Cap-Warenhandels GmbH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Na voljo je brizgalno-pihalni stroj Bekum brez orodij. Industrija: farmacija, izdelek: plastične stekleničke, obdelovana prostornina stekleničke: 10 ml, proizvodna zmogljivost: 10 ml: približno 4800 kosov/uro, materiali: PE/PP, dimenzije stroja (D/Š/V): cca 6250mm/2200mm/2200mm, teža: cca 12000kg. Pogon za vrtenje rotacijske mize je očitno obrabljen. Injekcijski valj agregata pušča in prisotne so še druge puščanja. Možen je ogled na lokaciji. Predvidoma na voljo od julija 2026. Dedpsyz Ap Djfx Aplocg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.700 kg, dolžina obdelovanca (maks.): 165 mm, premer obdelovanca (maks.): 35 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of cavities: 6 Maximum output: 7,200 bottles/h Product dimensions Maximum preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Maximum neck finish diameter: 38 mm Neck height: 9–27 mm Maximum bottle height: 350 mm Maximum bottle diameter: 105 mm Maximum bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow moulding module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow moulding module: 6,300 kg Control cabinet: 1,200 kg Preform feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Dcsdpfx Apjyrfvgolsg Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10% Frequency: 50 Hz ±1% Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Industrijski pihalni stroj VOITH FISCHER model VK1-07, letnik 1979, trenutno v delujočem stanju. Djdpfx Aeyn Iuwsplecg Kompaktni stroj, primeren za proizvodnjo majhnih embalaž s postopkom pihanja. Oprema uporabljena v industrijskem okolju, na voljo za ogled v obratu v Albaceteju (Španija). Neto cena EXW Albacete. Cena po dogovoru.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Industrijski pihalnik BATTENFELD FISCHER model VK1-1, letnik 1988, trenutno operativen. Enopostajni stroj, uporabljen v industrijski proizvodnji embalaže s postopkom pihanja. Funkcionalna oprema, na voljo za ogled na lokaciji v tovarni v Albaceteju (Španija). Dodjyn Ityopfx Apljcg Neto cena EXW Albacete. Po dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 48.400 h, 1 kos rabljeni pihalni stroj Proizvajalec: Fischer - W. Müller Tip: FMB 3-120 Leto izdelave: 1999 Zapiralna sila: 120 ton Tip ekstruderja: 120/24 WT Akumulacijska glava: BFKS25, približno 17,75 kg Na stroju je možno proizvajati sode do velikosti 200 litrov. Dcsdpfx Apeynutmolog Video na voljo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 65 mm, skupna masa: 2.000 kg, skupna širina: 1.200 mm, skupna dolžina: 3.240 mm, skupna višina: 2.500 mm, moč: 35 kW (47,59 KM), Oprema: dokumentacija / priročnik, HDPE, PP ipd. ekstruder. Kupljen leta 2020. Deloval je le nekaj deset ur, zato je kot nov. Vakuumski dozirnik -> sušilni lijak -> z vodom hlajen obroč -> ekstruderski sod -> 4 ogrevalno/hladilna območja za cev -> ogrevan filtrirni del -> ogrevan, motoriziran dozirnik mase. Siemens frekvenčni pretvornik za nastavljivo hitrost. Na koncu je zobniška črpalka s spremenljivo hitrostjo za natančno doziranje plastike za zahtevnejše in bolj precizne aplikacije. Polž premera 65 mm iz materiala 38CrMoAlA, nitriran, razmerje dolžina:premer 30:1. 33 kW maks., 380–415V, 3-fazni. Trenutno shranjen v skladišču, vendar priključen, tako da si delovanje lahko ogledate na priloženih slikah. Dcjdpfjyh Nzcex Aplog

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 150 h, Funkcionalnost: popolnoma funkcionalen, moč: 35 kW (47,59 KM), Naprodaj: stroj za pihanje preform z avtomatskim podajalnikom, 4 kavitete, 3500-4000 kosov/uro za prostornine do največ 0,6L, premer vratu 38 mm, največji premer 65 mm, največja višina 230 mm, 35 žarnic, povprečna poraba 22 kW, poraba zraka pri nizkem tlaku 1600 L/min, tlak pihanja 25-35 kg/cm², poraba zraka pri visokem tlaku 2500 L/min, vključen hladilnik 5600 Kcal/h in 30 L/min. Dedpeyhh Nuefx Aplscg

