Aidt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 91.191 h, vpenjalna sila: 25.000 kN, premer vijaka: 150 mm, proizvajalec krmilnikov: ENGEL, Cette machine de moulage par injection ENGEL ES 23050/2500 DUO a été fabriquée en 1999 et compte 91 191 heures de production. Elle est équipée d’une commande Engel. La machine offre une force de fermeture de 25 000 kN, est en bon état et bien entretenue. Avantages de la machine Avantages qualitatifs de la machine • La machine est en très bon état, tous les petits travaux de maintenance ayant été réalisés en interne et les plus importants directement par Engel. Avantages techniques de la machine • Force d’ouverture : 1 600 kN • Course d’ouverture : 3 100 mm Hfsdpfx Aozb Emqedrjh • Diamètre des colonnes : 360 mm • Longueur de dosage : 720 mm • Volume d’injection max. : 12 725 cm³ • Vitesse de rotation de la vis : 85 tr/min • Pression d’injection spécifique : 1 410 bar • Puissance de chauffage : 120 kW • Zones de chauffe : 7 Remarque importante : Le robot n’est pas inclus dans le prix. Merci de demander le prix du robot en option séparément.

Stanje: novo, Leto izdelave: 2025, Vpenjalna sila: 1600 t Premer vijačnega bata: 70 mm Masa brizga: 1490 g Razdalja med stebrički V: 1420 mm Razdalja med stebrički H: 1870 mm Hjdey Umpuopfx Adrjfh Prostornina brizga: 1232 cm³ Tip: Horizontalen Pogon: Hidravlični

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, vpenjalna sila: 1.700 kN, Vpenjalna sila: 1700 t Premer vijaka: 105 mm Hodpfx Ajy Uk Emedrefh Razdalja med podpornimi nosilci spredaj: 1420 mm Razdalja med podpornimi stebri zadaj: 1870 mm Prostornina vbrizga: 3721 cm³ Tip: Horizontalen Pogon: Hidravlični KUKA robot, 6 osi Stroj kot nov!

Stanje: dober (rabljeno), Leto izdelave: 2007, Zapiralna sila: 1000 t Premer vijaka: 105 mm Razdalja med stebri V: 1150 mm Razdalja med stebri H: 1400 mm Prostornina brizga: 4160 cm3 Tip: Horizontalni Pogon: Hidravlični Hsdpfxoy Ukfme Adrefh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8673 0023, vpenjalna sila: 15.000 kN, premer vijaka: 145 mm, tlak vbrizgavanja: 1.454 letvica, širina plošče: 1.880 mm, višina plošče: 2.150 mm, Regularly serviced machine – see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H × V): 2,150 mm × 1,880 mm Clear distance between tie-bars (H × V): 1,500 mm × 1,250 mm Min./Max. mould height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control: DIAS Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Hjdpey T Hy Defx Adrofh Dimensions (L × W × H): 14.4 m × 3.4 m × 2.9 m Electrical connection Main supply: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with seals 2017: Circulation pump for oil cooler replaced 2017: Teachbox replaced (robot) 2018: Pumps P1 + P3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP installed EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 11.000 kN, premer vijaka: 120 mm, tlak vbrizgavanja: 1.758 letvica, injekcijska masa: 6.175 g, odmični hod: 2.000 mm, KraussMaffei KM 1100–12000 MX incl. WITTMANN Robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar spacing (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Mould height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Hodpfxey T Hd Nj Adrsfh Shot weight (PS): 6,175 g Screw speed (standard / optional): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s MACHINE DETAILS Electrohydraulic configuration Rated pump motor output: 132 kW Installed heating capacity: 82 kW Number of heating zones on barrel: 7 Dry cycles (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel, and three USB ports

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 7.148 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 252315, vpenjalna sila: 17.000 kN, premer vijaka: 120 mm, delovna prostornina: 7.729 cm³, minimalna višina orodja: 800 mm, izmetalna sila: 230.000 N, hod izmetalca: 300 mm, odmični hod: 2.550 mm, dolžina plošče: 2.420 mm, širina plošče: 2.170 mm, pritisk: 2.300 letvica, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, For sale: a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and items with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1,700 tonnes) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection