Domaplast Kft.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax note and advantages for used machinery: As of 01.07.2025, even used machines are eligible for a special depreciation of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower 2-Colour 2-Component machine Control system: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h 1st Injection Unit 750 horizontal Injection unit / screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Injection unit / screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen distance: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Machine weight: 9,000 kg Extras Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water BGS: 6 circuits each on nozzle and ejector sides BluePower technology: up to 40% energy savings The machine is very well-maintained and can be inspected under power. Any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Delivery terms: ex works, loaded onto buyer’s truck, or free delivery within Germany with freight cost compensation. Hedpfoyf Uy Ujx Abhoh Further information about our offered machines and our company: - We only sell machines we have acquired from active production, ex stock Hanover. - All machines offered are inspected and tested before dismantling. - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All machines offered are available for inspection at our warehouse.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 98.780 h, vpenjalna sila: 2.000 kN, skupna masa: 12.200 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase this hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information on this machine. • Clamping unit • Mold weight (max.): 1500 kg • Moving total weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter, A-side: 110 mm • Centering ring diameter, B-side: 90 mm • Clamp system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (main) - Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (secondary) - Type 200W Hedpfx Abjyf H Nnehjh • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: ~6.8 kW • Machine axis travels • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear extraction robot ERC 23/1-E (included)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. Hsdjyf Htyjpfx Abheh • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 3.731 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DS901DA010011, vpenjalna sila: 2.750 kN, premer vijaka: 50 mm, tlak vbrizgavanja: 1.530 letvica, odmični hod: 610 mm, model krmilnika: ENDURA touch, TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Hsdpsyf Hfpjfx Abheh Injection pressure: 1,530 bar Max. injection flow: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Operator cabin protection: full safety cabin Tie bar arrangement: horizontal Oil tank capacity: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Dimensions (L x W x H): 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h EQUIPMENT Koch dosing system AUTOMATION EQUIPMENT Full safety cabin with safety door KUKA 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control unit Laser marking system with scanner and extraction unit Multi-level conveyor system with lifting unit Base frame and transfer station Base frame with automatic screw feeder 4-fold pick-off gripper 6827137 1+1 handling gripper 6827137 4-fold pick-off gripper 7936450 4-fold pick-off gripper 7936449 2+2 handling gripper 7936449 Note: The machine was operational until 2022 and was then professionally dismantled. It has not been used since.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211886, Stroj za brizganje plastike | Arburg Allrounder 630 S 2500-170 Hjdpfjyf Ha Hex Abhsh Zapiralna sila [kN]: 2.500 Število komponent: 3 Širina pritrdilne plošče [mm]: 900 Višina pritrdilne plošče [mm]: 900 Razmak med vodili vodoravno [mm]: 630 Razmak med vodili navpično [mm]: 630 Premer centrirnega obroča [mm]: 160 Minimalna vgradna višina [mm]: 400 Maksimalna vgradna višina [mm]: 700 Maksimalna odprtina [mm]: 600 Maksimalni hod izmetača [mm]: 225 Navoj [M]: 24 Tip večkratne rotacijske mize: rotacijska miza Premer rotacijske mize [mm]: 900 Navoj rotacijske mize [M]: 20 Največja teža orodja [kg]: 2.500 Največja teža orodja na premični strani [kg]: 2.500 Premer polža [mm]: EE1: 30, EE2: 25, EE3: 25 Največja masa vbrizga [g] PS: EE1: 83, EE2: 59, EE3: 58 Postavitev agregata: EE1: vodoravno, EE2: navpično, EE3: L-pozicija Oprema: Dvokratni izmet jedra, robot Ogled možen kadarkoli po dogovoru. #Tags: ARBURG | Multi 3K | 630S