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Capabilities for integration into the production line Dcedpfx Asyhbt Hspljg

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: SO133, Technical Data & Performance Specifications The SIPA SFR EVO3 is a rotary stretch blow molding machine designed for highly efficient production of PET bottles in modern beverage facilities. As a robust used piece of equipment for industrial packaging, it delivers reliable performance for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and accommodates a broad range of bottle sizes commonly used in the water and soft drink sector. Manufacturer: SIPA Model: SFR EVO3 Year of manufacture: 2017 Production speed: up to 18,000 bottles per hour Number of cavities: 8 Thread/Neck finish: PCO 28-1810 Bottle formats: Compatible with 0.5L, 1.0L, 1.5L formats Container type: Designed for handling PET bottles Bottle diameter (min–max, diagonal): 50–125 mm Bottle height (min–max, without neck): 80–349 mm Advanced Automation & Control Systems Engineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing cycles. Operator-friendly HMI and PLC-based controls support recipe management, process monitoring, and rapid format changes. The machine architecture emphasizes repeatability of pre-blow and blow phases, ensuring stable bottle quality even at high production speeds. Djdpfx Apsyhbihjljcg Automated process control with user-oriented HMI Efficient preform heating for uniform material distribution Quick-change features to support fast format changeovers Safety-interlocked protective covers and emergency stop switches for operator protection Integration Capability into Production Lines This blow molder can be seamlessly integrated into used PET filling lines, either as a stand-alone unit ahead of a filler or synchronized within a complete beverage production line. The supplied preform feeder and preform cooling systems facilitate smooth handling and stable production conditions, thus enhancing the overall efficiency of the line. Inline or stand-alone operation with standard conveyor interfaces Compatible with downstream filling, capping, and labeling machinery Flexible handling of 0.5L, 1.0L, and 1.5L formats Suitable for upgrades or capacity expansions of used packaging machines Machine Condition & Maintenance History The machine is currently in operation, demonstrating its readiness for deployment in an active production environment. Built in 2017, it offers a modern platform for operators seeking reliable performance and repeatable quality in PET bottle production. Its status as a fully functional used machine makes it a strong candidate for rapid integration into industrial packaging lines. Operating Performance & Versatility With 8 cavities and up to 18,000 bph, the SFR EVO3 combines speed and quality for demanding beverage...

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 39.000 h, številka stroja/vozila: SO134, Technical Data & Performance Characteristics This Nissei ASB ASB-50MB is a one-step, biaxially oriented stretch blow molding machine engineered for precise PET bottle production. Featuring a compact, rotary indexing platform, it integrates injection molding and stretch blow molding in a single cycle, ensuring exact neck finishes and uniform wall thickness distribution. This pre-owned machine offers reliable performance for beverage manufacturing and industrial packaging projects seeking a proven, cost-efficient solution. Manufacturer: Nissei ASB Engineering Model: ASB-50MB Year of manufacture: 2010 Process: One-step ISBM (Injection-Stretch-Blow Molding) Production speed: approx. 1,000 bottles/hour (bph) with 4 cavities Dedpfx Aeyhbf Aopljcg Cavities: Current configuration 4 (supports 1–6 cavities depending on the article) Bottle formats: 40 ml to 750 ml Container type: PET bottles Electrical data (nameplate): Heater 400 V AC, 6.1 kW; Motor 380 V AC 18.5 kW and 200 V AC 0.75 kW; 50 Hz Installed power (approx.): 25.35 kW Advanced Automation & Control Systems The ASB-50MB platform provides stable, repeatable operation with synchronized control of the injection, conditioning, stretching, and blowing stations. Its rotary indexing table ensures precise timing coordination between stations and supports high-quality bottle formation in a compact footprint. Operator interfaces facilitate routine adjustments and process monitoring, while integrated heating controls supply accurate temperature profiles for consistent preform conditioning. Rotary indexing one-step system with coordinated station control Dedicated heating power zone for precise thermal management Structured power supply at 50 Hz for stable operation Designed for rapid tooling and format changes within the compatible size range Integrated safety enclosures and interlocks for secure machine access Production Line Integration This stretch blow molding machine can be seamlessly integrated into a used bottling line or operate as a standalone PET container production unit. Its output can feed conveyors to downstream rinsing, filling, capping, and labeling machines in beverage and other industrial packaging applications. Standalone or inline configuration with downstream filling equipment Compatible with standard conveyor interfaces Format flexibility for 0.04 L to 0.75 L PET bottles Suitable for water, juices, carbonated soft drinks (CSD), and other PET applications in conjunction with suitable downstream systems Machine Condition & Maintenance History This used ASB-50MB is in operational condition. The machine has approximately 39,000 operating hours, corresponding to typical industrial usage, and still retains solid performance potential for new production environments. Operational readiness: operational Operating hours: approx. 39,000