rate: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum platen spacing: 3,350 mm - Platen dimensions: 2,420 × 2,170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive energy-saving servo hydraulics - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pullers - Ceramic heaters - Cylinder insulation - Ecograph / ecobalance system - MES interface preparation – EUROMAP 77 / OPC UA - Full set of Euromap interfaces - Advanced mold cooling - Special configuration for automotive industry - Documentation in Polish - Special industrial ENGEL painting Set includes ENGEL VIPER 60 RC300 Integrated robot Complete production automation integrated with the machine. Hedpfx Aey Tuhiedrsfh Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 belt conveyor included - Full set of safety guards

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 14.650 h, vpenjalna sila: 1.100 kN, delovna prostornina: 350 cm³, tlak vbrizgavanja: 1.455 letvica, skupna masa: 60.000 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Hfjdpfjy R Eq Asx Adroh Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2018, Ser. št. 221921, krmilna enota, proizvajalec Engel, tip CC300, zapiralna sila 1.700 t, 2 brizgalni enoti, vrtljiva miza, vgradna višina min./max. 800 – 1.600 mm, razmik plošč 3.350 mm, svetla širina/v. 1.850 / 1.415 mm, 16 kaskad, 64 vročih kanalov, hidravlični vleki jeder 4 (DS) / 4 (AS), premer polža 105 / 50 mm, brizgalna masa 4.050 / 410 g, obratovalne ure 22.401, teža stroja 75.400 kg, temperiranje orodja, proizvajalec Oni, tip Rhytemper FlexControl 32, 4x 8-kratni blok moduli 125 °C, 6-kratni blok moduli 125 °C, vizualizacijska enota, ročni manipulacijski sistem za odvzem kosov, proizvajalec Engel, tip Viper 60, 5 osi (X,Y,Z,C,B-os), razdalja šob 300 mm, letnik 2018, ser. št. 221938, ohišje za dele, izhodni transportni trak, mobilni transportni trak, proizvajalec Engel, tip BGR FB100 KMAT, letnik 2018, ser. št. 2144098, dolžina cca 4.200 mm, širina 1.000 mm, zunanja temperirna naprava in doziranje materiala nista vključena v ponudbo. Poškodbe: puščajoče hidravlične cevi. Hodjy I R Tqspfx Adrofh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13000 Platen dimensions (HxV) [mm]: 2210 x 1910 Tie bar spacing (HxV) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700-1400 Max. opening stroke [mm]: 3050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm3]: 5195 Injection weight PS [g]: 4728 Injection pressure [bar]: 2296 Max. injection speed [g/s PS]: 186 Electrical/hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heaters power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow valves + 1 valve for hot runner needle control Hfodsy Hqwyjpfx Adrsh Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – cylinder thermal insulation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, vpenjalna sila: 13.000 kN, Vpenjalna sila: 1300 t Premer vijaka: 105 mm Razdalja med vodili V: 1270 mm Razdalja med vodili H: 1570 mm Prostornina hoda: 4546 cm³ Tip: Horizontalen Pogon: Hidravlični KM1300 - 8100 MX Letnik 2016 KM1300MX Hfjdpfx Aoy Emuredroh Zapiralna sila v tonah: 1300 Razmak med batnimi drogovi: 1570 x 1270 mm Višina orodja min/maks: 700/1400 mm Mere plošč: 2210 x 1910 mm Odpiralni hod: 2350 mm Maks. odprtina: 3050 mm Vbrizgalna enota tip 8100 MX Premer polža: 105 mm Maks. vbrizgalni volumen: 4546 cm³ Spec. vbrizgalni tlak: 1778 bar Velikost centrirnega obroča: 315 mm Hidravlična jedra: 4 + 4 Število grelnih enot: 32 za orodje Število hladilnih krogov: 8+8 Električne kaskade: 12 Hlajenje: 12 + 12 Hidravlični vroči kanal: 1x EUROMAP 6