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 98.495 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 25 mm, razmak između stupova: 370 mm, delovna prostornina: 74 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 59 g, minimalna višina orodja: 200 mm, izmetalna sila: 22.600 N, hod izmetalca: 100 mm, odmični hod: 600 mm, skupna dolžina: 3.500 mm, skupna širina: 1.400 mm, skupna višina: 1.910 mm, skupna masa: 3.000 kg, ogrevalna zmogljivost: 8,12 kW (11,04 KM), moč črpalke: 11.000 W, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Ponujamo ta rabljen KraussMaffei 50-180 CX stroj za brizganje, letnik 2006. Oznaka KM: 50-180 CX Mednarodna oznaka velikosti KM: 180 CX/50 Leto izdelave: 2006 Serijska številka stroja: 61009011 Teža stroja: 3.000 Hjdpfx Aboyf E Dqoheh Stanje: pripravljen za uporabo (rabljen) Obratovalne ure črpalke: 98495 Obratovalne ure avtomatskega dela: 83046 Opis: Premer polža: 25mm Zapiralna sila: 500kN Volumen brizga: 74cm3 Tlak vbrizgavanja max: 2500 bar Masa brizga: 59g Minimalna višina orodja: 200mm Max pot odpiranja: 600mm Max razdalja med ploščama: 600mm Razdalja med vodili: 370 Centrirni obroč brizgalna stran: Ø125 Centrirni obroč izmetalna stran: Ø125 Izmetalna sila naprej/nazaj: 22,6kN/9,9kN Hod izmetača: 100mm Dimenzija stroja (DxŠxV): 3500x1400x1910 mm Teža stroja: 3000kg Ogrevalna zmogljivost: 8,12kW Moč črpalke: 11kW Vrsta vhodnega toka: 400V, 50Hz standardni industrijski trofazna električna napeljava Oprema: dokumentacija Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 102.060 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, razmak između stupova: 420 mm, tlak vbrizgavanja: 2.429 letvica, minimalna višina orodja: 300 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.240 mm, skupna širina: 1.510 mm, skupna višina: 2.180 mm, skupna masa: 7.800 kg, ogrevalna zmogljivost: 10,97 kW (14,92 KM), moč črpalke: 18.500 W, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Ponujamo ta rabljen KraussMaffei 100-380 CX stroj za brizganje, letnik izdelave 2006. Stroj za brizganje plastike: KM 100-380 CX Mednarodna oznaka velikosti: KM 380 CX/100 Leto izdelave: 2006 Serijska številka: 61009013 Teža stroja: 7800 kg Stanje: pripravljen za uporabo (rabljen) Obratovalne ure črpalke: 102060 Obratovalne ure avtomatsko delo: 87744 Opis: Premer polža: 35mm Zapiralna sila: 1000kN Volumen brizga: 154ccm Tlak vbrizgavanja max: 2429bar Masa brizga: 59 ccm Minimalna višina orodja: 300mm Max pot odpiranja: 600mm Max razdalja med ploščama: 900 mm Razdalja med vodili: 420mm Centrirni obroč brizgalna stran: Ø125 Centrirni obroč izmetalna stran: Ø125 Izmetalna sila naprej/nazaj: 22,6/9,9 kN Hod izmetača: 150mm Dimenzija stroja (DxŠxV): 4240x1510x2180 mm Hedpfxjyf E Amj Abhsh Teža stroja: 7800kg Ogrevalna zmogljivost: 10,97kW Moč črpalke: 18,5kW Vrsta vhodnega toka: 400V, 50Hz standardna industrijska trofazna električna napeljava Oprema: dokumentacija Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp mechanism (three-platen system) featuring a servo-electric drive for the clamping unit. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing unit Complete unit for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle opening: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Opening width: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection throughput: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of cylinder heating zones: 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Hodoyft Nzopfx Abhoh Machine in a modern servo-electric configuration, offering high precision, energy efficiency, and process repeatability.