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 33.000 h, številka stroja/vozila: SO135, Technical Data & Performance Specifications This single-stage, biaxially oriented stretch blow molding machine provides uniform PET bottle production with reliable throughput and a compact footprint. Manufactured by ASB INTERNATIONAL PVT. LTD. (Nissei ASB engineering), the ASB-50 MB combines injection molding, conditioning, and blow molding within a single machine, reducing handling steps and improving quality control—ideal for a used bottling line requiring a dependable supply of PET bottles. Manufacturer: ASB INTERNATIONAL PVT. LTD. (Nissei ASB) Model: ASB-50 MB Machine type: Single-stage biaxially oriented stretch blow molding machine Year of manufacture: 2006 Production speed: approx. 1,000 bottles/hour with 4-cavity mold Cavities: Configurable 1–6; supplied in 4-cavity configuration Formats: 40 ml to 750 ml (typical PET bottle sizes in this range) Containers: PET bottles Power supply: 400 V, 50 Hz Installed power (observed): approx. 20.1 kW Motor circuits: 380 V AC — 13.5 kW; 200 V AC — 0.5 kW Heating circuits: 400 V AC — 6.1 kW Advanced Automation & Control Systems The ASB-50 MB platform enables precise regulation of heating and stretch-blow parameters for consistent bottle quality across different formats. Standard single-stage automation synchronizes injection, conditioning, and blowing stations for reproducible results, with integrated interlocks and safety guards for operator protection. The quick-change mold system supports efficient format changes and minimizes downtime during product changeovers, as typical in industrial packaging and beverage production lines. Line Integration Capability Designed for PET bottle production upstream of filling, capping, and labeling machinery, this machine integrates effectively with conveyors, accumulation tables, and downstream filling equipment. The single-stage process eliminates the need for separate preform handling devices (like unscramblers, tippers, and elevators), simplifying line layouts in a used bottling environment. Format flexibility from 40 ml to 750 ml supports applications for water, juices, carbonated soft drinks (CSD), and other beverages, with appropriate molds. Machine Condition & Maintenance History Dcodjyhbfiopfx Aplog This used machine is offered in ready-to-operate condition and is suitable for immediate integration into an existing beverage production or packaging plant. As with any used stretch blow molding equipment, commissioning checks and routine maintenance are recommended to match installation with local utility conditions and product specifications. Operational Performance & Versatility The ASB-50 MB delivers stable output of approx. 1,000 bph in 4-cavity setup, with the option to reconfigure up to 6 cavities depending on tooling and process parameters. ...

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HY-43, premer vijaka: 110 mm, skupna širina: 2.500 mm, skupna dolžina: 8.500 mm, skupna višina: 9.500 mm, moč: 350 kW (475,87 KM), Oprema: dokumentacija / priročnik, Dvoslojni stroj za pihanje plastike je nova generacija opreme za ekstruzijsko pihanje plastike. Glavna uporaba je oblikovanje kajakov, kanujev, desk za deskanje in drugih velikih votlih plastičnih izdelkov. Stroj uporablja motor z visokim navorom in zadostno močjo za rezanje materiala. Stopljena plastika se iztisne v akumulacijsko glavo orodja. Ko material doseže nastavljeno prostornino, sistem za nadzor debeline stene neprekinjeno prilagaja razmerje odprtine. Iztisnjen material se oblikuje v predobliko, ki se nato oblikuje v končni izdelek. Djdpfex R R Igex Apljcg