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 11.772 kN, premer vijaka: 130 mm, injekcijska masa: 6.210 g, skupna masa: 70.000 kg, Hydraulic injection moulding machine from 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It offers a shot volume of 8,630 cm³ and a maximum injection pressure of 1,460 bar. If you are looking for a high-quality injection moulding machine, consider this ITALTECH KS 1200 8300 ES, which we offer for sale. Please contact us for further details. Injection Unit • Injection unit size: 8300 • L/D ratio: 20 • Theoretical shot volume: 8,630 cm³ • Max. injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticising rate (HDPE): 140 g/s Hfsdpfxey Dua Ts Adrjh • Heating capacity: 79 kW • Temperature control zones: 5 + 1 Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke (min. mould height): 2,000 mm • Opening stroke (max. mould height): 1,400 mm • Mould height: 600–1,200 mm • Max. daylight: 2,600 mm Platen & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Tie bar distance (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm • Ejector force: 226 kN • Ejector stroke: 300 mm Power & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 l Performance • Dry cycle time: 10 s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 4.517 h, vpenjalna sila: 16.000 kN, premer vijaka: 125 mm, injekcijska masa: 7.450 g, This 3-axis hydraulic injection moulding machine Krauss Maffei 1600-17200MC was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine offers a maximum shot weight of 7,450 g and a platen size of 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1600-17200MC, which we currently have for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm • Daylight (x × y): 1,800 × 1,400 mm • Max. mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN • Moving platen force: opening 177 kN / closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/back): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment: Hjdpsyyyr Tsfx Adrjfh • Spare cylinder/screw set (1x) • Internal cooling system • Core pull device (2x)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 57.752 h, vpenjalna sila: 13.000 kN, premer vijaka: 105 mm, skupna masa: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are in the market for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC we have for sale. Contact us for further details. • International model designation: 12000 MC / 1300 • Operating hours: 57,752 h • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and current separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Fan for cabinet cooling Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Clamping Unit • Hydraulic-mechanical 2-platen clamping system • 4 pressure pads integrated in the moving platen Hfsdpfx Asyx Ez Redreh • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operating side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant • Screw diameter: 105 mm • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle hole diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via screen • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Temperature Control • 8 temperature control zones for hot runners • Adaptive temperature controllers • Maximum output per temperature channel: 2 kW • Temperature controllers supplied with 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage for up to 20,000 cycles • Event log • Alarm history • Graphic process curves • Trend diagrams for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature sensor 20 mA • Central computer interface • MDC (machine data collection) interface with 5 contacts • Volt-free contact for dosing unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 111.569 h, vpenjalna sila: 10.000 kN, This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system comes with an optional REMAK RE-CNC 6-axis robot, featuring a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine offers an injection pressure limit of 185 bar and a dosing stroke of approx. 465 mm. If you are searching for a high-quality injection moulding machine, consider the Krauss Maffei 1000-8000 M, which we have available for sale. Please contact us for further information. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection metering stroke: 200 mm forward stroke actually used for shot injection • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Clamping pressure drop: approx. 4-6 bar/min • Proportional valve pressure ranges: Hfjdsywlvrjpfx Adreh • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Typical cylinder heater ratings: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Detected operating voltages: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. -1 K to +2 K • Condition / maintenance-relevant data • Machine alignment tolerance:

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 67.092 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 10.000 kN, premer vijaka: 120 mm, delovna prostornina: 5.655 cm³, tlak vbrizgavanja: 1.632 letvica, skupna dolžina: 11.600 mm, skupna širina: 2.900 mm, skupna višina: 2.500 mm, skupna masa: 76.500 kg, Zapiralna sila: 10000 kN Mere nosilca h x v: 1120 x 1400 mm Velikost plošče h x v: 1960 x 1690 mm Min. vgradna višina: 550 mm Max. vgradna višina: 1020 mm Hjdpfxoywg N Te Adrofh Max. razmak med ploščama: 2120 mm Hod odpiranja: 1100 mm Premer polža: 120 mm Volumen brizganja: 5655 ccm Tlak brizganja: 1632 bar Oprema: Besedilo na zaslonu v nemščini Enota Compact-Flash Hidravlični izvlek jedra 4x Nivelirni elementi Vmesnik EUROMAP 12 Vmesnik za napravo za temperiranje Povečan oljni hladilnik Ogrevanje orodja 16x Mere stroja D x Š x V: 11,6 m x 2,9 m x 2,5 m Skupna teža: 76500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour monitor integrated with the control desk Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2210 × 1910 mm Tie bar spacing (H × V): 1550 × 1250 mm Mould opening stroke: 2,000 mm Minimum mould height: 600 mm Maximum mould height: 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 82 kW Number of barrel heating zones: 7 Number of dry cycles (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions and Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) Hodpfx Asyugfzedrjfh The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy loss during idle operation - Lower heating of the hydraulic system - Prolonged lifespan of motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce running costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping unit Clamping force: 15,000 kN Platens dimensions (horizontal × vertical): 2150 × 1880 mm Tie bar spacing (horizontal × vertical): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and hydraulic equipment Pump motor rating: 165 kW Heater power: 97 kW Machine dimensions and weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Hfodpfxsyugale Adrsh Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board (cable plate) 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod with seals 2017 – replacement of oil cooler circulation pump 2017 – TeachBox (robot) replacement 2018 – replacement of P1 + P3 pumps (at 65,800 h) 2018 – hydraulic oil change Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to match the machine’s actual demand during the production cycle. As a result, electrical energy is consumed only when it is actually needed. Key benefits: - Reduction of electricity consumption by up to 30% - Servo technology for hydraulic pump drive - World-class, proven technology used in plastics processing industry - Reduced energy losses during machine idle - Lower heating of hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significantly reduced machine operating costs while maintaining full production capabilities.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Basic Information Hfsdpfx Ajyuf Tdjdreh Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 hours Clamping Unit Clamping force: 2,300 kN Platen dimensions (horizontal × vertical): 2,900 × 2,500 mm Tie bar spacing (horizontal × vertical): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Machine Dimensions & Weight Net machine weight: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system that improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, which adjusts the motor speed to the actual demand during the production cycle. As a result, electrical power is only consumed when actually required. Benefits of the ESS System: - Reduction of electrical energy consumption by up to 30% - Servo drive technology for hydraulic pumps - World-class, proven technology used in the plastics processing industry - Reduced energy losses during machine idle time - Lower hydraulic system heating - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows a significant reduction in machine operating costs while maintaining full production parameters.