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 35.502 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 1207Q036, vpenjalna sila: 4.000 kN, premer vijaka: 80 mm, razmak između stupova: 700 mm, delovna prostornina: 2.010 cm³, tlak vbrizgavanja: 162 letvica, injekcijska masa: 1.890 g, minimalna višina orodja: 245 mm, izmetalna sila: 111.000 N, hod izmetalca: 205 mm, odmični hod: 655 mm, skupna dolžina: 7.700 mm, skupna širina: 1.950 mm, skupna višina: 2.240 mm, skupna masa: 15.500 kg, ogrevalna zmogljivost: 24,5 kW (33,31 KM), moč črpalke: 37.000 W, Oprema: dokumentacija / priročnik, Stroj Borche 400 ton, mlajši od 10 let. Splošno dobro stanje z manjšimi obrabami na nekaj vzvodnih zatičih. Poročilo o stanju stroja in video delovanja sta na voljo na zahtevo. Hsdeyftl Aepfx Abheh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 28.646 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It offers a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine features a linear robot system and a 9-zone hot runner mold temperature control unit. Take this opportunity to purchase the DEMAG El Exis S250/630-2300 electric injection molding machine. Contact us for further information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar distance (H x V): 630 x 630 mm • Platen size: 950 x 950 mm • Minimum/maximum mold installation height: 330 mm / 830 mm • Maximum daylight (open space): 1505 mm Hjdpfjyftamex Abhsh • Opening stroke: 675 mm • Ejector stroke/force: 200 mm / 80 kN • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating capacity: 14.8 kW • Hybrid drive power consumption: • Installed total power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Needle shut-off control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9-zone hot runner integrated • Interfaces: printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle time: 2.00 s • Noise level: 74 dB(A) • Owner’s note • Describes a hybrid high-speed machine equipped with a larger injection unit (Type 2300 vs. Type 840) than the above-mentioned stock machine. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): Hedpfoyfrb Nex Abheh • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment Hodsyfq Alepfx Abheh • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.250 kN, premer vijaka: 45 mm, delovna prostornina: 275 cm³, tlak vbrizgavanja: 1.878 letvica, injekcijska masa: 250 g, minimalna višina orodja: 300 mm, Krauss Maffei 125-520 C2 Splošne informacije Model: 125-520 C2 Leto proizvodnje: 2004 Krmiljenje: MC4 Teža stroja: 6000 kg Dimenzije (d × š × v): 4,5 × 1,5 × 2,2 m Zaporni sistem Zapiralna sila: 125 t Sistem zapiranja orodja: 125 / … Dimenzije plošč orodja: 745 × 770 mm Razmak med stebri: 470 × 470 mm Odpiralna pot: 600 mm Maksimalna razdalja med ploščama: 900 mm Višina orodja: 300 mm Izmetalna sila: 22 kN Hod izmetalca: 150 mm Vbrizgalna enota Vbrizgalna enota: … / 520 Premer polža: 45 mm Razmerje L/D polža: 20 Prostornina vbrizga: 275 ccm Hodpfxeyfntus Abhjh Masa vbrizga: 250 g Specifičen pritisk vbrizga: 1878 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 618 cm³, tlak vbrizgavanja: 2.183 letvica, injekcijska masa: 562 g, minimalna višina orodja: 400 mm, hod izmetalca: 180 mm, Engel VC 1350/200 Tech Hjdpfx Asyfnpvebhjh Zapiralna sila: 200 ton Leto izdelave: 2007 Teža: 14.200 kg Dimenzije (d x š x v): 6,3 x 1,9 x 2,3 m Vbrizgalna enota: .../1350 Premer polža: 55 mm Vbrizgalni volumen: 618 cm³ Vbrizgalna teža (za PS): 562 g Specifičen pritisk vbrizga: 2183 bar Sistem zapiranja orodja: 200/... Dimenzije orodnih plošč: 860 x 570 mm Montažna višina orodja: 400 mm Odpiralna pot: 750 mm Maksimalna razdalja med ploščama: 1150 mm Izmetna pot: 180 mm Izmetalna sila: 80 kN Oprema: - 2 × hidravlični jedri na gibljivi plošči - Pnevmatski ventil - 8 področij vročih kanalov - 8-conski rotameter

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, vpenjalna sila: 1.300 kN, premer vijaka: 55 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, injekcijska masa: 479 g, minimalna višina orodja: 300 mm, Zapiralna sila: 130 t Hedpfeyfnghjx Abhsh Leto izdelave: 2008 Teža vbrizga: 475,9 g Vbrizgalna enota 1000 Premer polža: 55 mm Specifičen tlak vbrizga: 1904 bar Volumen vbrizga: 523 ccm Teža vbrizga: 475,9 g Zapiralna sila: 130 t Dimenzije orodnih plošč: 745 x 745 mm Razmak med stebri: 470 x 470 mm Izmetalna sila: 22,6 kN Višina orodja: 300 mm Odpiralna pot: 600 mm Maksimalna razdalja plošč: 900 mm Teža: 8000 kg Leto izdelave: 2008 Krmiljenje: MC5 Oprema: - akumulator - priključek euromap 67 - 2x pnevmatski ventil - hidravlično jedro na premični plošči

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 1.500 kN, Oprema: dokumentacija / priročnik, Brizgalni stroj KM 150-700/C2 Enota za zapiranje Hjdpfxsyfm Ahs Abheh 1. Zapiralna sila: 1500 kN 2. Velikost plošče (š × v): 780 × 790 mm 3. Odpiranje kalupa: 600 mm 4. Razdalja med vodili (š × v): 500 × 500 mm 5. Minimalna vgradna višina orodja: 300 mm 6. Izmetni hod: 150 mm 7. Vroči kanal – število uporabljenih con: 12 8. Upravljanje pnevmatskih ventilnih zatičev: 1 kos Brizgalna enota 1. Premer polža: 45 mm 2. Vbrizgalni tlak: 2336 bar 3. Največja količina vbrizga: 305 cm³ 4. Največja masa vbrizga (PS): 278 g 5. Jedra: 2× hidravlični krog (BAP) 6. Polž - razmerje L/D: 22