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: SO128, Used Contiform Stretch Blow Moulding Machine This used Krones Contiform S14 stretch blow moulding machine is designed for high-capacity production of PET bottles in modern beverage manufacturing. With a maximum output of up to 25,000 bottles/hour, it is an excellent choice for businesses looking to increase capacity or upgrade a used bottling line with reliable second-hand industrial packaging equipment. The machine features a Siemens PLC and a Krones HMI for robust automation and user-friendly control. Neck-handling transfer ensures stable bottle guidance across formats, while the rotary design provides consistent performance in beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks (CSD), milk, edible oil, beer, wine, and spirits. The current setup is optimized for the 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated filling lines. Technical Specifications & Performance Data Manufacturer: Krones Series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Table height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (moulds): 14 Number of mandrels: 7 Number of grippers (infeed/outfeed): 7 Working direction: Counterclockwise Dcsdpfxox H Tgds Apljg Power supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine is equipped with a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V, 50 Hz, with 3 PH + N ensures stable, industry-grade performance. Safety guards and interlocked access points enable safe operation during production and format changeovers. The neck-handling design contributes to smoother format changes and reduces bottle scuffing. Integration into Production Lines This Krones Contiform S14 can operate as a standalone stretch blow moulding machine or be integrated into a complete beverage production line. It can be seamlessly connected with preform handling systems, high- and low-pressure air supplies, and downstream conveyors, leading to filling, labelling, and packaging equipment. The rotary platform and neck-handling transfer guarantee compatibility with typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink production.

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it achieves up to 13,000 bottles per hour and supports scalable outputs for medium- to high-speed lines. The machine is optimized for PET containers and is suitable for a range of beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones’ engineering ensures outstanding reliability, consistent bottle quality, and smooth changeovers. Designed as a versatile component for a used bottling line or as a stand-alone blow molder, this pre-owned system delivers precise preform handling, stable heating, and efficient blow performance. It features an Alaska neck finish, an 8-cavity configuration, and a clockwise operating direction, making it a proven choice for beverage manufacturing and industrial packaging applications where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Year of Manufacture: 2004 Configuration: Rotary Maximum Speed: 13,000 bph Container Material: PET Current Bottle Format: 0.5L No. of Cavities: 8 Thread/Neck Finish: Alaska Maximum Container Height: 350 mm No. of Grippers (infeed/outfeed): 6 No. of Mandrels: 180 Operating Direction: Clockwise Operating Height: 1470 mm Power Supply: 400 V, 3-phase, 50 Hz Operating Current: 331 A Operating Pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation and Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and rapid diagnostics. The control architecture supports stable preform heating profiles, precise blow cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are built into safeguard and access points to support consistent production with minimal downtime. Production Line Integration Capabilities Dcodpsx H Tf Tefx Aplog This blow molding machine can be operated as a stand-alone unit or seamlessly integrated into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Changeovers are streamlined around the 8-cavity rotary platform, while the Alaska neck finish provides compatibility with a wide range of closures and filling monoblocks throughout the beverage production process.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, višina izdelka (maks.): 380 mm, premer obdelovanca (maks.): 130 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of moulds: 6 Capacity for standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg 415V / 380V transformer dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Dodpfx Apex A Uu Eslecg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeding dimensions: 2,000 x 2,500 mm Preform feeding weight: 250 kg Feeding guides length: 2,000 mm Power supply Total power: 142 kW Main connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT 415V / 380V transformer Preform hopper and conveyor Preform feeding Feeding guides Adaptation to other voltages possible

Stanje: rabljeno, Leto izdelave: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Using a tipping device, preforms are unloaded from a container into the feed hopper. From there, the preforms are conveyed by an elevator belt with electronically controlled speed and are supplied via a chute and loading starwheel to the blow molding machine in a uniform orientation. The shape and size of the preforms are inspected, and defective preforms are ejected before being delivered to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated by infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are monitored by an optical pyrometer. Grippers feed and remove the preforms to/from the blow wheel. The blowing unit uses 'crocodile molds,' in which the stretching along the longitudinal axis is supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are extracted from the cavities by grippers and conveyed to the discharge station. Machine (additional info): Rotary blow molding machine Dcjdpfxsxyktlo Apleg Power: 58 kW Number of cavities: 8 units Number of bottles ejected per cycle: 202 units Blow pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water supply: 4 bar Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with container tipping device, preform elevator conveyor, preform inspection, heating ovens, blow wheel, bottle discharge, on-screen visualization Weight: 16,700 kg

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: s.p.a magic m.p. Tip: MGL2D. Ta pihalni stroj je popolnoma funkcionalen. Še vedno je v proizvodnji in si ga je mogoče ogledati po predhodnem dogovoru. Po želji lahko pošljem tudi videoposnetke. ZNIŽANJE CENE!!! Z 21.000 na 19.000 EUR! Djdpfoxxp Tbex Apljcg

