine has not been in operation for the past 5 years and was serviced by a Spinner technician in July 2025. It is equipped with a 12-station driven tool turret, automatic parts removal with conveyor belt, chip conveyor, and four foot switches. The original technical documentation in both German and English, electrical wiring diagrams, service booklet, recent maintenance reports, original invoice, as well as several tool supplements, are included with the machine. Additionally, various tools are included, all in working condition—some of them hardly used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg Detailed technical data can be found in the extracts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, and loading onto a truck (a suitable forklift is available). Shipping or pick-up must be organized by the buyer and is not included in the price. The stated price is net. If you are interested, please contact us by email, direct message, or phone. If required, we are happy to provide a current video for functional proof. Fitok GmbH, Moritz Hanesch, 07.05.2026 Gsdpfxjy Nxd Hj Afwjub

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.020 mm, proizvajalec krmilnikov: OKUMA, število osi: 4, This Okuma LU15 M-2SC 1000 4-axis CNC lathe was manufactured in 1998. It features two tool turrets, driven tools with C-axis capabilities, and synchronized threading for enhanced productivity. The machine is equipped with an integrated tool setter for precise measurements and a programmable tailstock for increased versatility. If you are looking for a high-quality turning center, consider the Okuma LU15 M-2SC 1000 horizontal lathe we have for sale. Contact us for further details. • Longitudinal travel (X): 1020 / 995 mm • Cross travel (Z): 260 / 140 mm • Swing diameter: 340 mm • Swing over bed cover: 530 mm • Swing over cross slide: 380 mm • Spindle nose: ASA-A2 / DIN 55026 Size 6 • Spindle bore: 62 mm • Spindle diameter at front bearing: 100 mm • Chuck diameter: 200 mm • Main drive: Motor spindle (hollow shaft motor), frequency controlled, 60% duty cycle • Main drive power: 22 kW • Maximum torque: 412 Nm • Spindle speed range: 45 - 4,500 rpm • Speed ranges (electrical): 2 • Feed drive: AC servo motors, digitally controlled Gsdpfsy Nmi Dex Afwsub • Feed range X/Z: 0 - 1,000 mm/rev • Rapid traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Driven tools: Yes (C-axis and driven units) • Thread cutting: Synchronized threading • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Tool wear and breakage monitoring • Tool measurement: Integrated tool setting device / measurement system • Tailstock: Programmable, synchronized with carriage, automatic clamping • Quill: Programmable via M-code • Draw tube diameter: 55 mm (partial hollow clamping cylinder) • Interface: DNC interface RS-232C • Cooling system: Enhanced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan creation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical specification Counter spindle: No Driven tools: Yes