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 2.000 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Razdalja med stebri V: 570 mm Razdalja med stebri H: 570 mm Tip: Horizontalen Pogon: Električni Hodpjyfh Uljfx Abhsh Delovne ure: 34.535

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, vpenjalna sila: 300 kN, Vpenjalna sila: 300 t Hsdpfx Asyfh Rmjbheh Premer vijaka: 60 mm Razdalja med stebri V: 720 mm Razdalja med stebri H: 720 mm Tip: Horizontalen Pogon: Hibridni

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, ARBURG A 1500 T 1600-400 rotacijska miza (29.279 h) (S&P 3786) Leto izdelave: 2014 Obratovalne ure: 29.379 ur Polž: 35 mm Tlak brizganja: 2500 bar Hedpfx Abeyff S Ujhjh Vsebina brizganja: 154 cm³ Zapiralna sila: 150 t Razdalja med vodili: 1500 mm Minimalna višina orodja: 400 mm Maksimalna razdalja plošč: 700 mm Mere: 4600 x 1900 x 2300 mm Teža: 11.000 kg Priključna moč: 22 kW Premer mize: 1500 mm, 2-postajna (180°) rotacijska miza, 4-kratni izvlek jedra, izpihovalna naprava, vmesnik za barvalno napravo, vmesnik HHG itd... Cena: na zahtevo Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) vklj. robot KUKA (S&P 3788) Leto izdelave: 2008 Obratovalne ure: 36.061 ur Polž: 40 HVF mm Vbrizgalni tlak: 2000 bar Vbrizgalni volumen: 201 cm³ Zapiralna sila: 150 t Razdalja med vodili: 520 x 520 mm Minimalna vgradna višina orodja: 250 mm Maks. razdalja med ploščama: 1000 mm Mere: 5100 x 1600 x 2700 mm Teža: 7.250 kg Priključna moč: 60 kW Hedpsyff S Isfx Abhjh Hidravlični akumulator, 4 x izvlek jedra, HHG vmesnik EM67, izpihovalna naprava, vključuje robotski sistem KUKA KR 5 arc, transportni trak, varnostna ograja Cena: po povpraševanju Kontaktna oseba: G. Ralf Schulz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 58.670 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Mounting platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Min. mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd./rev.: 23 kN Injection unit: Hedpfoydp Idox Abheh Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating power: 16 kW Cylinder heater control zones: 5 Oil capacity: 489 ltr. Dimensions and weight: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Vibration isolators - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 68.590 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Movable Platen Opening Force: 45 kN Movable Platen Closing Force: 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Distance (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Maximum Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force Forward/Return: 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Shot Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Hsdeydp D Ejpfx Abheh Electrohydraulic Equipment: Pump Motor Rated Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Control Zones: 5 Oil Capacity: 489 l Dimensions and Weights: Space Requirement approx.: 5.50 x 2.00 x 2.20 m Total Weight: 6600 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional Equipment: - 1x air valve - 2x core pull - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Hsdeydpvbopfx Abhsh Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, injekcijska masa: 1.464 g, skupna višina: 2.500 mm, skupna masa: 25.500 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, največja dolžina izdelka: 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection molding machine from Germany features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1200 cycles/h, it is ideal for high-volume production. Contact us for further information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Tie bar distance: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen size: 1270 × 1200 mm Hodpfx Aoydnp Hsbhoh • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Moving platen opening stroke: 1400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, vpenjalna sila: 3.430 kN, premer vijaka: 60 mm, skupna višina: 2.397 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 8.073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It offers a clamping force of 3,430 kN, a screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8,073 × 1,930 × 2,397 mm, it is a robust choice for precision blank pressing. Contact us for further information about this machine. • Installed heating capacity: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 • Interfaces: Euromap 67, Euromap 73 Clamping Unit: • Tie bar distance: 810 × 810 mm • Platen dimensions: 1,050 × 1,050 mm • Opening stroke: 700 mm • Mold height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kN Injection Unit: • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Holding pressure: 200 MPa • Theoretical shot volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0–350 rpm • Injection stroke: 270 mm Hsdpoydnbpsfx Abheh • Nozzle contact force: 39.0 kN