Stanje: pripravljen za uporabo (rabljen), Na voljo je 13-slojna linija za izpihovanje folije Kuhne za proizvodnjo biaxialno orientiranih visokobariernih folij. Obseg debelin folije: 20µm-80µm, maks. širina folije: 1400mm, maks. izhodna zmogljivost: 400kg/h, ekstruderjev: 13 kosov, maks. tlak glav orodja: 500bar, Flexring šoba: 250mm/300mm, kalibracijska orodja: 200mm/225mm/250mm/280mm/300mm, izkoristek: 80%-90%. Laminirne folije: debelina varilnega sloja: 25µm-35µm, debelina tiskarskega sloja: 25µm-45µm. Monofolije: debelina krčljive prevleke: 23µm-28µm, debelina AF pokrovne folije: 25µm-45µm, debelina zgornje in spodnje folije: 75µm, debelina balonske folije: 25µm-31µm. Dokumentacija priložena. Ogled na lokaciji je mogoč. Dedpfx Apjw R Dh Eslocg

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.065.0, vpenjalna sila: 200 kN, New digital control system from BBM Dedpew Dcybefx Aplscg Two sets of extruder heads (see attached pictures)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Potpuno automatska linearna PET mašina za duvanje Potpuni servo pogon 4 kalupa do 2000 ml Kapacitet duvanja: 4000 flaša na sat (novi uređaj) Dedewrrcnepfx Aplocg Niska potrošnja energije

Stanje: rabljeno, Leto izdelave: 2006, Polavtomatski stroj za PET steklenice - ZENTRONIK ZR-7 1. Grelnik za segrevanje PET predoblik 2. Polavtomatski stroj za proizvodnjo PET steklenic Orodje: dvopolni za steklenice 5,0 litra (pokrovček 48 mm) Dcsdownzdaopfx Apleg Kapaciteta: pribl. 800 steklenic/uro Tehnično stanje: rabljeno, delujoče

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, La SMF COMBI 400 es una sopladora automática diseñada para la producción eficiente y de alta calidad de botellas de PET. Esta máquina combina tecnologías avanzadas para ofrecer un funcionamiento continuo y preciso con una intervención manual mínima, ideal para plantas de embotellado que requieren flexibilidad y alto rendimiento. VENTAJAS DE LAS SERIES HS Y COMBI: • Bajo consumo energético Dodpfx Ajwny Eioplscg • Construcción modular • Funcionamiento silencioso • Ahorro de espacio gracias a su diseño compacto • Cambio sencillo de tamaño de botella y tipos de cuellos • Sistema de control PLC avanzado con interfaz de usuario intuitiva • Memoria integrada en el PLC para almacenar los parámetros necesarios según el tamaño de botella a producir • Medición de temperatura pirométrica – Power Wizard BENEFICIOS CLAVE: • Sistema probado en condiciones ambientales exigentes • Unidad de formado potente con controlador preciso y mecanismo de ajuste cómodo • Espacio de transferencia mínimo para el sistema de distribución de aire • Operación sencilla, robusta y duradera PRINCIPALES PARÁMETROS: Cantidad de aire de soplado (25 BAR): 3,46 m³/h Material del molde: FORTAL

Stanje: dober (rabljeno), Proizvodna kapaciteta do 4000 steklenic/uro (odvisno od formata). Primerno za formate med 0,25 l in 3 l. Sestavljeno iz: Dodpfx Aowcggvoplecg • Peč za segrevanje preoblik (preform), sestavljena iz 6 grelnih modulov z vsakim po 8 infrardečih svetilk • Kolo za prenos preoblik • Dvostopenjski sistem pihanja s stisnjenim zrakom: nizkotlačno pred-pihanje in nato visokotlačno pihanje • Kolo za prenos steklenic • Dostavljeno z obračalcem palet DOKUMENTACIJA NA VOLJO

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Dedewa Rhrepfx Aplocg Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double winder by Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesion-promoting extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion-promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Further features include: integrated width measurement, C-Scan for profile measurement, web guiding system, corona treatment, and film draw-off. Included: one spare 5-layer FSBK die head with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external control terminal. Documentation available. On-site inspection possible. Dodpfx Asv T An Sjpljcg