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 99.161 h, vpenjalna sila: 32.000 kN, premer vijaka: 130 mm, injekcijska masa: 8.100 g, skupna dolžina: 4.900 mm, skupna višina: 4.200 mm, skupna masa: 230.000 kg, Spritzgießmaschine mit hoher Schließkraft des deutschen Herstellers KraussMaffei zu verkaufen. Angeboten wird das Modell KM 3200-19000 MC, das speziell für die Herstellung von großvolumigen Kunststoffteilen und industrielle Anwendungen konzipiert ist. Mit ihrer enormen Schließkraft und großem Schussvolumen eignet sich die Maschine besonders für die Fertigung technischer Kunststoffteile sowie für hohe Stückzahlen im Großformat. Die Maschine verfügt über eine Schließkraft von 32.000 kN, einen Schneckendurchmesser von 130 mm und ein maximales Schussgewicht von 8.100 g. Dadurch ist eine effiziente Verarbeitung großer Materialmengen möglich. Zur Ausstattung gehören umfangreiche Peripheriegeräte, unter anderem eine Roboterschnittstelle für KUKA KRC4, ein sequentieller Einspritzcontroller S.I.S.E. IS’Tech, Temperiergeräte von GWK sowie ein Motan Colormetric Dosier- und Mischsystem. Ein Förderband ist ebenfalls inklusive. Technische Daten * Hersteller: KraussMaffei * Modell: KM 3200-19000 MC * Maschinen-Nr.: IMM MC3F No.12 * Baujahr: 1998 * Betriebsstunden: ca. 99.161 h Leistungsdaten Hedpfx Aeyt H Dhedrjfh * Schließkraft: 32.000 kN * Schneckendurchmesser: 130 mm * Maximales Schussgewicht: 8.100 g Abmessungen und Gewicht * Maschinengewicht: ca. 230.000 kg * Maschinentiefe: ca. 4.900 mm * Maschinenhöhe: ca. 4.200 mm Die Maschine ist eine zuverlässige und bewährte Lösung für die industrielle Kunststoffverarbeitung und besonders für Hersteller mit Bedarf an großdimensionierten Spritzgießkapazitäten attraktiv. Weitere Informationen, Fotos oder Besichtigungstermine gerne auf Anfrage.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 98.806 h, vpenjalna sila: 40.000 kN, premer vijaka: 130 mm, injekcijska masa: 8.100 g, skupna dolžina: 4.900 mm, skupna višina: 4.200 mm, skupna masa: 255.000 kg, # 🇫🇷 Annonce de Vente 2x KraussMaffei KM 4000-19000 MC – Presses à injecter – Année 1998 À vendre : deux presses à injecter identiques du fabricant KraussMaffei, modèle KM 4000-19000 MC, équipées d’une commande MC3F. Ces machines sont spécialement conçues pour la production de grandes pièces plastiques nécessitant une très forte force de fermeture. Les installations sont entièrement équipées, comprenant plusieurs périphériques pour l’alimentation matière et la gestion du procédé. ## Données techniques * Fabricant : KraussMaffei * Modèle : KM 4000-19000 MC * Commande : MC3F * Année de fabrication : 1998 * Heures machine : env. 98 806 h * Force de fermeture : 40 000 kN * Poids d’injection max. : 8 100 g * Diamètre de vis : 130 mm ## Dimensions & Poids * Profondeur machine : 4 900 mm * Hauteur machine : 4 200 mm * Poids machine : env. 255 000 kg Hfodeyt Hy Njpfx Adroh ## Équipements * Interface robot : KUKA KRC4 * Commande d’injection séquentielle : S.I.S.E. IS-Tech * Thermorégulateurs : GWK * Système de dosage et de mélange : Motan Colormetric * Convoyeur à bande ## Machines disponibles * Machine n°14 * Machine n°15 Les machines peuvent être achetées séparément ou en lot. Visite sur rendez-vous possible.

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 101.215 h, številka stroja/vozila: 23J01415, vpenjalna sila: 23.000 kN, injekcijska masa: 6.100 g, skupna dolžina: 4.500 mm, skupna višina: 3.800 mm, skupna masa: 205.000 kg, Zu verkaufen stehen zwei leistungsstarke Spritzgießmaschinen des renommierten Herstellers KraussMaffei, Modell KM 2300-14700 MC. Diese Maschinen sind für die Herstellung großvolumiger Kunststoffteile sowie industrieller Serienproduktionen konzipiert. Beide Maschinen bieten eine Schließkraft von 23.000 kN und sind mit einem Schneckendurchmesser von 105 mm sowie einem maximalen Schussgewicht von 6.100 g ausgestattet, was sie ideal für großformatige Spritzgießanwendungen und hohe Materialdurchsätze macht. Die Anlagen sind umfangreich mit Peripheriegeräten ausgerüstet, darunter eine Roboterschnittstelle für KUKA KRC4, ein sequentieller Einspritzcontroller S.I.S.E. IS’Tech, Temperiergeräte von GWK sowie ein Motan Colormetric Dosier- und Mischsystem. Zusätzlich ist ein Bandförderer im Lieferumfang enthalten. Die beiden Spritzgießmaschinen stammen aus den Baujahren 1997 bzw. 1998 und sind seitdem zuverlässig in einem industriellen Produktionsumfeld im Einsatz gewesen. Technische Details im Überblick: Maschine 1 - Modell: KraussMaffei KM 2300-14700 MC (IMM MC3F Nr. 6) - Baujahr: 1998 - Betriebsstunden: ca. 101.215 h Maschine 2 - Modell: KraussMaffei KM 2300-14700 MC (IMM MC3F Nr. 9) - Baujahr: 1997 - Betriebsstunden: ca. 99.030 h Hjdjyt Hidopfx Adrofh Gemeinsame technische Eckdaten: - Schließkraft: 23.000 kN - Schneckendurchmesser: 105 mm - Max. Schussgewicht: 6.100 g - Maschinengewicht: ca. 205.000 kg - Maschinenabmessungen: - Tiefe: ca. 4.500 mm - Höhe: ca. 3.800 mm Diese Spritzgießmaschinen bieten eine robuste sowie praxiserprobte Lösung für die industrielle Kunststoffverarbeitung und sind besonders für Betriebe von Interesse, die hohe Kapazitäten im großformatigen Spritzguss benötigen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Krauss Maffei KM 1300-12000 MX injection moulding machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for processing thermoplastics and is equipped with a complete plasticizing unit featuring abrasion protection. Technical Specifications Clamping Unit Clamping force: 13,000 kN Mould opening force: 910 kN Platen dimensions: 2210 × 1910 mm Tie bar clearance: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Hsdpfxeyrrwkj Adrofh Injection rate: 856 cm³/s Plasticizing Parameters Screw speed: 103 / 145 rpm Plasticizing rate (PS): - Standard speed: 122 g/s - Increased speed (option): 171 g/s Electro-hydraulic Equipment Nominal pump motor power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap 6: 765 cycles/h Hydraulic oil tank capacity: 2440 l Dimensions and Weight Net weight with control cabinet: 70 tons Installation dimensions: 13.03 × 3.65 × 2.82 m

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 13.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 39.240 kN, premer vijaka: 245 mm, razmak između stupova: 2.250 mm, tlak vbrizgavanja: 1.200 letvica, injekcijska masa: 47.685 g, skupna masa: 320.000 kg, ogrevalna zmogljivost: 354 kW (481,31 KM), PROIZVAJALEC: REAL PRESS Model / Tip: RP 4000 T Leto proizvodnje: 2011 Izdelano v: Italija Sila zapiranja kalupa (kN): 39.240 Razdalja med vodili (mm): 2.250 × 2.250 Premer polža (mm): 245 Vbrizgalni tlak (bar): 1.200 Maks. teža izstrelka (PS, g): 47.685 Ogrevalna moč (kW): 354 Moč črpalke (kW): 132 + 132 + 132 + 30 Skupna moč (kW): 790 Maks. debelina kalupa (mm): 2.200 Min. debelina kalupa (mm): 1.000 Hodpfoylwz Iox Adrefh Dimenzije stroja (D׊×V, m): 22 × 45 × 50 Teža stroja (ton): 320 Hod polža (mm): 245 Maks. količina staljene plastike na cikel (g): 34.333,2 Maks. teža izstrelka PE na 1 mm (g): 140,1355102 Mera fiksne prirobnice: ᴓ250 Mera premične prirobnice: ᴓ250 Robot: DA

Stanje: rabljeno, Leto izdelave: 1992, obratovalne ure: 17.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 40.000 kN, premer vijaka: 240 mm, razmak između stupova: 2.100 mm, tlak vbrizgavanja: 1.500 letvica, injekcijska masa: 48.000 g, hod izmetalca: 700 mm, skupna dolžina: 26.000 mm, skupna širina: 5.000 mm, skupna višina: 7.000 mm, skupna masa: 380.000 kg, MANUFACTURER: REMU Model / Type: RM 4000 Injection Unit: Production Year: 1992 Made In: Italy Mould Clamping Force (kN): 40,000 Space Between Tie Bars (mm): 2100 x 2100 Pump Motor (kW): Screw Diameter (mm): 240 Injection Pressure (bar): 1500 Max. Shot Weight PS (g): 48,000 Heating Capacity (kW): 235 Pump Motor (kW): 595 Total Power (kW): 830 Clamping Unit: Max. Mould Thickness (mm): 2000 Min. Mould Thickness (mm): 800 Ejector Stroke (mm): 700 Max. Daylight (mm): 4500 Oil Tank Capacity (l): 9,000 Machine Dimensions LxWxH (m): 26 x 5 x 7 Machine Weight (ton): 380 Screw Stroke (mm): 1400 Max. Shot Molten Plastic Weight (g): 34,560 Max. Shot Weight per 1mm (g): 24.69 Actual Value (g/h): 26.8 Max. Injection Weight PE (g): 35,136 Max. Injection Weight PP (g): 35,136 Machine Nozzle Radius: R34 Fixed Side Flange Size: Ø300 Moving Side Flange Size: Ø250 Air (fixed - moving): 2 + 4 Hydraulic Cores: 4 + 4 Mold Frigel Water Connections: 2'' Mold Hot Runner Control (pcs): 40 Valvegate System (pcs): 16 (active) Magnetic Plate: available Mold Carrying Capacity (fixed - moving) (tons): 21.8 - 18.7 Robot: available Hedpeylva Nofx Adrefh